Used Extraction System For Grinding Dust for sale (46,014)

Condition: excellent (used), Walther NOVA 2000 extraction and dust collection unit with 2 extraction arms Lsdpfxsivta Ne Ac Asrn mobile, on castors 2 units available In very good, ready-to-use condition!!!

Condition: excellent (used), Dust extraction and filtration system, Nedermann Type 663 with 2 extraction arms Lrodpfx Asiyyxcoc Aon In very good condition, directly from production!!!

Condition: new, Year of construction: 2025, functionality: fully functional, A frequency converter with a pressure transmitter automatically adjusts the fan's output to the actual demand. Right-hand version with connection diameter: 350 mm, including flange. JET cleaning system. Motor power: 15.0 kW Filter area: 50.2 m² Nominal volume flow: 6927 m³/h Maximum volume flow: 10000 m³/h Negative pressure at 20 m/s in the intake nozzle: 3620 Pascal (in a dusty state) Lrodpfxsy T Rg Is Ac Ajn Collection volume: 4 x 160 liters 5-meter connection cable with 32A CEE plug.

Condition: new, Year of construction: 2025, functionality: fully functional, Right-hand version with connection diameter: 350 mm, including a flange JET cleaning system Motor power: 11.0 kW Filter area: 50.2 m² Lrodpsy T Rdmefx Ac Ajn Nominal volumetric flow rate: 6927 m³/h Maximum volumetric flow rate: 8000 m³/h Negative pressure at 20 m/s in the intake nozzle: 3162 Pascals (in the dust-laden state) Collection volume: 4 x 160 liters 5-meter connection cable with 32A CEE plug

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade fair machine *available upon request New: With the frequency converter option, up to a maximum of 45% can be eligible for government subsidies. Combination of: mütek briquetting press MPP 60 + dust extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected. 1. Technical data of the briquetting press: Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in use with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquet diameter: 50 mm Front socket: 50 mm Briquet stroke max.: 40 mm Briquet stroke opt.: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Ledpfx Aced Su Hxo Aorn Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery is also possible in 2 parts Weight: approx. 1200 kg, Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Option: cooling of the press jaws: no Option: cooling of the hydraulic oil: yes Option: level monitoring: yes CE compliant 2. Technical data of the clean air dust extraction unit MMJET 350: Dust extraction connection diameter: 350 mm Motor: 11 kW Dust extraction nozzle on the left (when standing in front of the dust bin) Residual dust content:

Year of construction: 2022, condition: new, Highlights of our two extraction systems Eco 3000 and Eco 5000 +Solid sheet metal construction ensures ideal flow conditions +resistant wind impeller +constant extraction performance even under constant stress + Connection of up to a maximum of 3/4 machines possible using the supplied distributors +high suction power due to large filter surface (filter dimensions: ø500x1100mm) +Integrated driving device for easy manoeuvring Scope of delivery: Running gear, filter and chip bag, distributor (connection for 3/4xø100mm suction pipes), incl ---- Device available in two designs: *in the following marked with position 1) and 2) 1) Extraction system Eco 3000 - 1.5 kW * with a chip bag and an industrial polyester filter Motor power S1 in W 1500 Installation dimensions in mm 985x560x2250 Extraction capacity in m³/h: 3,000 Suction outlets 3x (ø100mm) Negative pressure in Pa: 2200 2) Extraction system Eco 5000 - 2.2 kW * with two chip bags and two industrial polyester filters Ledpfx Acsidma No Aern Motor power S1 in W 2200 Installation dimensions in mm 1540x560x2270 Extraction capacity in m³/h: 5,000 Suction outlets 4x (ø100mm) Negative pressure in Pa: 2600 --- Information applies to both devices: Sound pressure level in dB(A) < 85 dB Voltage: 400V / 50Hz *Option: also available in 230 V Chip bag diameter in mm: 500 Chip bag length in mm: 850 Delivered in a box for self-assembly in a few steps The filters must be cleaned manually at regular intervals. Surcharge for suction with automatic cleaning + €4,700 net

Condition: used, Year of construction: 2003, machine/vehicle number: 519553, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Extraction fans: 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return Lsdoywd I Tepfx Ac Asrn - incl. galvanized ducts - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall igned for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: excellent (used), Year of construction: 2023, For sale is a used Felder RL-140 automatic clean air extraction unit with a maximum air flow rate of 2500 m³/h. The extraction unit has been inspected and refurbished by our service team and is in very good condition. Technical data: - Max. air flow rate 2500 m³/h - H3 dust-tested - Automatic filter cleaning - 10 m³ filter area - Extraction port diameter 140 mm - Motor power 3 kW / 4.1 HP - Year of manufacture 2023 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-T03VW Lodpoza Dz Rofx Ac Aern

Condition: used, Year of construction: 2018, functionality: fully functional, overall weight: 250 kg, Grinding table, model NESTRO, with 2 suction cups, year of manufacture 2018, in new condition. Lrodpoxltruefx Ac Aen

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake manifold diameter: 350 mm, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, Schuko Intermediate Filter System “Eco Var 04” Professional dust extraction system Schuko Eco-Var 04 (year of manufacture 2004) – complete system including piping, control system, and emission permit. For sale is a powerful and fully functional industrial dust extraction system from the premium manufacturer Schuko, type Eco Var 04 (year of manufacture 2004). The system is ideally suited for woodworking companies for efficient extraction of chips and dust and is offered including an extensive pipe and control system infrastructure. Technical data & equipment • Manufacturer: Schuko • Model series: Eco Var 04 (intermediate filter system) Lrsdpszddwgefx Ac Aen • Year of manufacture: 2004 • Drive power: approx. 11 kW (powerful, efficient fan) • Discharge: Rotary valve airlock with 5 sealing lips (ensures safe, pressure-loss-free material discharge into containers, silos, or briquetting presses) Extensive accessories & infrastructure (included) • Pneumatic valves: approx. 20 units for automatic shut-off of individual machine connections. • Pipe & hose system: approx. 80 meters of robust extraction pipe including the corresponding flexible hoses. • Pneumatic infrastructure: compressed air connections including all associated pneumatic hoses for valve control. Product advantages & condition • Complete package: No tedious searching for individual parts – from the filter system to the piping and the complete control and pneumatic system, everything is available for workshop installation. • Robust industrial quality: The Eco-Var series from Schuko is known for its durability, high filter area, and reliability in daily workshop use. • Energy-efficient: Thanks to the approx. 20 pneumatic valves, the extraction performance is only provided where work is currently being carried out, which saves a lot of energy. Note for buyers: The system is in a well-maintained and fully functional condition, appropriate for its age. Inspection can be arranged.

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock Ljdpjy N Duqjfx Ac Aorn

Condition: used, Oil Mist Extractor, Emulsion Mist Collector, LOSMA AS.7 Oil Mist / Emulsion Mist Separation Unit – Aspirofilter (2000), Used Machine Manufacturer LOSMA S.r.l. (Curno, Bergamo, Italy) Model AS.7 Overall Dimensions Width: 540 mm Depth: 580 mm Height: 610 mm Technical Specifications Year of Manufacture: 2000 Type: Oil Mist and Emulsion Mist Extraction Unit Series: Aspirofilter Lredpfxezdgawo Ac Asn Condition: Used machine. Manufactured in 2000. Filter replacement required. Suitable for industrial oil mist and coolant mist filtration applications.

Condition: good (used), Code: 0306 Brand: VM Model: 2/18 Lrodpfxoymfiij Ac Asn Suction system with 18 sleeves and 2 collection bags for carpentry workshops, furniture factories, sawmills, woodworking shops and various Technical data: N° 18 filtering sleeves N° 2 collection bags Motor Hp 7,5 Electrical panel Overall dimensions: mm 2800 x 1200 x 3200 h

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² Lodpfxsyq Nl Ne Ac Ajrn - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% - Stock No.: 1109

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Lredpfsl Dw U Djx Ac Asn Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is insufficient to maintain air quality in the workshop. Side-mounted ducts with a pollution capture point draw in contaminated air and direct it to the filter section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses clean the cartridge filters automatically at required intervals. After the compressed air hits, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, which results in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges, each 36 m2) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of manufacture - 2010 Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg Lredpfx Aeib Dadjc Asn

Year of construction: 2014, condition: excellent (used), Professional, pneumatic cleaning booth with dust extraction. Lodpfx Acjhm E S Ao Aorn It is used in power plants, cement and gypsum factories, mills, and companies involved in mixing, including the chemical industry, as well as in metallurgy, where dust can have a very negative impact on the health of personnel. By using cleaning booths, we prevent the spread of dust and hazardous substances to restrooms, changing rooms, etc. The booth provides personnel with a simple option to clean themselves during work, e.g., before morning and lunchtime breaks, and at the end of the shift. Dust extraction unit, EX version. Year of manufacture: 2014 Filtration area: 16 m2 Capacity: 2500 m3/h Negative pressure: 2400 Pa The unit is in very good condition.

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Lrjdpox Da Tisfx Ac Asn Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 8011510B, functionality: fully functional, filter area: 72 m², production capacity: 80,000 unit/h, Equipment: CE marking, TECHNICAL DETAILS Capacity: 80,000 m³/h Number of filter bags: 384 pcs Filter length: 2,500 mm Filter diameter: 230 mm Filter area: 72 m² MACHINE DETAILS Connected load: 15 kW Weight of upper section with motors: 4,000 kg Weight of intermediate section with filter sleeves: 4,000 kg Weight of lower section with legs: 2,000 kg Main fan: 12 pcs Power of main fan: 15 kW Nominal air flow: 22 m/s EQUIPMENT Return lines Control cabinet CE marking Extinguishing system Control cabinet Lrjdpfx Aoy Ai Tfoc Ajn Shaking system Vacuum installation Note: The machine has already been dismantled.

Condition: used, ISAM ESAB submerged arc welding system for cylinder coating No. 01 ESAB submerged arc wire welding systems No. 01 ESAB welding sources mod LAF 1250 DC (output 40 – 1250 A – NOMINAL POWER 1250 A/44V/100%) Nr 01 Command pulpit Lrsdpfxetq Ar Ts Ac Ajn No. 01 positioned for rollers with a diameter of approximately 400 x approximately 4000 mm Sand supply system for submerged arc welding Matr 208202

Condition: ready for operation (used), Year of construction: 2018, We offer for sale a industrial extraction and filtration system designed for efficient removal of sawdust, wood chips, and dust from woodworking machines. The system is suitable for medium to large production facilities and ensures high filtration efficiency with stable and reliable performance. Key Features & Benefits High-capacity central extraction system Designed for woodworking industry (chips, sawdust, dust) Complete filtration with clean air return to production hall Robust industrial design High filtration efficiency (approx. 99.985%) Integrated multi-branch extraction system Technical Specifications Filter Unit Model: FZŠ-H-C-7 Filtration area: approx. 528 m² Number of filter hoses: 352 pcs Separation efficiency: 99.985% Dimensions Approx. 8,081 × 2,450 × 6,245 mm Cleaning System Automatic cleaning via 6 vibration motors (EVK 150 W each) Extraction Performance The system includes multiple extraction branches with different capacities: Branch 1: approx. 13,700 m³/h, 18.5 kW Branch 2: approx. 10,900 m³/h, 15 kW Branch 3: approx. 10,900 m³/h, 15 kW Branch 4: approx. 10,900 m³/h, 15 kW Branch 5: approx. 8,350 m³/h, 11 kW Branch 6: approx. 8,350 m³/h, 11 kW Fans included: 1 × 18.5 kW 3 × 15 kW 2 × 11 kW Total Installed Power Approx. 89.7 kW System Description Central filter with multi-branch ducting system Suitable for connection to multiple woodworking machines (e.g. saws, CNC, optimizing saws) Chip and dust separation with air recirculation Designed for continuous industrial operation Lrjdpfx Acezgtkme Asn Condition & Sale Terms Condition: Good working condition Complete system available (filter + fans + ducting as per scope) Dismantling and transport to be arranged by the buyer Additional Offer A smaller and newer version of this extraction system is also available for sale: Installed power: approx. 29.5 kW Suitable for smaller production capacities Advantages High performance and filtration efficiency Proven industrial solution Scalable for different production setups Reliable and low-maintenance operation

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0118703/99-1, functionality: fully functional, power: 55 kW (74.78 HP), input voltage: 400 V, type of input current: DC, volume flow: 1,200 m³/h, intake manifold diameter: 150 mm, filter area: 8 m², For sale is a Bristol 'TF' B 250 extraction unit. The item is in good condition and is ready for immediate use. Lrjdpfx Acoy R Ax Ro Aon Device type: Extraction unit Model: BRISTOL 'TF' B 250 Motor power: 0.55 kW Airflow: 1,200 - 1,500 m³/h Connection voltage: 400V / 50Hz Extraction spigot diameter: 150 - 200 mm Application areas: Oil mist, emulsion mist, dust Year of manufacture / Serial number: 1999 / 0118703/99-1 Transport and loading can be organized throughout Europe at an additional cost, upon request. All prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, please visit our website.

Condition: excellent (used), Year of construction: 2000, For sale is a Höcker Polytechnik Vacumobil system. The unit is fully functional and can be inspected and tested on site. The sale is carried out on behalf of a customer. Machine location: Friedeburg region. Machine details: - Year of manufacture: 2000 - Extraction diameter: 300 mm - Motor power: 7.5 kW Lrsdsylciwopfx Ac Ajn - Nominal air flow rate: 5320 m3/h - Mobile on castors Price is net, plus VAT. An invoice for the machine will be issued. Shipping of the machine can be arranged at additional cost. Feel free to contact us with any questions or if you are interested! Your JG Holztechnik Team from 26188 Edewecht.

Year of construction: 2003, condition: good (used), machine/vehicle number: FA/07/RE/1612/3, For sale: Complete industrial extraction system consisting of 6 Colt Coltair roof fans, including the corresponding control cabinet/central control unit. This system was used for ventilation and extraction in a warehouse measuring approximately 90 x 25 x 12 meters and has been decommissioned in working condition. The entire set has been professionally dismantled and is preferably sold as a whole. The fans are suitable for, among other things: - Welding fume extraction - Fume extraction Lredpfxey Hw Avo Ac Asn - Ventilation of workshops and warehouses - General industrial air exchange Technical data per fan Brand: Colt International Ltd Product: Coltair Fan Unit Type: FA/07/RE/1612/3 Power supply: 400V Motor: 3-phase Output: 0.60 / 0.40 kW Speed: 900 / 650 rpm Capacity: 3.62 / 2.85 m³/s Converted per fan: approx. 13,032 / 10,260 m³/h Total capacity for the complete set Approx. 78,192 m³/h on high setting Approx. 61,560 m³/h on low setting What is included: - 6 roof fans - Complete control cabinet / control unit - Used, well-maintained industrial set - Professionally dismantled in working order Inspection possible by appointment. Loading on site by arrangement. Relevant keywords roof fan, extraction fan, industrial ventilation, welding fume extraction, warehouse ventilation, extraction system, 400V fan, Colt Coltair, roof extraction, industrial extraction set

Condition: used, functionality: limited functionality, input voltage: 400 V, input frequency: 50 Hz, intake manifold diameter: 300 mm, actuation type: electric, Used stationary extraction system installed in a good, tightly sealed cabinet with external electrical control box. Automatic electric filter shaking. Dismantled, immediately available from Barneveld. 300mm connection. Ljdpsy Ihwtjfx Ac Asrn