Used Flywheel for sale (152)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2001 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, Soprem powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2001 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control Soprem RMI 50 F1 Powered Auto/Manual Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, Soprem RMI 50 F1 powered automatic/manual decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Crsdpjz Irbqofx Apbsh Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. Soprem RMI 50 F1 Powered Decoiler – 1992 Powered coil decoiler with automatic/manual operation, suitable for supplying strip material to the press for coil-fed production. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring Soprem powered automatic/manual decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, power: 720 kW (978.93 HP), color: black, output voltage: 400 V, continuous power (apparent): 800 kVA, output frequency: 50 Hz, Containerized Rotary UPS System Featuring Marelli Generator MJB 400 LB4 B2 & Rotabloc Flywheel Technology Model:MJB 355 MB4 B2 Rated Power: 900 kVA, 400V / 920 kVA, 440V Active Power: 720 kW Voltage: 400 V / 440 V Frequency: 50 Hz / 60 Hz Rated Current: 1155 A, 400V / 1207 A, 440V Csdpfowx H Hzjx Apbjrh Speed: 1500 / 1800 rpm Power Factor: 0.8 Insulation Class: H Weight: 1950 kg Protection class: IP23 Bearings: 6317 C3 Lubrication: Mobil Polyrex EM Rotabloc RBT Alternator (Flywheel-Based UPS) Model Type: MJB-355 UPS Power Limitation:500 kVA Voltage Range: 400 V ±12.5% Current: 722 A Frequency: 50 Hz Speed: 1500 rpm Weight: 1950 kg Manufactured in Belgium Features & Benefits Rotary UPS – No batteries required Compact footprint with integrated cooling Ideal for grid stability and critical systems Reliable European engineering (Belgium & Italy) CE marked, ready for international use

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2000 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, OBRU powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2000 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control OBRU Powered Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, OBRU powered decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Credpoz It Dmofx Apboh Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. OBRU SAH 1M Powered Decoiler The machine is supplied with an OBRU SAH 1M powered / motorised decoiler, suitable for unwinding coil strip for feeding into the press. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring OBRU powered decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: used, Year of construction: 2012, power: 800 kW (1,087.70 HP), Rotary UPS System – 800 kVA –Marelli + Rotabloc Availability: In stock (2 units) Location: UK High-quality Rotary UPS System with integrated components: ✅ Marelli Generator – MJB 400 LB4 B2 ✅ Rotabloc Alternator – ALT-800 ✅ Rotabloc Flywheel Accumulator – ACC-1000 Technical Specs Marelli Generator 800 kVA 400 V / 480 V – 50/60 Hz 1155 A / 962 A 1500 / 1800 rpm Weight: 2709 kg Made in Italy (2012) Rotabloc Alternator (ALT-800) 800 kVA 400 / 480 V 50 / 60 Hz Weight: 2750 kg Made in Belgium (2012) Flywheel (ACC-1000) 800 kW Crsdpfx Aewuyzwjpbeh Drum speed: up to 3000 rpm Weight: 5250 kg Made in Belgium ✅ Advantages No batteries required – flywheel technology Immediate response during grid failure Built to ISO9001 / CE standards Reliable, compact, and scalable

Condition: used, Primultini cast iron band saw with 100 cm flywheel and tilting table, maximum useful board passage 90 cm. 10 HP motor power. Used. Cjdpfxezz Rmuo Apbsrh

Condition: excellent (used), 1 flywheel 1260 mm Ø, weight approx. 500 kg 1 flywheel, 1320 mm in diameter x 220 mm wide, approx. 40 mm ring thickness Credpfxjwb A Sfe Apbeh

Condition: used, mileage: 112,000 km, power: 103 kW (140.04 HP), first registration: 05/2009, fuel type: diesel, overall weight: 2,210 kg, next inspection (TÜV): 10/2028, color: white, gearing type: mechanical, emission class: euro4, number of seats: 5, total length: 4,505 mm, total width: 1,794 mm, total height: 1,694 mm, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), 1st owner. Only just over 112,000 total kilometers with service booklet (last service 02/2026 at 110,216 km at a VW dealership). Most inspections were carried out at an authorized VW service center. New TÜV (German technical inspection) valid until 10/2028. Directly from the fleet of a German aid organization. Many of the components that typically need replacing on a VW Touran have already been replaced recently: 2026: New turbocharger 2023: New timing belt 2023: New clutch and new dual-mass flywheel 2023: New front brakes and new rear brake pads The Touran was delivered in the fire department and disaster relief version. It has a STROBEL conversion as an emergency response vehicle with rear-mounted storage, drawers, and a partition grille. LED light bar on the upper part of the tailgate. Previously registered as an NEF (emergency medical response vehicle) "other type of vehicle". 5 seats. Equipped with a special signaling system. Off-road chassis as standard. 8 tires (including rims). Air conditioning. Auxiliary heater (already renewed). Audio system. Cruise control. ABS. ESP. Brake assist. Airbags for driver and front passenger, as well as side airbags. Central locking/remote control (2 original VW remote keys included). 2.0 liter - TDI diesel engine, Euro 4. Green environmental badge. 6-speed manual transmission. 200 km/h maximum speed according to documentation. Additional turn signal lights at the top rear. The Touran is in good condition. It was recently driven to us without any problems for almost 400 kilometers on the highway. The VW has no unusual noises and no error messages. The Touran runs very smoothly and powerfully. The regular maintenance over the years has paid off. According to the aid organization, the power supply located at the bottom left at the rear is currently not functioning. We were unable to verify this ourselves due to a lack of a suitable connection cable. Signs of use are present, but damage and accidents are not known. A suitable set of snow chains is also included in the vehicle. The currently mounted, good winter tires with the snowflake symbol are from CONTINENTAL and have a DOT code of 2022. The Touran is available immediately. Csdjz Iuztjpfx Apbsrh This offer is only valid for businesses, freelancers of all kinds, as well as for authorities / emergency services / aid organizations of all kinds. Unfortunately, we do not sell to private end consumers. Subject to prior sale and errors. The purchase price is the final price, gross = net (=differential taxation according to §25a UStG. This means that no value-added tax is added to this purchase price and, at the same time, the VAT cannot be calculated separately).

Condition: used, mileage: 272,115 km, power: 62 kW (84.30 HP), first registration: 04/2018, fuel type: diesel, next inspection (TÜV): 07/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * €9,200 net * Volkswagen T6 Kombi 2.0 Tdi L1H1, 9 seats, air conditioning, sliding door, Euro 6 * Seats: 9 (3+3+3) * 5-speed transmission * Front airbags * Armrest * Electric windows * Electric mirrors * Central locking * Steel rims * Isofix * Air conditioning Cjdpfx Apjyy T Nxsberh * ABS * ASR * Radio/CD player * Daytime running lights * Start/Stop system * Tire pressure monitoring system * Sliding door on the right * Wheelbase: 300 cm * Unladen weight: 1738 kg * Permissible total weight: 3000 kg * Passenger car registration * Vehicle No. 58 Timing belt replaced at: 233,000 km Dual-mass flywheel makes noise. OPENING HOURS Monday - Friday from 09:00 to 17:00 (by appointment...) CONTACT DETAILS Telephone: WhatsApp Email: Transfer and customs plates (export number) available from us. Subject to errors, typos, and prior sale. Technical specifications and equipment features must be checked separately. The condition as per the contract is only what is inspected on-site at the time of purchase and confirmed in writing. Please arrange an appointment...

Condition: excellent (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, For sale: Drozdowski PRP-58 log saw. Year of manufacture: 2023. The machine has been used very little. Wood is fed by a chain, enabling cutting of logs from 0.8 to 4.5 meters in length. Automated log handling with hydraulic system and side discharge of cut material. The entire unit is mounted on a steel frame, which allows for cutting without the need to chisel the floor or create openings for sawdust and flywheels. A large number of saw blades and spacers in various sizes are included. I also have a blade guide and a sharpening tool for these blades. Crsdpfxjzuwz Es Apbjh

Condition: used, Year of construction: 2014, machine/vehicle number: 42, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 2,550 mm, total length: 5,500 mm, total width: 2,200 mm, overall weight: 2,600 kg, saw band length: 5,900 mm, saw band width: 13 mm, We offer a used, fully operational CNC 020 industrial bandsaw with automatic feeder, designed for high-precision cutting of wood or composite materials. The machine features CNC control and automatic feed in X, Y, and C axes, allowing fast, accurate, and repeatable cuts up to 2000 mm in length. Technical data: CNC Cutting Length: 0 – 2000 mm Cutting Height: 0 – 160 mm Cutting Angle: +90° / -90° Cutting Depth: 100 mm Saw band: 5900 x 13 mm Flywheel Diameter: 900 mm Flywheel Upper Adjustment Range: 0 – 80 mm Flywheel Speed: 750 rpm Saw Speed: 2000 m/min Flywheel Motor self-braking 15 HP Forward Movement Speed X-axis: 0 – 70 m/min Return Speed X-axis: 70 m/min Forward Movement Speed Y-axis: 0 – 20 m/min Return Speed Y-axis: 20 m/min Pneumatic Pressure: 6 BAR X-axis Motor Torque: 12 Nm Y-axis / Y2-axis Motor Torque 4.3 Nm B-axis / C-axis Motor Torque 1.1 Nm Crodexm S E Aepfx Apbjh Z-axis Motor Torque: 4.3 Nm Overall Dimensions 5000 x 2200 x 2550 mm Weight CNC 020 2600 kg Additional Information: We have 4 identical machines available, all from similar years of manufacture, in good condition. Ideal for production lines requiring multiple synchronized units or for spare parts standardization.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total width: 1,700 mm, total height: 1,500 mm, total length: 3,050 mm, briquette diameter: 90 mm, overall weight: 5,800 kg, type of input current: three-phase, power: 80 kW (108.77 HP), year of last overhaul: 2014, Equipment: cooling unit, emergency stop, Complete, turnkey production line for wood briquettes based on the C.F. Nielsen BP 6000 mechanical briquetting press – a benchmark for high-density, round briquettes. The line covers the entire technological cycle and is offered as a single package with all auxiliary units. Process: raw material storage → metered screw feeder → high-pressure pressing → cooling line → automatic squaring saw → roller conveyor → two-stage Kallfass packaging (film wrapping + heat shrinking). Key data – C.F. Nielsen BP 6000 press: Round briquette Ø90 mm Output 1,200–1,800 kg/hour (depending on the material) Main motor 55 kW with soft starter Siemens PLC control Lubrication on bronze bearings Dimensions ~3,050 × 1,700 × 1,550 mm, weight ~5,800 kg Included: 2 flywheels, control cabinet, Grundfos oil cooler, Ø90 mm dies Scope of supply (complete line): C.F. Nielsen BP 6000 mechanical briquetting press Feed hopper (~1,300 × 1,300 × 1,200 mm) Mixing and transport screws Feeder with rotary valve + control cabinet OBL MB 75 PP metering pump (max. 420 l/hour) Codpsztq Hxofx Apbsrh Cooling line – 10 × tube Ø90 × 3,000 mm, with supports Most MBC 100 P squaring saw (disc Ø350/30 mm, cut 100 × 100 mm) Roller conveyor (3,500 × 490 mm, 46 rollers) Kallfass Wrapmat 900 wrapping machine Kallfass 950 Uni heat shrinking tunnel (27 kW) with KORA PACKMAT friction feeder Condition: according to documentation, machines are fully refurbished and stored in original packaging, unused. Some units (cooling line, saw) are still in crates; the feeding section is shown installed. Offered as a single, complete line, sold “as is” – inspection is welcome. Ideal for manufacturers of wood/biomass fuel briquettes (sawdust, wood chips, wood shavings) who are looking for a proven European line at the price of a single used press. Price: €80,000 net (excluding VAT), entire line with all components. Delivery – self-collection, location on request. Photos and technical documentation – upon request.

Condition: ready for operation (used), Year of construction: 2008, stroke length: 8 mm, overall weight: 22,000 kg, Mechanical stamping press manufactured in 2008. This SANGIACOMO T250 RCE features a nominal force of 250 t and an adjustable stroke ranging from 15 to 220 mm. It has a maximum die surface of 800 × 1,450 mm and a closed die maximum height of 662.5 mm. If you are looking to get high-quality stamping capabilities, consider the SANGIACOMO T250 RCE machine we have for sale. Contact us for further details. • Adjustable stroke: 15–220 mm • Ram adjustment: 100 mm • Stop position: T.D.C. • Stroke rate: 20 / 42 / 50 strokes/min • Maximum insertions per minute: 18 • Maximum die surface: 800 × 1,450 mm • Closed die maximum height: 662.5 mm • Closed die minimum height: 460 mm • Maximum upper die weight: 300 kg • Flywheel speed: 176 / 370 / 441 rpm • Stop time: 206 ms • Safety distance at 1.6 m/s: 330 mm • Total installed power: 22.37 kW • Supply voltage: 400 V • Auxiliary circuit voltage: 24 V • Required working air pressure: 5.5–6 bar • CE marked: Yes Codpfx Apjz Izzgebjrh Technical Specification Stamping Force 2500 Kn

Condition: excellent (used), Used Amada 60ton C frame press for sale SPECIFICATION MODEL TP -60 Crjdjyk D Dtopfx Apbjh CAPACITY 60 ton NUMBER OF SLIDE STROKES 50 Hz 45-80 strokes/ minute STROKE LENGTH 120 mm SLIDE ADJUSTMENT 70 mm SLIDE AREA (R-L x F-B) 500 x 400 mm BOLSTER AREA & THICKNESS (R-L x F-B x thickness) 900 x 550 x 80 mm SHUTHEIGHT 370 mm MAIN MOTOR 5.5 x 4 kWXP AIR PRESSURE REQUIRMENT 5.0 kgf/cm2 MAXIMUM NUMBER OF FLYWHEEL ROTATIONS 1170 r.p.m. MINIMUM AIR PRESSURE FOR CLUTCH ON STOPPING TIME 165 msec BRAKE MONITOR SETTING, DEGREES BEYOND T.D.C. 15 degree SERIAL NO. 07312665 MANUFACTURE DATE 1992.4 MANUFACTURED BY AMADA CO., LTD.

Condition: used, mileage: 1,000,820 km, power: 220 kW (299.12 HP), first registration: 01/2011, fuel type: diesel, number of seats: 40, gearing type: automatic, emission class: euro5, color: beige, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro O530 Ü 100 Km/h (40+1+3 emergency seats) with seatbelts, full air conditioning (Vehicle 729) First registration: 18.01.2011 1,000,820 km Engine: 11,967 ccm 220 kW / 300 hp Bluetec 5 EEV MOT valid until 10/2026, TÜV (technical inspection) valid until 04/2027 Permissible gross vehicle weight (GVW) 18,600 kg, unladen weight 11,760 kg, payload 6,840 kg Overall length 11,950 mm x overall width 2,550 mm x overall height 3,400 mm Tires 275/70R22.5, front approximately 90%, rear approximately 40/40% Double doors front and rear Driver's cab with door Ramp Fully automatic transmission Microphone Electric windows 2 x electric + heated mirrors Full air conditioning Auxiliary heating + 2nd heater Stop brake 40+1+3 emergency seats Emergency exit 12-volt socket Chassis with slight surface rust 01.12.2024: Air suspension on the rear axle, left side, replaced 20.02.2024: Air conditioning compressor replaced 20.03.2024: Axle ventilation replaced ABS sensor on the rear axle, right side, replaced with sealant Rear axle hub replaced Front axle triangular wishbone replaced 06.05.2024: Rear axle, right side, sensor replaced 10.07.2024: Triangular wishbone, right side, lower arm replaced Air suspension on the rear axle, left side, rear, replaced Multi-circuit safety valve replaced 24.09.2024: Water hose for transmission cooler, thermostat, and water filter replaced 08.08.2025: Front axle brake pads replaced 08.08.2025: Rear axle brake pads replaced 06.01.2026: 6 x valve covers replaced 20.02.2026: Seal between crankshaft and flywheel replaced Stabilizer bar on rear axle replaced Codpez H Ecfefx Apbjrh Various signs of wear and tear, consistent with age Last inspection on 02.10.2025 at 974,472 km, next inspection due at 1,034,472 km Price: 8,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the district court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Errors, typos, and prior sale are subject to change.

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 580 mm, Equipment: CE marking, documentation/manual, – CE certificate – Operating manual – Italian production – Year of manufacture: 2006 TECHNICAL PARAMETERS: – Diameter of guide wheels: Ø 600 mm – Cutting height: max. 360 mm Crsdey El U Djpfx Apbsh – Cutting width: max. 580 mm – Table dimensions (L/W): 800 x 585 mm – Saw table tilt: 0° - 20° – Minimum blade/bandsaw length: 4480 mm – Minimum blade/bandsaw width: 10 mm – Maximum blade/bandsaw length: 4580 mm – Maximum blade/bandsaw width: 35 mm – Flywheel speed: 715 rpm – Motor power: 2.2 kW / 400 V / 50 Hz – Extraction port diameter: 100 mm – Machine dimensions (L/W/H): 1120 / 800 / 2200 mm – Weight: ~300 kg

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 350 mm, cutting width (max.): 520 mm, control type: manual, roller diameter: 540 mm, pivoting range: 15 °, actuation type: manual, rotational speed (max.): 950 rpm, total height: 1,970 mm, total length: 870 mm, total width: 620 mm, overall weight: 234 kg, table height: 840 mm, Equipment: documentation/manual, motor brake, • Heavy-duty design with high weight for maximum smooth operation Crodpfx Aszvd Egjpbjh • Cast-iron flywheels with rubber coating and cleaning brush • 3-roller precision saw blade guide as standard, located at the top and bottom • Large cast-iron saw table, swiveling from 0° to +15° with a ground and polished surface • Precise cutting height adjustment via rack and pinion with millimeter scale • Particularly quiet and precise operation thanks to the torsion-resistant machine housing • Large cast-iron parallel guide with round bar guide, easily adjustable • Saw blade tension indicator • Self-braking motor

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, total width: 900 mm, total length: 900 mm, total height: 1,800 mm, energy consumption: 11 kWh, Equipment: CE marking, documentation/manual, We offer this new RPE RPE-110 plastic/Cable/wood etc processing machine, year of construction 2025. The machine is designed for efficient shredding of both soft and hard plastics. It can also process materials such as cardboard, paper and wood, making it a versatile solution for recycling and waste-processing applications. The cutting rotor is fitted with 15 movable knives arranged in three rows, working together with 2 fixed knives mounted on the cutting chamber cover. The cutting chamber can be opened easily, providing convenient access for inspection, cleaning and maintenance. This design also allows the cutting knives and screen to be replaced quickly. The knives can be sharpened and reused several times, helping to reduce operating costs. Technical Specifications Motor: 11 kW, 400 V Capacity: up to 650 kg/h, depending on the type of material Screen perforation: 10 mm Rotor diameter: 260 mm Rotor speed: 560 rpm Cutting system: 15 movable knives + 2 fixed knives Cutting chamber: 500 × 370 mm Noise level: 80–95 dB Machine dimensions: 1420 × 1030 × 1410 mm Net weight: 780 kg The cutting chamber measures 500 mm in width and 370 mm in length. A 10 mm screen is supplied as standard, while a 6 mm screen is also available as an optional accessory. The crusher is suitable for processing a wide range of materials, including: Plastic bottles Wooden boards Various plastic products such as soles, strips, profiles, mouldings and film Materials containing small amounts of metal, such as cables and electronic boards Paper, cardboard and paper waste Rubber products With a rotor speed of 560 rpm, the machine is designed to minimize heat generation and prevent excessive melting of the processed material. The powerful 11 kW motor, combined with the heavy-duty flywheel, provides sufficient power for processing demanding and hard plastic materials. The machine can achieve a throughput of up to 650 kg/h, depending on the characteristics and type of material being processed. A practical pull-out waste drawer allows the processed material to be removed quickly and conveniently. The drawer is fitted with four wheels for easier handling. Easy access to the cutting chamber simplifies routine maintenance, inspection and knife replacement. The machine is equipped with a main power switch, emergency stop and clearly arranged control panel. Safety systems are designed in accordance with the applicable EU safety requirements. Cjdpfx Apoz Ikwdsbjrh For optimum performance, the material introduced into the machine should be pre-cut or supplied in a suitable size. The appropriate input fraction depends on the type and characteristics of the material. Safety and CE Certification The crusher is CE certified. Each opening/cover is fitted with a limit switch, preventing the machine from operating while the cutting chamber is open during maintenance or inspection. Drop Chamber Dimensions Width: 500 mm Height: 260 mm The machine is fitted with adjustable support feet, allowing accurate horizontal leveling during installation. Optional Equipment For an additional charge, the machine can be supplied with a waste drawer equipped with an exhaust connection, suitable for connection to an external extraction system. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, mileage: 114,290 km, power: 265 kW (360.30 HP), first registration: 08/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, total length: 9,550 mm, total width: 2,550 mm, total height: 3,580 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), * Our internal vehicle number: 1204 MAN TGS 28.360 * Faun Rotopress 518 Terberg Omnideka * Output: 265 kW * Emission standard: Euro 6C * Type: Waste collection vehicle * First registration: 08/2018 * Mileage: Original * From 1st German municipal ownership * Automatic transmission - D/N/R * FAUN Rotopress 518 - Superstructure * Terberg Omnideka - Tipping body Crsdpfez E T Tisx Apbsh * 265 kW / Euro 6C * Reflectors * Rear view camera * Air conditioning system * 6 seats = 2 single seats (driver / passenger) + bench seat for 4 people * Storage box on the outside, on the left-hand side * Digital tachograph Excerpt from chassis number recognition (All information without guarantee): Special equipment: Exterior mirrors and wide-angle mirrors electrically adjustable and heated, wide-angle mirror with electrically adjustable maneuvering aid, battery 225 Ah, battery disconnect switch mechanical, passenger seat comfort, air-suspended, curb mirror right electrically adjustable and heated, differential lock rear axle, digital axle load indicator for air-suspended axles, pressure sensor for air suspension bellows, ETA circuit breaker, cab: tilting mechanism electro-hydraulic, cab: with air suspension, driver's seat comfort, air-suspended and heated, with lumbar support, remote control central locking, flame starter system, flange coupling auxiliary drive elastically loose, windshield tinted and heated, tilting lever - brake EVBec controlled, automatic climate control, steering wheel with multifunction, air compressor 2-cylinder 720 ccm, air dryer heated, auxiliary heater Eberspächer D4S, auxiliary drive flywheel side, sun visor exterior, sound system, socket cab 12V and 24V, control module for external data exchange, bumper in steel design 3-piece, additional front / fog lights with cornering light Additional equipment: Axle configuration: 6x2, approach / front mirrors, trailer socket 24V / 7-pole, trailer socket ABS, anti-slip control (ASR), audio system: Radio MAN basic Line (Radio / CD), on-board computer MAN-Tronic, electronic braking system MAN-Brakematic, EURO 6 engine, cab: L, lower sleeper bunk with storage space, suspension: leaf / air, power windows, generator 28 V 80 A, transmission 16-speed - Type: ZF 16 S, lift roof mechanical, body / superstructure: chassis, tilting lever - brake EVB, fuel filter heated, fuel tank: combination tank - 400 L diesel + 60 L urea solution (AdBlue), air intake raised, engine 10.5 L - 265 kW diesel, trailing axle NO-08, liftable, spare wheel holder behind rear axle, disc brake rear axle, disc brake front axle, protective device side, side windows rear tinted, sun protection roller for windshield, spray mist reduction, stabilizer on one rear axle, stabilizer front axle, TGS, door windows tinted, underrun protection rear, underrun protection front, viscous fan, front axle VOK-09 arched, central locking, permissible total weight 26.0 t Note: Typographical errors excepted. The customer is obliged to independently verify the condition and equipment of the goods / vehicle! All information without guarantee We reserve the right of prior sale We refer to our general terms and conditions.

Condition: excellent (used), table dimensions: 1170x800 maximum cutting width: 780 mm maximum cutting height: 480 mm Cedpfxjzvn Sde Apborh flywheel diameter: 45 mm weight: 820 kg year of manufacture: 1998 power: 5.5 kW speed: 690 RPM CE marking

Year of construction: 2003, condition: ready for operation (used), Plastic processing machine manufactured in 2003. This DREHER S 42/65 GFS-15 GR features a powerful 45 kW drive motor and a working width of 650 mm. It includes a protective soundproof enclosure and a granulator function, along with various additional equipment such as a Z-conveyor belt and a discharge extraction station. If you are looking to get high-quality plastic processing capabilities, consider the DREHER S 42/65 GFS-15 GR machine we have for sale. Contact us for further details. - Drive Power: 45 kW- Motor Speed: 1,470 rpm- Motor Specifications: VEM motors GmbH, 45 kW, 400/690 V, 50 Hz- Rotor Diameter: 420 mm- Working Width / Rotor Width: 650 mm- Feed Opening: approx. 420 × 650 mm- Rotor Cutting Bars: 5 pieces- Stator Cutting Bars: 2 pieces- Enclosure / Features: Protective / soundproof enclosure, granulator function - Additional Equipment & Accessories: - Rotor Feature: Auxiliary flywheel fitted- Soundproof Booth: Segmented steel construction with 100 mm mineral wool insulation, forced ventilation fans, 3 access doors- Discharge & Extraction Station: Granulate extraction fan (5.5 kW motor, 230/400 V), cyclone ZA 160 with pneumatic material diverter, dust filter Credozwg Efspfx Apbsh

Year of construction: 2006, operating hours: 14,000 h, condition: used, functionality: fully functional, We offer a used Terex Fuchs MHL 320 material handler, manufactured in 2006. The boom with grapple has been refurbished, and new hoses have been installed. Excellent condition. Warranty included. Type and series: MHL 320 Serial number: 3201100680 Cjdpfxsy Uv Sro Apborh Permissible maximum weight: 19500 kg Year of manufacture: 2006 Permissible load on the front axle: 10000 kg Permissible load on the rear axle: 10000 kg Net power at the flywheel: 84 kW Standard operating weight: 19000 kg If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2006, functionality: fully functional, year of last overhaul: 2022, SCHULER GRÄBENER TMK 2-630 – 630 t Punching and Forming Press with Coil Feeding System Manufacturer: SCHULER / Gräbener Pressensysteme Type: TMK 2-630-3.0-50/210 S Year of Construction: 2006 Press Force: 6,300 kN / 630 t Design: Mechanical Punching and Forming Press / Single-Action Press For sale is a SCHULER GRÄBENER TMK 2-630 mechanical single-action press / punching and forming press with a press force of 6,300 kN, including a complete SCHULER automation strip guiding, straightening, and coil feeding system. The system was used for the mass production of punched and formed parts and is currently still fully assembled on site. Technical Data Press Rated Force: 6,300 kN Rated Stroke: 12 mm Stroke: 50–210 mm Stroke Rate: 15–60 strokes/min Max. Flywheel Speed: 960 1/min Ram Adjustment: 200 mm Max. Installation Height: 800 mm Table / Tooling Area: approx. 3,000 × 1,500 mm Max. Tool Dimensions: 3,000 × 1,500 × 800 mm Max. Tool Weight: 12,000 kg Drive Power: max. 280 kW Csdpszv Utnofx Apberh Rated Current: 420 A Compressed Air: 6 bar Hydraulic System: 400 bar Clutch / Brake: 6 bar Permissible Switching Rate Clutch / Brake: 16/min Machine Weight without Accessories: approx. 138,000 kg Coil and Feeding System SCHULER Automation / Gräbener Pressensysteme, Year of Construction 2006. Coil / Uncoiling Unit: Type AC-LH-160-0650 Strip Width: 40–600 mm Coil Outer Diameter: 900–1,800 mm Spreading Range: 470–530 mm Coil Uptake / Uncoiling Strip Guiding and Straightening System Threading / Strip Guiding Devices Automated Material Feeding Roller Guides Conveying / Removal Technology Complete Protective Enclosure Control / Operation SCHULER System Control Siemens SIMATIC Operating Components Siemens SIMATIC OP17 Touch Panel Separate Operating Panel for the Feeding System Setup Operator Devices Unidor Process / System Monitoring Condition and Maintenance The system was overhauled in 2022 for approximately €85,000. The maintenance history has been regularly recorded. Current maintenance and repair records are also available for 2026. The system is fully assembled on site and can be inspected by appointment. Scope of Supply The press system is sold, including the associated SCHULER automation and the existing coil, strip guiding, straightening, feeding, and removal technology, as well as the associated protective enclosure and operating / control devices, according to the existing system scope. Complete Service from a Single Source Upon request, we offer a complete project management service for this system – from financing to installation and commissioning at the new location. Possible Services: Individual financing and leasing solutions Organization and support for disassembly Heavy-load loading and transport International transport and export processing Organization of crane and heavy-load operations Reconstruction and assembly at the new location Support during commissioning Coordination of required service and specialist companies This allows the system to be taken over not only at the current location, but also as a completely organized machine project, depending on the customer's requirements. Location: Germany Availability: by arrangement Inspection: by appointment Disassembly / Transport / Reconstruction: can be completely organized upon request Financing / Leasing: upon request Technical data based on available documents and nameplates, subject to change and prior sale.

Condition: excellent (used), Year of construction: 2012, operating hours: 10,700 h, functionality: fully functional, The Jama SBU 8000 machine from 2012 is a robust and proven mechanical scaler, specifically designed for operation in demanding mining conditions, especially underground workings. This model is equipped with a hydraulic breaker for rock demolition, making it the perfect tool for removing loose rock fragments and preparing tunnels for further work. The listed machine comes fitted with an EPIROC breaker, including an additional new chisel. Codpfx Aewl Izaopbsrh Attention! At the dealer, the price of a brand new JAMY machine is as much as €903,000 NET! That is for the machine only, without any additional equipment such as a demolition hammer. - We have 2 identical SBU 8000 machines on offer. The one in this listing is from 2012, and the other is from 2008 and nearly €10,000 cheaper! Also available: JAMA machine for concrete spraying in tunnels Designed for finishing and reinforcement work in underground passages and tunnels High efficiency, precise spraying and large operating range Ideal for use in mining, tunneling and major infrastructure projects Key Technical Features – Jama SBU 8000 Weight: approx. 30,000 kg Dimensions: length 15 m, width 2.75 m, height 3.1 m Boom reach: from 3 m below machine level to 9 m above, and over 6 m sideways Operator cabin: complies with FOPS standards, fitted with an armored front window and hydraulically controlled explosion-proof guard Chassis: two axles, turning radius 5.2 m Stabilization: four stabilizing outriggers and a front dozer blade Safety system: 'Danger Mode' function allows rapid machine retreat in case of danger Operator Comfort and Ergonomics The operator’s cabin is designed for maximum comfort and safety: Operator seat: pneumatically suspended Controls: joysticks integrated in armrests Visibility: 13° tilting cab for improved worksite visibility Additional features: boot washer at the entrance, doors with gas struts enabling quick cab exit if necessary Currently, we have three similar machines available: 2x Jama SBU8000 – 2012 & 2008, both with EPIROC breakers 1x Jama machine for concrete spraying Technical Specifications – Deutz TCD 2013 L04 2V/m Engine type: Four-stroke, inline, 4-cylinder Displacement: 4.8 litres (4800 cm³) Bore × stroke: 108 × 130 mm Compression ratio: 18:1 Fuel system: Common Rail injection (DCR) or mechanical Maximum power: 104–129 kW (140–173 HP) at 2200–2300 rpm Maximum torque: 565–670 Nm at 1600 rpm Idle speed: 650–900 rpm Fuel consumption (at full load): 208–218 g/kWh Weight (without accessories): approx. 500 kg Cooling: Liquid Direction of rotation: Counterclockwise (viewed from flywheel) The price given is NET and applies for export and business customers. Significant discounts are possible for individual buyers – We invite you to contact us directly by phone to secure your best price :)

Condition: repair required (used), functionality: fully functional, mileage: 287,268 km, power: 132 kW (179.47 HP), first registration: 04/2010, fuel type: diesel, overall weight: 3,000 kg, tire size: 17 Zoll, color: grey, gearing type: automatic, emission class: euro5, number of seats: 9, Year of construction: 2010, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, power assisted steering, sliding door, traction control, trailer coupling, winter tires, ATTENTION – The engine has increased oil consumption and slight vibrations due to a defective dual-mass flywheel. The vehicle is therefore sold as defective without warranty. Cedpfx Apewmqdajbjrh The vehicle is fully roadworthy. The vehicle registration certificate has expired. Equipment: ABS, ASR, ESP, driver's airbag, passenger's airbag, third brake light, electrically adjustable exterior mirrors, electric windows, headlight range adjustment, fog lights, radio central locking and immobilizer, air conditioning, hands-free system, height-adjustable driver's seat with armrest, cup holder, power steering, leather-wrapped steering wheel, steering wheel adjustment, cruise control, CD-MP3 radio, sliding door on the right, rear hinged doors with window, rear window heater with wiper, winter tires, rubber cargo floor, cargo securing eyes, sliding window on the left, 17-inch tires, 17-inch chassis, trailer hitch, DPF EURO5 Total weight: 3000 kg, towing capacity: 2500 kg Subject to change and errors.

Condition: used, mileage: 213,500 km, power: 120 kW (163.15 HP), first registration: 03/2016, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, had accident, navigation system, soot filter, Transmission overhauled Clutch and flywheel replaced Special equipment: Crjdpfxoy U S Eno Apbsh Airbag for driver/passenger side, all-weather/all-season tires, Cool & Sound package, driving assistance package, rear wing doors (opening angle 270 degrees), wooden floor in the cargo area, fuel tank: 105 liters, cargo area protection with securing element, sound-insulating cargo area partition, cargo area partition with window, cargo securing strap, parking pilot system, rear step, door locking system (deadlock), lashing rails in the cargo area - on the side wall, lashing eyes in the cargo area, laterally, adjustable, lashing eyes in the cargo area, laterally Additional equipment: Exterior mirrors, electrically adjustable and heated, single tires on 2nd axle/rear axle, generator 185 A, high roof H2, permissible total weight 3.5 t, interior filter: pollen filter, body/superstructure: standard high-roof box van, body variant: vehicle length L3, body variant: high roof (H2), adjustable steering column (steering wheel), headlight range adjustment, engine 2.3 liters - 120 kW biturbo CDTI, wheelbase 4332 mm, medium wheelbase, spare wheel in driving condition, sliding door for cargo/passenger compartment on the right, side marker lights, seats in the driver's cab: double passenger seat, steel rims 6.5x16, start/stop system, permissible total weight 3.5 t.