Used Fitting Center for sale (15,228)

Condition: excellent (used), functionality: fully functional, Equipment: chip conveyor, Universal milling machine Deckel Maho DMU 50T with TNC 426 / 430 control from Heidenhain with chip conveyor Technical data: >> Year of manufacture 2000 Chodpsvyr N Sjfx Aacod >> Heidenhain control TNC 426 / 430 >> Travel paths X500/Y400/Z400 >> C and B axis manual with digital display >> Work spindle: Max. torque 88 Nm Max. spindle speed 20 - 9,000 rpm Tool holder SK40 >> Feed X, Y, Z -10,000 mm/min Rapid traverse X, Y, Z 12 m/min >> Tool magazine: Number of tools 16 >> Table Ø700x500mm >> Swivel range +95° /-10° >> Dimensions and weight: Dimensions 2,200 x 4,000 x 2,450 mm Weight approx. 3,500 kg >> Coolant system >> Power connection 400V kVA 17 About the machine: Offered is a Deckel Maho DMU 50T universal milling machine with a Heidenhain TNC 426/430 control in very good condition. The table can be manually (digitally) adjusted using two additional axes B and C. The machine runs smoothly and precisely. The DMU 50T has a chip conveyor. Take the opportunity to view and try out the machine on site with power on.

Condition: like new (used), Year of construction: 2015, operating hours: 15,000 h, functionality: fully functional, Year of manufacture: 10-2015 Control: OSP P300S Maximum turning diameter: 650 mm Main spindle Drive power: 32/22 kW Max. spindle speed: 3,000 rpm Max. torque: 955 Nm Spindle nose: A2-11 Spindle bore: 112 mm Hollow clamping cylinder SMW-VNK225-95, bore 95 mm Sub spindle Drive power: 26/22 kW Max. spindle speed: 4,000 rpm Max. torque: 420 Nm Spindle nose: A2-8 Bearing inner diameter: 80 mm Solid clamping cylinder SMW SIN-S175 Milling spindle Drive power: 22/18.5 kW Max. spindle speed: 12,000 rpm B-axis: 0.001° HSK-A63 Travel paths X1/X2-axis: 695/235 mm Y-axis: 300 mm Z1/Z2-axis: 1,600/1,524 mm B-axis: -30° to +210° Tool magazine / ATC 80 tool positions Max. tool diameter: 90/130 mm Max. tool length: 400 mm Lower turret 12-position tool turret Turning tool: 25 mm Boring bar: 40 mm Special equipment Software for limiting spindle speed to 3,500 rpm Software for multifunctional tools Software extension kit One Touch IGF-M-D Machining Navi M-g for milling operations Tool breakage detection – Renishaw TRS2 laser Machine-side preparation for high-pressure coolant 70 bar Factory-installed door automation Robot interface (Type “E”) Connection for oil mist extraction Separate coolant filtration system TMF300/980, drum-type swarf filter, clean tank 980L Chip conveyor Standard equipment Lower turret with 12 stations, direct mounting system "radial", with cylindrical roller guide on ZB-axis, sliding guide on XB-axis Collision avoidance system (CAS) in real time 19'' color LCD TFT with 3D color graphics as touch screen Second operating system Windows 7 for operation and open data communication, freely usable for Windows 7 compatible applications Tool monitoring system for service life and breakage+ Tool measuring device Chjdsxu Awlopfx Aacjd Machine management MacMan with integrated BDE Ethernet interface with browser and DNC-T1 for program transmission Prepared for remote diagnostics Harmonic spindle speed oscillation by periodic speed variation Tool height correction in Y-axis for rotating tools Circular thread milling X/Z/Y/B including eccentric milling X/Y/C Hi-Cut Pro high-speed control for rotary tools Coordinate transformation Electronic spindle orientation Dimensions and weight L/W/H: 4,480/3,082/3,030 mm, Weight: 18,000 kg

Condition: used, Year of construction: 1996, coolant ja Axis 3 9041 Cjdpsud Trwsfx Aacjhd x-travel 800 mm y-travel 550 mm z-travel 500 mm

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 8640, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table length: 8,000 mm, table width: 1,100 mm, year of last overhaul: 2021, CNC travelling column milling and drilling center Manufacturer: SORALUCE, Model: SP 8000 Year of manufacture: 2002/2021 (retrofitted/completely overhauled) Serial number: 8640 Travel range XYZ: 6500 x 1600 x 1200 mm Csdpfx Ajxt N Ihsacjhd Table size: 8000 x 1100 mm Spindle speeds: 20–3000 rpm Drive power: 28 kW, SIEMENS digital motor Fitted with HEIDENHAIN CNC control TNC426 M / iTNC 640 5 axes Tool holder: ISO50 Linear measuring system by HEIDENHAIN IRTS rotary table TLC, through-hole version Type TB830H 300-HV-RL Passage: 500 mm, plate size: 830 mm, With through bore: 300 mm Centre height: 500 mm Universal milling head, universal indexing device, 4-jaw chuck, Faceplate 800 mm, IRTS tailstock, chip conveyor, Spindle up to 3000 rpm, Machine weight: 26,800 kg, Drive rating: 62.5 kVA, fleece filter system, Hydraulic unit, 60-station tool changer, manual tailstock, coolant system, Original machine built in 2002, machine was completely overhauled/retrofitted in 2021 by Dornhöfer, Siegen.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 4-axis CNC machining center with console table and edge banding unit Manufacturer: IMA Model: BIMA 400 V Year of manufacture: 2009 8 manually adjustable supports in X-axis, 3 vacuum pods per console, Vacuum pump 100 m³/h -2* Vacuum connection for templates LED display for pod position indication Working area X: 200 – 6150 mm Working area Y: 0 – 1600 mm (milling/drilling), with edge banding 1525 mm Working area Z: 12 – 125 mm (clearance 150 mm) 14 vertical drilling spindles Horizontal drilling and grooving saw unit, swiveling 90° Milling spindle 11 kW / 7.5 kW up to 24,000 rpm With C-axis, 360° interpolation, liquid circulation cooling – 18-position tool changer, traveling with y-support Edge banding unit VT 100, 4-sided/all-round – rotation range 740 degrees With dual roller magazine, automatic granulate feeding Adapter units: – Saw, fixed at 90° – 5-axis saw/drill/milling unit Vario NC – Horizontal cutter (corner notching) – Flush trimming and profile scraping blade with extension for flat scraper ICOS open control system with 17" TFT ImaWop 6.0 incl. MDE and production list software Cjdpjxrltkofx Aacehd Chip conveyor Side safety fencing and front safety mats; Rear: requires wall placement or separate safeguarding

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS profile machining center – 5-axis CNC, year of manufacture 2003, ready for immediate use TECHNICAL DETAILS X-axis travel: 6,650 mm Y-axis travel: 800 mm Z-axis travel: 500 mm X-axis feed rate: 0–40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0–30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: 0–90° continuous C-axis rotation: 0–360° continuous B- and C-axis rotation speed: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a 6,000 mm length: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling cutters: Ø 300 mm Cedpfexr N Rmox Aacshd Maximum spindle motor power: 7 kW Disc milling cutter spindle motor power: 7 kW Spindle speed: 0–30,000 rpm Tool change time: < 15 s (clamp to clamp) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 positions Total machine weight: 6.5 tons WORK AREA Number of clamping blocks: 8 units Clamping block positioning: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 50M with line control TNC 124 from Heidenhain TOP condition !!! Technical data: >> Year of construction 1998 >> Heidenhain control TNC 124 >> Traverse paths X500/Y400/Z400 >> C and B axis manual with display >> Speed 20- 4500 1/min >> Feed 5000mm/min >> rapid traverse 5m/min >> Tool holder SK 40 >> Table Ø700x500mm >> swivel range +95° /-10° >> electronic handwheel >> Weight 2800Kg >> Machine dimensions approx. 4.0 m x 2.5 m height 2.6 m >> Coolant device >> Power connection 400V 32A Chsdpfx Ajr Hbf Eoacsd About the machine : We are offering a Deckel Maho DMU 50M universal milling machine with a Heidenhain TNC 124 line control in very good condition. The table is manually (digitally) adjustable by two additional axes B and C. A very easy to operate control, it can enter and approach positions, deep and thread drilling, drilling patterns, hole circles, hole rows and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain line control makes work easier and even more precise. The milling machine was used in a large company for training purposes. Take the opportunity to inspect and try out the machine under power on site.

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 41 kVA, controller model: Mazatrol Matrix Nexus 2, workpiece weight (max.): 8 kg, total height: 2,808 mm, total length: 2,880 mm, total width: 2,929 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, rotational speed (max.): 12,000 rpm, overall weight: 6,800 kg, operating hours of spindle: 9,271 h, spindle nose: 150-660, tool length: 350 mm, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Mazak Vertical Machining Center VCS 530C – well-maintained, inspected & ready for operation For sale is a Mazak VCS 530C vertical machining center in excellent, well-maintained condition, both visually and technically flawless. The machine has been regularly serviced and is in very good cosmetic and technical shape. It is fully functional, inspected, and immediately ready for use. The Mazak 530C impresses with its high-quality features, including a 4th axis that enables precise and efficient machining of complex workpieces, delivering greater flexibility. The automatic door provides added operator convenience, resulting in faster setup times and enhanced safety. Moreover, the coolant supply system (KSS unit) ensures optimal chip evacuation, which guarantees longer tool life and outstanding surface quality. All these features combine to deliver a powerful package designed for productivity, precision, and reliability. With our all-inclusive service package, we personally handle every aspect of the process for you upon request – from delivery to commissioning of your new machine. This includes unloading, installation, and alignment of the machining center. Subsequently, our experienced service technicians take care of the professional commissioning, carry out all necessary functional checks, and ensure that your Mazak VCS 530C operates reliably and precisely. We also offer customized training sessions for your staff so you can optimally utilize the machine from the very start. Even after installation, we remain available for ongoing support – whether regarding maintenance, technical questions, or future upgrades. With our all-inclusive package, you don’t need to worry about a thing – we make sure everything runs smoothly so you can focus entirely on your production. Additionally, we offer extraction systems, accessories, and add-on components, including high-quality Donaldson extraction units, to make your production even more efficient and clean. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specializing in Mazak and other machinery. We place great emphasis on personal support and will continue to assist you after your purchase. You are also welcome to inspect and test the machine under power at our facility at any time. Feel free to visit and see the machine’s condition and performance for yourself on site. Chsdpfxjxu Hhze Aaced With us, you are in the best hands – professional, reliable, and passionate about machinery!

Condition: good (used), Year of construction: 2009, XYZ: 1020 x 540 x 540mm, Chjdpfxsxfvnro Aacsd Table 1120 x 540mm, 15kW, Heidenhain tnc 530 , 10,000 rpm, 24 station ATC, BT40 taper, low volt light, swarf conveyor, coolant.

Condition: excellent (used), Year of construction: 2019, operating hours: 9,930 h, functionality: fully functional, machine/vehicle number: AA10001591, travel distance X-axis: 3,770 mm, travel distance Y-axis: 2,585 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 15 m/min, feed length X-axis: 3,086 mm, feed length Y-axis: 2,185 mm, feed length Z-axis: 150 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 6 m/min, nominal power (apparent): 29 kVA, controller manufacturer: SCM, workpiece length (max.): 3,086 mm, workpiece width (max.): 2,185 mm, workpiece height (max.): 150 mm, total height: 2,190 mm, total length: 5,215 mm, total width: 3,472 mm, table width: 2,185 mm, table length: 3,086 mm, overall weight: 2,800 kg, spindle speed (min.): 1,500 rpm, spindle speed (max.): 24,000 rpm, operating hours of spindle: 2,000 h, spindle motor power: 10 W, number of spindles: 1, number of slots in tool magazine: 19, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, Brand and Model: SCM MORBIDELLI N100 22-31 C Serial Number: AA10001591 Year of Production: 2019 Condition: Excellent Location: Northern Ireland Almost as new condition and well maintained In full working order and still in use Includes many extras for a cost free set-up Financial information VAT: The price shown is exclusive of VAT which is not applicable for purchasers outside the UK Duty: Shipments from Northern Ireland to the EU are excempt from customs and duty Price: As seen and excludes any moving of the machine or preparation for shipping Machine Specification: High Performance aluminium worktable 8 rectractable stops NC managed Two vacuum fields half and full table Chsdpfow Nyd Tjx Aacsd Vacuum cup set Automatic centralised lubrication system 2 off Becker 250/300 m3/hr vacuum pumps 9.5KW spindle 1500-24000 rpm with left and right rotation HSK F 63 quick release toolholder With exhaust hood for spindle 4 off air blowers on the spindle 1 off lateral pickup for aggregate tool High capacity toolholder with 19 places F12L drilling head comprising 4xleft and 4xright spindles 1off X and 1off Y double drilling heads 1off integrated blade in x axis Drill head complete with exhaust hood Bit speed 4500rpm 60mm stroke Blade 5500rpm Tool length detection system "Tecpad" wired remote control with 7 inch touch screen colour Eye-M PC integrated touchscreen control station Maestro CNC with 2 off dongles Extras include in price: Ducting for the machine to an extraction unit Switchgear and cables Tooling approx 20 HSK 63F ER32 holders plus collets 4 off EMST extract max tool holders PCD cutters Skimming tool Maestro nesting Alphacam 1 seat Full original documentation is available Also available: Extraction system to suit €4000 Compressor to suit €4500 Panel lifting unit to suit €12000

Condition: good (used), Year of construction: 2002, Universal Machining Center Machine type: DMG DMU 200 P Control: Heidenhain TNC 430 M Year of manufacture: 2002 TECHNICAL DATA: Travel paths: X-axis: 1,800 mm Y-axis: 2,000 mm Z-axis: 1,100 mm B-axis: 0.001° C-axis: 0.001° Number of controlled axes: 5 Speed range: 10,000 rpm Drive power: 44 kW Tool holder: SK 50 Tool changer Tool stations: 60 NC rotary table Table size: 1,700 x 1,400 mm Max. table load: 5,000 kg Equipment features: Chsdpfx Asxuqn Seacjd Chip conveyor Internal coolant supply (IKZ): 40 bar Paper band filter Measuring probe Electronic handwheel

Condition: used, Year of construction: 2018, functionality: fully functional, SMEC SL2500BSY CNC Lathe, Fanuc Control, Year 2018 – Excellent Condition For sale is our SMEC SL2500BSY CNC lathe with Fanuc control, manufactured in 2018. The machine is in good condition and can be inspected under power. We are selling the lathe solely due to space constraints. The sub spindle is NEW and has not logged any operating hours so far. Features and details: Csdexac A Eopfx Aacjhd - 12-station tool turret with BMT65 interfaces, 24-position indexing - Oil skimmer with endless belt for external oil separation - Three-color warning light - LED work area illumination - Chip conveyor, discharge to the right - Automatic door - Parts ejector at sub spindle incl. through-spindle cooling - Chuck air blast device on main and sub spindle - Parts catcher with collection box - Automatic tool setter arm - Main spindle: 250 mm chuck, 76 mm bar capacity, 10" 3-jaw power chuck - Sub spindle: 210 mm chuck, 8" 3-jaw power chuck Inspection available by appointment.

Condition: used, Year of construction: 1998, x-travel 650 mm Csdpfjxtxlvox Aacjhd y-travel 560 mm z-travel 650 mm table surface area 400 x 400 mm control Fanuc 18i-M spindle turning speed range 120-12000 U/min ja/yes hand wheel type of pallet-changer 2 Cooling through the spindle 10 bar chip conveyor ja/yes feed 670 mm/min distance work spindle /surface of the table 800 mm table load 400 kg toolpiece magazine: chain magazine 80 BT 40 b-axis 360 1° rapid traverse: 40 m/min feed 1-40.000 mm/min tool changing time 1,3 sec tool/tool tool changing time 3,8 sec chip/chip total power requirement 22,4 kW weight of the machine ca. 10,5 t dimensions of the machine ca. 5 x 3,3 x 3 m (LBH) Machining centre - Horizontal Mitsubishi M-H4B, year of construction 1998, good ondition, regularly maintained.

Condition: used, Year of construction: 2006, x-travel 450 mm y-travel 330 mm z-travel 350 mm control Heidenhain iTNC 530 turning speeds 42.000 U/min tool taper HSK 40 E Codpfexrg Ddsx Aacohd table surface area 470 x 400 mm T-slots 5 max. table load 500 kg Number of working hours 51993 h spindle hours 13858 h total power requirement 15 kW In our opinion, the machine is in very good condition and can be condition and can be inspected by appointment. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2014, Traverses X Y Z: 850 x 550 x 510mm, table size 500 xx 400mm, workpiece weight 500kgs, Chedpfx Ajxftdweacod A axis -120/+90 degrees, C axis 360 degrees, Spindle speed 10,000 rpm, Spindle taper BT40, 30 Station ATC, Matrix 2 Control, through spindle coolant, swarf conveyor

Condition: used, DOOSAN S390L CNC LATHE MAKE DOOSAN, MADE IN KOREA MODEL S 390L, YEAR 2000 CONTROL FANUC 21T SWING OVER BED 580 mm MAX TURNING DIA 390 mm DISTANCE BETWEEN CENTRES 800 mm CHUCK DIA 300 mm SPINDLE BORE 89 mm SPINDLE NOSE A1-8 Csdpfxoxfa Ipe Aacshd SPINDLE SPEED 3500 RPM SPINDLE MOTOR 30 HP TURRET 12 STATIONS, RAPIDS X: 24m/min Z: 30m/min TAILSTOCK YES MACHINE DIMS L: 2800 mm W: 1880 mm H: 1800 mm MACHINE WEIGHT 5000 KGS PLUS TOOL SETTING PROBE COOLANT SYSTEM TURRET TOOLING

Condition: used, Electric spare parts Mazak Mazatech V-10 Complete electric cabinet and operating panel Control Mazatrol M32 Free loading onto truck Csdpfxextq N Ho Aacehd Fixed price

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 11 kVA, workpiece weight (max.): 8 kg, total height: 2,808 mm, total length: 2,880 mm, total width: 2,929 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, rotational speed (max.): 12,000 rpm, overall weight: 6,800 kg, operating hours of spindle: 16,024 h, spindle nose: 150-660, tool length: 350 mm, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Mazak Vertical Machining Center VCS 530C – well-maintained, inspected & ready for operation For sale is a Mazak VCS 530C vertical machining center in a well-maintained, technically flawless condition. The machine has always been regularly serviced and is in excellent condition both visually and technically. It is fully operational, inspected, and immediately ready for use. With our all-inclusive service package, we personally take care of the complete service for you upon request – from delivery to commissioning of your new machine. This includes unloading, positioning, and aligning the machining center. Our experienced service technicians then handle the professional commissioning, perform all necessary function checks, and ensure that your Mazak VCS 530C operates reliably and precisely. In addition, we offer tailored training for your staff so you can make optimal use of the machine from day one. Even after installation, we continue to support you – whether it involves maintenance, technical queries, or future upgrades. With our all-inclusive package, you don’t have to worry about a thing – we ensure everything runs smoothly so you can focus entirely on your production. Optionally, you can also purchase extraction systems, attachments, and accessories from us, including high-quality Donaldson extraction units, to make your production even more efficient and cleaner. Our service promise: Chedpfxexuqrkj Aacod For us, quality, expertise, and customer satisfaction always come first. Our team consists of qualified and experienced technicians who specialize in Mazak machines as well as machines from other manufacturers. We place great value on personal support and are happy to continue assisting you even after your purchase. You also have the option to view and test the machine under power at any time in our facility. You are warmly invited to visit us and see the condition and functionality for yourself. With us, you are in the best hands – professional, reliable, and passionate about machines!

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle Codpfx Ajvyli Ejacehd very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders: 2x axial driven and numerous rigid tool holders 4x radiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 is without barloader. Loading magazine interface has been fitted.

Condition: good (used), Year of construction: 2012, functionality: fully functional, turning length: 555 mm, Machine type: CNC Lathe Manufacturer: Nakamura-Tome Model: WT-250 Year of manufacture: 2012 Control: Fanuc 18 IT Availability: short notice Including loading and unloading system from Breuning Machine Equipment - Bar feeder – max. bar length 6 m Max. loading length: 6,200 mm 8 channels with channel diameters: Ø 22 mm, Ø 27 mm, Ø 32 mm, Ø 37 mm, Ø 42 mm, Ø 47 mm, Ø 57 mm, Ø 67 mm Including 8 pushers with pusher rod taper Intermediate sizes can also be loaded - Unloading magazine – max. bar length 2 m - Coolant tank - Chip conveyor – new from 10/2021 - Last overhaul of bar feeder in 09/2020 – channel replacement, replacement of various bearings, replacement of pusher rods and spindle liners, incl. maintenance Technical Details - Main spindle drive power: 18.5 kW / 15 kW - Sub spindle drive power: 11 kW / 7.5 kW - Main spindle torque: approx. 200 Nm Data sheet: 10-13 kgfm = 100 Nm – 125 Nm - Sub spindle torque: approx. 100 Nm Data sheet: 7.3-10 kgfm = 100 Nm – 125 Nm - Spindle speed: 59–4,500 rpm - Main spindle bar capacity: 65 mm - Sub spindle bar capacity: 51 mm Chedpfx Asxur H Aeacjd - Axis configuration X: both turrets Y: upper turret only Z: both turrets C: both spindles - Traversing paths X1 / X2: 195 mm Y: ±41 mm Z: 600 mm - Main spindle nose: A2-6 - Sub spindle nose: A2-5 - Max. workpiece diameter: 250 mm - Max. turning length: 555 mm - Number of tool positions Upper turret: 12 Lower turret: 12 All stations can be powered - Feed drive in X1 / X2 and Y: 1 kW - Feed drive in Z1 / Z2: 2.1 kW - Machine dimensions (LxW): 4.5 m x 2.6 m - Bar feeder dimensions (LxW): 7.0 m x 1.5 m - Unloader dimensions (LxW): 6.0 m x 1.5 m

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. Chedpexrahcjfx Aacod 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Condition: used, Year of construction: 2015, HAAS SUPER MINI MILL VERTICAL MACHINING CENTRE MAKE HAAS, MADE IN USA MODEL SUPER MINI MILL YEAR 2015 CONTROL HAAS NEXT GENERATION TABLE SIZE 914.0 mm x 305.0 mm TRAVERSES (XYZ) X AXIS: 406.0 mm Y AXIS: 305.0 mm Z AXIS: 254.0 mm SPINDLE SPEED 10,000 RPM SPINDLE TAPER BT 40 ATC 10 Chedpfx Aoxfazpsacsd PLUS HIGH SPEED SPINDLE COOLANT SYSTEM SPINDLE TOOLING FULL SET OF MANUALS FULLY FUNCTIONAL ONE PREVIOUS OWNER

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: E21PI17058028274, This listing is for a Vario Cooking Center VCC 211+ from the premium manufacturer Rational. This VCC is the Plus version and includes the pressure cooking mode. It has undergone a comprehensive inspection in our in-house workshop and is fully functional, supplied with a 6-month warranty. Accessories can be purchased upon request. If desired, we can provide a demonstration video of the unit (frying pan) in operation. MSRP for the VCC 211+ with pressure function: €23,593 net. You will receive an invoice with VAT shown separately. Service: We are happy to arrange for a certified Rational service partner, master-level, within approximately 100 kilometres of our location (ZIP: 35418). Are you looking for a specific Rational model? Contact us – we have access to a wide range of used and new equipment. We are happy to advise you on all unit types, including SCC, CM, CMP, VCC, iVario, and iCombi Classic and Pro models. Our used equipment service for you: - 6-month warranty on all electrical components - High-quality branded units at fair prices - Professional refurbishment / inspection & expert cleaning - Tested & fully functional – or your money back - Flexible shipping or local pickup options - Expert advice before and after purchase - Provision of operating manuals, wiring diagrams & spare parts - Electrical safety testing in accordance with DGUV V3 The Vario Cooking Center MULTIFICIENCY® combines the functions of traditional cooking equipment such as range, griddle, fryer, tilting pan, and kettle in one. Additionally, the Plus version features a pressure cooking mode, enabling you to cook, fry, and deep-fry in the smallest of spaces, unattended, and always with perfect results. Technical data: - W x D x H: approx. 1164 x 914 x 1100 mm - Power supply: V: 400 / kW: 28 / Hz: 50 - Weight: approx. 223 kg - Serial number: E21PI17058028274 - Year of manufacture: 2017 Cedpfx Aajxr Uvhecjhd Condition: pre-owned, tested and fully functional Further features: - Core temperature probe - Floor-standing unit with height-adjustable feet - Plus version including pressure mode - Vario Dose – integrated water inlet - Integrated water drainage - Autolift lifting and lowering mechanism - Burn protection - Unheated side panels - Vario Boost® heating system = 200 °C in 2.5 min - Integrated hose shower - For 100 – 300 meals - Usable capacity: 100 litres Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, controller model: P200M, Machine type: Horizontal Machining Center Manufacturer: OKUMA Model: MA-400HA Year of manufacture: 2008 Control: OSP – P200M Country of origin: Japan Delivery: short-term by arrangement 4-axis machining center! High productivity! Includes various accessories! Machine equipment: - ConSep chip conveyor system with high-pressure pump - Various software features - Touch setter with length measurement and breakage detection - Work area shower Short description: This machining center is in good overall condition. Its comprehensive base and additional equipment make this used machine highly versatile and characterized by high productivity. 4-axis machining enables efficient and flexible processing of workpieces. The integrated ConSep system with high-pressure pump ensures coolant filtration is directly integrated into the production process. The touch setter not only measures tool length but also monitors for breakage. Additional accessories such as a work area shower and software packages further enhance the production capabilities. This CNC machining center allows for cost-effective and efficient manufacturing. Technical specifications: - Axis travel: X-axis (column left-right): 560 mm Z-axis (table front-back): 625 mm Y-axis (spindle up-down): 610 mm - Number of pallets: 2 (2-pallet changer) - Pallet size: 400 x 400 mm - Max. pallet load: 400 kg - Max. workpiece dimensions on pallet: Ø500/600 x 710 mm - Spindle speed: 15,000 rpm - Main spindle (10min/cont.): 22/18.5 kW - Tool holder: BT40 - Tool magazine: 60 positions - Machine dimensions without accessories (LxW): approx. 4450 x 2410 mm - Total machine length (machine with ConSep unit): approx. 6600 mm - Machine height: approx. 2950 mm - Weight: approx. 11,500 kg Optional: - Transport arrangement and execution - Machine installation and setup Cjdpfxow Hzxzo Aacshd - Machine commissioning

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller model: P200M, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 64, tool length: 300 mm, tool diameter: 150 mm, Equipment: chip conveyor, Transport, installation, and commissioning – we deliver your machine ready for operation (optional) Machine type: Horizontal Machining Center Manufacturer: Okuma Model: MB-5000H Space Center Year of manufacture: 12.2010 Commissioned: End of 2011 Control system: OSP-P200M Delivery time: by arrangement 👉Spindle speed 15,000 rpm 👉ConSep coolant filtration system 👉Tool magazine – 64 positions The machining center is in very good overall condition. The machine is suitable for both heavy-duty machining and fine finishing operations. Thanks to its comprehensive basic and additional equipment, including a ConSep coolant filtration system, high-pressure coolant pump up to 70 bar, 64-position tool magazine, dual pallet changer, and spindle speed up to 15,000 rpm, your production becomes significantly more efficient. The machine operates accurately and precisely. Machine features 👉ConSep coolant filtration system with chip conveyor 👉High-pressure coolant pump up to 70 bar 👉Spindle speed 15,000 rpm 👉64-position tool magazine 👉Dual pallet changer Technical data Travel X-axis (column right-left): 760 mm Z-axis (table front-back): 760 mm Y-axis (spindle up-down): 760 mm Rapid traverse X/Y/Z axes: 60 m/min Distance pallet to spindle center: 50–810 mm Distance pallet center to spindle nose: 135–895 mm Palette Pallet size: 500×500 mm B-axis indexing: 1° Max. load capacity: 500 kg Pallet changer: dual Codjw S Hcbspfx Aacjhd Spindle Spindle speed: 15,000 rpm Spindle power: 26 kW Max. torque: 199 Nm Tool holder: BT40 Tool magazine: 64 positions Max. tool diameter (adjacent tools fitted): 70 mm Max. tool diameter (no adjacent tools): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Options 👉Transport organization and execution 👉Machine rigging and installation 👉Machine commissioning and production-ready handover