Used Feeder Moulder for sale (3,096)

Condition: used, For sale: a Haas Servo Bar 300 bar feeder. It has been unused for over 10 years due to lack of space. Bjdjzt Tmuspfx Al Aewu

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeder Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-N200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 250 mm Bowl diameter (bottom): 190 mm Bowl internal height: approx. 45 mm Sorting track width: approx. 3 mm Overall height (drive + bowl with sorting track): 240 mm Bwodpfx Aoy Tpttsl Aeu Power connection: 230 volts, 50 Hz - Conveyor spiral made of metal Space requirement Ø x H: 260 x 240 mm Weight: 13.5 kg Good condition Matching control units with suitable connection plugs are available under stock numbers: 61867, 61866, 61856, 61858, 61889.

Condition: used, Eccentric stamping press HAULICK + ROOS, Type RVD 125 Double-column eccentric press Machine No. 212560, Year of manufacture 1981 Pressing force 125 tons Table size 880 x 800 mm Table opening 470 x 140 mm Column distance 900 mm Column distance, side 415 mm Ram stroke 45 mm Ram adjustment range 0-80 mm Bwedpfx Alehlnzke Aou Installed height as shown in the picture 340 mm Stroke rate 50 to 300 strokes/min Motor power, main drive 22 kW Power connection 380 volts, 50 Hz - Double connecting rod drive with 4-bearing eccentric shaft for off-center ram pressure load - Adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of manufacture 2003 - Adjacent control panel for the roller feed - Strip feed direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press approx. 11 tons

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: ABC 8.20, power: 1.47 kW (2.00 HP), fuel type: electric, Clay, sand, and soil feeder Bsdpfjv Tlc Ssx Al Aewu - consisting of an 800 mm wide, 2 meter long conveyor belt with a material receiving hopper of approximately 1 m³; - flow rate of 3.25 to 56 m³/h controlled by a frequency inverter - equipped with a lump breaker/picking arm mounted on a shaft to scrape the material and regulate the flow rate

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 20190824, spindle diameter: 125 mm, total width: 1,600 mm, total height: 1,680 mm, total length: 3,040 mm, overall weight: 2,700 kg, spindle speed (max.): 6,800 rpm, workpiece height (max.): 100 mm, type of input current: three-phase, workpiece width (max.): 180 mm, input voltage: 380 V, table length: 2,000 mm, number of spindles: 4, power: 28.75 kW (39.09 HP), input frequency: 50 Hz, Description: -Solid construction cast iron and welded metal frame -Working table fully cromed to ensure firm advance of materials -side guide rollers for materials with pneumatic driving -professional cardan transmission for the feed system -feed speed up to 33m/min mechanically adjustable with mechanical variator with with elastic pulley -manual central lubrification pump -radial and axial adjustment of the working axes with mechanical displays for precise positions -electrical adjustment of working thickness -ergonomically positioned contro panel according UE standard -Hours:200 hours -Technical data: Bwodpfxez E H H Nj Al Asu -electric connected load-21 kw -operating voltage:400v,50hz,3 phase -air required pressure:min 6bar -dimension: 3040x1600x1680mm - -weight:2800 kg -food table length:2000 mm -steplessly adjustable feed speed 8-33 m/min -axes diameters:40 mm - Ax1 - down: Ø125mm (Ø152mm channel cutter), 4kW -Ax2 - right: Ø115-170mm, 4kW - Ax3 - left: Ø115-170mm, 4kW - Ax4 – up: Ø105-150mm, 5,5kW -axis rotation:6800 rpm -advance engine power:3kw -dimension rolling advance: Ø140x35x50 mm -exhaustive dimension: 4x120mm Technical data of the material: -materials width: 20-180mm -material thickness: 8-100mm

Condition: used, Year of construction: 2006, overall weight: 4,740 kg, FANUC Series 18i-TB control unit, with TOP AUTOMAZIONI FU350SX hydraulic cylinder – year 2024 Bodpfx Ajzxr Dcsl Aowu Workholding fixtures and tools not included. AVAILABLE: November 2026

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063528, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: Bjdpfx Alsxx Si Eo Aswu - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition

Condition: used, Year of construction: 2005, Koenig Combi line KCL/13 modular bun roll line for the production of high quality products: round, oval, , long rolled , flattened working width 800mm Konig Rex Futura II headmachine 3, 4 or 5 rows SK58 + SK70 weight range 35-135 gram Bwodjzh Ncbspfx Al Aeu capacity 3, 4, 5 row maximum 4500, 6000 or 7500 pcs/h Siemens Simatic controlling with touch panel pre-rolling unit pre-prover VG190 long roll unit RR800 setting unit AS800/1200 year of build 2005 pictures BEFORE reconditioning

Condition: excellent (used), Year of construction: 1997, Very well-maintained 4-sided planer, with low usage. Maximum working width: 230 mm Maximum working height: 120 mm Spindle motor power: U: 5.5 kW L and R: 7.5 kW Bwedpfx Alezlk U Hs Asu O: 5.5 kW Equipped with Tersa planing heads.

Condition: used, Year of construction: 2006, machine/vehicle number: 020650SA07, Short bar loader, maximum length 2100 mm, minimum/maximum diameter 8-80 mm. Two kits included: 46-66 mm guide channels / 45-65 mm bar pushers. It was fitted to a Tsugami MO8SYE machine. Bedpfx Alezqnhho Aewu

Condition: used, used Cleaned, functionality tested, test run performed, partially refurbished 16 A cable installed Bwjdpfey Ay Awsx Al Aou Belt renewed Runout measured New wooden jaws attached Manufacturer: Bäuerle Type: SFM Motor: 4, 5.5 hp Motor: 2 speeds/pole-switchable 6 speed levels: 2800 / 4500 / 6000 / 5600 / 9000 / 12000 Foot brake Right-left rotation Spindle diameter: 30 + 40 mm Table size: 1100 x 900 mm Wooden stop jaws: new Belt: new Milling stop with fine adjustment Space requirement: approx. 1000 x 900 x 1000 mm Weight: approx. 600 kg Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: used, Year of construction: 1980, Martin Spindle Moulder Model: Martin T 23 Year of manufacture: 1980 Spindle diameter: 30 mm Spindle stroke: 145 mm Max. tool diameter: 250 mm Pole-changing motor: 4.7/5.7 kW 2 speeds: 3000, 6000 rpm Table size: approx. 940 x 1100 mm Bodpfx Aey Rzytsl Aswu Table height: approx. 850 mm Automatic motor brake Emergency stop switch Weight: approx. 800 kg

Condition: good (used), Year of construction: 2008, Parts shown by hand not come. Bsdpfxozl D Hps Al Aswu

Condition: good (used), Year of construction: 1985, WEINIG HYDROMAT 22B Weinig automatic infeed device, type : EM2 Max working width : 220 x 140mm Spindle diameter : 50mm Bjdpfx Aljxbn T Eo Aewu Infeed engine : 7,5 Kw Spindle configuration : 1. Under 7,5 Kw 2. Right 7,5 3. Left 7,5 4. Top 18,5 5. Under 30 6. Under 11 7. Top 11 Infeed speed : 5 - 60 mtr/min ( Frequenz controlled ) Infeed : Kardan, with 5 driven rollers inbeded in the table Lots of heads/tools included

Condition: used, Year of construction: 1998, Bottom right left top bottom universal working width 220 mm Bwodpfxsxdw Uds Al Aou working height 120 mm

Condition: used, Robland NLX1700 panel saw and spindle moulder, very good condition, 2x3 kW, approx. 2000 mm cutting length, approx. 100 mm cutting height, 1700 mm sliding table length, approx. 450 kg Bodpfswzzh Eox Al Aewu Subject to price changes, errors, misprints and typographical mistakes excepted.

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top. Bwsdohlp D Nepfx Al Aou

Condition: reconditioned (used), Year of construction: 2000, machine/vehicle number: KK052469, functionality: fully functional, Connection value: 380V, 4kW Table size: 1070 x 620 mm Swivels with hand crank, 45° Height adjustment with hand crank Right/left rotation Motor brake Socket for feed device Protective covers for handheld routers Spindle diameter: 30 mm Aigner stop Bodpoiinm Hefx Al Aswu Dust extraction connection: 2x 120 mm Speeds: 1400/3500/6000/8000 RPM Operating manual

Year of construction: 2016, condition: excellent (used), 1 used short bar loader Manufacturer: Breuning Type: ILS RBL 80/12 Bwsdpfjht Rl Eex Al Aju Year of manufacture: 2016 Clamping range: 5-80 mm diameter Length: 100-1200 mm

Condition: ready for operation (used), Year of construction: 2023, WP Miniroll compact roll line with high capacity and maximum flexibility. The Werner & Pfleiderer MiniRoll Roll Line is a highly compact and efficient solution for the production of premium-quality small bakery products. Thanks to the integrated Multimatic dividing technology and built-in drum round moulder, this line delivers consistent product quality, excellent hygiene and impressive output – all within a minimal footprint. year of build 2023 only 51 working hours! suited for the production of: • Long-rolled rolls • Round rolls  5-row configuration with 600 mm working width Integrated Multimatic Pro G 2 dividing head, up to 150 gram Dividing range from 55 g to 150 g, measuring piston 55 mm Hourly capacity pieces/hour 3000 Built-in dividing and rolling head Motorized weight adjustment for consistent product results Bwodpox Thvmefx Al Aju Manual pressure adjustment for precise shaping control Adjustable moulding belt and length-forming unit with pressure plate Resting time of 6 minutes Suitable for trays 600×400, 600×800 and 580×980 mm Integrated storage for up to 3 rolling drums Automatic cleaning positioning Router for remote access

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Bwjdpfx Alex R Df Sj Aou Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: used, Year of construction: 2001, total length: 2,680 mm, total width: 1,200 mm, total height: 2,200 mm, Colour: Grey Empty weight: 950 kg Price: On request Table milling machine Hofmann TFS 1200 Serial no. 127-01204 Year of construction 2001 7.8kW, 16amp, 400V 45 degree tilt adjustable. Aigner guide Feeder - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 127-01204 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 2680 - Table width [mm]: 450 - Tiltable spindle: Automatic - └ Min. tiltability [°]: 0 - └ Max. tiltability [°]: 45 Bwjdpfx Aewl I E Eol Asu - Feeding device present: Yes - Brand: Masterwood - Type: Euromeo - Number of wheels [pcs]: 4 - Number of speeds: 2 - Guide present: Yes - Brand: Aigner - Min. spindle speed [rpm]: 3000 - Spindle speed control: Incremental - Transport dimensions: 2680mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), Year of construction: 2003, Koenig Mini Rex 4000 bun roll machine 2-pocket Bwodjrf Dn Eepfx Al Aou new drum and pistons SKG54-AKG70 weight range 25-140 grams cap. pcs/h 4000 year of build 2003

Year of construction: 2007, condition: ready for operation (used), KAESER BB 88 C TURNING PISTON BLOWER, PVC POWDER FEEDER Bwodpfx Alsqafbzj Aou Unit: BB 88 C. Year of construction: 2007 Pumping speed: 5.07 m³ / min. Final pressure (abs): 1.01 bar Maximum pressure difference: 500 / mbar Rated motor power: 7.5 KW Block speed: 4,270 rpm Condition: very good Hablamos español Nous parlons français We speak English

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Bodsu Agh Sopfx Al Aowu Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location