Used Feed for sale (11,840)

Condition: used, 4-roller feed Itsdpozt S D Eofx An Njk Storage location:

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026 and will continue to operate until August 5, 2026. The machine has the following configuration: Edge milling unit 1802 Motor power: 2 x 2.0 kW 1st milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for edge milling unit 2nd milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for edge milling unit Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Reservoir for 14 cartridges (1.4 kg) GluJet collection container Printing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function milling unit 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile milling unit 1833 MOT4 1st milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2nd milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Scraping blade unit 1929 MOT4 Tungsten carbide reversible inserts for scraping blade holder R = 2 mm (2 pieces required) Itjdpszrf Nrsfx An Nsk Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide rail length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - tactile probe vertical, top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: used, Model: SH75 Serial No: 7076 Capacities: Rotary Table Size: 1000 x 1000mm Maximum Table Load: 2000kg Isdpfszrm T Esx An Notk Vertical Traverse: 1000mm Cross Traverse: 1245mm Longitudinal Traverse: 1000mm Spindle Diameter: 75mm Spindle Traverse: 508mm Spindle Speeds: 5.6- 1120 rpm Spindle Taper: 40 int Facing Head Diameter: 508mm Facing Slide Traverse: 180mm Facing Head Speeds: 5.6 – 280rpm Feeds, X, Y & Z: 0.75 – 2500mm/min Feeds, Spindle & Face: 0.25 – 830mm Screw Cutting to Table: 2 – 10mm Pitch, 4 – 16 TPI Motor: 7.5kw Electrics: 415v, 3ph, 50 Cycles Complete with: Screw Cutting, 3 Axis DRO, Steel Telescopic Guards, Operator Safety Guard, Pendent Control, Power Draw Bar, Safety Brake, Facing Head Lock, Spindle Support Bearing, Facing Slide Tool Holder Selection of Spindle Tool Holders, Lovo Light Approximate Dimensions: 4200 x 2940 x 2950mm Approximate Weight: 10,500kg

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse. Ijdpfjzut Axjx An Netk

Condition: good (used), Year of construction: 2013, functionality: fully functional, power: 26 kW (35.35 HP), overall weight: 900 kg, fuel type: diesel, color: red, axle configuration: 1 axle, empty load weight: 900 kg, fuel: diesel, Equipment: trailer coupling, === KEY SPECIFICATIONS === Year: 2013 Machine type: Mobile wood chipper Maximum wood diameter: 160 mm Feed opening: 160 x 221 mm Chipping principle: Disc system Feed rollers: 2 horizontal feed rollers Chip length: 4–10 mm Capacity: Up to 8 m³/h Engine: Lombardini diesel Engine power: 26 kW / 35 hp Operating weight: 900 kg Dimensions: 3573 x 1416 x 2440 mm CE certification: Yes === EQUIPMENT & FEATURES === TP PILOT No-Stress system TP STARTER automatic coupling system Hydraulic feed roller speed control Two cutting blades Horizontal and vertical counter knives Single-axle mobile trailer Overrun braking system Galvanized stabilizer leg Adjustable discharge chute === CONDITION === Used condition with visible signs of professional use. The machine shows scratches, paint wear and surface corrosion, as shown in the photographs. Inspection and operational testing are possible by appointment. === DESCRIPTION === 2013 TP TP 160 Mobile diesel wood chipper designed for processing branches and green waste up to 160 mm in diameter. Equipped with two horizontal hydraulic feed rollers, a disc chipping system, TP PILOT No-Stress control and an adjustable chip length from 4 to 10 mm. The single-axle mobile trailer configuration makes the machine suitable for forestry, landscaping, groundcare and vegetation management applications. === PRICE, LOCATION & DELIVERY === Itedpfx Anozrfixs Njk Price: €12,500 Location: Sittard, the Netherlands Delivery terms: EXW Worldwide transport can be arranged by Collé Rental & Sales.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Condition: Functionally tested Equipment: Base machine Extendable boom Joint milling unit 1801 Edge feed system, fully automatic 1903 Glujet 201 adhesive application system, cartridge Printing unit 1912-3, pneumatic Cutting unit 1918 Combination milling unit FR201 Pulling blade unit 1929 Itsdpfx Aozu T Sgsn Njk Chip collection box Surface pulling blade 1964 Location: Flörsheim Availability: Short-term

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,500 h, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp Iedpfsq Nmm Tsx An Netk  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: used, functionality: fully functional, Year of construction: 1996, Used scrap conveyor -Extraction belt Ijdpozq S Avofx An Netk -Conveyor belt

Condition: used, functionality: fully functional, Year of construction: 2003, Material feed hopper Isdpfx Anjzq S Hzs Nstk -Top -Grating -Discharge/transfer conveyor -Conveyor belt

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Iodpfx Anezuxqhj Njtk Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without sacrificing pressing power.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Ijdezp H R Eepfx An Notk Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: excellent (used), Webster & Bennett 72” CNC Elevating Rail Vertical Turning & Boring Machine Fanuc control Iodpfxjzrpmus An Netk Tool changer Table Size 72” Machine swing 84” Table speed Range 3.8 to 150 rpm. Feed range .156mm to 7.5mm per rev. Max Height under cross slide 48” Max Height under turret 48” Ram Travel 38” Main motor 50hp Fully interlocked guards with swarf conveyor

Condition: used, Year of construction: 2011, Working width DIN (m) 13 / Transport width (m) 2.4 / No. of rotors 12 / No. of tine arms per rotor 6 / Trailed attachment / Tyres Super-Balloon 16 x 6.50 - 8 / Drive DIGIDRIVE® finger claw clutch / / Weight approx. (kg) 2550 / Edge spreading pr Itsdpsqrrrgefx An Nok

Condition: used, Year of construction: 2019, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm Itedpozvhkmsfx An Nsk capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIE) - With miter cuts from 45° right to 60° left * Mitre adjustment via a large turntable - MEP EVO microprocessor control for managing all functions * Front right, swiveling - Optional manual or automatic lowering of the saw frame * Stepless adjustment of the saw frame lowering - Saw blade guide made of carbide plates - Hydraulic saw blade tensioningâ??includes digital display - 2 saw blade speeds - Coolant system - 1 angle stop - Chip removal brush - Machine base frame with forklift pockets - Operating instructions in German - Replacement saw bands Semi-automatic operation: - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw frame - Electro-hydraulic lifting of the saw frame - Electro-hydraulic opening of the vise *Optional equipment: - 2000 mm feed roller conveyor - 2000 mm discharge roller conveyor, including stop

Year of construction: 2022, condition: used, Empty weight: 135 kg Serial number: 280517 Isdpfxjzvb Irj An Nstk Power supply: 400 V three-phase, 60 Hz (without neutral) Rated electrical power: 60 kW (max ~60.7 kW) Rated current: ~88.5 A Operating steam pressure: 7 bar Maximum allowable pressure: 8.5 bar Allowable steam temperature: up to 200 °C Listed weight: 135 kg Mounted on a metal frame with an overhead feed tank Punch-button emergency stop and control panel with indicator lights Connections with visible stainless steel braided hoses Additional marking on the enclosure: "CVE-80-2" Estimated footprint of the entire unit on the frame: ~120 × 90 × 200 cm (W × D × H) Visual condition: traces of surface corrosion on the bottom of the frame and a few scratches; appears to be in good overall condition Description generated using AI Online auction held following the closure of the Umiami research and development center in Villebon-sur-Yvette (91), which was dedicated to the development of plant-based food products under the "Swap Food" brand. This auction includes over 100 lots, notably featuring state-of-the-art laboratory and process development equipment: “Anton Paar” particle size analyzers and rheometers, a “Stable Micro Systems” texturometer, “Dohmeyer” cryogenic cabinets, “Hounö” and “Unox” ovens, a “Mettler Toledo” metal detector, an “Anritsu” checkweigher, "Sartorius" thermobalances, as well as numerous food preparation appliances, laboratory equipment, stainless steel furniture, shelving, computer equipment, and technical equipment. Auction organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Wednesday 23 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 21 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, CNC Machining Centre – Horizontal | Brand: HÜLLER HILLE | Type: nbh 170R Year of manufacture: 2005 The machine can be inspected under power by prior appointment. Itodpfxjzviaio An Nsk Condition: In working order / ready for operation. TECHNICAL SPECIFICATIONS: Working area - X/Y/Z axes: 1.000/800/800 mm - Workpiece swivel range within the working area: Ø 900 mm - Distance from table centre to spindle nose in Z: 138.9 (HSK-A 100) mm Position measurement system - Encoder scales: direct (measurement method) - Position uncertainty A according to DIN ISO 230-2: 0.007 mm 180-degree pallet changer with 4 x 90-degree pallet rotators Pallet - Pallet clamping surface to DIN 55201, Form A2: 500 x 630 mm - Transport load per pallet: approx. 0,8 tons - Height of the system: 1.100 mm NC rotary table (B-axis) - Smallest incremental step: 0,001 degrees - Repeatability: ± 0,001 degrees - Accuracy across all positions: ± 0,002 degrees - Permissible torques on the clamped table: * Tangential torque: max. 7.000 Nm * Tilting moment: max. 16.000 Nm - Clamping forces: * on the table: 147.000 Nm * on the pallet: 84.600 Nm Working spindle / gear head - Tool holder to ISO 12164 (DIN 69893): HSK-A 100 - Diameter at front bearing: 100 mm - Drive power 100% duty cycle/60% duty cycle: 37/46 kW - Speed range: 25 – 10.000 rpm Feed / Feed force / Rapid traverse: - Feed range X/Y/Z axes: 1 – 60.000 mm/min - Feed force on X/Y/Z axes, 25% duty cycle: approx. 15.000 N - Rapid traverse speed, X/Y/Z axes: 60 m/min - Rapid traverse, rotary table: 30 rpm - Acceleration: approx. 6 m/s² - Ball screw (pitch): Ø 50 (30) mm Tool magazine for 4 magazine cassettes, including two additional magazine cassettes. Electrical - Rated power: 74 kVA Compressed air Coolant system, make: KNOLL The internal coolant supply can be switched to compressed air. - Coolant pump 20–70 bar - Coolant tank, 2.500 l Machine layout - Space requirements, L x W x H: approx. 8 x 3.5 x 3.5 m - Weight: approx. 24 tons ACCESSORIES / EQUIPMENT: - Control system: Siemens SINUMERIK 840D ADDITIONAL EQUIPMENT FOR AUTOMATED MANUFACTURING PALLET STORAGE SYSTEM Technical data sheet with full details, including information on the wide range of features, available on request. No guarantee is given as to the completeness or accuracy of the technical specifications and specifications. – Subject to prior sale –

Condition: used, machine/vehicle number: 007668, Max. panel width: 1200 mm Ijdpfx Asu Huwcsn Njtk Max. panel length: 2400 mm Movement system: suction cups.

Year of construction: 2023, operating hours: 1,500 h, condition: excellent (used), functionality: fully functional, Abstracts Itodpeztc Nfefx An Nek This is a high-quality system that mixes and homogenizes up to 3 additives in a hot mixer. The control system is included in the scope of supply. First, the material is transported from the production area to a storage silo. From this first silo, the material is fed into the hot mixer, then into the cooler, and finally into a second silo for intermediate storage. After that, there is the option to directly fill the powder onto a big bag filling scale or to compress it into pellets using a pellet press and then fill them. The steel structure is included in the scope of supply. Where necessary, the system is designed according to ATEX standards. In the Documents section, you will find a detailed English and German description of the complete scope of this system. Do not hesitate to call us to discuss and demonstrate the system. A similar system can be inspected in Europe. Main machines: • Mixaco hot mixer HM3000 - 400 kW • Mixaco cooling mixer KM9000 - 90 kW • Steel structure • AZO feeding station and gravimetric dosing for 2 solids and 1 liquid • AZO 2 special dosing scales for difficult-to-flow powders or solids • AZO 4 transport line, pressure and vacuum conveying • AZO 2 metrologically verifiable big bag filling stations • AZO control system • Kreyenborg silos ATEX 15 m³ • Kahl pelletizer 37-850 – 132 kW with box cooler and accessories The system was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered at a port or in the production facility in Europe, EXW. The details for optimal transport need to be clarified. The machine price does not include packaging.

Condition: ready for operation (used), Weiler Commodor B including a new 3-axis digital display from an educational institution -GS designation -Three-axis digital display, "NEW" -Center height 180mm -Distance between centers 1000mm -Spindle bore 56mm -Spindle speeds 15 - 2000 rpm -Automatic longitudinal / crossfeed -Threading / Metric / Inch / Module / Diametral Pitch -Electric chuck guard -2x Emergency stop -Multifix with inserts -Four-jaw chuck - Röhm -Chip guard -Coolant system -Very well-maintained original condition -Documentation Isdpfszq Dkljx An Notk Dimensions: L x W x H 2.3 x 1.2 x 1.7 meters / Weight 1600 kg Errors and omissions excepted.

Year of construction: 1979, condition: ready for operation (used), A compound feed line is available. 1) Bühler hammer mill. 2) Bühler DPAB pellet press, year of manufacture: 1979. 3) Loos rapid steam generator, year of manufacture: 2000, capacity: 300kg/h, max. operating overpressure: 13bar. 4) Gebrüder Jensen weighing and mixing unit, year of manufacture: 1979. Production capacity range: approx. 5-10t/h. Including the associated drag conveyors and bucket elevators. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Ijdpfoy Aad Iox An Notk

Condition: like new (used), functionality: fully functional, machine/vehicle number: see pictures, overall weight: 260 kg, fuel type: gasoline, JCB wood chipper model CH150120PE with JCB-E460PE petrol engine (457 cc) and chipping capacity 120 mm. Specifications: Brand: JCB Model: CH150120PE Engine: JCB-E460PE, 4-stroke OHV, 1 cylinder Engine displacement: 457 cc Power: 15 hp Starting method: electric and pull start Drive: belt Chipping capacity: 120 mm Feed hopper: 588 × 440 mm Feed opening: 278 × 167 mm Itedpfxozvf Rwo An Njk Disc diameter: 600 mm Blades: 2 cutting blades + 6 chipping blades Disc speed: 1800 rpm Fuel tank capacity: 6.5 litres Documentation: Manuals: JCB-CH150120PE and JCB-E460PE (EN)

Condition: used, Year of construction: 2015, First registration: / 01.01.2015 / _____ / machine type: SM-P-1-10ZK / incl. straw blower / hopper volume: 1000m³ / feed discharge on both sides / hydraulic support leg / mixing system: vertical mixer / scales defective! / Iedpfx Aneqrryrs Njtk

Condition: used, Year of construction: 1973, Indexing milling cutter with 3-roller feed spindle, 30 mm diameter. Ijdpszd Tg Asfx An Nstk Location: Nattheim.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Factory new – never installed! Weinig Hydromat 4300, high speed planer and moulder Feed speed 30-300 m/min Spindle 1 (Bottom) – Radial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 2 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 3 (Right): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 4 (Left): Itsdpfxszu Awrs An Njk – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 5 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer + profile jointer fully automatic Spindle 6 (Bottom): – Table tops with wood inserts, maximum cutting height of 65 mm with a flange of 100 mm – Rotaplan pressure plate above the bottom shaft – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic – Hydro bearing with automatic locking General: – Horizontal CNC-controlled pressure rollers – CNC-controlled positioning input – Marathon Powercoating Plus – Automatic waxilit pump – Weinig WMC with touchscreen – Kickback protection for sawing operations – Machine with spindle and feed brakes – Safety and sound insulation housing

Condition: used, Year of construction: 2024, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pivoting range: 45 °, actuation type: manual, rotational speed (min.): 2,800 rpm, table width: 500 mm, table length: 700 mm, total length: 1,200 mm, total width: 900 mm, total height: 1,600 mm, overall weight: 95 kg, Equipment: documentation/manual, • The mortise milling cutter, type QNF, is used for horizontal and vertical mortising in wood, aluminum, and PVC. Itodpfxszvfw Rs An Njk • The drive unit with the milling head runs in a guide arm, which is supported by four ball bearings. • Machine stand included. • Robust gray cast iron construction. • Hydraulic feed brake. • Pneumatic horizontal material clamping, on both sides of the milling area. • Lower milling cutter guard can be connected to an extraction system. • Carbide-tipped mortise milling cutter, 250 x 60 x 40 mm, Z=4+4.