Used Feeder Moulder for sale (3,209)

Condition: excellent (used), Catalogue number 7784 TECHNICAL DATA Dcedpfx Akey Tivhjrjk - Spindle diameter: 30 mm - Working height of spindle: 150 mm - Interchangeable spindle - Spindle locking - Adjustable up/down + angle - Original cast iron fence with full adjustment - 4 spindle speeds + left/right: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800 mm - Motor: 3.7 kW - Dimensions (L/W/H): 1100x1400x1160 mm - Weight: 775 kg ADVANTAGES – German-made – Used milling machine – Very good condition Net price: 6,900 PLN Net price: 1,640 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, functionality: fully functional, screw conveyor length: 5,000 mm, pump capacity: 1,000 l/min, For sale is a flexible screw conveyor for bulk materials, with a 5-meter hose length, a three-phase motor, and a reduction gearbox. The unit does not operate within a rigid pipe but rather within a flexible plastic hose, making it easily transportable, versatile in use, and gentle on the material being conveyed (low dust and noise generation). We purchased the unit used and tested it briefly. It proved unsuitable for our specific material (too moist for this hose type) but was always fully functional and ready for use. It is ideal for dry, free-flowing bulk materials such as grain, pellets, or sawdust/wood dust. It is not suitable for wood chips (too coarse/irregular for the hose). Equipment: - Flexible hose with a conveying screw made of spring steel - Inlet with protective grid and slide gate - Drive located at the top, with a three-phase motor and a flange-mounted reduction gearbox - Easily transportable, universally applicable - Connection cable with switch (6m) Technical data: Parameter Value Overall length 6 m Hose length 5 m Hose inner diameter 75 mm Smallest bending radius in operation approx. 1.5 m Conveying height up to approx. 3 m Conveying capacity approx. 1,000-1,200 kg/h (for grain) Motor Three-phase motor 400V / 0.75 kW Connection cable 6 m, with switch in the middle of the cable Plug CEE 5x16 (16A) Weight 42 kg Packaging dimensions (with pallet) 120 x 120 x 35 cm Scope of delivery: 1x Screw conveyor with gearbox and motor 1x Connection cable with switch Condition: Used, very little use, fully functional. No defects; simply unsuitable for our specific (too moist) material. Dcjdpezrzklofx Akrsk Location: 6064 Kerns (self-collection; transport can be arranged).

Condition: used, Used machine Equipment and technical data: Dcsdpszlbqxsfx Akrok - Table size: 800 x 1000 mm - Diameter of the table opening: 480/380/170/125 mm - Taper of the milling spindle: MK 5 - Speed of the milling spindle: 3000 rpm - Height adjustment range of the milling spindle: 150 mm - Distance from milling spindle centre to front table edge: 400 mm - Largest permissible tool diameter: 250 mm - with wooden stop jaws (can be exchanged for metal stop jaws on request) - with Holz-Her 3-roller feed unit - with heavy sliding table; runs on ball bearings on absolutely parallel-milled guideways - Weight: approx. 800 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Dodju Agh Sopfx Akrock Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), Year of construction: 2021, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: three-phase, table width: 2,700 mm, Equipment: CE marking, We are offering this very well-maintained HOFMANN UFM 210 Vision table milling machine, Hofmann UFM 210 Vision Touch, manufactured in 2021. Machine designation: Universal table milling machine Type: UFM 210 Vision Machine number: 270-33529 Voltage: 400 V Frequency: 50 Hz Phases: 3/N/PE Power: 7.5 kW Current: 21 A Year of manufacture: 2021 Dcodpfx Akszlytxerjk If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1999, Second-hand machine Year of manufacture: 1999 Features and technical specifications: Dedpfx Akozk N Tfsreck - with swivelling spindle: 0° – 45° - with aluminium roller table - Table dimensions: 1100 x 620 mm - Working height: 880 mm - Roller table dimensions: 900 x 200 mm - Roller table travel: 900 mm - Milling spindle diameter: 30 mm - Milling spindle stroke: 150 mm - Speeds: 3100/4600/6200/8000 rpm - Motor: 4 kW - with 4-roller feed unit - Dimensions: 1200 x 1000 x 1400 mm - Weight: approx. 490 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2002, Second-hand machine Year of manufacture: 2002 Features and technical specifications: - Control display on the upper control panel - Control panel can be swivelled and extended - Swivelling milling spindle - Swivel range of the milling spindle: +/- 45° - Milling spindle stroke: 150 mm - HSK80 quick-change milling spindle system - Milling arbor 30 mm - Electromechanical spindle locking mechanism - Frame support 1,340 mm at the machine table, extendable by approx. 700 mm - Table extension on the right - Table extension on the left - 2-axis positioning control for height and swivel adjustment, digital LED displays - Voltage 400 V / 50 Hz - Power socket - Automatic motor start via contactor control - 7.5 kW main motor, frequency-controlled / continuously variable speed control - Milling stop type 203 with handwheel adjustment on both sides - Centrex Type 1624 milling protection and clamping device - ZEROMASTER reference dimension setting device - Wegoma Variomatic 4N feed unit: 4-roller feed unit Dodpfx Aszk N Sbokreck Variable feed speed 2–18 m/min Clockwise and anti-clockwise rotation Suitable for both horizontal and vertical use Memo-Lock system for easy swivelling and repositioning Digital height display Height adjustment from the operator’s side Generously sized locking levers Maximum reach 1,050 mm thanks to extended tube - Dimensions: 260 x 180 x 130 cm - Weight: approx. 1,100 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1984, Second-hand machine Year of manufacture: 2007 Features and technical specifications: - Motor 4.7/5.7 kW, pole-changing - with clockwise/anti-clockwise rotation - MK 5/30 mm milling arbor - Height adjustment via handwheel - Speeds: 3000/4500/6000/9000 rpm - Milling stop with metal jaws Mounted on a round turntable and therefore rotatable through 360° Dodpfx Aszk N R Rjkrock - with table extension on both sides, featuring extendable frame supports - with a roller table attached to the left-hand side Please note! The table extension was fitted at a later date! To use the roller table, it must this must be removed again! - with 4-roller feed mechanism, built in 2007 - Dimensions: 240x65x120 - Weight approx. 900 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Second-hand machine Features and technical specifications: - heavy-duty cast iron construction - Motor: 5.5 kW - Spindle diameter: 30 mm - 2900–4400–6000–7800–10,000 rpm - Height and swivel adjustment: electrically driven - Fine adjustment: via handwheel - with Panhans metal stop jaws - with Holz-Her 3-roller feed mechanism Availability: at short notice Djdpfx Akszk N R Derock Storage location: 63934 Röllbach

Condition: used, Year of construction: 2000, Second-hand machine Year of manufacture: 2000 The T 110 is SCM’s table router, offering an ideal combination of quality and an affordable purchase price The structure is extremely sturdy For ease of use, all controls are within easy reach on the front of the machine Precise height adjustment of the tool is ensured by a mechanical indicator Spindle tilt from -5 to +45 degrees Dcsdszk N Rdjpfx Akrjk Table size 1000 x 750 mm Spindle clamping length: 140 mm Spindle overhang from the table: 20 mm Spindle speeds 3,000–4,500–6,000–9,000–10,000 rpm Max. diameter of the tool that can be lowered beneath the table: 320 x 40 mm Profiling tool, max. 250 mm Motor 4 kW Extraction nozzle 120 mm with 3-roller feed mechanism Weight 520 kg Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 1994, Second-hand machine Year of manufacture: 1994 Features and technical specifications: - Length of the planing table: 2,100 mm - Tool spindle diameter: 30 mm - Planing head diameter: 100 mm - Speed of the planing shafts: 6,000 rpm - Working width: 30–180 mm - Working height: 6–120 mm - Motor power (bottom, left, right): 3.7 kW each - Upper motor power (thickness shaft): 5.5 kW - Feed speed: 6 and 12 m/min - Electric height adjustment - with 1/10-step control Dcedpfx Akozk N I Ajrsk - including cycle-controlled feed roller - Including planing heads - Extraction ports 160/120/120/140 mm Availability: available at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1963, Rigid milling machine Year of manufacture: 1963 Dodszk N Iiepfx Akreck Spindle diameter 30 mm Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 1981, Second-hand machine Year of manufacture: 1981 Dcjdpfxszk N Dqs Akrjk Features and technical specifications: - with dual pneumatic lifting spindle - Mandrel diameter: 40 mm - with a long table length: 2500 mm - with extendable frame support - with milling stop featuring Panhans metal stop jaws and fine adjustment Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 1986, Second-hand machine Year of manufacture: 1986 Features and technical specifications: Dedpfozk Nw Rex Akrock Motor: 4 kW Speeds: 3,000 / 4,500 / 6,000 / 8,000 / 1,000 rpm. Spindle height adjustment via handwheel Dimensions: 1200 x 80 x 1350 mm Wooden clamping jaws Includes Holz Her 3-roller feed unit and stand with chassis Availability: at short notice Location: Röllbach

Condition: used, Second-hand machine Features and technical specifications: - Vertical travel of the spindle: 150 mm - Spindle diameter 30 mm - Spindle speeds 3,500–7,000 rpm - with rigid spindle - Motor 2.5–3.1 PS - Table 830 x 700 mm - Slotted discs up to 340 mm - with metal-jaw milling stop (Please note: the Aigner parallel guide shown in the pictures is not included in the scope of delivery!) - with 3-roller feed mechanism Dodpozk Nt Sofx Akrsck Weight: 240 kg Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: Automatic height and swivel adjustment of the spindle with decimal pulses Mechanical display of spindle height and electrical display of tilt adjustment Hinged hood with aluminium guides Adjustable table top opening via table slide System for quick tool change Djdszk Nq Ropfx Akrjck with long tables and extendable workpiece support Table size 2500 x 780 mm Spindle adjustment – 45° to +45° Spindle diameter 30 mm Spindle stroke 230 mm Max. table opening: 300 mm 5.5 kW motor with automatic star-delta start with clockwise and anti-clockwise rotation Speeds: 3000/4500/6000/8000/10000 rpm Electronic programming of spindle height, spindle tilt and stop position (milling stop) Extraction at top and bottom: 120 mm Dimensions 2570 x 1450 mm Weight approx. 670 kg Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, machine is unused Features and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Useful length of the spindle: 125 mm - Spindle mandrel diameter: 30 mm - Speed display: LED display on the front of the machine - Max. tool diameter (standard): 240 mm - Maximum tool diameter that can be lowered: 230 mm - Maximum tool diameter for profile milling: 240 mm - Maximum tool diameter for tenon milling: 320 mm - Work table length: 1,200 mm - Work table width: 530 mm - Table height: 900 mm - Slide carriage length: 1,200 mm - Slide carriage width: 360 mm - Slide carriage height: 142 mm - Extraction nozzle diameter: 2 × 120 mm Dcodpfxozk Nn As Akrjk - Drive motor power: 5.0 kW - Mains voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: at short notice Storage location: DE-63934 Röllbach

Condition: used, Year of construction: 1996, Second-hand machine Year of manufacture: 1996 Features and technical specifications: - The basic principle of Hofmann machines is their tried-and-tested cast iron construction - Grey cast iron is by far the leader in vibration damping, compressive strength and load-bearing capacity - Milling spindle 30 mm with clockwise and anti-clockwise rotation - Milling stop with stop jaws, central adjustment and single-sided fine adjustment of the jaws - Manual height adjustment with digital display and zero-reset button - Table dimensions: 1200 x 820 mm Dodpfjzk Nnpex Akrock - Table height: 890 mm - Motor power: 5.0/6.2 kW - Spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm - Height adjustment: 125 mm - Chip extraction connection: 110/120 mm - with Holz Her 2-roller feed mechanism Weight: 850 kg Availability: by arrangement Storage location: 63934 Röllbach

Condition: used, Year of construction: 1994, Second-hand machine Year of manufacture: 1994 Dcsdpfx Aozk Nk Rokrok Features and technical specifications: - Grey cast iron table, surface ground and hardened - Spindle adjustment via handwheel and scale on the front - 4 speeds with electric speed display - External spindle lock - Milling stop with fine adjustment on both sides + central adjustment - Motor brake - Extraction ports top + bottom - Spindle: 30 mm - Motor: 4 kW - Table dimensions: 1100 x 700 mm - Spindle speeds: 2900/4400/6000/8000 rpm - Vertical spindle adjustment 220 mm - Table opening 300 mm - Effective length of milling spindle: 1890 mm - Extraction connection: 150/120 mm - with 4-roller feed mechanism Weight: 600 kg Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 1991, working width: 220 mm, spindle diameter: 40 mm, working height: 120 mm, total width: 1,500 mm, total height: 1,500 mm, total length: 3,900 mm, overall weight: 2,000 kg, jointer table length: 2,000 mm, number of spindles: 4, chip removal: 10 mm, No. 04530 Four-sided planer and moulder WEINIG Quattromat 22 Used, year of construction 1991, very good condition, machine comes from a one-man workshop Four-sided planing and moulding machine with continuous feed Spindle configuration: 1st spindle bottom / 2nd spindle right / 3rd spindle left / 4th spindle top Infinitely variable feed 6 - 22 m/min Infeed table length 2000 mm Working width 25 - 220 mm Working height 6 - 120 mm Max. material removal 10 mm Diameter of the spindles 40 mm Motor power of the 1st spindle bottom 4 kW Combined motor power of the 2nd spindle right and the 3rd spindle left 5.5 kW Motor power of the 4th spindle top 5.5 kW Serrated steel infeed rollers Rubber outfeed roller Rubber roller in the table Including operating tools and spare rollers Including operating manual as a .pdf-file Transport dimensions approx. 3900 x 1500 x 1500 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Djdpfezl Uukjx Akreck Delivery terms: ex warehouse

Condition: new, Year of construction: 2024, functionality: fully functional, We offer two new LNS bar loader magazines, model LNS GT 326. Djdpfx Akszl S Nrsreck The mounting side is on the right.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 119291, planing height: 160 mm, planing width: 260 mm, We are offering this well-maintained Weinig Powermat 600 planing and rabbeting machine, manufactured in 2014. Manufacturer: Weinig Model: Powermat 600 Dodpjzltp Tefx Akreck Year of manufacture: 2014 Condition: good Machine type: Planing and rabbeting machine Zuani/Kanefusa tools for moulding, window, and post-and-beam construction can be purchased for 8,000 EUR (original price 18,000 EUR). If you have any questions or require further information, please send us a message or call us.

Condition: used, Feed unit MAKA -used- infinitely variable feed speed ----- Technical data ----- Dcjdeu R S R Uspfx Akrsk Rollers: 3 pieces

Condition: new, VSA 2048 L Holzkraft Feeder - Exhibition Machine - - Number of feed rollers: 4 - Feed speed: 2 - 33 m/min - Speed levels: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33 m/min - Maximum projection: 1050 mm - Roller diameter: 120 mm - Roller width: 60 mm - Roller spring travel: 20 mm Dimensions and weights: - Length (product) approx.: 1665 mm - Width/depth (product) approx.: 220 mm - Height (product) approx.: 540 mm - Net weight approx.: 73.5 kg - Explanation of net weight approx.: including stand Electrical data: - Drive motor power: 0.75 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - New exhibition machine - Dodpfx Akowfhg Njrjck

Condition: reconditioned (used), Year of construction: 2015, Number of spindles 9 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 7,5 kW Working speed 6-36 m/min weight of the machine ca. 6500 kg Control CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015; currently undergoing partial recondtionning in stock ----- Summary: - 9 spindles (including 4 x HSK 85 S) - Electronic horizontal and vertical positioning - 8,300 rpm - SCM "Set-up" - SCM "T-Set" - Includes workpiece infeed magazine Working dimensions: - Maximum working width: 240 mm - Minimum working width: 25 mm (reducible to 15 mm via installed special kit) - Maximum working height: 120 mm - Minimum working height: 10 mm (reducible to 6 mm via installed special kit) Special working cross-section equipment: Equipped with a special kit for extremely small minimum cutting dimensions of 15 x 6 mm. Infeed table and table surfaces: - Infeed table length: 2,500 mm (2.5 meters) - Surface finish: Wear-resistant, special chrome-plated finish for optimal sliding properties and minimal wear. Spindle specifications: 1. Spindle: 1st horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 6,000 rpm - Shaft: High-precision spindle, 40 mm diameter 2. Spindle: 1st vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 3. Spindle: 1st vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, tool diameter positioning 4. Spindle: 2nd vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 5. Spindle: 2nd vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, Tool diameter positioning 6. Spindle: 1st horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - "SET UP" tool diameter adjustment: Electronic tool diameter regulation, tool diameter positioning 7. Spindle: 2nd horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 8,300 rpm Djdpfxezl Hbij Akrsck - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 8. Spindle: 2nd horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spind...