Used Felder K 900 S for sale (144)

Condition: excellent (used), For sale is a Felder FD-250 long-hole drilling machine. The machine is currently used in our showroom as a demonstration model. Therefore, it can be described as being in new condition and comes with a full warranty. Technical specifications: - Drilling height adjustment with handwheel: 130 mm - Table size: 550 x 300 mm (expandable with table extensions) - Drilling length: 250 mm / drilling depth: 160 mm - Clamping device and 90° stop - 3 HP (2.2 kW) motor, 400 volts The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! For further information, please call: 03137-3109 Related terms: Long hole, drilling machine, dowel drilling machine Reference: R-D1618 Psdszgr Drepfx Am Tspw

Condition: ready for operation (used), Year of construction: 2019, This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine. • Control system: x-motion PLUS • Chain feed • Feed speed: 10 m/min • Drive motor: 0.75 kW (S6) – 1.1 kW (S6) • Minimum workpiece length: 140 mm • Minimum workpiece width: 70 mm • Note: Minimum width varies depending on workpiece length, height, and surface finish. • Turntable edge magazine (rolled edge material) • Turntable diameter: 750 mm • Edge thickness: 0.4 – 3 mm • Extendable frame • Workpiece support extendable up to 450 mm • Upper pressure bar • Manually adjustable workpiece height: 8 – 60 mm • Edge feed • For rolls and rigid material • Joining unit • Power: 2.2 kW (2 × 1.1 kW) • Diamond cutter Z2 • Speed: 12,000 rpm • Gluing unit • Teflon-coated for 1.5 kg EVA or PUR granulate • Ready after approx. 10 min heating time • Tool-free quick-change system • Pressure unit • Pneumatically controlled • 1 driven and 2 conical pressure rollers • Shear • For roll edge material thickness: 0.4 – 3 mm • Cutting unit • Two high-frequency motors, each 0.35 kW, 12,000 rpm • Pneumatically swiveling 0° – 10° • Multifunctional milling unit (x-motion PLUS) • Flush and radius milling Ppedpsx D D R Ssfx Am Tow • One HF motor top and bottom, each 0.75 kW, 12,000 rpm • Each with 4 interchangeable blades • Corner processing unit • For soft and postforming workpieces • Front edge processing • Edge thickness: 0.4 – 3.0 mm • Workpiece height: 10 – 60 mm • Radius scraper unit • 2-axis motor-driven, position-controlled • Pneumatic release function • Polishing unit • Top and bottom

Condition: ready for operation (used), machine/vehicle number: Sn96,5Ag3,0Cu0,5, functionality: unexamined, Felder Sn96.5Ag3.0Cu0.5 lead-free solder wire, 0.5 mm ! Sold only in lots of 10 pieces ! Ppedpfx Amjynhtas Tjw Manufacturer: Felder Model/Alloy: Sn96.5Ag3.0Cu0.5 Net weight: ~0.25 kg

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes Pjdpfx Aexix Hxom Tepw End trimming unit: Yes Radius milling unit: Yes Radius scraper: Yes

Year of construction: 2021, condition: ready for operation (used), This Felder RL 300 was manufactured in 2021. It features a new extraction system, never used, with a maximum volume flow of 6000 m3/h and a nominal volume flow at 20 m/s of 5090 m3/h. The machine includes a filter area of 50 m2 and dual 250-liter chip collection containers. Sound pressure level is at 75 dB. For more information about this machine, please reach out to us. • Volume flow: Max 6000 m3/h • Nominal volume flow 20 m/s: 5090 m3/h Ppodpex D Ex Rjfx Am Tjw • Negative pressure at total connection at 20 m/s: 2680 Pa • Extraction connection: Ø 300 mm • Filter area: 50 m2 • Sound pressure: 75 dB • Chip collection container: 2 x 250 liters • Extraction connection can be mounted on the left or right

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depends on clamping system) Psdpex D D Hmsfx Am Tspw • Operating terminal on left side of machine • Hand terminal with axis speed control and emergency stop • Software: Woodflash (CNC board, tool database, program editor) • Positioning display for workpiece support and vacuum suction cups • Vacuum connection for template milling (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction power 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-station linear on left side of machine stand, incl. pickup space for aggregates; max tool diameter 250 mm; max tool length 240 mm • Drill head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling length 70 mm; shank Ø 10 mm • Groove saws: 2 (one X, one Y); max blade Ø 120 mm; max thickness 5 mm; continuously variable speed up to 7,500 rpm • Safety: front light barrier system

Condition: ready for operation (used), Year of construction: 2021, This Felder FW 1102 P was manufactured in 2021. A used wide belt sander featuring a contact roller unit and a fine sanding with segmented electro-pneumatic sanding shoe. It includes a 7" touch color screen, digital grain compensation, and a vacuum table. The feed speed is variable from 2.5 to 18 m/min, sanding width of 1100 mm, and height range from 3 to 170 mm. Consider the opportunity to buy this Felder FW 1102 P belt sander. Contact us for more information. Ppodsx D Eyhopfx Am Tsw • Contact roller unit • Fine sanding with segmented, electro-pneumatic sanding shoe, 25 mm segment width • 7" color touch screen • Digital grain compensation • Vacuum table with blower integrated in the machine stand • Infinitely variable feed speed 2.5–18 m/min (controllable from the touch screen) • Sanding width: 1100 mm • Sanding height: 3–170 mm • Sanding length: 1900 mm

Condition: new, New Tempora F400 45.03LX Edgebanding Showroom Machine Full Options Large Display Podpfx Asziwxasm Tjpw

Condition: new, Year of construction: 2021, functionality: fully functional, Clean air dust extractor, mobile, certified for H3 residual dust concentration. The residual dust concentration of the air is below 0.1 mg/m³! This is achieved by the high-quality filter elements and the fan blades located on the clean air side. Dimensions: - Total length (A): 2275 mm - Total length (A1): 2640 mm - Total length (A2): 1165 mm - Total width (B): 1140 mm - Total width (B2): 1150 mm Psdpfsy R D Sxsx Am Topw - Machine height (C): 2260 mm - Machine height (C2): 725 mm - Performance Data: Max. volume flow: 6000 m³/h Nominal volume flow at 20 m/s: 5090 m³/h Nominal pressure at 20 m/s extraction speed: 2680 Pa Extraction connection Ø: 300 mm Cartridge filter – Filter area: 50 m² Sound pressure level: 75 dB Chip containers: 2 x 250 l

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 305.12.001.24, functionality: fully functional, operating hours: 282 h, travel distance X-axis: 3,260 mm, travel distance Y-axis: 1,630 mm, travel distance Z-axis: 225 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 85 mm, number of axes: 3, number of slots in tool magazine: 8, actuation type: electric, total length: 3,260 mm, total width: 1,630 mm, table length: 2,500 mm, table width: 1,250 mm, Equipment: CE marking, For sale: CNC machining center PROFIT H08 13.25, year 2024 Technical data: Axis travel: X = 3260 mm Y = 1630 mm Z = 225 mm Working area: X = 2500 mm Y = 1250 mm Z = 85 mm Equipment: Matrix worktable Stops around the working area Guide system in X, Y, and Z axes Automatic central lubrication High-performance vacuum system (180 m³/h) Psdpoyzfaxsfx Am Tepw 10 kW HSK F63 electrospindle DH8 drilling head 8-position tool magazine (side-mounted on the machine frame) Control terminal for machine operation Electrical control cabinet CE-compliant safety system I can send a video of the machine in operation. Net price – VAT invoice 23%.

Condition: used, Bandsaw Hammer 4400, in very good condition, 1.5 kW, approx. 110 kg Pjdpsx H Ud Rjfx Am Tjpw Price changes reserved, errors, printing and typographical mistakes excepted.

Condition: excellent (used), Felder TEMPORA F600 edge bander with glue box Liquids Pre-milling cutters, Glue application with roller, Interchangeable glue tank Second tank included Features glue box, enabling edge banding with PUR glue Pneumatic pre-cut guillotine Liquids End-trimming sawblades Top/bottom trimming unit Corner rounding unit, Psdpfey N Sdyjx Am Topw Profile scraper Cleaning fluids Flat scraper Polishing unit The machine has NC control Max workpiece height: 60mm Max edge banding thickness (roll): 3mm Feed rate: 10 m/min Original working distance: 30,000 meters, in my opinion the technical condition is very good Year: 2023 Possibility to inspect and test on site

Condition: ready for operation (used), functionality: fully functional, power: 7.35 kW (9.99 HP), 2-speed (Vario) feed gearbox 4-spindle thickness table guide Electric thickness table adjustment Pedpsyzc Efefx Am Topw

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Podpfx Ameyzdnbe Topw Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: good (used), Year of construction: 2017, functionality: fully functional, operating hours: 130 h, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Workpiece height: 10–45 mm Pedpsyfvhajfx Am Topw Chain feed with 8 m/min Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Teflon-coated glue pot, 1.2 kg capacity, with glue roller End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Additional equipment: Surface scraper, mechanically engageable Radius scraper knife

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 432.08.202.22, drilling depth: 70 mm, input voltage: 400 V, pressure: 8 bar, input frequency: 50 Hz, power: 1.5 kW (2.04 HP), The FD 921 is equipped with 21 drilling spindles set at a 32 mm pitch. Drill bits up to a diameter of 35 mm can be used for drilling dowel holes, line bore holes, and cup hinges. The large cast iron table, side stops, pneumatic workpiece clamps, and ergonomic controls make the FD 921 a premium dowel boring machine. Further technical data: Number of drill heads: 21 (11 right-hand, 10 left-hand rotation) Ppjdpfxeyf A N De Am Tsw Axis distance between drill heads: 32 mm Max. workpiece size: 850x3000 mm Max. workpiece height: 65 mm Required air pressure: 6-8 bar Accessories: - 11 tool holders with 5 mm right-hand dowel drill bits - 10 tool holders with 5 mm left-hand dowel drill bits - Positioning system for side stop with 8 stops - Additional pneumatic clamps - Mitre stop for FD 21 - Bracket for side stops and further accessories - Gauge for transferring the position of the cast stops - Coupling system for table extension

Condition: like new (used), Year of construction: 2024, For sale is a used Felder RL-300 clean air extraction unit with a maximum air flow rate of 6,000 m³/h. The extraction unit is in very good condition and has been inspected and refurbished by our qualified staff. Technical Data: - Extraction capacity: 6,000 m³/h - Maximum negative pressure: 2,450 Pa - Extraction connection diameter: 300 mm - Chip collection volume: 2 x 210 liters - Dimensions: 3,015 x 970 x 2,280 mm (L x W x H) - Automatic fire extinguishing system with powder extinguisher Pjdpfxexdlwmj Am Topw - Steel impeller - Motor power: 8.2 kW - Year of manufacture: 2024 The clean air extraction unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air extraction unit, clean air, RL Reference: R-S1522

Condition: like new (used), Year of construction: 2024, For sale: Felder RL-160 clean air extraction unit with a maximum air volume flow of 3,200 m³/h. The extraction unit is currently in use as a demonstration model in our showroom and is therefore in as-new condition. Technical data: - Max. air volume flow: 3,200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Manual filter cleaning - H3 dust-tested - Year of manufacture: 2024 Ppsdpfx Aeyh Ai Hsm Tsw The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Sale subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: as good as new (ex-display), functionality: fully functional, Demonstration machine For sale is our Felder RL-140 clean air extraction unit from our showroom, with a maximum air volume flow of 2,500 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical data: - H3 dust-tested - Extraction connection diameter: 140 mm - Extraction can be configured for right or left side - Manual chip shaker - 10 m² filter area - Max. air volume flow: 2,500 m³/h - Minimal footprint: 1,040 x 898 x 1,940 mm (L x W x H) The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Ppjdexdkw Espfx Am Tsw Reference: R-A0117

Condition: as good as new (ex-display), Exhibition Machine For sale is our Felder RL-200 clean air extraction unit from our showroom, with a maximum air flow of 4,000 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical Data: - H3 dust-tested - Extraction connection diameter: 200 mm - Extraction possible on both right and left sides - Automatic chip shaker - Steel impeller Podpsxdkzqofx Am Topw - Max. air flow 4,000 m³/h - Minimal space requirement: 1,775 x 898 x 2,005 mm (L x W x H) - Year of manufacture: 2022 - Machine No.: 31.04.114.22 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-L0CE0

Condition: like new (used), DEMONSTRATION MACHINE For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Technical data: - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Podpexxi T Ujfx Am Topw Related terms: dowel milling machine, drilling machine, line boring Reference: R-A0117

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a Felder RL-160 clean air extraction unit with a maximum air flow rate of 3,200 m³/h. The extraction unit is in excellent condition and has been inspected and serviced by our specialists. (Fully functional) Technical data: Ppjdpfxowp Rgms Am Tjw - Max. air flow rate: 3,200 m³/h - Filter surface: 10 m² - Extraction connection Ø: 160 mm - Manual filter cleaning - H3 dust tested - Year of manufacture: 2020 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: used, machine/vehicle number: G-ADHM118054aR, AD planer Hammer A3-41, year of manufacture 2019, very good condition, including reversible blade and chassis, 4 kW, 1800 mm table length, 410 mm table width, 3 blades, 350 kg Prices subject to change, errors, printing and typesetting errors reserved Podpfsvw Ebpox Am Topw

Condition: used, AD planer Hammer A3, year 2018, in very good condition, hardly used, 310mm planing width, incl. 1 set of spare knives (reversible knives), 3 kW, 3 knives, 300 kg Subject to price changes, errors, and misprints. Pjdpfx Aewzzfksm Topw

Condition: used, AD planer Felder AD741, very good condition, year of manufacture 2003, 4 kW S6, 400 V, 410 mm table length, 2000 mm table width, 4 knives, approx. 400 kg Prices subject to change, errors, printing and typesetting errors reserved Pjdpfxjvrvkds Am Topw