Used Feed for sale (11,123)

Condition: used, used, in top condition Manufacturer: Holzher Type: 1112 Machine no.: 49474-FD24 Motor with pole changing, 2 speeds, 0.75 kW Roller diameter: 110 mm Bwedpfx Ajy Dh Rrsl Ijl Roller width: 50 mm Feed rollers: 4 pcs with stand Speeds: 8 steps, 2-30 m/min Required space approx. 1300 x 500 x 800 mm Stock location: 97447 Gerolzhofen, loaded free on truck, unpacked Handed over as is, as inspected, function tested, without overhaul, without warranty or guarantee

Condition: used, used, in top condition Cleaned, functionality tested, test run, partially refurbished. Manufacturer: Samco Type: Euro-Uno Roller diameter 120 mm Roller width 50 mm Feed rollers: 4 units All 4 rollers replaced Continuously adjustable Space requirement approx. 1000 mm x 800 mm x 800 mm Total connected load 0.6 kW Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition as inspected, without warranty or guarantee Bjdpev D Rhbofx Al Iswl

Condition: good (used), Year of construction: 1998, Chipper with horizontal feed and conveyor belt in standby mode. Slow-running and therefore very quiet. Max width: 300 mm. Max height: approx. 30 mm. Motor: 18.5 kW, 115 rpm. Ideal for use next to a panel saw for long strips. Bwsdpfx Ajgmn Amel Iel

Condition: good (used), Year of construction: 2015, Chipper with horizontal feed , but vibrating chute is not included Bwedpfsk Twl Tsx Al Iol working width 350 mm Motor rotor 30 kw

Year of construction: 1979, condition: ready for operation (used), A compound feed line is available. 1) Bühler hammer mill. 2) Bühler DPAB pellet press, year of manufacture: 1979. 3) Loos rapid steam generator, year of manufacture: 2000, capacity: 300kg/h, max. operating overpressure: 13bar. 4) Gebrüder Jensen weighing and mixing unit, year of manufacture: 1979. Production capacity range: approx. 5-10t/h. Including the associated drag conveyors and bucket elevators. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Bwodpfxjy Aad Io Al Isl

Condition: used, material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm Bsdpfjvuuntsx Al Ijwl Weight 0,40 t required space 0,9 x 0,8 x 0,7 m SPECIAL DEAL as is where is, WITHOUT putting into operation, in given condition mechanical roll feed drive via main shaft / pivot shaft of the press - pivot shaft / mounting plate not included max. no. of strokes approx. 1500 / min

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Bwodpfx Alox U Eiaj Ijl Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Feeder/Uncoiler/Straightener LARA DEMAE-10000/100/1400-D – Year 2018 Bwodpfx Aloy Edfzj Ijl Inspected and ready for production. Complete coil feeding system integrating uncoiling, straightening, and servo-driven feeding in a single compact unit. Engineered for continuous operation in cut-to-length, stamping, or deep-drawing lines, offering high precision and reliability. Robust equipment, ideal for processing carbon steel, stainless steel, and aluminum. Main Components • Powered hydraulic decoiler  Capable of handling heavy coils  Motorized coil loading car for rapid coil changeovers  Loop control via laser sensor  Protected loading area with safety barriers, ensuring excellent process visibility • Combined straightener-feeder  Head equipped with 11 straightening and feed rollers  AC servomotor with PLC control + touch HMI  Automatic threading and de-clamping functions to facilitate strip insertion • Integrated electrical and hydraulic systems  Independent electrical cabinet  Precise advancement control and synchronization with downstream equipment Key Technical Data  Maximum strip width: 1,400 mm  Sheet thickness: up to 3 mm (carbon steel / aluminum) up to 1.5 mm (stainless steel)  Power supply: 400 V / 50 Hz  Hydraulic pressure: up to 130 bar

Condition: excellent (used), Hydraulic feed unit 2DA1F with 2.2 kW motor, 1430 rpm, with planetary reduction gearbox for speed reduction, electric adjustment via worm gear motor, Bedpfolxzhtjx Al Iewl Hydraulic feed unit 2D35ZK with 4 kW motor, with bevel gearbox, control lever with 2 sensors, e.g. for SCHULTE HB 12 band saw

Condition: used, Year of construction: 2020, saw blade diameter: 600 mm, cutting height (max.): 200 mm, total length: 8,000 mm, total width: 2,000 mm, Push-feed crosscut saw, equipped with a 4-meter pusher, cutting height: 30 to 200 mm, cutting width: 300 to 580 mm, pusher capacity: 350 kg. Bodpeyzrb Aofx Al Iswl

Year of construction: 1998, condition: not inspected (used), functionality: unexamined, workpiece length (max.): 4,200 mm, workpiece width (max.): 2,200 mm, stack height: 1,000 mm, TECHNICAL DETAILS Max. panel length: 4,200 mm Max. panel width: 2,200 mm Max. stack height from floor: 1,000 mm Lifting capacity: 200 kg Number of vacuum suction cups: 32 MACHINE DETAILS Number of pick-up stations: 2 EQUIPMENT Pick-up station for panel stacks Vacuum system Feeding of panel stacks Feeding of panel stacks via motorized roller conveyor Frame system Vacuum pump The machine is sold and delivered in its actual and legal condition ('as seen and approved') based on photographic documentation and technical/commercial data sheets of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. Bwedoyzy Rxopfx Al Isl External reference: 5934

Year of construction: 2000, condition: used, machine/vehicle number: 000101-6, stainless vibratory feed conveyors, adjustable vibration for product control, on stainless frame. 1Ph. Bwodsdg H Ipopfx Al Iol

Condition: used, used, in good condition with new feed rollers Brand: Holzher Type: ET2 Machine no.: 29091 Motor pole-switchable, 2 speeds Roller diameter: 110 mm Roller width: 50 mm Feed rollers: 3 pcs Bedpfx Aeyztzkol Iewl with stand Speeds: 8 pcs, 2 – 30 m/min, 4-way switchable Space requirement approx. 1300 x 500 x 800 mm Total connected load 0.7 kW Storage location: 97447 Gerolzhofen, loaded free, unpacked Transfer in as-is condition, as inspected, function-tested, without refurbishment, without guarantee or warranty

Condition: excellent (used), ///// PRICE LISTED PER 1 PIECE ///// Manufacturer: ALGRA Type / markings: D3A030012/0 21-451-003 D3A030011/6-3 23-1151-012 I am offering ALGRA drive gearboxes used in metalworking machines. These components serve the function of power transmission and feed rate adjustment, most commonly used in: - conventional milling machines - machining centers - industrial machines as drive modules Robust, heavy-duty construction – typical components for continuous industrial operation. ⚙️ Technical condition Bwodpfx Aloyz A U Ho Ijl Condition: used Show normal signs of use Mechanically complete Knobs and mechanisms operate correctly Possible storage marks 📦 Included ALGRA gearbox (exactly as shown in the photos) 📏 Application - feed drive for X/Y/Z axes - machine tool gear systems - spare parts for milling machines and industrial equipment - maintenance / machine servicing ℹ️ Additional information Markings stamped on the housings (visible in the photos) Inspection plates "QS-IN PRÜFUNG" Oil-filled design (sealed gearbox) Possibility to sell individually 🚚 Shipping Shipping via courier or on pallet Personal collection possible

Condition: good (used), Centering feed with toothed chain and 2 pressure rollers from above. Hydraulic / Pneumatic. Pressure rollers driven by oil motors. Adjustable centering rollers. As infeed for resaw / multirip saw etc. Bwjdsnqzuyjpfx Al Iel

Condition: excellent (used), functionality: fully functional, Complete hydraulic feed unit for EWD Esterer creel type HDE. Bwodorrxtpepfx Al Iel Very well maintained. Infinitely variable from 0 - 12m / min.

Year of construction: 2008, condition: excellent (used), Sorting system for small-diameter wood and stakes for RH milling machines or other purposes. Consisting of: Inclined feed with retaining hooks. Disc sorting / cascade system with 3 separation steps. Wood length from 0.3 m to 5.5 m. Wood diameter up to approx. 12 cm. Ready for demonstration. Bjdpfxjwqdc Rs Al Iowl

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Sorting system for small-diameter wood and stakes for RH milling machines or other purposes. Bedpewqf S Hsfx Al Iewl Consisting of: Inclined feed with retaining hooks. Disc sorting / cascade system with 3 separation steps. Wood length from 0.3 m to 5.5 m. Wood diameter up to approx. 12 cm. Ready for demonstration.

Condition: new, Shaft diameter: 180Upper Roll Diameter: 60Bottom Roll Diameter: 50working speed: 5motor power: 3length: 1200width: 850heigth: 1200weight approx.: 1000 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending Bodsd Ab H Nepfx Al Iewl - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: used, The machine is fully operational and ready for work, made of stainless steel (Inox). Screw length: 3500 mm Discharge height: 1350 mm Screw diameter: 250 mm Please check out my other listings as well. Bwodpfjy Ivgpjx Al Iel

Condition: good (used), Wire feed drive for wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder, actuator, actuator, air damper actuator, geared motor -Manufacturer: ELVI, actuator -Actuator: Type 100605 -Voltage: 24 V -Number: 6x drive units available Bwjdpfx Alergbu Hs Isl -Price: per piece -Dimensions: 220/200/H120 mm -Weight: 1.9 kg/pc.

Condition: used, empty load weight: 7,540 kg, maximum load weight: 31,460 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 06/2011, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: white, Year of construction: 2011, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40612 Feldbinder, EUT 55.3 * Year of manufacture: 2011 * ABS (Anti-lock Braking System) * Alloy wheels * Air suspension * Steering axle * Air coupling head (red & yellow) * 15-pin connector * Lift/lowering device * Storage/tool box * Hose box left and right * Bottom outlet * Folding ladder & railing * Baffle wall * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 7,540 kg * Payload: 31,460 kg * Permissible GVW: 39,000 kg * Axle manufacturer: Daimler Bedjyicwgspfx Al Ijwl * Tire condition 1st axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 30% -- 30% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 20% -- 20% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Manufacturer: Heitling * Volume: 54 m³ * Tridec steering system Disclaimer: Specifications subject to change, prior sale, and errors excepted. Find more photos and videos on our homepage. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, hassle-free financing * Processing of all (export) documentation * Order of export/customs license plates * Vehicle reconditioning: new tarpaulins, lettering, painting, etc. * Professional loading & load securing * TüV inspections, registration service * Transportation of commercial vehicles Contact our trained specialists—we are happy to advise you.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Bwodpjyucd Tsfx Al Ijl Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: good (used), Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate, mounting flange -Muck flange: Mounting flange for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 162 mm -Socket: Short cone 5, cone Ø 79 - 82 mm -Hole circle: Ø 105 x 10 mm / Ø 62 mm M10 Bwodpjykpt Tofx Al Iol -Passage: Ø 41 mm -Dimensions: Ø 162 x 48 mm -Weight: 4.7 kg

Condition: good (used), Machine type: Vibratory bowl feeder / Parts feeding systems Design: Bowl feeders and linear tracks Version: Multiple feeding systems available Conveying system: Vibratory bowl feeder with linear track Feeding unit material: Stainless steel / Metal construction Function: Automatic feeding and orientation of plastic parts Application area: Injection molding automation / Assembly systems / Packaging lines Buffering system: Bowl container for parts storage Integration: Component of automated production lines CE marking: Available Further information, technical specifications, and quantity upon request. Bjdjytqgmepfx Al Ijwl