Used Finger Jointing for sale (2,453)

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Iedpew Uf Tkjfx Ag Nobc Individual components can also be sold as spare parts.

Condition: excellent (used), Year of construction: 2011, Famad HSKG 6m frame press Technical data: Isdpfx Ageukg Dze Nsbc Maximum workpiece dimensions: length up to 6050 mm, width up to 160 mm Total weight of the machine: 4800 kg

Condition: ready for operation (used), -packet-jointing line -for timber infeed 900-5.100 mm -double-roller conveyor -cut saw with marking recognition 15 KW -packaged -finger jointing milling automate 80 KW -singling cross conveyor -roller conveyor -cycle press hydraulic 20 KW -automatic under table circular saw 5 KW -wood widths of 70 - 255 mm Ijdsbqqzgspfx Ag Nsbc -wood thickness from 22 to 140 mm -wood input from 900 to 5100 mm -pressing force 12 tons -capacity from 7.000 to 10.000 meters / 8 h -options example cycle press 25 to or 40 to

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Grecon Ultra microstrip line - German production - year of production 2001 - for soft and hard wood - DTR TECHNICAL PARAMETERS: length of elements min/max 150/1000 mm width of elements min/max 40/205 mm height min/max 20x80 ratio min length / max width 2:1 initial length min/max 3000/6100 mm power of disc engine 5,5 kW blade spindle diameter 30 mm Iodpfx Asrf Ty Sjg Njbc milling cutter motor power 22 kW spindle diameter 50 mm total length 11500 mm width 5300 mm total power consumption 39 kW air pressure 8 bar air consumption 660 NL/min nozzle diameter 250 and 100 mm extraction demand 6150 m3/h 30m/s transport dimensions 1300 cm x 220 cm x 200 cm weight 6700 kg

Condition: used, knife: Reversible blade Z6 flight circle (ø): 100 mm drilling: 30 mm length: 55 mm Iodpfx Aowu Nypjg Njbc material: steel Labelling: MEC

Condition: used, functionality: fully functional, pressing force: 200 t, table width: 300 mm, cutting height with scoring (max.): 100 mm, milling spindle length: 250 mm, Equipment: 1 GRECON feed transfer with accumulation of 4 to 5 cleaned lamellas of different lengths for finger-jointing 1 GRECON double finger-jointer for deep teeth (for glulam beam production) Ijdpfx Aswz H Aneg Nsbc 1 180° transfer with two-component gluing system 1 GRECON finger-jointing press 1 CNC-controlled cross-cut saw 1 outfeed table

Condition: good (used), Year of construction: 2010, functionality: fully functional, Keilzinken Milling Machine WEINIG NKT Doppel-Pack DP20 An industrial finger jointing system - designed for maximum precision and efficiency Technical Specifications: - Wood infeed length: min. 130 mm | max. 1000 mm - Wood outfeed length: min. 3700 mm | max. 7400 mm - Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm - Cutter diameter: 370 mm - Finger joint profile: Vertical / Horizontal, 10/11 fingers, 3.8 mm pitch - Glue application: Double-sided, PVAC white glue - Connected load: 80 kW Iedpfew Stkfex Ag Nebc Note: The machine is currently dismantled and in stock at our premises. Inspection can be arranged by appointment. Scope of supply: - WEINIG NKT Doppel-Pack DP20 incl. control unit - Integrated glue station for double-sided application - Operating manual & documentation

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, The Grecon Combipact wood joining line, year of manufacture 2009, is an advanced system used in the woodworking industry, primarily for joining short lengths of wood into longer pieces using finger jointing. Thanks to this process, it is possible to use wood waste to produce full-value structural elements, such as in beams, scantlings and panels. Technical data: 1. initial length of the elements: - Minimum length: 150 mm - Maximum length: 1000 mm 2 Width of elements: - Minimum width: about 20-40 mm. - Maximum width: about 200 mm. 3. thickness of elements: - Minimum thickness: about 15-20 mm. - Maximum thickness: about 80 mm. 4. Final length after jointing: - Standard maximum length after jointing: from 6000 mm. 5 Capacity: - The production capacity is usually 5 to 15 joints per minute, which gives the ability to process up to 3000 mb/hour. 6. joint type: Iodpouiz I Refx Ag Nobc - Finger jointing, which is made with high precision, providing a durable and strong connection. 7. Press pressure: - Typically, a hydraulic press applies a pressure of several to several tons to effectively join the parts. 8 Control: - A PLC control system that provides process automation with the ability to set various parameters for joining wood. 9 Gluing: - Grecon Combipact lines are equipped with automated glue application systems that precisely dispense the correct amount of bonding agent. 10. power supply: - Standard power supply: 400 V, 50 Hz

Condition: used, Price on request. Comprising: Minda grading line for stack and lamella dimensions Stack width: max. 1,200 mm Stack height: max. 1,200 mm Stack length: 2,000–5,000 mm Stack weight: max. 3 t Lamella width: 80–260 mm Lamella thickness: 23–80 mm (typically 46 mm in the rack) Cross-section: max. 80 x 260 mm = 208 cm² Ibedpjwwg Amefx Ag Nsc Performance of vacuum stacking with lifting column: Section I: 3 layers/min Section II: 2 layers/min Finger jointing by Grecon Destacking, planing line and cross transfer platforms by Minda

Condition: used, Used machine Veneer jointing machine Machine number 1262050 Motor power 2.5 HP Engine speed 2810 rpm Cutting length 3100 mm Saw blade diameter 180 mm Rear support board missing Movable Transport dimensions approx. 3700 × 700 1450 mm Iedpfx Agewka I Ne Nobc Weight approx. 200 kg Availability: approx. end of July Location: Cologne

Condition: used, knife: WP Z2 Isdpfx Aewrrnwjg Njbc flight circle (ø): 125 mm drilling: 40 mm length: 30 mm material: steel

Condition: used, functionality: fully functional, Metering and application system Hydrotop 1 E400R + Ecotac_C for single-sided 1K PUR comb gluing for package finger jointing line. Glue application for finger joints. Adhesive application for finger joints. Ibodpfx Aeul Shneg Noc

Condition: ready for operation (used), Technical characteristics Gooseneck : 650 mm Veneer thickness : 0.4 to 2 mm Feed speed 9 m/min Total electrical power 0.18 kW (0.2 HP) Power and Motors Voltage: 220 V Ibjdjtx Hx Aspfx Ag Noc Pluging: Singlephased Power: 0,18 Kw Overall dimensions

Condition: excellent (used), operating hours: 10 h, functionality: fully functional, Grecon Dimter Ultra automatic wood joining line Ibjdsuddvaopfx Ag Noc Machine after major renovation. Specification: Tenner: Sawheadstock: - Spindle speed: 3000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling headstock: - Shank diameter: Ø50 mm - Usable shank length: 210 mm - Max. tool diameter: Ø250 mm-Ø150 mm - Spindle speed: 6000 rpm - Milling motor: 15 kW / 3000 rpm - Chip extraction: Ø150 mm Feed table: - Minimum board length: 150 mm - Maximum board length: 700 mm - Working feed: Steplessly adjustable Dust extraction: Chipper exhaust port diameter: Ø100 mm Mill exhaust nozzle diameter: Ø150 mm Dust extraction capacity (flow rate): ~2400 m3/h Pneumatic system: Working pressure: 6 bar Air requirement: ~2.5 m3/h at 6 bar (15 Nm3/h) CONTI M 6/6000 longitudinal wood joining press: Press: - Loaded strip width: 25 – 160 mm - Finished strip length: approx. 6000+15-50 mm - Pressing force: 3 – 7.5 T (3 000 – 7500 daN) Circular saw: - Saw diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3000 rpm Dust extraction: - Saw exhaust nozzle diameter: Ø100 mm - Dust extraction efficiency (flow rate): ~400 m3/h Pneumatic installation: - Working pressure: 6 bar - Air demand: ~2.5 m3/h at 6 bar (15 Nm3/h) Scope of renovation work: 1. Cleaning the machine bodies and applying new paint 2. Replacing with new bearings on: the main spindle of the tenoner; on the saw headstock of the press; linear bearings on the guide of the tenoner table carriage; bearings on the working belts. 3. Installing a new glue nozzle with a pitch of 3.8 mm on the tenoner body, installing a glue supply tank with a safety valve; 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic hoses for actuators, solenoid valves and other pneumatic elements in machines with new ones; 7. Replacement of gear wheels and double-row chain on the belt-chain feeder of the press. 8. Regeneration of electromagnetic brakes on the tenoning machine 9. Replacement of seals and O-rings (repair kits) in pneumatic actuators Replacement of worn solenoid valves with new ones. 10. Replacement of graphic panels on the tenoning machine cabinet, on the press cabinet, on the small press panel with new ones. 11. Replacement of buttons, lamps and switches on panels and control boxes with new ones. Replacement of boxes with connectors with new ones. 12. Replacement of controllers supervising the operation of the tenoning machine and press with new ones. Adjustment of the machine control program to the user's needs 13. Installation of a new inverter on the press rollers and on the pusher of the receiving table projector; 14. Maintenance of electrical installations in control cabinets, modernization and preparation of electrical diagrams. 15. Installation of covers, grids and necessary descriptions, stickers and health and safety signs as well as manufacturer's logos and nameplates. 16. Replacement of V-belts with new ones, checking pulleys; gear motors and engines; 17. Replacement of limit switches, inductive and optical sensors (photocells) with new ones. We specialize in wood joining machines. Installation, start-up and training of employees in the scope of machine operation in Poland included in the price, in other countries for an additional fee. We provide service and access to spare parts.

Year of construction: 1986, condition: used, - working length (mm): 3200 - drilling units: 3 from below with 3-spindle drilling head - Hold down: 2 from above - pressure cylinder: 1 from the side - control: Siemens of newer construction Ijdpj Drmxjfx Ag Nebc

Condition: used, Year of construction: 1995, Used machine Year of construction 1995 Ibodewi Adkopfx Ag Njc technical data: Working length: 3000 mm Handwheel tension Power unit 2 kW Availability: short term Location: Hesse

Condition: used, knife: WP Z2 flight circle (ø): 100 mm drilling: 30 mm Iedpfx Aet Starog Nebc width: 60 mm material: steel Replacement blades: On demand

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1650x1600 mm Iodpfx Agevz Hybj Nobc Weight 1300 kg Total power requirement 17,5 kw

Condition: ready for operation (used), Technical characteristics Feeding belt 600 x 1500 1 finger jointing unit with rotating table on mobile carriage with reference Milling and double gluing roller Package 600 mm Max height 180 mm Lengths of wood 200 to 1000 mm Automatic transfer and overturning of finger-jointed pieces Pre-forking station Hydraulic roller press Cutting Iodpettdnasfx Ag Njbc Max length of wood 4500 mm Right side discharge on table Power and Motors Pluging: Three-phased Overall dimensions

Condition: reconditioned (used), Year of construction: 2008, operating hours: 5 h, Automatic single-tenon line for connecting wooden elements to length. The presented machine configuration allows for maximum efficiency of up to 4000mb/shift. The use of a receiving table with automatic feeding of strips to the conveyor entering the PHSL press allows the line to be operated by a single employee feeding the elements. The line works in an automatic cycle with manual feeding of material. Year of production: 2008 Machine after renovation, in very good technical condition. Machine of Polish production. Technical data: Ibodpsrpa Apsfx Ag Nsc - Width of the milling-tenoning machine input package: 600mm - Width of glued elements: 40 ÷ 155mm - Length of glued elements: 170 ÷ 900mm - Thickness of glued elements: 20 ÷ 70mm - Working air pressure: 0.6MPa - Compressed air demand: 18m/h - Working efficiency: 1.5 cycles/min. - Length of glued element: 6600mm - Working voltage V AC: 3 x 400+ N + PE - Control voltage: 24V DC For an additional fee, the machine can be installed and started.

Condition: excellent (used), Corner jointing machine Anton System EVM 250 Ibjdpfjl Sklyex Ag Nec shipping EU ~300euro

Condition: used, knife: WP flight circle (ø): 125 mm drilling: 40 mm width: 60 mm material: steel Ibodpfx Agot Stbco Nec

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1650x1600 mm Weight 1300 kg Total power requirement 17,5 kw Iodpfx Agjvz Hx Rs Nsbc

Condition: used, knife: WP-Z2 flight circle (ø): 125 mm drilling: 30 mm width: 40 mm Ibodpfx Agst Stbis Nec material: steel

Condition: used, knife: Z4 Ijdelf I Hkspfx Ag Nebc * 125x20x35mm, * n max. 9,000 rpm, * MECH.