Used Finishing Line Flooring for sale (18,208)

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: 1x gravimetric ( loss-in-weight ) blending unit 5-Components SITECOM incl. control board 1x Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter Type K –HS- Y 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, find our most-recent stock-list Dusdpoh Eyd Aefx Apwst online on our homepage.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Dusdjd Sg Hrepfx Apwet Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: reconditioned (used), machine/vehicle number: 2586k, No.: 2586k 1 used, functionally tested and operating compounding-pelletizing line, equipped with : Extruder twin-screw COMAC Type EBC 68 with Motor 110 kW-DC screws 2x Ø 68 mm – 40 L/D co-rotating intermeshing Segmented screws & cylinders, Water / Medium cooled 1x venting port 1x side feeder screws 2x Ø 52 mm Melt-filter 2 piston Type K-SWE 160 incl. Hydraulic-pack BKG underwater-pelletizing unit Type AH 2000, complete with: diverter-valve / Hydraulic pelletizer with motor 4 kW incl. die-plate and knife-holder Dusdpfx Aed H S U Uspwot Water – Box TWS volume 900 liter, heating power 40 kW Installed Water pump with 11 kW, By-Pass-System Pellet Spin-dryer TVE 2000 ED with motor 4 kW water sieve with circulation pump 4 kW Siemens S7 – Touch control board More extruders / recycling - and compounding lines ex our stock Wuppertal-Germany available, as: pelletizing systems, dosing & blending, screen-pack-changer, pellet classification, granulating and many more. Ask for our most recent stock-list or visit us in Wuppertal-Germany. You´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger Dsdpfjh Eyd Rex Apwsut BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW Dedpfx Apsi Dtb Uowjut control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW Dusdpfsgbffvjx Apwet 3x venting ports 1x Melt-Filter No. 1 type K –HS- Y sieve/Mesh 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Melt-Filter No. 2 type K-SWE 180 RS back-flush self-cleaning 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, > find our most-recent stock-list online on our homepage.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 500 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port ( vacuum-pump optional ) Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW pellet classifier sieve control-board and Siemens Touch operation panel (updated ) OPTIONAL against additional price ᐳ * Vacuum pump ᐳ ,material feed conveying, Big-Bag filling Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome. Dedpod Sg I Ijfx Apwout

Condition: ready for operation (used), Year of construction: 2010, A modular bucket filling and lidding system Wittmann Robot Systeme is available. Components: bucket stack feeding, bucket stack transfer unit, bucket singulation, rake and filling, stopper, lid feeding, lidding, lid inspection and rotation for the further conveying processes. Number of formats: 6, format distribution round/rectangular, round bucket diameter: 226mm, round bucket height: 194mm, min. rectangular bucket dimensions X/Y/Z: 195mm/299mm/170mm, max. rectangular bucket dimensions X/Y/Z: 302mm/415mm/220mm, bucket volume: 5l/6l/10l/11l/16l. Including the corresponding conveyor units and motors. Documentation available. An on-site inspection is possible. Dusdpfxoy N Ddle Apwst

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Demonstration line, Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Duedpfx Apji Dtb Aswst Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: new, maximum load weight: 28,950 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 11,600 mm, loading space width: 2,480 mm, loading space height: 2,450 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, Brand new Knapen moving floor trailer K 200 A6070, 70.5 m³ * BPW axles * First axle with lift function, operated via switch in the driver's cab (the equipment for the SZUM is not included in the offer) * Air suspension * Disc brakes * ABS/EBS * OptiTire tire pressure monitoring system * Tire size 385/65 R22.5 * Gear support legs with sliding compensation * Plastic tool box * 6 mm floor, 21 planks * Subframe with full set of slide bearings * Stainless steel wear plate under the floor * Rear doors with double locking bars * One grain chute per door leaf * Radio remote control for floor, lift axle and auxiliary lamps * Manual sliding tarpaulin with side straps * 3-position tarpaulin supports * Multi-chamber LED lights * 1 pair of red LED lights on the rear brace Duodpfx Aey H Tltepwst * Side marker lights with indicator function * Reversing alarm * Air connection at the rear on the left * 6 additional reversing lights located on the landing gear supports, in front of the last axle and in the lamp carrier * Superstructure painted in RAL 7004 SIGNAL GREY * Chassis anodized * The photos show optional equipment not included in the offer price. * !!! THE TRAILER IS PAINTED IN RAL 7004 SIGNAL GREY !!!

Condition: new, maximum load weight: 29,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 11,600 mm, loading space width: 2,480 mm, loading space height: 2,450 mm, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, Brand-new Knapen Moving Floor Trailer K 200 A6070, 60 m³ * BPW axles * First axle as a lift axle, operated by switch in the driver’s cab * The equipment of the fifth wheel coupling is not included in the offer * Air suspension * Disc brakes * ABS/EBS * OptiTire tire pressure monitoring system * Tires: 385/65 R22.5 * Landing legs with thrust compensation Djdpfoy H Tlmex Apweut * Plastic storage box * 6 mm floor, 21 boards * Undercarriage with fully equipped sliding bearings * Stainless steel wear plate under the floor * Rear doors with double locking bars * Each door leaf with a grain chute * Radio remote control for floor, lift axle, and auxiliary headlights * Manual sliding tarpaulin with side straps * 3-position curtain supports * Multi-chamber LED taillights * 1 pair of red LED lights on the end profile * Side marker lights with indicator function * Reversing alarm * Air supply connection on the left rear * 6 additional reversing lights located at the landing legs, ahead of the last axle, and in the light holder * Body painted in RAL 7004 SIGNAL GREY * Chassis anodized * The photos show optional equipment not included in the offer price. * !!! THE TRAILER IS PAINTED IN RAL 7004 SIGNAL GREY !!!

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2025, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22,5, wheelbase: 9,060 mm, Year of construction: 2025, Axle configuration Tyre size: 385/65R22.5 Axle make: Knapen Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 80%; Tyre tread right: 80% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Weights Unladen weight: 8,070 kg Payload: 33,930 kg Gross Vehicle Weight (GVW): 42,000 kg Maintenance Dodpfxey Eylkj Apwsut APK (Main Technical Inspection) valid until 01/2027 Identification Registration number: OV-50-PG Further information Please contact Mark van der Steen for more information.

Condition: ready for operation (used), functionality: fully functional, The line will remain in operation until mid-July. The system consists of an X-ray machine (GreCon), cross-cut saw (GreCon), packaging unit, KZF, cross conveyor, and KZP (all GreCon). Duodpfjy N Uu Iex Apwot Achieved output: With an average board length of 3.74 m, output in 8 hours is approx. 10,000 linear metres of spruce. With an average board length of 2.43 m, output in 8 hours is approx. 7,000 linear metres of larch. Board widths: 90 mm / 160 mm and 110 mm Min: thickness 17 mm, width 70 mm Max: thickness 90 mm, width 270 mm

Year of construction: 2026, condition: new, functionality: fully functional, total length: 680 mm, total width: 600 mm, total height: 820 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 05/2027, type of input current: three-phase, warranty duration: 12 months, machine/vehicle number: 2026, Dishwasher Model: S-Line 3500 + 3-stage filter system Euronorm 500 3 liters of fresh water consumption Display control 6 washing programs Dujdpfx Apjfffhyowet 2 special (extra fresh water and endless loop) peristaltic rinse aid and detergent dosing pump extra deep interior for sheets / tubs 600 x 400 mm DGUV V3 checked Drain / drain pump electronically Connection: 400 V, 6.7 kW, 16A-CEE plug Dimensions: 600 x 680 x 820 mm, WxDxH with warranty Included accessories: 1 plate basket 1 universal basket 1 cutlery basket Inlet and outlet hoses

Condition: used, Bottling line with a capacity of 30,000 bph. 0.33 litre Vichy, 0.33 litre Euro and 0.5 litre NRW non-returnable bottles can be used. The line consists of the following machines/components: - New glass unscrambler Manufacturer: Steinle Fördertechnik - Beer preheater Manufacturer: Fischer - Bottle filler Manufacturer: Krones - Crown cork filling hopper with transport Manufacturer: Gassner - Bottle level control Manufacturer: Metec - Labeller Manufacturer: Krones/Renner - Labelling control Manufacturer: Miho - Bottle carrier labeller Manufacturer: DOKU-Consult Capacity: 30000 bottles/h Formats: 0,33l Vichy, 0,33l Euro and 0,5l NRW Dsdpfxjw Tmhao Apwsut Operation / Control: mainly Siemens S7 Position: free standing Features: New glass clearer; beer preheater; bottle filler; crown cap filling bunker with magnetic transport; bottle level control; labeler; label control; packer; full crate control; palletizing system Layer patterns: 4x8 boxes, 5 layers, on Euro pallet

Condition: used, Year of construction: 2019, Semi-automatic KEG system with two stations. Additional title: Keg cleaning and filling system Capacity: 30 KEG/h Power: 6 kW Current: max. 15,0 A Dodpfsw Uvdyox Apwjut Voltage: 400V AC Formats: 10 L, 15 L, 20 L, 30 L, 50 L KEGs, with flat fitting Running direction: left to right Operation / Control: Control box with touchpanel, Simatic S7-300 Material: stainless steel Position: free standing Features: 2 stations, CIP station with 2 tanks, KEG infeed and outfeed roller conveyors, control cabinet with touch panel

Condition: used, Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labeling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labeling stations - bottle transport Additional title: years of manufacture: 1975 - 1979 Capacity: 9000 bo/h Duodpsw Tmt Aefx Apwst Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate Features: empty bottle inspector; bottle filler and capper (28 filling valves and 7 capping heads); screw-capper; labelling machine; bottle transport

Condition: used, Year of construction: 2017, Filling line for 0.33 L disposable Euro bottles The bottles are placed by hand on a bottle loading table. From there they run on a conveyor belt to the labeling machine, where an all-round adhesive label is applied. Then they go to the combined rinser/filler/sealer, and downstream bottle collection table, from which the bottles are manually packed into crates or other containers. Additional title: Glass bottle filling Nominal capacity approx.: 3750 bottles/h Formats: 0.33 L disposable Euro- and Vichy-bottles Running direction: left -> right Dsdpfxswgi Dxs Apweut Operation / Control: Filler: Siemens ET 200 SP, Touch Panel Position: free standing Features: Bottle loading table, labeling machine from Intrex (model: Intrex Set with all-round adhesive labeling), bottle rinser/filler from Leibinger GmbH (rinser model: 12 BG, filler model: Multima L (=long-tube filler) control: Siemens S7, built in 2019), Bottle collection table, bottle transport

Condition: used, Bottling line for approx. 5000 bottles/h Dsdew S Tqfepfx Apwsut Additional title: years of manufacture: 1990 - 2016 Capacity: 5000 bo/h Formats: Eurobottle 0,5 l, Longneck 0,33 l , swing top 0,5 l Features: Empty bottle inspector (Heuft Reflexx InLine IR, 2016, 8,000 bph) Bottle filler and capper (Hormes), swing stopper capper (AMS, 1997, 15 capping units, 6,000 bph), Labeling machine (Gernep, 2014, 9000 bph), bottle transport

Condition: used, Disposable PET filling line consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in a 4x5 arrangement) for 0.5-litre bottles - Crate ejector for 1.0-litre bottles (Gera, 2003) - Case washer with cleaning nozzles - Stretch blow moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Suction system (2003) - Air transport (KHS Innoline, 2003) - Premix system (Procomac Starmix CM, built in 2001, 250 hl/h) consisting of water degassing, mixer and carbonation with a total of 4 containers - Velcorindo dosing (dmt, Burdomat II G) - Cap feeding and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler and capper (Procomac, 2001) - Labelling machine (P.E. Futura, 2001) for hot glue labelling of wrap-around labels, in block with laser dating (Videojet, 2017, with suction) and label box (2005) - Labelling machine (KHS Roland, 2009) - Best-before date detection device (2011) - Air knife blow-off system for bottles (2017) - CIP system (Procomac, 2001) with 3 tanks, each with a capacity of 20 hl - Free, powered conveyor lines for bottles and crates Additional title: non-returnable PET filling Capacity: 16000 bo/h Dodpfeyr N Utsx Apwout Formats: 0.5 litre disposable PET bottles, 20-bottle crates Features: Bottle ejector, crate washer, 2 x stretch blow moulding machines, premixer, Velcorindo dosing, cap feeding and conveying, rinser/filler/capper, labelling machine, date coding, packer, best before date detection device, bottle blowing, bottle air transport, suction system, CIP system, free crate and bottle transport

Condition: used, Year of construction: 2001, PET single-use filling line for water, soft drinks and fruit spritzers. Bottle formats: 0.5 L, 1.0 L, 1.5 L Nominal output: 24,000 bottles/hour (with 1.0 L) The new bottles are destacked on pallets at the new bottle unstacker and transported pneumatically to the rinser. The system consists of: - Markant 1ASH-PL new bottle unstacker Manufacturer: KHS Year of manufacture: 2001 - Pneumatic bottle transport Manufacturer: KHS Year of manufacture: 2001 - Premix system Intermix 240 EIÜD Manufacturer: Ortmann & Herbst Year of manufacture: 1978 with downstream Velcorin dosing - PET rinser: Innoclean FR-ZR 70/113, 1 B/RL Manufacturer: KHS Year of manufacture: 2001 With chlorine dioxide and sterile water rinsing - PET filler Innofill DRV-VF-PET Manufacturer: KHS Year of manufacture: 2001 With Alcoa screw capper and liquid nitrogen dosing - Fill level control Manufacturer: miho Year of manufacture: 1992 - Container transport Manufacturer: KHS Year of manufacture: 2001 - Labelling machine for wrap-around labels Manufacturer: KHS Year of manufacture: 2003 With hot melt glue melter and best-before date printer Duodpfxjxhd Ape Apwjt Features: New glass removal system; pneumatic bottle transport; premix; rinser/filler/capper; fill level control; container transport; labelling machine

Condition: used, Capacity: 50000 b/h Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, neck-/breast-/body-/back-labels, Euro pallets Operation / Control: Siemens S5 Duedpfevcqr Dox Apwet Features: decrowner, decrater, bottle washing machine, empty bottle inspector, bottle filler and closurer, filled height inspection, labelling machine, dating, label inspection, crown cork inspection, crater, filled crate inspection, bottle and crate conveyors

Condition: used, Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - De-capper: JOHA type Smaragt, built in 1990, with one unscrewing head - Bottle unpacker: JOHA type E100, built in 1978, with one packing head - Crate washer: JOHA type KA2N, built in 1983 - Bottle washer Pirzer, built in 1983, with 19 bottle racks per row - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labelling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labelling stations - Bottle packer: JOHA type A400 Q, built in 1977, with one packing head Additional title: Years of manufacture: 1975 - 1990 Capacity: 9000 bottles/h Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate Features: De-capper; de-crater; crate washer; bottle washing machine; empty bottle inspector; bottle filler and capper (28 filling valves and 7 capping heads); screw-capper; labelling machine; bottle crater Dedpfx Asvcq Avspwout

Condition: used, Year of construction: 2001, PET filling line from KHS Additional title: with palletising and depalletising Performance at 1 liter: 24000 bottles/h Formats: 0,5 L and 1 L bottles Features: Depalletizer, Air transport, Rinser, Filler incl. height control, Mixer, Packing, Crate washer, Palletizer Dsdpfx Aovu Tufopwsut

Condition: used, Reusable glass bottle filling line for mineral water and soft drinks, consisting of the following components: - Depalletising with pallet feeding (Schaefer, approx. 1989) - Unpacker (KHS with conversion by Paxona) - Crate washer for crate spraying - Unscrewing machine (Adelski) - Bottle cleaning machine (Krones, 2001) Single-end machine - Empty bottle inspector (Krones) with ejection and glass shredder - Glass bottle short tube filler (Krones, 2002) with cappers for crown caps and screw caps + cap inspection - Labelling machine (Krones, 2009) for cold glue labelling of paper labels + label inspection - Packer (KHS with conversion by Paxona) - Depalletising (Schaefer, approx. 1989) - Free transport for bottles and crates - CIP system with 3 containers - Premix system Translated with (free version) Additional title: Reusable line; years of manufacture approx. 1989-2012 Capacity: 11800 bo/h referring to 1.0 l bottles Formats: 0.33 l; 0.5 l; 0.8 l; 1.0 l; - Screw caps and crown caps Operation / Control: Krones Dujdpfeyxnd Ijx Apwst Features: pallet loading; depalletising; de-crater; crate washer; unscrewing machine; bottle cleaning machine; glass bottle filling and capping machine; cap inspection; labelling machine; label inspection; crater; palletising; free crate and bottle transport; CIP system; premix system