Used Fecken Kirfel Aachen Germany for sale (8,616)

Condition: used, Year of construction: 1990, Type/Designation: 307-153/714-750 Serial Number: 82/293 Country of Manufacture: Made in West Germany (before 1990) Technical Data (approximate, for this type of CHIRON machine from the 1970s/80s): Machine Type: Column drill / single-station drilling machine for metal Motor Power: typically from 1.5 kW to 3 kW (three-phase, 380 V) Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched) Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on the version) Spindle Taper: usually MT2 or MT3 Feed: manual or mechanical (some models equipped with automatic feed) Weight: several hundred kilograms (approx. 300–600 kg) Intended Use: serial production in industry (precise hole drilling, light milling operations in metals, use in production lines) Machine Table: cast iron, capable of securing workpieces Full control panel – variable speed adjustment available 2. Key Working Head Parameters (important for riveting): Press Force (kN) – if specified on the cylinder label or in the electrical box (often 10–30 kN for this size) Spindle/Slide Stroke (mm) – measure from top to bottom position Daylight (working clearance: distance between tool tip and table at top position) Throat Depth – from spindle axis to column (working reach) Max. Rivet Diameter / Work Range – specify based on tests or prior use Voltage: usually 380/400 V, 50 Hz Dksdpfx Ajw T U Ubeaxoi 3. Dimensions and Logistics: L×W×H (of base/overall, in cm) Electrical Supply: 3×400 V, protection e.g. C16–C20 (indicate according to power rating) Weight (weigh with pallet jack with scale or estimate)

Condition: used, Little used 11.6 MW Condensing Steam Turbine Generator, TGM Kanis Turbinen GmbH, 2017 Reported to have less than 100 operating hours due to project cancellation. Includes turbine, synchronous generator, auxiliaries, and controls. Turbine Manufacturer: TGM Kanis Turbinen (Germany) Type: CT32-54 Condensing Steam Turbine Year: 2017 Live Steam Conditions: 43 bar @ 398 °C Exhaust Conditions: 0.064 bar @ 38 °C Power Output: Max continuous 11,615 kW Speed: 7,200 rpm Generator Manufacturer: Elin Motoren Type: HTM290E04, synchronous generator Rating: 14,631 kVA Voltage: 11,000 V Current: 768 A Frequency: 50 Hz Enclosure: IP54 Weight: 30,600 kg Year: 2017 Auxiliaries Voith Turbo I/P Converter Type: DSG-B07143 Supply voltage: +24 VDC Input pressure: 8 bar Dksdpfxoyhc Tuj Aaxei Output pressure: 2–5 bar Sirocco Cooling System Type: 2x16 KDL-E-50-2-1850-2-1.8 Motor power: 253 kW Air flow: 29,664 m³/h (65/35 °C, 2x0.065 kPa) Water flow: 2×25 m³/h (25/29 °C, 10 kPa) Pressure: 10–15 bar Controls Turbine control system included. Turbine was intended to be fed by boiler (not included in sale) with steam production capacity of 52570 kg/hour.

Condition: good (used), Year of construction: 2015, operating hours: 7,570 h, load capacity: 1,400 kg, lifting height: 5,316 mm, fuel type: electric, mast type: triplex, construction height: 2,253 mm, empty load weight: 1,600 kg, mileage: 7,570 km, Electric triplex stacker Brand: Still (Germany) Year of manufacture: 2015 Hours: 7,570 h Capacity: 1,400 kg Lift height: 5,316 mm Overall height: 2,253 mm Options: FREELIFT, initial lift Battery: 2022 with charger Automatic filling system Dedpfx Aaeygxhroxeki Video to follow

Condition: good (used), Year of construction: 2018, operating hours: 3,951 h, load capacity: 1,400 kg, lifting height: 5,316 mm, fuel type: electric, mast type: triplex, construction height: 2,265 mm, empty load weight: 1,600 kg, mileage: 3,951 km, Electric triplex stacker Brand: Still (Germany) Year of manufacture: 2018 Operating hours: 3,951 h Capacity: 1,400 kg Lifting height: 5,316 mm Overall height: 2,265 mm Dkjdpeygxfdefx Aaxsi Options: FREELIFT and INITIAL LIFT Battery: 2022 with charger Automatic filling system Video to follow

Condition: refurbished (used), Year of construction: 1994, machine/vehicle number: 57228, A Robust industrial meat mincer / grinder Wolfking C250 Uni (1994 model, fully refurbished). Ideal for commercial butchery, food processing, raw pet food production, or small rendering/pre-processing. Key Specs & Features: • Powerful 50HP motor + Guomao ZDY high-torque helical gearbox Dodpfx Aaeuh Scisxeki • Stainless steel auger + double knife setup • Handles fresh meat, frozen blocks, offal and up to ~10 tons/hour capacity (knife set up / material dependent) • Schneider Altivar soft starter (fitted 2024) for smooth start, energy efficiency & protection • Custom 0.75m³ stainless hopper • 400V 3-phase Condition & History: • Purchased 2021; major refurb £9,500 (motor, gearbox, chassis + hopper; receipt included) • 2024 upgrade £1,500 (new soft starter, controls, emergency stop) • Only ~350 hours light use (fresh chicken carcass, lungs, liver, hearts) – never maxed out • Meticulous maintenance: 3-month gearbox oil changes, food-grade grease post-use Inclusions: • Spare sizing plates & knives • Screw cap tool • Stainless spout/hood guard • Full pre-sale check Dimensions (with hopper): Height 2.3m | Width 1.85m | Length 2.1m | Weight ~1250–1350kg Price: £15000 + VAT (if applicable) Delivery: Included anywhere in England; export to EU/Germany possible (quote on request) Serious buyers only – viewing in Halifax, England welcome (virtual or in-person). Photos, 4 min walk around video, or more details on request. Perfect upgrade for butchers, processors, or raw pet food makers needing reliable industrial meat grinder performance. Contact for questions or to view!

Condition: ready for operation (used), Year of construction: 2018, operating hours: 58 h, General Data Measurements width 4360 mm Measurements depth 1718 mm Measurements height 3910 mm Machine weight 7600 kg Djdpfjx D Nc Hex Aaxeki Injection Unit Screw diameter 35 mm Injection pressure 2500 bar Clamping Unit Clamping force 1000 kN This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€. Application Types Injection Moulding

Condition: good (used), Year of construction: 2013, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 60 mm, spindle speed (max.): 4,500 rpm, table length: 800 mm, table width: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table size: 800 x 450 mm Spindle taper: SK40 (ISO 40) Spindle speed: 4,500 rpm (max) Quill stroke: 60 mm Tool clamping: Hydraulic Controller: Heidenhain TNC 320 Dedpfx Aajypm Npoxski Country of origin: Germany Motor power: 5.5 kW Machine (L×W×H): approx. 2700 x 1900 x 2300 mm Machine weight: 2.025 kg

Condition: used, Year of construction: 2017, Overview The ALWID-SUPERIOR-16D/4SK filling machine was built in 2017 by the German manufacturer ALWID. The machine was used by a Company producing sauces in Germany. After bankruptcy, BEVMAQ took over the machine and stored it. The filler is a piston filler that can fill volumes of 0.1-1.0 l into containers made of plastic or glass. The volume to be filled can be easily adjusted. The cap is pressed on. An extension to a screw capper is possible. In addition to sauces, the machine can also be used for dressing, spirits or mayonnaise. The below-surface filling can also be used to fill products that tend to foam. Technical Details Capacity: 6,000 bottles per hour with 250ml bottle volume A test showed that mayonnaise can still be filled to 500ml at 6,000 bottles per hour Working Direction: Left - Right Number of filling stations: 16 Number of closing elements: 4 Siemens control Below surface filling Lowering and raising the filling pipe during the filling process Scope of delivery: Filler Capper Cap sorting unit Cap alimentation Dodpfx Aewwq Sfoaxski

Condition: good (used), Year of construction: 2019, operating hours: 10,774 h, load capacity: 5,000 kg, fuel type: electric, empty load weight: 1,300 kg, mileage: 10,774 km, Electric tow tractor brand STILL (Germany) Year of manufacture: 2021 Capacity: 5,000 kg; Battery from 2019 with external charger; Automatic filling system Dkjdpfx Aajypxn Rexsi

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 7-41 5157 40, The Pittler PCC vertical lathe, serial number 7-41 5157 40, was built in 1999 and corresponds to the PV SL 1/1-1 model. This CNC-controlled vertical lathe is designed for the precise machining of workpieces up to 300 mm in diameter. Technical specifications of the PCC Pittler Max. turning diameter: 300 mm Travel: X-axis 920 mm / Z-axis 250 mm C-axis: available Chuck diameter: 250 mm Spindle speed: 28–7000 rpm Spindle power: 23–29 kW Max. torque: 150–188 Nm Spindle bore: 60 mm Tool turret: 8 positions Control system: Siemens Sinumerik 840D Coolant and chip conveyor: integrated Machine weight: approx. 6.5 tons Connected load: 54 kVA at 400 V / 50 Hz Djdpfx Aowlaqyoaxski This machine is designed for automated operation and is particularly suitable for machining small to medium-sized workpieces with high precision. Availability and further information: Several machines of this type, built in 1999, are currently available, including those with the machine numbers 7-41 5157 35 and 7-41 5157 36. These are located in Germany and are in good used condition.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Manufacturer: HABERMEHL Anlagenbau GmbH Address: Hauptstr.1, 35510 Butzbach-Ebersgöns, Germany Type: EH 400/1 Serial number: 901 Year of manufacture: 2004 Voltage / Frequency: 400 V / 50 Hz Rated power: 3 kW CE-certified: Yes 🛠️ Device Description Industrial shredder or crusher (Shredder/Granulator). Notable features visible in the photos: - System with rotating knives (shredding unit) on a 2 mm shaft Dkjdpfx Aajw Niuhjxoi - 3 kW SEW motor and reduction gearbox - 8 mm screen (the screen is labeled “8 mm Sieb”) – determines the output particle size - Rollable, portable design - Material discharge container and lower motor drive system Machines of this type are typically used for shredding the following materials: - Plastics - Rubber - Wood - Light metal chips - Electronic scrap 📝 Technical information you should request If you require further details, you may request the following information from the supplier or manufacturer:

Condition: good (used), Year of construction: 2022, operating hours: 147 h, load capacity: 1,500 kg, fuel type: electric, empty load weight: 170 kg, mileage: 147 km, Just arrived Electric pallet truck Year of manufacture: 2022 Dedsyn Afqepfx Aaxoki Brand: Still (Germany) Very compact and lightweight (170 kg) Ideal for use in trucks Capacity: 1,500 kg ONLY 147 operating hours Integrated charger

Condition: good (used), Year of construction: 2022, operating hours: 239 h, load capacity: 1,500 kg, fuel type: electric, empty load weight: 170 kg, mileage: 239 km, Just arrived Electric pallet truck Year of manufacture: 2022 Brand: Still (Germany) Very compact and lightweight (170 kg) – ideal for truck use Capacity: 1,500 kg ONLY 239 hours Built-in charger Dsdpfxoyn Adts Aaxski

Condition: good (used), Year of construction: 2022, operating hours: 349 h, load capacity: 1,500 kg, fuel type: electric, empty load weight: 170 kg, mileage: 349 km, Just arrived Dkedeyn Ac Aepfx Aaxoi Electric pallet truck Year of manufacture: 2022 Brand: Still (Germany) Very compact and light (170 kg), ideal for use in a truck Capacity: 1,500 kg ONLY 349 operating hours Integrated charger

Condition: good (used), Drill, drill press, pillar drill, pillar drill -Table size: 275 x 215 mm -Spindle mount: MK3 -Projection: 280 mm -Speeds: 200-1450 rpm -Columns: Ø 120 mm Dkjdpfjkw H D Rsx Aaxji -Spindle stroke: 100 mm -Translation via: Gears -Number: 1x drilling machines available -Price per piece -Dimensions: 360/600/H1945 mm -Weight: 230kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Horizontal thin-cut band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany Dsdjym Sdajpfx Aaxeki 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm

Condition: new, Year of construction: 2026, 560 mm 320 mm 400 mm 950x450 mm 1050x320 mm 25-3600 U/min SK 40 Dkodoyrtyajpfx Aaxsi

Condition: good (used), Year of construction: 2014, operating hours: 11,578 h, load capacity: 8,000 kg, lifting height: 4,450 mm, fuel type: gas, mast type: duplex, construction height: 3,580 mm, empty load weight: 15,290 kg, mileage: 11,578 km, LPG forklift, brand Linde (Germany), year of manufacture 2014, capacity 8,000 kg, lifting height 4,450 mm, overall height 3,580 mm, sideshift, fork spreader, DUO PALLET system, four functions, watch the video on YouTube. Dkodpsynt Naofx Aaxei

Condition: used, Year of construction: 2013, Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  Formats: KeyKeg Application: KEG filling Operating pressure: 5.5 bar Electrical supply: 230/400 VAC Control voltage: 24 VDC Frequency: 50 Hz   Dkedpfxsyq Ia Ee Aaxoi

Condition: excellent (used), Year of construction: 2019, operating hours: 460 h, functionality: fully functional, machine/vehicle number: 283-307, input voltage: 400 V, compressed air connection: 8 bar, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), Fully automated 5 colours textile screen printing machine with 12 stations (Made in Germany), with 5 x Flash Cure Dryer from Chiossi e Cavazzuti Spot Easy, made in Italy. Drying Tunnel, made in UK. Original Equipment Cost €59,750. Excellent programmes allowing multiple options. Example you require a double hit print, programme alloes print 1st colour at first station, move to drying station then send back to first station for second hit of first colour image. and so on. Machine only used 20% of time, so in really good condition. Support available from Manufacturer Heinz Walz. 1. Full set of Aluminium Pallets for bags supplied with machine. 2. Pallets for Clothing available from Heinz Walz 3. With electrically driven squeegees, with fine adjustment. Print size 480 x 500 mm 4. With electrically driven rotation and pneumatically driven lifting system. 5. Digital microprocessor PLC controller with Membrane key pad and 5,7” display control panel in different languages. Standard equipment * Digital microprocessor PLC controller * Membrane key pad and 5,7” display control panel in different languages * Printing in automatic modus or through a foot pedal, one impulse, one print. Dksdpfoyk Du Sex Aaxei * Pneumatic screen clamping system * Control membrane keypad on each printing station * Dual air cylinders squeegee system * Frontal screen loading * Indexing table servo driven * Lift system pneumatically driven * Squeegee electrically driven * Squeegee pressure individually adjustable * Four different printing programs + one flock program. * ½ index and double index * Clock wise or anti clock wise rotation * Off contact of the screens individually adjustable * Registration: ± 0,025 mm

Condition: used, mileage: 39,000 km, power: 121 kW (164.51 HP), first registration: 06/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales consultant. Attention!!! Sale preferably to commercial customers Internal ID Number: [3183] ----Optional bookable: * 12–64 months warranty (valid EU-wide) * New inspection * New TÜV & emissions inspection * Nationwide delivery * Financing possible even with no down payment * Tow bar can be retrofitted on request * Spring offer: Upon request and for an additional charge of only €999, increase the towing capacity up to 3,500 kg (depending on vehicle and manufacturer). ----Vehicle Highlights: * 19% VAT deductible * Regularly serviced * German vehicle * 1 previous owner Djdpfjyra R Ssx Aaxski * Immediately ready for use * Euro 6 emission standard * Maxi panel van, high roof & extended length * Cruise control * Air conditioning * Bluetooth multimedia function * Rearview camera Special equipment: Passenger side airbag, City Package, Driver Assistance System: Emergency Braking Assistant, Reinforced rear suspension, Rear doors (opening angle 270°), Wooden floor in cargo area with wheel arch and high side/door trim, Automatic climate control, Comfort Package, Navigation system with color display, Spare wheel in driving configuration, USB port Further equipment: Driver airbag, exterior mirrors with wide-angle function, integrated indicator lights in exterior mirrors, body color, brake assist, Body/Framework: Standard large-capacity van, padded headrests, fuel tank: 90 liters, cargo compartment partition, height-adjustable steering column (steering wheel), engine 2.2 L - 121 kW Blue-HDI FAP CAT, wheelbase 4035 mm, low emissions per Euro 6d standard, sliding door loading/passenger area right, SCR system (AdBlue technology), side protection strips, seat covers/upholstery: fabric, seats in driver's cab: dual passenger seat, seats in driver's cab: driver's seat with lumbar support, start/stop system, socket in loading/passenger area, permitted total weight 3.5 t ----Leasing or financing required? We offer attractive options – also possible without down payment! Contact us for details. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Please note: All information provided online is non-binding and for general vehicle description only. Errors, typographical mistakes, and prior sale are reserved. The definitive condition of the vehicle is determined solely by the purchase contract on site or by written agreements. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: excellent (used), Year of construction: 1994, Tube bending machine INECO QB-76 Max. tube diameter 76 mm x 3.6 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Dsdpoyrgyysfx Aaxski

Condition: good (used), Welding output: 30 - 300 A Siegfried Volz Werkzeugmaschinen Djdpfeyrgnkjx Aaxeki Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Welding current: 10 - 200 A Weight: 103 kg Siegfried Volz Machine Tools Dkedpfsyrglcex Aaxei Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2023, operating hours: 439 h, lifting height: 4,620 mm, fuel type: electric, mast type: triplex, power: 10 kW (13.60 HP), total height: 2,100 mm, total length: 1,950 mm, total width: 1,150 mm, color: other, Year of manufacture: 2023 Empty weight: 3.360 kg Lifting capacity: 1.600 kg CE mark: yes Technical condition: very good Visual appearance: very good General Country of production: Germany Condition CE type: CE Built-in battery charger Dkedoyr Nbmspfx Aaxoi