Used Extrusion for sale (337)

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Cedpfx Aszt Sb Dsb Dorg Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Year of construction: 2008, condition: good (used), This extruder line from Kuhne is in machine storage at Plastima Used Machinery. The machine is from 2008 and in excellent condition. Brand: Kuhne GmbH Model: K 60E - 33D Screw type: single screw Year of construction: 2008 Screw diameter Ø: 600 mm Crjdpfx Asyxn T Nob Deg L/D ratio: 33 Cylinder height: 425 mm Cone height: 325 mm Total height: 750 mm

Condition: ready for operation (used), Year of construction: 2024, operating hours: 2,489 h, travel distance X-axis: 400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 440 mm, number of axes: 3, This 3-axis HAGE 3D Mex-One-A was manufactured in 2024. It features a build area of 400 mm x 600 mm x 440 mm and a heated print bed that reaches up to 180 °C. The machine is designed for unmanned 24/7 operation and includes an advanced filtration system for effective exhaust air purification. If you are looking to get high-quality 3D printing capabilities, consider the HAGE 3D Mex-One-A plastic 3D printer we have for sale. Contact us for further details. • Fused Filament Fabrication (FFF/FDM) • Total Machine on Hours: 4,294 h • Extruder 1 Hours: 1,914 h • Extruder 2 Hours: 575 h • Total Printing Hours: 2,489 • Heated Build Chamber: Up to 100 °C • Heated Print Bed: Up to 180 °C • Maximum Nozzle Temperature: 450 °C • Layer Thickness: From 0.05 mm • Traverse Speed (XY): Up to 250 mm/s • Printing Speed: Up to 200 mm/s • Build Rate: Up to 150 g/h Cedpszk Erqofx Ab Dsrg • Print Head: Water-cooled Dual DSD • Extrusion Pressure: Adjustable • Nozzle Diameter: 0.1–1.0 mm (0.4 mm standard) • Inactive Nozzle Lift: Free stroke • Part Cooling: Up to 4.8 m³/h • Automatic Print Bed Calibration: Multi-point topography measurement • Exhaust Air Purification: Activated carbon and HEPA filtration • Engineering Plastics Capable: Yes • CE Marked: Yes Drying Chamber (DCU), 2024 (optional, not included) • Internal Dimensions (X/Y/Z): 630 × 390 × 260 mm • Capacity: 3 Movable Small Spools (Upper Section) • Capacity: 2 Movable Large Spools (Lower Section) • Maximum Drying Temperature: 100 °C • Filament Feed: Direct Feeding from the Chamber with up to 4 Spools • Automatic Air Exchange and Moisture Removal • Tempering Chamber Internal Dimensions (X/Y/Z): 418 × 601 × 401 mm • Loading Areas: 3 Loading Positions for 600 × 400 mm Sheets or Grids • Maximum Tempering Temperature: 200 °C • Simultaneous Operation of Drying and Tempering Chambers • External Dimensions (X/Y/Z): 1,600 × 695 × 580 mm • Total Weight: Approx. 100 kg • Control: Siemens LOGO! • Maximum Power Consumption: 6 kW • Electrical Connection: Three-Phase AC 230 V, 16 A Fuse per Phase

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Zhejiang Baina 150 20D 1000Kg/h extruder The extruder is almost new and is available immediately with a few operating hours. Manufacturer: Zhejiang Baina Type: E150-01-00 Year of manufacture: 2020 External dimensions (L × W × H): 4200 × 1600 × 1500 mm Side rollers; the driving force is provided by the screw, with active dosing Coordinated operation of the feed roller gear drive and the screw drive, with automatic lubrication system Screw material: 38GrMoAcA Screw hardness: HRC 65–68 Steel bushing hardness: HRC 65–70 Crodpoy Ez Erefx Ab Dsg Nitriding depth: 0.4–0.7 mm Screw design: Design with suction groove for vacuum suction Pressure control, pressure protection value adjustable between 0–35 MPa; with temperature sensor. Screw diameter: 150 mm Screw speed: 1–50 rpm Maximum output: Approx. 1000 kg/h Number of heating stages / output: 7 × 6 kW Cooling stage: 1 stage (side rollers) Vacuum pump output: 2.2 kW Temperature control Automatic heating and cooling control with electromagnetic valve Circulation pump: Weile Cooling water pressure: 0.15–2 kg/cm² Temperature control accuracy: ±1 °C Screw and gear connection: Involute gear connection Motor and reducer drive: Belt drive Hardened gear type: ZLYJ420-28-I (involute gear reducer) Motor power: 160 kW Total installed power: 204 kW Speed ​​control: Frequency converter control

Year of construction: 1990, condition: good (used), This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is in the machine storage of Plastima Used Machinery. The machine, a model Haul-Off R630/6V, dates from the year 1990. Brand: Battenfeld Extrusionstechnik GmbH Crsdorrv Uwepfx Ab Dog Model: Haul-Off R630/6V Year of manufacture: 1990 Voltage: 380 V Power: 4,5 kW Pipe diameter max: 110 mm to 630 mm

Year of construction: 2009, condition: used, Used Baker Perkins model MP24PH 40:1 L/D twin screw extruder. - Manufacturer: Baker Perkins - Model: MP24PH 40:1 L/D - Number of screw: Twin Screw Extruder - Rotations: co-rotating - Screw speed range: 0 - 600 rpm - Motor power: 11.2.5 kW, variable speed Barrel: - Maximum operationg temperature: 200°C - Nominal barrel lenght: 40:1 L/D - Barrel type: one piece horizontally split clamshell barrel - Heating: electrically heated via cartrige type heaters Crodozvn Dajpfx Ab Dog - Cooling: water-cooled via cored barrel backing block Includes: - Touch HMI integrated in switchboard - Single screw powder feeder - Liquid feed system - liquid hopper, gear pump and flow meter

Year of construction: 1990, condition: used, LIQUIDATION SALE – IMMEDIATE AVAILABILITY Due to the closure of the production facility, we offer for sale a complete used technological line for the production of ceramic products, consisting mainly of HANDLE and KELLER equipment. Crodpfx Aoy Nzprob Dsg Complete production line price: EUR 400.000 net, EXW, negotiable. To facilitate a quick sale, we also offer: • the complete production line, • individual production sections, • individual machines and equipment. Prices for individual machines are available upon request. Reasonable offers will be considered. Preference will be given to buyers able to complete the transaction and collect the equipment quickly. The line consists of the following machines and equipment: 1. Raw material pre-processing section • HANDLE R469 edge runner, year of manufacture 1955 • AGW 1065/1085 roller crusher, year of manufacture 1963 • WF 1080A roller crusher, year of manufacture 2005 • Belt conveyors – 4 units • Control cabinet 2. Forming section • HANDLE MDVG 920B mixer, year of manufacture 1990 • HANDLE PZG 56A/50 extrusion press, year of manufacture 1990 • KELLER type 4155 cutter, year of manufacture 1990 • Belt conveyors – 4 units • Control cabinet The equipment is characterized by robust construction, durability and straightforward maintenance. The production line was in continuous operation until the end of 2025 and is available for inspection at the plant in Panoszów, Poland. The machines are available immediately. Quick completion of the transaction and prompt collection are preferred. Please specify in your inquiry whether you are interested in the complete line, a production section or a particular machine. Additional technical information, photographs and individual prices are available upon request.

Condition: like new (used), Stainless 8Kg hopper with agitator and stainless screw, variable speed, variety of extrusion plates for different style pastas, mobile Csdpfx Abjd R D Tlo Dsrg

Year of construction: 2026, condition: new, functionality: fully functional, Conical laboratory single-screw extruder EX 60/30 The extruder is designed for processing light, free-flowing granular materials. Due to its screw size, the extruder is suitable for laboratory and testing applications. The nitrided screw with a conical inlet section is fed with materials via a hopper, which then flow through the large inlet opening into the cylinder. Subsequently, the raw materials are compressed in the cylindrical screw section and discharged through a die. A direct drive with an upstream thrust bearing forms the drive train. Ceramic heating bands also allow for high processing temperatures. Credpfx Abezhamwo Dsg A shielding cooling system is installed between the material hopper and the first heating zone. Optionally, we also offer the following machines: The strands are passed through a water bath with a stainless steel tank to the strand granulator. A screen changer can also be offered as an option between the extruder and the die. Screw speed 150 Current 29.5A CEE-63A

Condition: used, Year of construction: 2012, machine/vehicle number: SO141, Used MORETTO EPL 5-8 N blow molding machine - Year 2012Technical Specifications & Performance DataThis extrusion blow molding machine is engineered for producing hollow plastic containers with high repeatability and efficiency. Manufactured by Magic with a full-electric drive concept, it is equipped for industrial packaging and beverage production environments where precision, uptime, and energy efficiency are critical. It suits used bottling line upgrades and second hand equipment integrations requiring robust blow molding capabilities.Blow molding process: Extrusion blow molding, full electricMaximum blown container volume: 8000 cm³Clamping force: 100 kNSpeed: around 200 Unit/hour for ( Distilled water container ) Dry cycle time: 2.2 sOpening stroke: 250 mmMaximum mold dimensions (L × P × A): 425 / 2x130 / 400 mmGeneral electrical power: 15 kWTotal installed electrical power: 64 kWExtruder screw diameter: 70 mmExtruder L/D: 24 L/DExtruder motor power: 35 kWExtruder heating zones: 5Extruder heating power: 10.6 kWSingle extrusion head max die diameter: 100 mmHead heating zones: 4Head heating power: 3.8 kWMachine footprint (W × L × H): 1900 × 5050 × 3250 mmTotal system weight: 7000 kgNoise level: 75 dB(A)Advanced Automation & Control SystemsThe full-electric architecture enhances precision and repeatability while minimizing energy consumption and maintenance compared to hydraulic systems. Fast dry-cycle performance supports higher throughput and stable cycle times. Temperature control across multiple heating zones on the extruder and head ensures consistent parison quality and stable process control for demanding industrial packaging applications.Full-electric drive for efficient, clean operationMulti-zone temperature management on extruder and die headStable, repeatable dry cycle for consistent productionOperator-friendly adjustments and setup for mold changesProcess reliability suitable for stringent quality requirementsProduction Line Integration CapabilitiesThis machine integrates smoothly within a used bottling line or a mixed-manufacturer production environment. It comes with a comprehensive set of auxiliaries to streamline upstream and downstream handling, supporting end-to-end beverage production or industrial packaging workflows.Included auxiliaries: hopper feeders, suction unit, dryer, granulator, cooler, color mixer, conveyorsAuxiliaries brand: Moretto (most components purchased new in 2012)Inline or standalone operation for flexible layoutsSupports diverse container geometries enabled by robust clamping and mold size window... Credozrgqkepfx Ab Dog

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, power: 52 kW (70.70 HP), screw conveyor diameter: 49 mm, machine/vehicle number: DE27566, TECHNICAL DETAILS Csdpfxozd Scpj Ab Dorg Capacity: 150 – 250 kg/h Screw diameter: 2 x Ø 49.7 mm L/D ratio: 32D MACHINE DETAILS Motor power: 52 kW (DC) Control system: analog, contactor-controlled system EQUIPMENT Synchronous motor Degassing Vacuum pump

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 467 h, total length: 840 mm, total height: 1,020 mm, total width: 750 mm, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 510 mm, space requirement length: 840 mm, space requirement height: 1,020 mm, space requirement width: 750 mm, 3D printer Evotech EL 102 – professional-grade machine with a large build volume. Original price: €60,000. Inspection possible in Upper Bavaria. Only 467 operating hours! For sale: an Evotech EL 102, a professional FDM/FFF 3D printer manufactured in Austria. This machine is ideal for prototyping, small-batch production, and the manufacturing of functional components with the highest quality requirements. Price negotiable. Technical specifications: Crsdpfoztn Dzjx Ab Dsg - Model: Evotech EL 102 - Printing process: FDM/FFF (Fused Filament Fabrication) - Build volume: approx. 500 × 400 × 510 mm - Extruder: 2 independent extruders (dual extrusion) - Nozzles: 0.4 mm standard (replaceable, other sizes optional) - Layer thickness: 0.05 – 0.6 mm - Print bed: heated, PEEK or metal print plate - The print bed is equipped for mounting print plates with a vacuum system. - Automatic print bed calibration before program start. - Materials: ABS, PLA, PETG, PA, PEEK…, technical filaments with CF+GF and support material. - Two independent filament drying chambers for a better and cleaner process. - Print head and drive servos are cooled. - Temperatures: Extruder up to 410 °C, heated bed up to 120 °C, build chamber heating up to 100°C - Software: compatible with Simplify3D, Cura, Slic3r - File formats: STL, OBJ, G-Code - Power supply: 400 V, 50/60 Hz - Dimensions: approx. 840 × 750 × 1020 mm - Weight: approx. 500 kg Features & Advantages: - Stable all-metal construction for precise continuous operation. - Large, enclosed build volume for demanding materials. - Dual extruder for multi-material and support structures. - Industrial-grade mechanics & control. - Smooth operation, low vibration. - Optimal for research & development, prototyping and small series production. - The first update package was installed during a service. Condition: - Used, very well maintained. - Fully functional and ready for immediate use. Spare parts + consumables as well as various filament types are included. See pictures. Service: - Loading with a forklift possible. - Transport via freight forwarder. - Offered price is net. - Invoice with VAT possible. We are selling because the machine no longer fits into our service portfolio.

Year of construction: 1986, condition: ready for operation (used), screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. • Machine Type: Plastic Recycling Extrusion Line • Screw Diameter: 105 mm • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) Crsdpjzht H Refx Ab Deg • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights • Material Feeding System: Screw Feeding from Silo • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets • Melt filter and underwater granulation system have already been dismantled Optional • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge • Extraction Blower • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total length: 3,400 mm, total width: 600 mm, total height: 1,400 mm, warranty duration: 18 months, overall weight: 500 kg, input voltage: 400 V, power: 3 kW (4.08 HP), compressed air connection: 8 bar, air pressure: 7 bar, Equipment: documentation/manual, Made in Ukraine, CЄ, new. 18 month full warranty. SAS200 – Automatic Casing-Free Forming & Cutting Module for meat, fish, and Pet-Food Snacks easy connects to your vacuum filler This professional system is designed for the industrial production of high-margin, casing-free snacks such as mini salami, meat sticks, jerky strips, fish snacks, and pet treats. The SAS200 can be connected to any standard rotary vacuum filler — including Handtmann, REX, Vemag, or our own gear-driven vacuum filler. Main Features: • Output capacity: up to 500 kg/h • Forming nozzles: cylindrical (Ø8–20 mm) and flat (25×5 mm to 200×5 mm) with auto cutting by length before drying • CE certified, industrial-grade • Stainless steel, hygienic design • Pneumatic guillotine with automatic water cleaning • Integrated decompressor for uniform extrusion • Operator control via 10.1” TFT touchscreen (Delta) • Incl set drying trolleys 30 rows with 60 trays 900 x 500mm (60 trays, 30 rows) Cedpfop S Nv Ijx Ab Dorg Compatibility: ✅ Works with most rotary fillers (Handtmann, REX, Vemag) ✅ Also available with our own gear-driven vacuum filler (200 L) Live demo available in: • 🇬🇧 Ashford, United Kingdom – Windsor Food Machinery • 🇵🇱 Kraków, Poland – REGIS Showroom

Condition: good (used), Year of construction: 2005, clamping force: 27,000 kN, Equipment: documentation/manual, KraussMaffei KM 2700 MX – SP 12000 / Screw Ø120 mm MC5 controll Clamping Unit * Clamping force: 27,000 kN / 2,700 t * Mold opening force: 1,890 kN * Moving platen force, opening/closing: 342 / 294 kN * Platen dimensions: 3,020 × 2,600 mm * Distance between tie bars (H × V): 2,100 × 1,700 mm * Opening stroke: 3,000 mm * Mold height min./max.: 900 / 2,000 mm * Maximum daylight: 3,900 mm * Ejector stroke: 400 mm * Ejector force forward/backward: 400 / 200 kN Injection Unit – SP 12000 Screw diameter: 120 mm * L/D ratio: 23 * Maximum injection pressure: 1,758 bar * Stroke volume: 6,786 cm³ * Shot weight PS: 6,175 g * Injection flow rate: 1,118 cm³/s * Screw speed nominal/max.: 100 / 141 rpm * Plasticizing rate PS at nominal speed: 169 g/s * Plasticizing rate PE at nominal speed: 131 g/s * Plasticizing rate PS at maximum speed: 239 g/s * Plasticizing rate PE at maximum speed: 184 g/s * Nozzle contact force: 166 kN Crodpfx Asznwt Ieb Djg Electro-Hydraulic Equipment * Pump motor rated power: 132 kW * Installed heating capacity: 84 kW * Barrel heating/control zones: 7 * Dry cycle rate according to Euromap 6: 356 cycles/h * Dry cycle time according to Euromap 6: 10.1 s * Oil tank capacity: 2,440 l Dimensions & Weight * Net weight incl. control cabinet: 168 t * Dimensions (L × W × H): 14.73 × 5.03 × 3.74 m * Maximum mold weight: 72,000 kg With Electric Screw Drive * Screw drive power: 147 kW * Screw speed nominal/max.: 100 / 158 rpm * Plasticizing rate PS nominal: 178 g/s * Plasticizing rate PE nominal: 137 g/s * Plasticizing rate PS maximum: 267 g/s * Plasticizing rate PE maximum: 206 g/s With Accumulator (ZE) Injection flow rate: 1,696 cm³/s Equipment: 4 cores hydraulic - moving platen 16 hydraulic cascades 6 pneumatic cascades Hotrunnrer controllers: 48 removable tie bar Software for Extrusion

Condition: like new (used), Extruder hose sections for Weber DS 10.22. Crsdehlvm Nepfx Ab Djg

Year of construction: 2004, condition: good (used), ProTec 2 caterpillar haul-off for profiles and tubes Year of construction 2004 Credpfx Abjic Aays Dog Synchronous drive In good condition, ready to work

Condition: excellent (used), DREHER MILL S26 / 41 VS with cyclone and fan Power: 11 KW Rotor diameter: 260 mm Rotor width: 410 mm 4 rotor knives, 2 rows of stator knives Inlet cross section approx. 260 x 410 mm Brqvu3zxfl Cutting mill with integrated noise protection. Crjdpfx Aogphqcsb Djg For plastic processing pipes, profiles, injection molding

Year of construction: 1991, condition: excellent (used), PP-PIPE BELLINGMACHINE LÜERS 2 SOCKETS PER CYCLE With ring insert device Type: MU125-2-6-91 Built in 1991 Application: PP HT pipes Two sockets per cycle Tool: 1 set for 2x125 mm HT pipe The Bellingmachine was overhauled in 2014 and modified Crjdpfxeffp Uio Ab Djg Condition: very good The machine is my property. Hablamos español Nous parlons français We speak English

Year of construction: 2000, condition: ready for operation (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 60X33 Application: PE PIPES or PP PIPES Typ: 60 X 33 Crsdpfx Asifgwhsb Dog Screw diameter:60 Drive: 75 KW Output capacity PE: approx. 200 - 250 kg/h Condition: Good, ready to use The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Year of construction: 2000, condition: excellent (used), HAUL-OFF GRAEWE R 125/4 Year of construction 2000 With remote control Drivet chains with synchronous drive Drivet chains good Crjdpfx Astxvutob Dog Condition ready for use, in very good working order Machine is my property

Year of construction: 1999, condition: ready for operation (used), AMUT EA90/24 SINGLE SCREW EXTRUDER Type: RALDI Screw for PVC oil cooled Application: PVC, PE or PP Working hours 48.000 DC Drive 36,3 KW Year of construction: 1999 11 digital heating controllers Melt pressure and melt temperature display SIEMENS SIMATIC DISPLAY Operating hours: 48,119 h Trigger control via the extruder possible Condition: Good operational The extruder is my property Sachal extrusion machines D-26345 Bockhorn-Grabstede Codpfx Abek Nn Dze Dsrg Bahnhofstrasse 6 Germany

Year of construction: 2004, condition: excellent (used), KUAG CUT 110 PIPE SAW for PP, PE or PVC PIPES With central pipe fixation Cutting speed 20 m/min. Cutting length min. 20 cm Crjdpfxsffp S He Ab Deg Cutting and chamfering Cutting with a cutting roller/pizza knife or a chisel and grip steel Year of construction: 2004 Condition: very good Hablamos espanol Nous parlons français We speak English Hablamos español Nous parlons français We speak English

Year of construction: 2007, condition: ready for operation (used), KAESER BB 88 C TURNING PISTON BLOWER, PVC POWDER FEEDER Unit: BB 88 C. Crjdpfxeqafbze Ab Deg Year of construction: 2007 Pumping speed: 5.07 m³ / min. Final pressure (abs): 1.01 bar Maximum pressure difference: 500 / mbar Rated motor power: 7.5 KW Block speed: 4,270 rpm Condition: very good Hablamos español Nous parlons français We speak English

Year of construction: 2010, condition: like new (used), BATTENFELD PE PIPE HEAD RK 315, spiral die, screen changer with tool 315 PE Lightly used, in excellent condition. Condition: As new. The pipe head is my property. Sachal Extrusion Machines Bahnhofstr. 6 Cedpfx Ashy Aq Isb Djrg D-26345 Bockhorn-Grabstede