Used Filling for sale (3,344)

Condition: used, Year of construction: 2018, Overview  This fill level and closure inspection machine was manufactured in 2010 by German company KHS. The operation view will be done with the label inspection machine from Indspect. It is designed for checking the fill height, closure and label of full bottles. The machine was running until January 2025 and is now stored in the company. Technical data Capacity: up to 25,000 bph Scope of Delivery  Fill level and closure inspection system | KHS Label inspection system | Indspect Rsdpfx Ajwhw Sgel Ijt

Condition: used, Year of construction: 2019, Overview  This fill level inspection machine was manufactured in 2019 by German company HEUFT. It is designed for checking the fill height and closure of full bottles. The system is available immediately and still installed. A personal inspection is possible on site. Technical data Capacity: up to 72,000 bph Formats: 75 cl Inspection features: Fill level and cap control Scope of Delivery  Fill level inspection system | HEUFT | PRIME | 2019 Reject system | HEUFT | DELTA-FW | 2019 Bottle conveyor (10 meters) Rodpfxewfq Nto Al Ist

Condition: used, Year of construction: 2013, Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle formats: Our service: send us your requirements and we will check the possibility of processing your bottle format. Cap formats: Screw caps, press-on caps, spray pumps with riser pipes   Our service: send us your requirements and we will check the possibility of processing your cap format. Capacity: Unscrambler: max. 6.000/h Filling machine: max. 5.000/h Rotary capping: max. 5.000/h The output depends on the container and cap geometries and the filling product.    1. Bottle Unscrambler BREITNER BFC 8002 Operation: continuous from supply bin Bin volume / drum Ø: 1.4 m³ / 1500 mm Working height: 900 mm, left → right Material / Housing: AISI 304 stainless steel + plexiglass Safety: door switches, overload protection Power / Air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar Container size: round Ø ≤100 mm × 250 mm, larger on request Feature: blow-cleaning station with ionized air and dust extraction 2. Filling Machine BREITNER MDL 2086 Filling: mass flow, 8 stations (expandable to 12) Filling range: 100 – 2000 ml/g, up to 5,000 bottles/h Working height / direction: 900 mm, left → right Product-contact parts: AISI 316, food-grade hoses, VITON seals Tank / Pressure: 100 L, 5 bar Power / Air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar Container size: H 50–350 mm, Ø/width 50–80 mm, various shapes CIP cleaning: 8 cleaning cups, automatic spray & drain, multi-step program Extras: laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capping Machine BREITNER SRT 5044 Operation: continuous rotary, 4 capping stations Output: up to 5,000 containers/h Container size: Ø ≤100 mm, H ≤300 mm Working height / direction: 900 mm, left → right Drive / Tools: servo motor, 0,3-3,5 Nm; BREITNER capping tools Power / Air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar Control: B&R controller, touchscreen, 200 format memories, password-protected Safety & inspection: door switches, overload, “No bottle – no closure,” optical cap check, reject system Extras: servo vertical movement, torque monitoring, fan-based cap feed, vibratory sorter VIB 8001, cap supply SFB 8001 Rjdexqzmwspfx Al Iet

Condition: used, Year of construction: 2003, Overview This 5 Gallon Water Bottling filler was built in 2003 with proven technology by American manufacturer Steelhead. The machine is already dismantled, in storage and can be viewed in person. Techn. Details Capacity: 600 bph Rjdpfx Astw Ip Tsl Ijt

Condition: used, Year of construction: 2009, Overview This KEG bottling unit Micromat 2/2-b was built by M+F KEG Technik in 2009. It is composed of a KEG washer and KEG filler. Until dismantling it was used in a brewery in Belgium. Technical details  Capacity: 20- 35 keg/h KEG type: 20l/30l DIN and EURO Fitting type: Typ S Station 1: Interior cleaning Station 2: Rinsing, sterilization and filling Semi automatic system with intergrated CIP, CIP tank at the back of the installation Dimensions  Length: 1,100 mm Width: 1,300 mm  Height: 2,200 mm +/- 50 mm  Electrical connection Voltage: 230/ 400 V, 50 Hz, 3 phases Connected load: 0,5 kW (without tank pumps)  Rsdjxrfcxjpfx Al Iot

Condition: used, Year of construction: 2014, Overview  This fill level and closure inspection unit was manufactured in 2014 by the German company Krones AG. The Krones Checkmat 731 was used for overfill and underfill detection based on high-frequency (HF) measurement as well as closure control for metal caps via sensor technology integrated into the filler. The system was recently dismantled in full working condition after being replaced by a newer camera-based inspection system. All peripheral components such as trigger light barriers, encoder, and pusher were properly disconnected and are included in the delivery. Technical data Inspection functions: Overfill and underfill detection using HF (high-frequency) method Closure control via integrated sensor for metal caps (mounted in filler) Condition: Excellent, fully functional before dismantling Status: Dismantled and stored, ready for shipment Application: Bottling lines for beverages with metal closures Included components: Trigger sensors, encoder, and pusher Redpfsyb Sk Nox Al Ist

Condition: used, Year of construction: 2019, Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt Rodpfxsl Hxnij Al Iet

Condition: used, Year of construction: 2007, Overview  The filling line for gable top packaging was manufactured in 2008 by the Norwegian company Elopak. It consists of a carton filler, cap applicator, and packer. The filling line is still installed, but no longer connected. However, it can be inspected in person. Technical Details  Capacity: 8,000 cartons/ h Formats: 0,5l 0,75l 1,0l Operating hours: 32,500 Scope of Delivery  Aseptic Carton Filler | Elopak | S-PS80HA | 2008 3x Cap Applicator | Elopak | PLA-S30 | 2009 Tray Packer | OYSTAR A+F | Traypacker TF | 2011 Rjdpfjty Ddxjx Al Ijt

Condition: ready for operation (used), Year of construction: 2002, A flexible CNC filling system Rationator for liquid filling is available. Dosing principle: volumetric piston dosing, filling positions: 10, design: 2-phase filling, products: liquids/lotions/emulsions/cosmetic products/chemicals, filling range: 20ml-1000ml, total system length: approx. 7800mm, total system height: approx. 1650mm. Including conveyor belt and transfer station. Documentation available. An on-site inspection is possible. Expected to be available starting mid-June 2026. Redpfxoyugmro Al Iot

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine with Zodiac HS screen Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Serial - 1013. ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). Rsdpfx Aexd Ubnjl Iot ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Note 🗒️ No printer.

Condition: ready for operation (used), - Diameter range: 45–100 mm - Height range: 20–115 mm - Production capacity: up to 60–120 cpm Redjvy Tvmopfx Al Iot Several can sizes / formats available.

Condition: excellent (used), Auto pot filling and sealing machine direct from closed soup filling line. Can be supplied with Apple depositors (at extra cost) which were running with it. Redpfx Aeuzv Dtol Ist

Condition: used, Year of construction: 1997, Automatic in-line filling machine: Model: Bosch FLK 6040 CIP Year : 1997 Power: 5 kW Speed: 30-40 bottles/min Conveyor width: 8 cm Transporting bottles from right to left Linear dosing system with 6 stainless steel pistons Filling point: 6 heads Plunger filling head: yes Volume: from 15 to 500 ml Rjdpfx Aleyfw H Ro Ijt Pistons replaced in 2012. Filling accuracy: +/- 0.5% depending on the product Product: liquid/semi-liquid for bottles, flasks, cans Formats : ⌀ 41 to 115 mm Hauteur max : 320 mm Minimum internal diameter of opening: 5 mm Closed hopper Clean-in-place (CIP) module Maximum temperature: 60°C Dimension : 400 x 150 x 320 cm Weight : 2100 kg Several formats and spare parts available.   Capping/screwing machine: Model : VLM 7010 Year : 1997 Power : 10 kW Transporting bottles by conveyor belt. Direction from right to left. Screw, pressure or push-fit sealing system Capacity : 60 units / min Bottle dimensions: Width: 16 to 90 mm Length: 16 to 135 mm Height: 40 to 280 mm Diameter: 16 to 100 mm Cap dimensions: screw cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length: 16 to 60 mm pressure cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length : 16 à 70 mm Machine dimensions: 400 x 130 x 200 cm (+ electrical cabinet 160 x 50 x 170 cm) Weight : 2050 kg  

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, total width: 1,340 mm, total length: 8,600 mm, total height: 1,990 mm, overall weight: 2,000 kg, Equipment: documentation/manual, Horizontal forming and liquid filling packaging machine for Doy-pack pouches with handle and welded plastic spout, intended for liquids. Complete with buffer tank and liquid pump, plastic cap feeder, and cap conveyor. Operating manual and control panel available in Polish and English. Specification: Rodpfx Aloyq Rrdj Iot Doypack packaging parameters: - Maximum pouch dimensions: 240 mm (width) x 310 mm (height) x 45 mm (depth) - Minimum pouch dimensions: 120 mm (width) x 140 mm (height) x 20 mm (depth) - Maximum filling volume: 1000 ml - Packaging speed: 50 pouches/min - Maximum diameter of film reel: 400 mm - Film reel core diameter (internal): 70–80 mm - Power consumption: 7–9 kW - Compressed air consumption: 0.4 m³/min - Net weight: approx. 2000 kg - Machine dimensions: 8600 mm (L) x 1340 mm (W) x 1990 mm (H) (excluding dosing units) - Voltage: 380 V ± 20 V (three-phase power supply)

Condition: good (used), Year of construction: 2000, GRUNWALD HITTPAC AKH-019R/! Item: GRUNWALD Hittpac AKH-019R/1 Grunwald-Cup Filling Machine various, margarine, sous, butter, cheese etc.. Grunwald Rotary cup filling machine with 2 heads, for round cups Year of production: 2000 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Rsdpfxop R R Dwe Al Ijt Stainless steel control panel, hanging on the machine, and operator panel. Machine has polycarbonate glass safety guards. CEE machine, incl. documentation Stationed: Denmark

Condition: good (used), Rarely available, Toyo Jidoki pouch machine direct from recently closed manufacturer of sauces, stocks and soups. Was filling these products into stand up retortable pouches. Bought new in 2007. Rjdsqudivjpfx Al Iot

Condition: good (used), Machine has been filling jams, honey, sweet mincemeat into plastic catering size tubs. Was then feeding into two separate lidding lines which can be available separately. Rodpfxerdzbts Al Ist

Condition: good (used), Handtmann VF628 vacuum filler with PVLS143 high speed linker cutter from 2021 and GS300 auto tray loading system consisting of GM310 and ZB311. Rarely available. We can offer an additional similar setup with VF622 instead of VF628. Rsdpjvvxumsfx Al Ijt

Condition: good (used), GEA Aquarius CX360 bagging machine direct from salad packing line. Nice condition. Rsdpfx Aewztmtel Ijt

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002567 The Mettler Toledo InPro 3253/120/PT1000 is a high‑performance in‑line pH sensor / electrode with some specific featuresA pre‑pressurized, liquid‑filled, low‑maintenance pH sensor. It has a built‑in PT1000 temperature sensor for temperature compensation. The sensor length (shaft) is 120 mm, which is relatively short, making it suitable for installations with limited insertion depth. It is sterilizable/autoclavable and optimized for steam sterilization or autoclaving cycles. That means it can withstand repeated sterilization without losing performance. Reference system: pre‑pressurized liquid electrolyte, with a ceramic diaphragm, and includes an Argenthal cartridge with a silver‑ion trap (for better performance in environments with sulfides etc.) Redpjxv Dv Ejfx Al Iet It can handle pressures up to 4 bar gauge and works in the range 0 °C to 100 °C. It has process connection thread of Pg 13.5, and its connector is of “VP” type This sensor would be used in settings where real‑time, reliable pH measurement is needed under harsh or demanding conditions. Some examples: - Biopharmaceutical / biotechnology production, e.g. fermenters, bioreactors, where sterilisation (e.g. steam) is frequent and you need accurate pH control. - Hygienic food or beverage processing where cleaning and sanitisation/sterilisation are done in‑place (CIP / SIP). - Chemical processing, especially where pH may swing extreme and environment may be harsh (high/low pH, temperature, maybe some contaminants). - Water/wastewater treatment in situations needing durable, robust probe

Condition: excellent (used), Year of construction: 2003, Haver & Boecker SWA/MECII-20 Loading device  Haver & Boecker SWA/MECII-20 Loose loading device with scale for loading trucks or wagons with bulk material Suitable for free-flowing, non-dusty bulk materials  Description Brand: Haver & Boecker Type: SWA/MECII-20 Year: 2003 Temperature limits: -10 ° C / 40 ° C Voltage: 230V Frequency: 50 Hz Pneumatic pressure: 5 bar; Max 40 kg Min 10 kg Dimensions: Section I L2.43 x W187 x H310 Section II L240 x B240 x H310 Haver Nettowage with rack Weighing and evaluation electronics MEC II-20 for control of weighing and/or machine functions Advantages Rjdpfx Aljg Sfa Ts Ijt - high operating comfort - easy programmability - PTB and OIML approval - 99 product type memories - Operator guidance via plain text display in 6 selectable languages BT 15 operating terminal For automatic remote product type adjustment,  incl. motorised adjustment of bag length/width parameters. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2010, operating hours: 47,000 h, machine/vehicle number: LC582, Used Complete Krones CSD PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones CSD PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across carbonated soft drinks, cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET. Technical Specifications & Performance Data Manufacturer: Krones and GEA Year of manufacture: 2010 Working hours: approx. 47,000 Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 L) Products handled: carbonated soft drinks, cider, sparkling water, still water, juices with CO2 Filling technology: Ultra-clean, isobaric, volumetric PET filling Current product: Apple juice with water and CO2 Neck finishes: PCO 1810, PSO 28 mm, 1810/1881 short neck Controls: Siemens Simatic S7 PLC platform Main Equipment Scope CIP: Krones VarioClean F AUT fully automatic CIP system, 4 x 5000 L, 30 m³/h Process: GEA TDS plant with flash pasteurizer, mixer, carbonator, degasser and process tanks Preforms: Preform tipper/kipper and feeding conveyors; Krones Contifeed RS preform feeding system; Prejet Linear preform cleaning unit Caps: Cassner cap feeding with cap rinsing and sterilization Blow molder: Krones Contiform S12M, directly connected to the ultra-clean bloc (no air conveyor) Rsdpfx Asyhbmtol Iet Filler/Capper bloc: Krones Volumetric VODM-PET 2.160-66-103 with integrated capper; Krones Vario Dos filler-bloc cleaning Coding and inspection: Domino DDC 3 laser coder; Krones Checkmat 731 FM-X+L filling level inspector; Krones Checkmat 731 EM label inspector Conveying and testing: SYNCO bottle conveyors; Krones Flowliner bottle leak tester Labeller: Krones Contiroll OPP 720-15, double roll-feed wrap-around labels with hot glue Secondary packaging: Krones VarioPro FS shrink–tray packer; Krones Multico S packet conveyors; Twin Pack handle applicator Pack coding: Leisinger Jet 3 ink coder Palletizing: Krones Robopox Modulpal (2016) Advanced Automation & Control Systems Line Control & PLC Siemens Simatic S7-series PLC for coordinated line control, interlocks and diagnostics Integrated filler-bloc cleaning via Krones Vario Dos for validated ultra-clean cycles Recipe and parameter management supporting fast changeovers between PET formats Quality Assurance & Traceability Laser date coding (Domino DDC 3) on primary packaging; inkjet coding (Leisinger Jet 3) on packs In-line inspection with Krones Checkmat systems for fill level and label presence/position Leak detection via Krones Flowliner for container integrity Production Line Integration Capabilities Upstream (Preforms to Bottles) Automated preform handling: tipper, conveyors and Krones Contifeed RS for steady feed Preform cleaning (Prejet Linear) to protect blowing ...

Condition: used, Year of construction: 2008, operating hours: 34,590 h, machine/vehicle number: R81, Used Aseptic Filling Machine Tetra Pak A3/Flex 150V TBA 1000B – Overview This second hand Tetra Pak A3/Flex 150V TBA 1000B is a proven aseptic carton filler engineered for industrial packaging and beverage production. Configured for Tetra Brik Aseptic 1000 ml (Base) packs, it delivers reliable, continuous operation for UHT milk, juices, and other shelf-stable beverages. With a nominal capacity of approximately 7,000 packs/hour, this used bottling line component combines high throughput with aseptic integrity for modern carton packaging. Technical Specifications & Performance Data Manufacturer: Tetra Pak Model: A3/Flex 150V TBA 1000B Redpfx Aex H Thujl Ijt Year of manufacture: 2008 Filling type: Aseptic (non-isobaric carton filling) Package format: Tetra Brik Aseptic 1000 ml (Base) Nominal speed: ≈ 7,000 packs/hour Working hours: ≈ 30,000 hours Utilities Electrical: 400 V, 50 Hz, 3-phase Installed power: up to ≈ 50 kW (typ. 35–50 kW depending on configuration) Compressed air: 6–8 bar, ≈ 300–500 Nl/min Water/steam: ≈ 0.5–1.0 m³/h (for processing/sterilization utilities) Dimensions & Weight Approximate footprint (L × W × H): 7 × 3 × 4.5 m Approximate weight: ≈ 7,000 kg (model range 6,000–8,000 kg) Note: Technical values are indicative for this A3/Flex configuration and should be confirmed during inspection/FAT. Advanced Automation & Control Systems The A3/Flex platform features OEM PLC-based control with a touchscreen HMI for recipe handling, alarms, and diagnostics. Motion control synchronizes forming, filling, and sealing cycles to maintain aseptic integrity and packaging quality at high speeds. Typical capabilities include: Recipe management for UHT milk, juices, and beverage variants Integrated process supervision and event/alarm logs I/O provisions for upstream/downstream line devices Recommended verification prior to start-up: PLC functions, valve actuation, pump performance, and seal integrity Production Line Integration Capabilities This aseptic carton filler integrates efficiently within a used bottling line or new beverage production layout: Upstream: packaging material feed and sterilization modules as per OEM design Downstream: conveyors to accumulation, straw/cap applicators, case packers, palletizers Utilities/process: interfaces for CIP/SIP connection to plant systems, sterile air, water, and steam Controls: standard digital/analog I/O and fieldbus-ready architecture depending on configuration Ideal for second hand industrial packaging projects requiring aseptic carton formats and stable high-speed operation. Machine Condition & Maintenance History Condition: used, currently in storage Approximate machine hours: ≈ 30,000 Operational note: continuous production achievable with proper preventive maintenance Recommended checks before commissioning: pumps, aseptic valves, PLC functionality, elastomers and seals Routine inspection, replacement of wear parts, and validation of aseptic barriers are advised prior to restart. Operational Performance & Versatility Product scope: UHT milk, juice, and shelf-stable beverages

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, New filling machine / dosing machine, suitable for filling a variety of liquids. Examples include: - Milk - Water - Alcohol - Disinfectants - Etc. Rederivxcjpfx Al Iot This is a robust machine that operates on compressed air and 220V, Plug and Play! It is ideally suited for filling small batches. Only a very small air compressor is required to operate the machine; if desired, this can be supplied as well. We recommend at least a 12L compressor. The filling machine is equipped with a 1000ml cylinder, allowing it to dispense a maximum of 1000ml per stroke. For larger volumes, multiple strokes can be programmed. For example, 2500ml can be easily filled in 2 x 1250ml. The minimum dosage per stroke is 100ml; any volume between 100 and 1000ml can be filled in a single stroke. We also offer models with cylinders up to 5000ml per stroke. The unit comes with a suction hose, enabling direct suction from a barrel or IBC container. The machine features a foot pedal and an automatic mode. In automatic mode, the machine will continuously fill, making it simple and fast to handle larger quantities. The foot pedal allows for manual filling at your own pace. Depending on the operator and the volume per fill, between 15 and 25 units per minute can be filled, making this a very fast machine. The machine weighs approximately 15-20kg and can be conveniently placed on a table. Entirely constructed from stainless steel, it is a very high-quality, industrial-grade machine. For questions, please feel free to email; we are happy to assist with this or another machine. We also supply a labelling machine which is a perfect match for the filler. We strive to respond to your inquiries within 24 hours. Of course, we are also available by phone. Our office hours are Monday to Friday, 09:00–17:00.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: DC, warranty duration: 24 months, compressed air connection: 2 bar, overall weight: 20 kg, filling weight (max.): 1,000 g, filling weight (min.): 100 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: new filling machine suitable for dispensing liquids, pastes, and semi-viscous products, such as: - Disinfectants - Shampoos & lotions - Creams - Honey & jam - Milk & yoghurt - Water & alcohol - Sauces (e.g., pesto) - Etc. Simple, reliable, and immediately deployable This filling machine operates on compressed air and 220V and is fully plug & play. As a result, the machine is very user-friendly and particularly suitable for filling small to medium-sized batches. A small compressor is sufficient to run the machine; one can be supplied if desired. Flexible filling (100 – 1000 ml) The machine is equipped with a 1000 ml cylinder, allowing for a maximum of 1000 ml to be filled per cycle. - Minimum fill quantity: 100 ml - Any quantity between 100 and 1000 ml can be dispensed in a single stroke - Larger volumes can easily be achieved by multiple cycles Large hopper & expansion options Standard supplied with a 30-liter stainless steel hopper. There is also the option to connect to an IBC container or 200-liter drum, enabling quick and efficient handling of larger filling volumes. Manual or automatic operation The machine offers: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher volumes Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Compact & high-quality construction - Weight: approx. 15–20 kg - Easy to place on a table - Fully made of high-grade stainless steel - Robust, industrial build quality Rodpfx Ajrivwfol Iet More information For questions, feel free to email us; we are happy to assist you with this or other machines. Additionally, we also offer a labeling machine, which is an excellent combination with this filling machine for a complete filling solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.