Used Flywheel for sale (228)

Condition: new, - NEW -DESCRIPTION- Particularly smooth and precise running thanks to a torsion-free machine housing and a solid base made of sheet steel- Cast iron saw table with precisely ground and polished surface- Convenient laser device for cutting line marking- Quick saw blade tensioning via eccentric lever on the rear of the machine- Two speeds as standard- Precise 3-roller saw blade guides, as standard at the top and bottom- Quick cutting height adjustment via rotary knob and toothed rack with millimeter scale- Smooth-running aluminum parallel fence with quick eccentric clamping and magnifying glass- Angle fence as standard, adjustable by 60° on both sides- Safety switch for automatic switch-off when the door is openedTECHNICAL DATADimensions and weights- Length (product) approx.1020mm- Width/depth (product) approx.850mm- Height (product) approx.1982mmSuction connection- Suction nozzle diameter2 x 120mmWork table(s)- Work table length 535mm- Work table width 535mm- Work table height 945mm- Work table length max.685mm- Worktable extension length 535mm- Worktable extension width 150mm- Worktable inclination-10 - 45°- Explanation of worktable inclinationFor safety reasons, a holding device/stop must be fitted from 20° to prevent the wood from slipping!Electrical data- Supply voltage 400V- Mains frequency 50Hz- Output power 2.25kWCutting ranges- Cutting height max. 90°270mm- Cutting width max. with stop 474mm- Cutting width max. without stop 514mmSaw blade- Saw blade speed(s) 850 / 430m/min- Flywheel diameter 530mm- Saw blade length 3865mm- Saw blade length 3865mm- Saw blade length max.3872mm- Saw blade guidePrecision guide top and bottomSCOPE OF SUPPLY- Angle stop ±60°- Laser device for cutting line markingItem number: 5155303 Gsdpfxsvxr Nvj Afcekd

Condition: new, Year of construction: 2024, functionality: fully functional, Standard scope of delivery • Four-stroke gas engine based on MAN Individual cylinder heads with 4V technology, bottom-mounted camshaft and roller pushrods - Engine width: 1,243mm Gsdotpw Dfspfx Afcskd - Engine length: 1,748mm - Engine height: 1,500mm - Compression ratio 14:1, special gas - Speed 1500rpm - Oil module consisting of radiator, filter and crankcase ventilation One oil module per cylinder bank Crankcase ventilation is integrated at the factory • Oil pump in rotor pump design One oil pump per cylinder bank - Flywheel housing SAE 1 flywheel I = 2.49 kgm2 with ring gear - Starter 24 V / 7.0 kW • Camshaft with encoder disk for electric ignition system • Dry exhaust pipe with contact protection - Exhaust gas turbocharger with water-cooled turbine housing, water-cooled bearing bracket and pressure oil lubrication • Two-stage mixture cooler • Mechanical throttle valve without actuator upstream of mixture cooler - Lubricating oil pan with 102 l volume and filler neck • without thermostat housing • Cover for front crankshaft end - 2x exhaust gas temperature sensor - 1x coolant temperature sensor - inlet - 1x coolant temperature sensor - outlet - 2x oil pressure sensor - 2x oil temperature sensor - 2x connecting cable for exhaust gas temperature sensor, length 5 m - 4x connecting cable for temperature sensor, length 5 m - 2x connecting cable for oil pressure sensor, length 5 m • engine feet GS • Standard MAN factory approval with natural gas “H” • without Oil filling • engine openings with sealing cap • Type plate German / English • Paint, light gray RAL 7035 1x combined charge air sensor for pressure and temperature 2x exhaust gas temperature sensor 1x coolant temperature sensor - inlet 1x coolant temperature sensor - outlet 2x oil pressure sensor 2x oil temperature sensor

Condition: new, Stürmer Maschinen GmbH is launching a new generation of Holzkraft band saws. With innovative technology and sophisticated design, the new FBS models set standards in precision and versatility. Thanks to their sliding carriage and outrigger, these band saws are ideal for cutting beams, blocks, and insulation materials. Whether in prefabricated housing, the packaging industry, or paper processing – these machines offer a reliable solution for a wide variety of applications. Each model is available in various versions and can be individually tailored to specific requirements. We will work with you to develop the optimal solution for your production processes. Interested? Let our experts advise you! Technical specifications: Particularly smooth and precise operation thanks to the torsion-resistant machine housing Solid cast flywheels and chip scraper Gray cast iron saw table with ground and polished surface Smooth-running aluminum sliding table with telescopic crosscut stop and folding stops Aluminum parallel stop with round bar guide, easy to move High operating comfort thanks to the mobile control panel that can be moved within the working radius Gsdpfowa Srfox Afcekd Special saw blade guides at the top and bottom Saw blade tension indicator Integrated lubrication system with felt pads Precise cutting height adjustment via rack and pinion with millimeter scale Self-braking motor Automatic star-delta start The photos show examples of the different models. Please contact us for your specific requirements. Sold through authorized retailers.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH jaw crushers are designed to offer high durability and superior crushing performance, making them ideal machines for primary crushing operations in quarries and mines. They have the capacity to process a wide range of materials, from the softest limestone to the hardest types of granite and basalt. Their robust construction, high flywheel torque, and special jaw geometry ensure high-efficiency crushing of material into uniform sizes. The advanced hydraulic adjustment mechanism allows for easy adjustment of the desired output size and minimizes operator intervention. CONSTMACH jaw crushers ensure long-lasting use with their forged chrome-nickel steel pitman structure, heavy-duty bearings, and automatic lubrication systems. The welded main frame, which has undergone thermal stress relief treatment, maintains maximum durability even under high vibration. The user-friendly maintenance design provides an uninterrupted and safe working environment during production processes. These machines can be integrated into stationary or mobile crushing plants, offering high flexibility for projects. CJC-60 Technical Specifications Mouth Size: 600 x 380 mm Motor Power: 30 kW Shaft Speed: 330 rpm Weight: 6,000 kg Min./Max. Adjustment: 30 - 100 mm Production Capacity: 60 - 110 t/h Gkjdjxpkgdspfx Afced CJC-90 Technical Specifications Mouth Size: 900 x 650 mm Motor Power: 75 kW Shaft Speed: 277 rpm Weight: 11,400 kg Min./Max. Adjustment: 50 - 150 mm Production Capacity: 90 - 270 t/h CJC-110 Technical Specifications Mouth Size: 1,100 x 850 mm Motor Power: 132 kW Shaft Speed: 230 rpm Weight: 33,000 kg Min./Max. Setting: 60 - 200 mm Production Capacity: 150 - 420 t/h CJC-130 Technical Specifications Jaw Opening: 1,300 x 1,000 mm Motor Power: 160 kW Shaft Speed: 220 rpm Weight: 42,500 kg Min./Max. Adjustment: 100 - 280 mm Production Capacity: 275 - 790 t/h CJC-140 Technical Specifications Jaw Size: 1,400 x 1,100 mm Motor Power: 200 kW Shaft Speed: 220 rpm Weight: 52,000 kg Min./Max. Adjustment: 120 - 280 mm Production Capacity: 420 - 850 t/h Why Choose CONSTMACH Jaw Crushers CONSTMACH is a symbol of quality and reliability in crushing and screening technologies. Each jaw crusher model undergoes production processes that comply with international standards, ensuring maximum performance, low operating costs, and a long service life. With customizable design options tailored to customer needs and an extensive service network, it supports your business's uninterrupted production goals. In terms of reliable performance, engineering quality, and after-sales technical support, CONSTMACH is the right choice for crushing systems. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 230958, ram adjustment: 110 mm, table width: 1,120 mm, table length: 805 mm, pressing force: 250 t, stroke length: 140 mm, General condition: Used, good, fully functional Usage information: No dealers, machine ran on average less than 4 hours per day Godpfxjvb Up Ds Afcekd Delivery: the machine can also be dismantled and loaded - the additional costs are approx. € 1,450 TECHNICAL DETAILS Nominal forming force: 2,500 kN Clamping: 360 mm Stroke (changeable within the range): 30 - 140 mm Adjustability of the ram downwards: 110 mm Max. stroke rate: 45 rpm Usable stroke rate: 25 rpm Working path: 2.6 mm Clamping surfaces Clamping surface table: 1,120 x 805 mm Table top thickness: 110 mm Clamping surface ram: 800 x 475 mm Opening in the table top: ø320 mm Clamping opening in the Ram: ø410 x 560/320 mm Through hole in the table: ø65H7 / 105 mm Flywheel and motor Dimensions of the flywheel ring: ø1,300 x 280 mm Flywheel revolutions: 228/min Motor power: 22 kW Electric motor revolutions: 1,450 rpm MACHINE DETAILS Working voltage: 3 x 380 V Mains frequency: 50 Hz Compressed air connection: 0.4 – 0.6 MPa Air consumption per engagement of the clutch: 28 dm³ Machine dimensions (L x W x H): 2,660 x 1,350 x 2,975 mm Machine weight: 12,800 kg

Condition: used, Year of construction: 1953, machine/vehicle number: 66/53, pressure:36 t throat:280 mm stroke:6 - 82 mm Gjdjcxxwcspfx Afcskd ram adjustment:51 - 13 mm no. of strokes:6-82 Hub/min table surface area:530 x 480 mm Hole in clamping plate:Ø 140 mm clamping plate thickness:70 mm ram surface:200 x 200 mm clamping plate:530 x 450 mm dimensions of the machine ca.:1,0 x 1,65 x 1,80 m flywheel machine with DITTMER type PSK 103/B built in 1978, additional clamping plate 530 x 450 mm (thickness 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Condition: new, NEWPrecision band saws for theambitious craftsmenA particularly quiet and precise run thanks to onetorsion-free machine housing and onesolid base made of sheet steelGray cast iron saw table with precisely groundand polished surfaceComfortable laser device for cutting linemarkSaw band quick clamping via eccentric leveron the back of the machineStandard with two speedsPrecise 3-roller saw band guides,standard top and bottom from HBS 351Fast cutting height adjustment viaKnob and rack with millimeter scaleSmooth-running aluminum rip fence withEccentric quick release and magnifying glassStandard miter stop,adjustable on both sides by 60 °Safety switch for automaticShutdown when the door is openedEquipment detailsPrecision guidanceHBS 351 with 3-roller saw band guide at the topand belowWith leadership rolesEasily adjustablePractically maintenance-freeQuick release systemEccentric quick release leverThe basic voltage setting is therebynot h integrated saw band tension indicatorFlywheelsFlywheels with a special coating (HBS 351)The basic voltage setting is made via themade at the top of the rotary tableThe gray cast iron saw table is on a Wipp holder saw table inclination can be from -10 ° to + 45 °can be set play of the blade tensionSaw band tension display fordifferent saw band widthsReadable from the outside by a in the doorintegrated viewing windowPrecision guidanceFrom HBS 431 with precision saw band guidewith leadership rolesFine and fine adjustment above and belowTwo speeds via V-beltselectable adjustmentBalanced cast iron flywheelsgrant a quiet runAluminum rip fenceWith quick-action eccentric clamp, particularly easy and precise to moveEasy to read millimeter scale and integratedMagnifying glassSaw table double rocker bracketThe table inclination from -10 ° to + 45 ° takes place overprecise and smooth rack and pinion guidancewith pommelFor safety reasons, from 20 °a holding device / a stop may be attached,to prevent the wood from slipping!Technical specifications:Dimensions and weightsLength (product) approx. 820 mm Height (product) approx. 1852 mmWidth / depth (product) approx. 730 mmWeight (net) approx. 130 kgSuction connectionExtraction nozzle diameter 2 x 120 mmWork table (s)Working table length 610 mmWorktable inclination -10 - 45 °Working table width 431 mmExplanation of worktable inclinationFor safety reasons, a holding device / a stop must be attached from 20 ° to prevent the wood from slipping!Working table height 950 mmElectrical dataConnection voltage 230 VMains frequency 50 HzPhase (s) 1phOutput power 1.5 kWCurrent type ACCutting areasCutting height max. 90 ° 270 mmCutting width max. without stop 410 mmCutting width max. with 370 mm stopSaw bandSaw band speed (s) 900/450 m / min3-roller saw band guidePrecision guidance above and belowSaw band length 3345 mmscope of deliveryAngle stop ± 60 °Laser device for cutting line marking1 x saw band wood 3345 x 6 x 0.65 mm Gksdpfxevwgbdo Afcjd

Condition: new, Year of construction: 2024, type of input current: three-phase, overall weight: 2,150 kg, total width: 2,400 mm, total height: 1,700 mm, total length: 12,000 mm, transport length: 6,000 mm, input voltage: 400 V, tooth pitch: 22 mm, cutting height with scoring (max.): 760 mm, saw band width: 40 mm, saw blade length: 4,867 mm, track width: 1,060 mm, wheel diameter: 550 mm, pass-through height: 400 mm, Horizontal log band saw 11 kw electric motor (15kw option) Wood diameter up to 1'10m - max. opening between rollers = 1.02m Clearance above blade 400mm 550mm flywheels - 35 or 40mm x 4867mm blades - 22.225mm pitch Rail length 12.00m - sawing 10m Basic price for machine delivered in mainland France (based on Lyon region) = 23'900€ HT (to be validated according to zip code) Delivery time 8/10 weeks. Options: bark incisor (800€ ht), SELBIT ISP-10 electronic splitter (850€ ht) and hydraulic pack (9'000€ ht) Prices for options delivered at the same time as the TTM-1100 saw. Sharpening package (automatic sharpener + manual sharpener) from €1,900 (excl. VAT) when purchased with the saw. Special offer AUTUMN 2024 - valid until 30/11/2024 Gjdjunhzcepfx Afcjkd

Condition: new, Kyori High-Speed-Press VX40-W with Siemens-Control Technical specification: tonnage: 400 KN drive: flywheel with dynamic balancer feeding direction: right to left color: Kyori white RAL 7035 position of main drive: right ram adjustement range: 50 mm shut height : 240 mm max. upper die weight: 180 kg safety doors: front and back tool load area light: 2 LED-lights Gksdet Upvbjpfx Afcod bolster area (LxW): 950 x 600 mm bolster design: T-slot bolster material: steel bolster thickness: 120 mm base plate opening (LxW): 760 x 120 mm ram area (LxW): 950 x 450mm ram design: T-slot dimensions: 2120 x 1400 mm total height: 3170 mm weight: (approx.) 9.500 kg strip inlet height: has to be defined strip inlet width: max. 300 mm feed: Vamco SR-150

Condition: as good as new (ex-display), Year of construction: 2024, cutting width (max.): 1,150 mm, wheel diameter: 1,150 mm, Equipment: cabin, HORIZONTAL WRC 1150 WRAVOR AC (Main motor on the right) Gjdohwmg Repfx Afcokd Chassis of 14M Possibility of longer lengths 37KW main motor saw head. Possibility of 45 or 55 KW motor depending on the species to be worked - Wheels / flywheels diam. 1150mm - FUNCTIONAL STEEL / FULL PROFILE, FIXED ON BOTH SIDES - STABLE CONSTRUCTION -Complete hydraulic equipment: Hydraulic spindles & rollers, new generation of ball bearing centering units (V: cradle, WRAVOR patent) - SIEMENS dividing system + WRAVOR program - FAST AND PRECISE SAWING - HIGH TECHNOLOGY, SELF-GRAZING SYSTEM, SELF-CLEANING SYSTEM, SPECIAL PRESSURE BLADE GUIDES, FAST AND PRECISE SAWING - HIGH TECHNOLOGY. SPECIAL PRESSURE BLADE GUIDES, QUICK ROTATION OF THE LOG ON THE FRAME TECHNICAL DATA: diameter of main wheels: 1150 mm width of main wheels: 125 mm max. diameter of the log: Ø 1150 mm cutting length: according to the demand length and width of the blade: 9045 / 160 mm cutting capacity: up to 45 m3 / 8h* Other WRAVOR horizontal platforms available: WRC 1050 AC, WRC 1250 AC OPTIONS: ventilation system, outfeed tables, loading logdeck... 2.MULTILAME CIRCULAR SAWS Type 750 (amerikaner) 20/ 100 to 160 - one fixed head, 2 to 3 heads one fixed head, 2 to 3 mobile heads (important : greasing of the shaft 3x a day & cleaning) Main motor 22 to 55 Kw min/max cutting height 20mm/160 mm max diameter of circular blade Diam 500 mm Max number of blades 8 pcs Max width of the cutting board, which goes to the machine: 1000 mm Max parallel cut 600 mm Hydraulically adjustable roller according to the thickness of the board, up 2 pcs lifting of the roller up/down with accumulator (shock absorber) automatic control with frequency regulator for el. 1,1kw motor ...several models available for different thicknesses and cutting widths

Condition: new, Thomas Super Trad 301 So Easy - Semi-automatic metal band saw Promotional price € 9,400 instead of € 11,100 excl. VAT - The SO EASY saw allows a complete cutting cycle without the operator being constantly present thanks to the hydraulic control system for lowering the saw frame - Hydraulic vice - Limit switch for adjusting the saw frame return directly above the material to be cut - Selector switch for switching to MANUAL cutting mode with button for quick access to the material to be cut - Central control panel on the front of the machine with luminous alarm system - Automation is controlled by a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting needs of medium-sized ferrous materials - Large round work table "plateau" that rotates with the miter of the saw blade and guarantees excellent support for the material to be cut. This system prevents the saw blade from cutting the work table, as is the case with conventional band saws. - Solid cast iron vice with handwheel and quick release lever - The vice is equipped with a practical handle for quick movements and is mounted on a rail to allow lateral movement - Cuts possible from 0 ° to 60 ° to the right and 45 ° to the left - Saw blade rotation with 2 electric speeds - Saw blade tensioning by handwheel and safety microswitch in case of blade breakage or insufficient blade tension - Coolant electric pump - Saw blade cleaning brush Specifications - Capacity round 0 °: 255 mm - Capacity round < 45 °: 160 mm - Capacity round 45 ° >: 200 mm - Capacity round 60 ° >: 110 mm - Capacity square 0 °: 250 mm - Capacity square < 45 °: 160 mm - Capacity square 45 ° >: 190 mm - Capacity square 60 ° >: 110 mm Gedpfx Afsuzhpzjcskd - Capacity rectangle 0°: 300 x 220 mm - Capacity rectangle < 45°: 190 x 100 - 150 x 170 mm - Capacity rectangle 45° >: 190 x 170 mm - Capacity rectangle 60° >: 110 x 130 mm - Saw band dimensions: 2750 x 27 x 0.9 mm - Saw band speed: 33/66 m/min - Vice clamping width: 305 mm - Saw frame inclination: 30° - Working height: 940 mm - Gearbox reduction ratio: 40/1 I - Flywheel diameter: 300 mm - 3Ph electric motor: 1.0 - 1.4 kW - Electric pump: 0.11 kW - Machine dimensions WxHxD: 800 x 1600 x 1800 mm - Machine weight: 440 kg

Year of construction: 2006, condition: reconditioned (used), TECHNICAL FEATURES: Press Model: T35 TL/V-SM Serial number: 11970306 Year of construction: 2006 Nominal force: kN 350 Test date: 23/05/06 Adjustable stroke: mm 11÷78 Strokes per minute: n°122 Slide adjustment: mm 50 Light at bottom dead centre: mm 275 Max. grafts per minute: n°35 Max revs flywheel: n°122 Weight: 2,700 kg Min. air pressure: 6.5 bar Clutch pressure: 5.5/6.0 bar Braking angle: 55° Stopping time: 247 ms Max. mold dimensions: B=280 x L=240 x H=180 Max. moving part weight: Kg 40 Nominal pressure: KN 350 at 2mm at 120 strokes/min Gkodpfx Afsmhhdbjced Machine Stop: TDC (Top Dead Center) Complete with user manual and CE conformity Six (6) months warranty excluding electronic parts. NEW COMPONENTS INSTALLED: • Front safety guard with safety keys.

Condition: new, - new -manufactured by Holzkrafttype HBS 633 S SETDescription:- Heavy profile design with high dead weightFor maximum running- Quiet and precise running thanks to torsion-freeMachine housing- Large-scale gray cast saw tableOne piece, tiltable from 0 ° to + 45 ° withPolished and polished surface- Large cast parallel connection- Quick and precise cutting height adjustmentHand wheel and rack with millimeter scale- Standard with angle stop- Precision 3-roll saw blade guide with guide rollersTop and bottom, with fine adjustment- Eccentric quick-release lever. The basic voltage settingIs not altered, with integrated blade-voltage indication- The saw table is mounted on a double tilt support,Easy and fast fixation of the setTilt angle over fast tension- Eccentric quick-release lever- The basic voltage setting is not changed- With integrated saw band tension indicator- The massive saw blade made of gray cast iron is light and comfortableVia a handwheel rack and pinion guide- The inclination is infinitely adjustable from 0 ° to 45 °- Easy and fast fixing of the adjusted tilt anglequick releaseTechnical specifications:Working table dimensions 830 x 600 mmCutting speeds 1615 m / minFlywheel Ø 630 mmMax. Cutting height 400 mmMax. Cutting width with stop 570 mmMax. Cutting width without stop 610 mmBand saw blade length 4600 mmPrecision guide up / downSawing table inclination 0 to +45 °Motor power 400 V / 50 Hz / P2 3.75 kWWeight 380 kgDimensions 1190 x 750 x 2060 mmSuction nozzle diameter 2 x 100 mmItem No. 5156303SETlocated in 97447 Gerolzhofen- free on truck - Gkedpfxovwf Tlo Afcsd

Condition: new, Used MACC SPECIAL 411 CSO Gravity descent bandsaw New CE Gedsficb Tjpfx Afcokd The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, band guides, band tensioning) have been carefully studied to avoid the yielding of the band, increase its duration, improve linearity and cutting time. - Sawing machine with cut by falling arc regulated by a hydraulic circuit, manual bar feeding and vice closing, manual head return. - Vertical rotation on pivot with adjustable conical bearings without backlash - Band control with two-speed motor and special reducer with bronze gear and hardened and ground worm screw - Appropriately sized flywheels - Sturdy belt guides made of watertight bearings and adjustable widia plates - Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control - Vice with rapid approach device - Accident prevention safety device on the flywheel cover, on the control knob and on the blade - Hydraulic cylinder for controlled descent - Cutting thickness 1,2 mm - Cutting range 45° left 60° right - Adjustable stop for cuts of the same size - 24 V low voltage system - 0.06 kW electric pump for belt cooling - Pedestal with drawer for chips collection and extractable tank for the cooling liquid - Machine predisposed

Condition: new, Year of construction: 2024, Kyori High Speed Press VX50-1100 with variable stroke adjustment Technical specification: tonnage: 500 KN drive: flywheel with dynamic balancer feeding direction: right to left colour: Kyori white RAL 7035 position of main drive: right ram adjustment range: 55 mm shut height max.: 290 mm max. upper die weight: 300 kg (higher upper die weight is possible with reduced performance) safety doors: front and back tool load area light: 2 LED lights Bolster area (LxW): 1100 (1140) x 600 mm Bolster design: T-slot Gkedpfx Afotndfrjcod Bolster material: steel Bolster thickness: 220 mm base plate opening (LxW): 00 x 160 mm ram area (LxW): 1100 x 420 mm ram design: T slot dimensions: 2300 x 1600 mm total height: 3750 mm weight: (approx.) 14,000 kg strip inlet height: has to be defined strip inlet width: max. 280 mm cooling system: liquid cooling system, for electrical cabinet;AC servo main drive and machine oil Press control with the following features: - 15" touch screen with stand. - User-friendly visualized menu navigation - Data import/export - Energy safe / night shutdown - Three-level energy options - User administration - Error log - High resolution coding system - Tool changeover including stored process parameters - TDC shutdown with brake angle calculation over entire speed range - Oil and air pressure display including monitoring - Integration of the press into a process chain via peripheral interfaces -Ethernet interface - USB interface - Backup function - Test stroke - Reverse run - Increased working capacity, i.e. reduction of speed to 80 strokes/min. - Quick lift including automatic approach to quick lift position and the shut height in set-up and continuous mode - Stroke change menu driven - Detection of the working stroke after stroke change with SET/ACTUAL comparison - UPS - for fail-safe operation - Absolute ram position display - Punching area protection with non-contact safety switches - Beckhoff "Twincat 3.1" control system - Beckhoff "TwinSafe" safety controller - water-cooled, for cooling the control cabinet and AC servo main drive * for stable production with fluctuating environmental influences such as heat * minimal heat dissipation inside the sound enclosure due to main drive * no suction and swirling of punching oils and particles through main drive - all electrical cables, connectors, control elements, are professionally installed - Remote support Team Viewer - Internet access through integrated Ethernet interface - Interlinked EMERGENCY STOP function - Extension of the press control for further SYS products on request - Integrated service counters for programmable maintenance intervals and maintenance instructions - 8 customer-specific error messages - 2 peripheral interfaces including power supply *Harting Interface 16A *Harting Interface 32 A - SCHUKO socket outlet 230V 10A

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, cutting length (max.): 6,000 mm, cutting width (max.): 1,050 mm, Versatile HORIZONTAL SAWMILL, DOUBLE CUT / in WRC 1050 "VENEER" version AUTOMATIC CUTTING and specific of THIN VENEER SLATS • Frame length: 11M for 6.5M log length, possible extensions • DOUBLE CUT SAW HEAD with adjustable mobile pressure guides to hold the blade during cutting. • STATION & CONTROL SYSTEM SEPARATE from the saw bench TO BE POSITIONED ACCORDING TO THE PLAN TO BE DEFINED – on the existing site, open station with or without seat integrating the control system • 45KW MAIN MOTOR WITH FREQUENCY INVERTER option • WORM SCREW provided in each of the side pillars / or 2 worm screws / with or without FREQUENCY INVERTER for faster up and down movement and more precise Gkodpsvtqtvsfx Afcsd • MORE POWERFUL HYDRAULIC GENERATOR ON THE CHASSIS: 18KW + 200L TANK + FREQUENCY INVERTER - so that the hydraulic equipment on the chassis moves faster • FastSmartCut CONTROL SYSTEM, SCHNEIDER 4.0 base, / WRAVOR PROGRAM / 2 joysticks + touch screen is encrypted instead of the initial standard PLC 1040 system • Automatic HANDS sawn timber thrust - including the GUILLOTINE option which is priced: vertical arm for DIFFICULT timber, for more SPEED • 1 CAMERA - 1 screen, additional cameras possible as an option • HYDROFOR COOLING SYSTEM • LUBRICATION SYSTEM - in ELECTRIC version or mechanical pump • 5 pairs of hydraulic SPINDLES, including the option with hydraulic cylinder • 5 hydraulic ROLLERS up/down movement • 3 NEW CENTERING DEVICES (not at 90° angle) new generation • 3 NEW LOG TURNERS, new generation, V system (cradle) • ELECTRICAL wiring: flat cables, cased in a chute • SILON BELT output belt, 4M, automatic up/down movement controlled from the control system • Sawdust EVACUATION system by ZIPPER: by capture (vacuum cleaner on the frame) as close as possible to the cutting blade and possible connection with the existing EBT suction circuit: completes the VENEER system, more powerful than the standard • The CABLE SAW head traction system, SEW Asynchronous system for greater speed and precision: optional Differences between the standard horizontal saw bench and the specific saw bench for veneer: the saw has the following adapted equipment: - a reinforced fairing at the head to prevent any intrusion of sawdust between the flywheel and the blade. - additional protective shields due to more powerful and voluminous sawdust extraction - double-cut blade - graphite blade guides (bakelite for the standard model) - special system for changing graphic blade guides - special protection of the chassis and sensors, plexi in the cover (different design of the saw head cover compared to the standard band saw) - additional sensors for blade deviation - pneumatic jet cleaning for the entire length of the saw bench OPTIONAL add-ons on request

Condition: new, The rotary type cleaning unit allow to process parts directly on board the work-cells avoiding costly transport operations. The transfer of the components takes place with an in-built rotary index transfer system which guarantees satellite positioning at loading / unloading and inner operations. Considerable flexibility in the change of costumized jigs as components holders. Gsdpfx Aswdfyqefcjkd Elimination of packaging costs and transport costs Re-equipment of the plant in a very short time Number of satellites to be selected in accordance with a defined and accurate washing, blowing and drying process; These plants are fit for the treatment with aqueous detergent solutions, as: Critical machined parts and delicate parts with blind holes and threaten holes, compoenent as: valve bodies, automatic actuators, burner bodies, water meters, friction flywheels, gas valves, hydraulic, pneumatic multichannel distributorss. a.s.o.).

Condition: new, Description: High precision and stability for the highest cutting quality Smooth belt running thanks to balanced flywheels with rubber coating Adjustable HSS precision three-roller guide for the saw blade top and bottom for exact cutting results Two cutting speeds for different applications and materials Precise parallel stop with double clamping and quick fixation Quiet induction motor, maintenance-free and robust Restart protection: prevents unintentional start-up after a power failure Convenient tilt adjustment of the gray cast iron saw table for precise tilt cuts thanks to gear rim guide Quick release lever and tool-free door opening for easy saw blade changes Blade tension indicator with scale for checking the blade tension Tool-free height adjustment of the saw blade guard LED work light to illuminate the interface Godpfx Ajvwf Naefcskd External suction possible for low-dust work Drawer for easy disposal of the collected sawdust Extendable table extension for safe processing of large Workpieces Cutting radii with circular cutting device (accessory) Regrinding surfaces and curved saw cuts with belt grinding device (accessory) Base frame with wheels for comfortable position changes Technical data: Dimensions: 665 x 980 x 1600 mm Support surface: 560 x 400 mm Working height with base frame: 1000 mm Saw table swivel range: 0 - 45 ° Cutting height: 170 mm Passage width: 307 mm Cutting speed: 410 / 880 m/min Saw band length: 2240 mm Nominal input power: 900 W Output power: 660 W Weight: 79 kg Scope of delivery: Band saw BAS 318 Precision DNB Universal band saw blade A6 Base frame Parallel stop Angle stop Extraction adapter (for Ø 44, 58, 100 mm) Dust container Push stick

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Gkodpjfh R Tuofx Afcod Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Machine weight 1250 kg 12260 N

Condition: new, Year of construction: 2024, functionality: fully functional, Kyori High Speed Press VX50-1500 with variable stroke adjustment Tonnage: 500 kN Drive design: flywheel with dynamic balancing Strip running direction: possible on both sides Main drive position: right Ram adjustment range: 55 mm Shut height standard: 300 mm Max. upper die weight: 300 kg Safety doors: front and back Work area lighting: 2 LED lights Bolster (LxW): 1500 x 600 mm Bolster thickness: 210 mm Bolster plate: T-slot pitch Bolster material: steel Press bed opening (LxW): 1200 x 160 mm Bridge in machine bed: No Ram size (LxW): 1400 x 420 mm Machining ram: 90 slot pitch Dimensions: 2311 x1835 mm Total height: 3780mm Press weight: (approx.) 14,500 kg Strip inlet height: 100 - 140 mm Strip inlet width: max. 280 mm Possible feeds: PV30-200 Cooling: water cooled, for cooling of control cabinet; AC servo main drive; as well as machine oil; connection to existing hall cooling system Press control with the following features: - 15" touch screen with stand. - User-friendly visualized menu navigation - Data import/export Gkodpjwhk Dpjfx Afcod - Energy safe / night shutdown - Three-level energy options - User administration - Error log - High resolution coding system - Tool changeover including stored process parameters - TDC shutdown with brake angle calculation over entire speed range - Oil and air pressure display including monitoring - Integration of the press into a process chain via peripheral interfaces -Ethernet interface - USB interface - Backup function - Test stroke - Reverse run - Increased working capacity, i.e. reduction of speed to 80 strokes/min. - Quick lift including automatic approach to quick lift position and the shut height in set-up and continuous mode - Stroke change menu driven - Detection of the working stroke after stroke change with SET/ACTUAL comparison - UPS - for fail-safe operation - Absolute ram position display - Punching area protection with non-contact safety switches - Beckhoff "Twincat 3.1" control system - Beckhoff "TwinSafe" safety controller - water-cooled, for cooling the control cabinet and AC servo main drive * for stable production with fluctuating environmental influences such as heat * minimal heat dissipation inside the sound enclosure due to main drive * no suction and swirling of punching oils and particles through main drive - all electrical cables, connectors, control elements, are professionally installed - Remote support Team Viewer - Internet access through integrated Ethernet interface - Interlinked EMERGENCY STOP function - Extension of the press control for further SYS products on request - Integrated service counters for programmable maintenance intervals and maintenance instructions - 8 customer-specific error messages - 2 peripheral interfaces including power supply *Harting Interface 16A *Harting Interface 32 A - SCHUKO socket outlet 230V 10A

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. Gjdpfx Afefibd Tecjkd The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold Gksdpofibfasfx Afced The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Gsdpfsfh R Tyex Afcjkd Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Godog S Ui Aepfx Afcjkd

Condition: new, Good brand new No. 1 available for immediate delivery! Warranty " CE " Made in Italy Cutting capacity : Gksdpfx Afofibfgjcjd 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Vice with rapid locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V 0.06 kW electric pump for belt cooling The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.