Used Fitting Center for sale (15,206)

Condition: good (used), Year of construction: 2009, XYZ: 1020 x 540 x 540mm, Table 1120 x 540mm, 15kW, Heidenhain tnc 530 , 10,000 rpm, Bjdpfexfvnrsx Aacjdi 24 station ATC, BT40 taper, low volt light, swarf conveyor, coolant.

Condition: used, Year of construction: 1998, x-travel 650 mm Bdodpfxsxtxlve Aacoi y-travel 560 mm z-travel 650 mm table surface area 400 x 400 mm control Fanuc 18i-M spindle turning speed range 120-12000 U/min ja/yes hand wheel type of pallet-changer 2 Cooling through the spindle 10 bar chip conveyor ja/yes feed 670 mm/min distance work spindle /surface of the table 800 mm table load 400 kg toolpiece magazine: chain magazine 80 BT 40 b-axis 360 1° rapid traverse: 40 m/min feed 1-40.000 mm/min tool changing time 1,3 sec tool/tool tool changing time 3,8 sec chip/chip total power requirement 22,4 kW weight of the machine ca. 10,5 t dimensions of the machine ca. 5 x 3,3 x 3 m (LBH) Machining centre - Horizontal Mitsubishi M-H4B, year of construction 1998, good ondition, regularly maintained.

Condition: used, Year of construction: 2006, x-travel 450 mm y-travel 330 mm z-travel 350 mm control Heidenhain iTNC 530 turning speeds 42.000 U/min tool taper HSK 40 E table surface area 470 x 400 mm T-slots 5 max. table load 500 kg Bsdsxrg Ddepfx Aacodi Number of working hours 51993 h spindle hours 13858 h total power requirement 15 kW In our opinion, the machine is in very good condition and can be condition and can be inspected by appointment. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 2000, operating hours: 7,487 h, functionality: fully functional, machine/vehicle number: 23MS0122, turning length: 492 mm, turning diameter: 290 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 580 mm, swing diameter over bed slide: 550 mm, controller model: Fanuc Series 18-T, TECHNICAL DETAILS Capacity Swing diameter over bed: 550 mm Swing diameter over cross slide: 390 mm Maximum turning diameter: 290 mm Maximum turning length: 492 mm Travel X-axis travel: 205 mm Z-axis travel: 580 mm C-axis: 360° (0.001° increment) Spindle Maximum main spindle speed: 4,500 rpm Maximum sub-spindle speed: 6,000 rpm Chuck diameter: main spindle 210 mm / sub-spindle 135 mm Spindle bore: main spindle 76 mm / sub-spindle 45 mm Driven Tools Speed range: 6,000 rpm Feed Rates Rapid traverse X-axis: 20,000 mm/min Rapid traverse Z-axis: 25,000 mm/min Bjdexrz Ukopfx Aacsdi Turret Number of tool stations: 12 MACHINE DETAILS Control: Fanuc Series 18-T Dimensions & Weight Dimensions (L x W x H): 3,320 x 1,700 x 1,740 mm Weight: 4,240 kg Operating Hours Cutting hours: 7,487 h Power-on hours: 62,730 h EQUIPMENT Chip conveyor Sub-spindle Driven tools Tool presetter Workpiece catcher Box with collets 5x additional driven tools Bar feeder

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Bodpfx Aajxrahcecedi Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: E21PI17058028274, This listing is for a Vario Cooking Center VCC 211+ from the premium manufacturer Rational. This VCC is the Plus version and includes the pressure cooking mode. It has undergone a comprehensive inspection in our in-house workshop and is fully functional, supplied with a 6-month warranty. Accessories can be purchased upon request. If desired, we can provide a demonstration video of the unit (frying pan) in operation. MSRP for the VCC 211+ with pressure function: €23,593 net. You will receive an invoice with VAT shown separately. Service: We are happy to arrange for a certified Rational service partner, master-level, within approximately 100 kilometres of our location (ZIP: 35418). Are you looking for a specific Rational model? Contact us – we have access to a wide range of used and new equipment. We are happy to advise you on all unit types, including SCC, CM, CMP, VCC, iVario, and iCombi Classic and Pro models. Our used equipment service for you: - 6-month warranty on all electrical components - High-quality branded units at fair prices - Professional refurbishment / inspection & expert cleaning - Tested & fully functional – or your money back - Flexible shipping or local pickup options - Expert advice before and after purchase - Provision of operating manuals, wiring diagrams & spare parts - Electrical safety testing in accordance with DGUV V3 The Vario Cooking Center MULTIFICIENCY® combines the functions of traditional cooking equipment such as range, griddle, fryer, tilting pan, and kettle in one. Additionally, the Plus version features a pressure cooking mode, enabling you to cook, fry, and deep-fry in the smallest of spaces, unattended, and always with perfect results. Technical data: - W x D x H: approx. 1164 x 914 x 1100 mm - Power supply: V: 400 / kW: 28 / Hz: 50 - Weight: approx. 223 kg - Serial number: E21PI17058028274 - Year of manufacture: 2017 Condition: pre-owned, tested and fully functional Further features: - Core temperature probe - Floor-standing unit with height-adjustable feet Bdjdpfxsxr Uvhe Aacei - Plus version including pressure mode - Vario Dose – integrated water inlet - Integrated water drainage - Autolift lifting and lowering mechanism - Burn protection - Unheated side panels - Vario Boost® heating system = 200 °C in 2.5 min - Integrated hose shower - For 100 – 300 meals - Usable capacity: 100 litres Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement

Condition: good (used), Year of construction: 2014, Traverses X Y Z: 850 x 550 x 510mm, Bsdpfx Aoxftdwsacodi table size 500 xx 400mm, workpiece weight 500kgs, A axis -120/+90 degrees, C axis 360 degrees, Spindle speed 10,000 rpm, Spindle taper BT40, 30 Station ATC, Matrix 2 Control, through spindle coolant, swarf conveyor

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle Bsdpfx Aovyli Eoacjdi very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders: 2x axial driven and numerous rigid tool holders 4x radiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 is without barloader. Loading magazine interface has been fitted.

Condition: used, DOOSAN S390L CNC LATHE MAKE DOOSAN, MADE IN KOREA MODEL S 390L, YEAR 2000 CONTROL FANUC 21T SWING OVER BED 580 mm MAX TURNING DIA 390 mm DISTANCE BETWEEN CENTRES 800 mm CHUCK DIA 300 mm SPINDLE BORE 89 mm SPINDLE NOSE A1-8 SPINDLE SPEED 3500 RPM SPINDLE MOTOR 30 HP TURRET 12 STATIONS, RAPIDS X: 24m/min Z: 30m/min Bdedpfxsxfa Ipo Aacei TAILSTOCK YES MACHINE DIMS L: 2800 mm W: 1880 mm H: 1800 mm MACHINE WEIGHT 5000 KGS PLUS TOOL SETTING PROBE COOLANT SYSTEM TURRET TOOLING

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1539000478E, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: Siemens Sinumerik 810D Powerline, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel in X-axis: 1,035 mm Travel in Y-axis: 560 mm Bodsxrzz Djpfx Aacodi Travel in Z-axis: 510 mm Table size: 1,200 mm x 560 mm Maximum workpiece weight: 1,000 kg Spindle speed: 10,000 rpm Tool holder: SK-40 Spindle motor power: 18.5 kW Tool magazine positions: 20 MACHINE DETAILS Control: Siemens Sinumerik 810D Powerline Dimensions & Weight Dimensions (L x W x H): 2,600 x 2,550 x 2,600 mm Weight: 5,500 kg

Condition: good (used), Year of construction: 2008, Control: FANUC Series 18i-TB Max bar diameter: 65 mm Max length: 250 mm Max turning diameter main spindle: 520 mm Max speed main and sub spindle: 4,000 rpm C-axis 2 turrets, each with 12 stations All stations are driven Driven tool speed: 4,000 rpm Chip conveyor Bar loader TOP-Automazione XF365 Bdedpfx Aasxq D Hmjcji

Condition: used, Year of construction: 2008, x-travel 2360 mm y-travel 600 mm z-travel 800 mm Bjdpjxtf Abefx Aacsdi Control Heidenhain ITNC 530 total power requirement 45 kW weight of the machine ca. 15 t dimensions of the machine ca. 3,7 x 3,5 x 3,3 m

Condition: excellent (used), Year of construction: 2017, High-Performance 5-Axis Machining Center POSMILL H800 U Year of manufacture: 2017 Operated in single-shift mode Large spindle cooler Bsdpfjxtnikex Aacsdi Full Heidenhain measuring systems installed on all axes Heidenhain 530 control unit Kessler spindle, 18,000 rpm Kessler rotary swiveling arm, swing diameter 800 mm, fully usable with zero-point clamping system New maintenance scheduled for April 2025, rotary union replaced (€8,600) ————— Technical Data: X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm (A-/C-axis) Swivel range approx. -100 to +120° and -120 to +120°, C-axis endlessly rotating 360° Table diameter: 800 mm Tool holder: HSK 63 Tool positions: 96

Condition: excellent (used), Year of construction: 2002, Great opportunity to buy a 5 axis vertical machining center HERMLE C800U in very good condition. The machine can be inspected under power upon appointment in Belgium and it is immediately available for delivery. Bdsdjxr Rk Ispfx Aacsi Including: Internal cooling Tool measuring probe Chip conveyor Optional: STARK clamping system ca. 60 pallets More info and videos available on request. Control Heidenhain iTNC 530 X-AXIS Movement 800 mm Y-AXIS Movement 600 mm Z-AXIS Movement 500 mm A-AXIS Movement +90° to -90° C-AXIS Movement 360° Type of tool holder SK40 Max spindle speed 16000 rpm NC swivel rotary table ø 280 Number of positions in tool magazine 87

Condition: used, Year of construction: 2015, HAAS SUPER MINI MILL VERTICAL MACHINING CENTRE MAKE HAAS, MADE IN USA MODEL SUPER MINI MILL YEAR 2015 Bdodoxfazpopfx Aacji CONTROL HAAS NEXT GENERATION TABLE SIZE 914.0 mm x 305.0 mm TRAVERSES (XYZ) X AXIS: 406.0 mm Y AXIS: 305.0 mm Z AXIS: 254.0 mm SPINDLE SPEED 10,000 RPM SPINDLE TAPER BT 40 ATC 10 PLUS HIGH SPEED SPINDLE COOLANT SYSTEM SPINDLE TOOLING FULL SET OF MANUALS FULLY FUNCTIONAL ONE PREVIOUS OWNER

Condition: ready for operation (used), Year of construction: 2009, operating hours: 51,610 h, functionality: fully functional, machine/vehicle number: 11580008963, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC 530, table width: 600 mm, table length: 1,000 mm, TECHNICAL DETAILS Travel X-axis: 730 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: +120° ~ -120° Table Table size: 1,000 mm x 600 mm Maximum workpiece weight: 800 kg Spindle Maximum spindle speed: 18,000 rpm Spindle taper: HSK-63 Spindle motor power: 19 kW Tool Magazine Number of tool stations: 60 MACHINE DETAILS Control: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 3,450 x 2,450 x 2,650 mm Weight: 8,000 kg Electrical data Bdjdpfoxrzt Hex Aacsi Apparent power: 49.7 kVA Maximum current draw: 72 A Rated current: 80 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Operating hours Machining hours: 51,610 h Control on hours: 115,006 h

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 09751 N00260, travel distance X-axis: 610 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 570 mm, nominal power (apparent): 50 kVA, workpiece weight (max.): 300 kg, total width: 650 mm, table width: 450 mm, rotational speed (max.): 10,000 rpm, overall weight: 7,500 kg, operating hours of spindle: 37,257 h, spindle motor power: 15 W, spindle nose: BBT40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC machining center with turning table, allowing loading on one side while the machine is operating on the other side. You are welcome to visit us and see the machine in operation. Bdedpfx Aaexrcm Iocei I can also forward a video of the machine if required.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Used Haas TL-1 Tool room lathe with CNC control, quick change tool post, operators manual and a 3 jaw chuck. Great used CNC lathe. SPECIFICATION Specification Swing over apron 406mm Swing over cross slide 241mm Distance between centres 762mm Spindle speed 0-2000rpm Spindle motor 5.5kW Spindle nose A2-5 Spindle bore 59mm Bedpfxenq Ddge Aacsdi MACHINE EQUIPPED WITH:- Operators Manual Quick Change Tool Post and Holders 3 jaw chuck Coolant system Guarding

Condition: excellent (used), Year of construction: 2013, CNC Vertical Machining Center Bdsdsxtnhyjpfx Aacoi WEMAS VZ 1020 QUICK Year of manufacture: 2013 Control: Heidenhain iTNC530 Technical data: X-axis travel: 1020 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Speed range: 40 – 10,000 rpm Tool holder: SK 40 Table clamping surface: 1100 x 600 mm T-slots: 5 x 18 x 100 mm Number of tool stations: 30 Feeds: Feed rate: 1 – 36,000 mm/min Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 24 m/min ————— ————— Spindle hours: 3444 h Accessories available Videos available

Condition: good (used), Year of construction: 2003, 5-Axis CNC Machining Center AXA VPC 40 U Year of manufacture: 2003 Control unit: Heidenhain iTNC 530 Travels: X = 2300 mm vertical / 2000 mm horizontal Y = 1200 mm Z = 600 mm Working area: Width: approx. 3000 mm Table height: Zmin = vertical/horizontal 110/160 mm, Zmax = Zmin + Z travel Rotary table height: Zmin = vertical/horizontal 110/160 mm, Zmax = Zmin + Z travel Tool changer: Double gripper for parallel tool preselection during main time Short tool change times, approx. 6 sec. Tool magazine: Chain magazine with 36 tool stations Tool holders SK40 DIN69871A Drive power: 30 kW / 143 Nm 40% duty cycle (Drive no. 110); AC - hollow shaft motor; Speed range: 30 – 10,000 rpm Working spindle: Single-axis swivel head Swivel movement over B-axis in increments of less than 1°, directly programmable from X 0° to X (-) 90°; Locking via Hirth coupling Coolant through spindle External 1100 l coolant tank with rotary filter, manufacturer: KNOLL, and adjustable high-pressure pump up to 30 bar NC rotary table AXA RTA 5S Rectangular faceplate 1100 x 1100 mm; Bjdexrn Taspfx Aacsdi Incl. hydraulic clamping, corresponding NC axis, and direct measuring system; Additional equipment: CNC control: Heidenhain iTNC 530 with digital drive control; Incl. hard disk storage and 15'' TFT display. Data interface V.24/RS232C for data transfer. Thread cutting without compensation chuck. Increased accuracy for X, Y, and Z axes with vertical spindle. Enhanced repeatability, increased positioning accuracy, including thermal compensation in X and Z axes. Measuring systems: Direct linear (manufacturer: Heidenhain), protected. Hinged belt chip conveyor Extraction unit for double-sided extraction with fully enclosed working area Hand rinsing gun for cleaning with coolant. Electronic handwheel with 2 m spiral cable. Tool measuring system TT 130 (manufacturer: Heidenhain) Flat/slideway system:

Condition: used, Year of construction: 1999, functionality: not functional, machine/vehicle number: 143826, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, Mazak VTC-20B machine is powered but no longer operational. Bdjdpfx Aaoxrymrscoi

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1000 mm centre height 200 mm centre distance 1000 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 1,8 t dimensions of the machine ca. 2,85 x 1,4 x 1,9 m voltage 400 V With chuck, Multifix toolholder and digital readout. Bjdpoxp Rzbofx Aacodi

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 4/0001/09472, MACHINE SPECIFICATION Distance between centres 635mm Centre height 165mm Swing Swing over bed 335mm Swing over cross slide 209mm Spindle Bored to pass 40mm dia Nose D1-4 Camlock Morse taper in nose N0 3 Width of bedways 231mm Travel Total travel of cross slide 209mm Total travel of top slide 95mm Total travel of tailstock barrel 146mm Speeds Spindle speeds (16) 22-1800rpm Spindle motor 2.25kW MACHINE SPECIFICATION Cont’d Whitworth threads (45) 2-72tpi Diametral threads (21) 8-44 Metric pitches (39) 0.2-14.0mm Module pitches (18) 0.3-3.5 Feeds Sliding feeds 0.001-0.040 ipr/spindle Surfacing feeds 0.0005-0.020 ipr/spindle Tailstock Approx weight 800Kg Machine in Imperial execution MACHINE EQUIPPED WITH 3 jaw chuck Quick change toolpost and 6 off toolholders Ainjest high speed screwcutting attachment Single bedstop Bdsdpfx Aasxn Iv Tscei 5 Position turret bedstop Apron dial Chuck guard Coolant system Rear splashguard

Condition: excellent (used), Year of construction: 2015, CNC machining center MTCUT V 85 Year of manufacture: 2015 Control system: Heidenhain ITNC 530 Electronic workpiece probe Electronic measuring probe ICS (internal coolant supply), spindle cooling Technical specifications: Travel paths: X: 850 mm Y: 520 mm Z: 610 mm Spindle nose to table: 150-760 mm Machine table: 1000 x 520 mm Max. table load: 700 kg T-slots in table: 5 Spindle speed: 10,000 rpm / SK 40 Weight: 7,000 kg Bdedpfxextnhts Aacei Request more information

Condition: excellent (used), Year of construction: 2011, CNC Turning-Milling Center MTCUT T20MC Year of manufacture: 2011 Driven tools available Accessories included Technical data: Working area • Max. swing diameter: Ø 470 mm (18.5”) • Max. machining diameter: Ø 280 mm (11.02”) • Max. machining length: 508 mm (20”) • Bed slide and inclination angle: 45° Bed • Max. longitudinal travel (Z-axis): 520 mm (20.47”) • Z-axis servo motor: 1.4 kW (1.8 HP) • Z-axis rapid traverse: 30 m/min (1181”/min) • Max. cross travel (X-axis): 176 mm (6.93”) • X-axis servo motor: 1.4 kW (1.8 HP) • X-axis rapid traverse: 30 m/min (1181”/min) Bdjdpjxtnhajfx Aacji Spindle • Main spindle bore / draw tube diameter: Ø 62 mm (Ø 2.44”) / Ø 52 mm (Ø 2.04”) • Spindle nose: ASA A2-6 • Taper angle of the bore in 8" spindle: 1/20 • AC main spindle motor: FANUC 7.5/11 kW (10 HP / 15 HP) • Speed (8" main spindle): Standard 4500 rpm Tool turret • Type: Hydraulic clamping device • Boring bar diameter / position: Ø 32 mm • Turning tool cross-section / position: □ 20 mm × 20 mm / □ 25 mm × 25 mm Tailstock • Quill diameter: Ø 75 mm (2.95”) • Stroke: 425 mm (16.73”) • Quill type: Fixed • Quill taper: MT No. 4 • Quill travel: 100 mm (3.94”)