Used Flywheel for sale (163)

Condition: new, mileage: 100 km, power: 302 kW (410.61 HP), fuel type: diesel, brakes: retarder, color: red, gearing type: automatic, loading space length: 5,325 mm, loading space width: 254 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Car transporter for transporting 3 vehicles: Chassis: Scania R410 4x2 * Low frame height * 2 x 315 liter aluminum tanks * Automatic transmission * Power take-off unit on the flywheel Iaodpfxsxpz I Ss Aadon * Tires: 295/60 R22.5 * Retarder R4100D * AEB - Advanced Emergency Braking * Disc brakes * Roof spoiler * Sliding roof Body (chassis): Truck body for transporting 1 vehicle * Flatbed dimensions: approx. 745 x 255 cm * Loading height from ground: 82.5 cm (at lowered sections) * Loading height above rear axle: 100 cm * Hydraulic cable winch with remote and cable control * Body fully hot-dip galvanized Trailer: * BLYSS - Trailer for 2 vehicles or vans * GVW 18,000 kg * Loading area: approx. 830 x 255 cm * Loading height: 83.2–88.7 cm * Retractable extension at the trailer approx. 150 cm (load support) * Hydraulic telescopic drawbar * Aluminum loading ramps * BPW axles * Twin tires 225/35 R19.5 * ABS brakes * Trailer equipped with perforated driving plates * Vehicles can be secured in any position according to DIN (VDI 2700 8.2) * Trailer fully hot-dip galvanized Load securing according to VDI 2700 8.2 also available from us: * Lashing and tension straps * Load bars * Safety vests * Transport boxes * Edge protectors * Dunnage bags * Wheel chocks * etc. Financing and leasing available We manufacture superstructures of any size and type for any chassis. Tarpaulin, GRP sandwich, aluminum. Visit us at: Superstructures – Complete vehicles – Trailers – Consultation – Financing Subject to prior sale and confirmation, no liability for typographical or input errors.

Condition: ready for operation (used), Technical characteristics Cast iron table 1100 x 1000 mm fixed Motor 3 kW Pedal brake Solid flywheel Iaedpfx Aajt Umawodjn Blade width 30 mm max Blade guide Protector Cast iron rip fence Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Cast-iron frame Solid flywheel diameter 930 mm Max. cutting height : 550 mm Max. cutting width : 910 mm Blade dimensions : 6580 to 6670 x 90 x 0.9 mm Blade guide Cast-iron table dimensions : 860 x 1100 mm Table inclination : 0 to 20 degrees 11 kW (15 hp) motor Robust, enclosed machine 2 suction nozzles diameter : 140 mm Steel toothed feeder Power and Motors Isdpfoupbn Sjx Aadjan Voltage: 400 V Pluging: Three-phased Power: 12 Kw Motor: 15 CV Overall dimensions Lenght: 1880 mm Height: 2860 mm Weight: 990 Kg

Condition: used, mileage: 99,450 km, power: 368 kW (500.34 HP), first registration: 09/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 4,200 mm, brakes: intarder, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, with equipment at premises, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, ABS (anti-lock braking system), traction control (ASR), retarder, automatic transmission, lift and lower function, differential lock, fog lights, leaf-air suspension, hydraulic cross locking, roof hatch, EBS (electronic braking system), green environmental sticker. Wheelbase: 4200 mm. Body: 20t Hyva 20-57-S hook lift system for containers up to 6.7m. Engine: D2676LF51 - 500 HP / 368 KW EURO6 SCR - 2500 Nm C-R OBD-C. Transmission: ZF 12 TX 2821 OD. Fuel tank: 400l right and 35l AdBlue. MAN BrakeMatic (electronic brake system), drum brakes. 050NN cab 'M' 2240mm wide, 1880mm long. PTO at flywheel side with pump connection, key spline profile DIN ISO 14 - 8x32x36 f=1.233. Frame length from cabin approx. 6250mm. Iasdpfjxn Auwsx Aadon ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: used, machine/vehicle number: 12727, Rotor diameter: 300 mm Rotor width: 900 mm 3-knife rotor 2 rows stator knives Inlet cross section approx. 300 x 900 mm Drive motor: 30 kW Iaedsl A Azvopfx Aadsn incl. flywheel

Condition: new, machine/vehicle number: GSH, The ZERMA GSH series granulators are extremely stable machines for the toughest demands and tailored to the versatile requirements of a modern recycling operation. The housings, manufactured in heavy steel/welded construction, withstand even extraordinary loads. Bearing, blade mounting and rotor shaft are far oversized and therefore extremely resilient. By simple retooling, massive lumps and thick-walled pipes as well as hollow bodies and foils can be shredded effortlessly. Iasdpfxjghgflo Aadon Depending on the individual task (and also for temperature-sensitive materials), different rotor variants are available, but they all have one thing in common: the modern and superior V-cut technology. All machines of the GSH series always deliver a high-quality regrind - whether from bottle crates, profiles, sheets, foils, or start-up lumps and tubes. They are economical, very reliable, easy to clean, and have a long service life. In combination with the extensive range of ZERMA options, accessories (such as extraction systems, conveyor belts, metal detectors, fines separators, roller feed systems, etc.) as well as spare parts, an individually optimized size reduction system is created. The advantages are shown in a considerably reduced effort in terms of costs, time and personnel. Sophisticated housing design The housing is divided diagonally in the middle and the upper part with feed hopper can be opened hydraulically so that the rotor is completely exposed for knife changes and cleaning. The sieve insert is also held by a hydraulically swiveling sieve basket, and accessibility is thus optimal for removal and installation of the sieve. Reversible sieve insert. Robust external bearing Another well thought-out design feature is the bearing arrangement outside the machine. Robust roller bearings in steel bearing housings guarantee a long service life and are ideal for the toughest conditions. The external bearing prevents grease from entering the grinding chamber, and vice versa, grinding material or fines from entering the bearing. This is another significant advantage, especially when the machine is operated in wet conditions. Flywheel In order to compensate for shock loads during comminution, a flywheel is available as an option. For attachment, the rotors have a second shaft end as standard. High operational reliability All granulators comply with EC machinery directives and are CE marked. Accident safety is ensured, for example, by overrun protection devices with limit switches and hydraulically unlockable check valves.

Condition: used, mileage: 478,442 km, power: 265 kW (360.30 HP), gearing type: mechanical, fuel type: diesel, color: white, overall weight: 32,000 kg, empty load weight: 14,395 kg, maximum load weight: 17,605 kg, tire size: 315/80R22.5, axle configuration: 8x4, number of seats: 2, first registration: 01/2005, next inspection (TÜV): 07/2024, emission class: euro3, brakes: engine braking, suspension: steel, loading space volume: 10 m³, driver cabin: day cab, Equipment: ABS, additional headlights, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, Vehicle location: Bovenden, Mtlg. Haus, 1x comfort seat, heated seats, rear window, electric mirror, heated mirror, electric window left, electric window right, sun visor, cruise control, switch 16, ABS (anti-lock braking system), constant throttle, auxiliary drive, raised exhaust, differential lock, leaf spring suspension, low noise G1, 2 axles with pre-steering, U-protection, side aluminum undercarriage, roof hatch, yellow environmental sticker Structure: Concrete mixer Karrena approx. 10m³ gearbox ZF 16 S 182 OD, M-driver's cab, auxiliary drive on flywheel side. ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Iedpfxsvy A Npe Aadjan - .

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 35,000 kg, axle configuration: 8x8, wheelbase: 4,775 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, house registration, 1x comfort seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), constant throttle, PTO, automatic, differential lock, fog lights, work lights, leaf suspension, trailer hitch air+light, hydraulic transverse locking, green environmental sticker Wheelbase: 4775 mm. Body: 26t Hyva T26-55-S hooklift system for containers from 4.3m to 6.6m. Gearbox ZF 12.28, ABS, EBS, MAN EVBec high-performance engine brake, drum brakes on all axles, emergency brake assist, air conditioning, MAN EasyStart, ESP, differential lock on all axles, LED daytime running lights, lower radiator protection, high build, KSM module, cool box, PTO, engine dependent, flywheel, spline hub 8x32x36 (DIN ISO 14), f=1.233, 650/720 Nm continuous/short! Frame length approx. 6400mm! Frame height approx. 1210mm! Upon request and for an extra charge, also available with a different hooklift system! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! Iodpfewnp D Isx Aadean - .

Condition: used, mileage: 586,899 km, power: 301 kW (409.25 HP), gearing type: mechanical, fuel type: diesel, color: blue, overall weight: 35,000 kg, empty load weight: 14,300 kg, maximum load weight: 20,700 kg, tire size: 315/80R22.5, axle configuration: 8x4, number of seats: 2, first registration: 01/2005, next inspection (TÜV): 07/2024, emission class: euro3, brakes: engine braking, suspension: steel, loading space volume: 10 m³, driver cabin: day cab, wheelbase: 4,300 mm, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, Vehicle location: Bovenden, Mtlg. Haus, 1x comfort seat, heated seats, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, switch 16, ABS (anti-lock braking system), constant throttle, auxiliary drive, raised exhaust, differential lock, leaf spring suspension, low noise G1, 2 axles with pre-steering, U-protection, side aluminum undercarriage, roof hatch, yellow environmental sticker Wheelbase: 4300 mm Structure: Concrete mixer Karrena approx. 10m³ gearbox ZF 16 S 182 OD, M-driver's cab, air conditioning, auxiliary drive on flywheel side. ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - . Iajdpfxovy A Nij Aadjn

Condition: used, mileage: 99,450 km, power: 368 kW (500.34 HP), first registration: 09/2020, fuel type: diesel, empty load weight: 11,000 kg, maximum load weight: 15,000 kg, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 4,200 mm, brakes: intarder, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Mtlg. Haus, 1x comfort seat, heated seats, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, ABS (anti-lock braking system), traction control (ASR), retarder, automatic, lifting + lowering, differential lock, fog lights, leaf air suspension, roof hatch, EBS, green environmental sticker Wheelbase: 4200 mm Structure: Frame length from cab approx. 6250mm. Engine D2676LF51 - 500 HP / 368 KW EURO6 SCR - 2500 Nm C-R OBD-C, gearbox ZF 12 TX 2821 OD, fuel tank 400l right and 35l AdBlue, MAN BrakeMatic (electronic braking system), drum brakes, 050NN driver's cab 'M' 2240mm wide, 1880mm long, power take-off on flywheel side with pump connection splined hub profile DIN ISO 14 -8x32x36 f=1.233! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - . Ijdpfxevq I Dtj Aadsan

Condition: new, Year of construction: 2024, power: 3 kW (4.08 HP), empty load weight: 280 kg, saw band length: 4,080 mm, space requirement height: 2,000 mm, space requirement length: 1,150 mm, space requirement width: 930 mm, table length: 860 mm, table width: 550 mm, Closed base with high stability Safe and smooth saw cuts in wood Heavy, tilting cast-iron work table with polished surface Powerful motor Iajdpfxjtp Hbvo Aadjn Safety switch stops the machine when the door is opened and prevents unintentional restarting and starting Cast iron flywheels ensure smooth running Set cutting width can be easily read on a scale

Condition: new, Holzkraft HBS 513 S wood band saw Precision saws with great cutting performance for the professional. Heavy-duty design with high dead weight for maximum running smoothness Particularly quiet and precise running thanks to torsion-resistant machine housing Precisely adjustable aluminum parallel fence Cast flywheels with rubber coating and chip scraper brush Large cast iron saw table, swivels from 0° to +45° with ground and polished surface Precise cutting height adjustment via toothed rack with millimeter scale Two suction ports Automatic release of the saw band brake to adjust the saw band. TECHNICAL DATA: Dimensions and weights Length (product) approx. 1150mm width/depth (product) approx. 950mm Height (product) approx. 2000mm Weight (net) approx. 295kg Connection suction suction connection diameter 2 x 120mm Work table(s) working table length 640mm working table width 500mm Work table height 920mm Work table extension length 150mm Work table widening width 500mm working table inclination 0 - 45 Supply voltage 400V Mains frequency 50Hz output power 3,5kW Cutting range Isdeg Hzw Tspfx Aadoan cutting height max. 90°350mm Cutting height max. 45°200mm Cutting width max. with fence 415mm Cutting width max. without fence 500mm Saw band speed(s) 1320m/min Flywheel diameter 510mm Saw band length 4100mm Saw band width 25mm Saw band width max. 38 Saw band thickness 0,6mm Saw band guide High quality, fixed saw band guide SCOPE OF DELIVERY: Angle stop Saw band Sliding stick Holzkraft dealer - please send us your inquiry

Condition: new, Holzkraft HBS 433 action set wood band saw For the craftsman. TOP in quality, workmanship and price-performance ratio. Particularly smooth and precise running thanks to a torsion-free machine housing and a solid base made of sheet steel. Cast iron saw table with precisely ground and polished surface Convenient laser device for cutting line marking Quick saw blade clamping via eccentric lever on the rear side of the machine Two speeds as standard Precise 3-roller saw band guides, top and bottom as standard Fast cutting height adjustment via rotary knob and toothed rack with millimeter scale Smooth-running aluminum parallel fence with eccentric quick clamping and magnifying glass Standard angle stop, adjustable 60° on both sides Safety switch for automatic shutdown when door is opened TECHNICAL DATA: Dimensions and weights Iajdpfx Aaog Hzwzeden Length (product) approx. 820mm width/depth (product) approx. 730mm Height (product) approx. 1852mm Weight (net) approx. 130kg Connection suction Suction port diameter 2 x 120mm Work table(s) Working table length610mm Working table width 431mm Working table height 950mm working table inclination -10 - 45 Supply voltage 400V Mains frequency 50Hz output power 1,5kW Cutting range Cutting height max. 90°270mm Cutting width max. with stop 370mm Cutting width max. without fence 410mm Saw band Saw band speed(s) 900 / 450m/min Flywheel diameter 430mm Saw band length 3345mm Saw band guide 3-roller precision guide top and bottom SCOPE OF DELIVERY: Angle stop ±60° Laser device for cutting line marking 1 x saw band wood 3345 x 6 x 0,65 mm; 6 tooth 1 x saw blade wood 3345 x 16 x 0,5 mm; 4 tooth 1 x saw band wood 3345 x 25 x 0,5 mm; 4 tooth

Condition: used, Year of construction: 2004, functionality: fully functional, Heidelberg Dymatrix 113 CSB Pro – FULLY REFURBISHED Type of machine: Embossing and die-cutting system / automatic sheet die-cutter Machine number: 400018 Year of manufacture: 2004 Machine specifications Maximum strokes per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Maximum width: approx. 2,400 mm Maximum height: approx. 3,200 mm Maximum height with access window open: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Weight of feeder W4: approx. 3,000 kg Internal closing frame width: 820 x 1,134 mm Maximum die-cutting tool size: 816 x 1,130 mm Maximum die-cutting area: 800 x 1,120 mm with gripper margin Gripper margin adjustable from: Standard 11 – 17 mm with 13 mm wood before 1st knife Option 8 – 14 mm with 10 mm wood before 1st knife Rule height: 23.8 mm Maximum pile height (feeder, incl. pallet): 2,000 mm Maximum pile height (delivery, incl. pallet): 1,700 mm Maximum pile weight (feeder): 1,000 kg Maximum pile weight (delivery): 1,000 kg Maximum rest pile height (feeder): 450 mm Maximum rest pile weight (feeder): 450 kg Maximum auxiliary pile height (delivery): 200 mm Maximum auxiliary pile weight (delivery): 200 kg Iajdpsv T T N Hefx Aadsn Pallet sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Delivery: max. 800 x 1,200 mm (EURO pallet) Maximum pallet height: 170 mm Drive and electrical supply The machine is powered by a frequency-controlled motor via a flywheel. Between the flywheel and the machine, a pneumatic clutch with spring-loaded brake is installed, which is used to engage and disengage the machine. The motor runs continuously. The control cabinet placed at the machine contains, except for a few devices, all control components for the die-cutter and feeder. Command and indicator devices are located on the machine itself, distributed across the control panels as required. Control cabinet Equipment: Power supply, main switch, fuses, motor protection, PLC control Electrical rating: 3 phase, 400 V AC, 50 Hz, 63 A Control voltage: 24 V DC; 230 V AC; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm The machine is in excellent condition. A test run can be arranged at any time. Various accessories are included. Patent-protected chain guide rails from QTM have been retrofitted. Price: On request

Condition: good (used), functionality: fully functional, operation weight: 32,000 kg, Year of construction: 2007, operating hours: 10,000 h, Equipment: CE marking, Single-toggle jaw crusher, feed opening 1200 x 900 mm, weight 32 t, jaws in perfect condition, new movable jaw in stock and included in delivery, mechanical adjustment, clamping down to 60 mm, long jaws, new pressure plates in stock and included in delivery. One bearing needs to be replaced on the flywheel side – supply and repair handled by our workshop. Iaedpfx Aajxv Dyqedon

Condition: new, Year of construction: 2025, Band saw BS940RS3"SP V400/3/50 HP 20 CE CE VERSION Manual blade tensioning Standard equipment Self-braking motor 400 V/3/50 Reinforced twin-column base Steel blade tensioning system with guide lubrication system Front emergency stop activated via cable Rear emergency stop button Robust flywheels (1/3 crown in front) without rubber Bronze scrapers on flywheels Gravity blade lubrication system with felt pad Automatic star-delta starter Blade tension indicator Rack-and-pinion blade guide elevation with integrated blade guard Blade width: max. 90 mm Blade is not included This configuration includes: - Upper and lower blade guides with bronze side elements; - Three-phase 400V/50Hz/20HP self-braking motor; - Horizontal transport pallet FEEDER RA260 ELP (SR026) V400/3/50*CE WE VERSION Pneumatic control – Electronic variable speed drive Iedpfx Aaoxzu Nmedean

Condition: excellent (used), Year of construction: 1990, power: 5.5 kW (7.48 HP), pressing force: 40 tons Iaodpfx Aslkfzzeadsn table size: 630x380 mm stroke length: 270 mm pedal operation. flywheel diameter: 800mm

Condition: used, Year of construction: 1953, machine/vehicle number: 66/53, pressure:36 t throat:280 mm stroke:6 - 82 mm ram adjustment:51 - 13 mm no. of strokes:6-82 Hub/min table surface area:530 x 480 mm Iasdscxxwcjpfx Aadon Hole in clamping plate:Ø 140 mm clamping plate thickness:70 mm ram surface:200 x 200 mm clamping plate:530 x 450 mm dimensions of the machine ca.:1,0 x 1,65 x 1,80 m flywheel machine with DITTMER type PSK 103/B built in 1978, additional clamping plate 530 x 450 mm (thickness 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Isdpfxsq Ulh He Aadoan Upgraded Control Techniques Digital Drives Complete Line

Condition: used, Year of construction: 1971, pressure capacity max. 80 t Stroke 500 mm table surface area 960 x 810 mm Ijdjvxwzkjpfx Aadjan spindle pitch 72 daylight between the columns 950 / 540 mm passage 640 mm machine weight ab. 4500 kg dimensions of the machine ca. 2,0 x 2,0 x 3,85 m Hydraulic quick adjustment 500mm Flywheel Ø2000mm 4 prism bases for straightening waves different support frames

Condition: used, Year of construction: 2017, Used compressor SIAD VITO 1920 year 2017 Mechanical configuration and compressor structure Iaedpfew Ag U Tex Aadsn The Used compressor SIAD VITO 1920 year 2017 features a vertical reciprocating design with three compression stages. SIAD Macchine Impianti manufactured this unit in 2017 for demanding industrial applications, such as high-throughput bottling lines. The compressor uses a crankshaft made of cast iron, which rotates on spherical roller bearings. Steel connecting rods link the crankshaft to ductile iron crossheads. Moreover, a directly mounted flywheel transmits power through V-belts, while an external bearing support prevents shaft deflection caused by belt tension. In addition, the machine’s construction ensures mechanical stability even under dynamic loads. Consequently, it achieves reliable operation in continuous-duty environments. Pneumatic circuit and flow regulation The Used compressor SIAD VITO 1920 year 2017 compresses air using dry-lubricated cylinders mounted on single-chamber distance pieces. Filled PTFE seals ensure durability and chemical resistance. Furthermore, flat-disc or concentric valves regulate intake and discharge flows, and their design allows quick access for maintenance. The control logic adjusts flow automatically based on final delivery pressure. Therefore, the system supports two or three-step unloading (0–100% or 0–50–100%). When operating under partial load, pneumatically actuated unloader devices open the intake valves to reduce energy consumption. As a result, the compressor optimizes efficiency without compromising reliability. Similarly, operators benefit from adaptive control in variable process conditions. Cooling and lubrication systems The compressor cools its components using a closed-loop water-glycol system. This configuration stabilizes the thermal load during continuous operation. An electrically driven gear pump circulates the lubrication oil throughout the crankcase and the external bearing support. In fact, the lubrication system includes an in-line heat exchanger, fine filtration, and integrated pressure regulation. Technicians should fill the system with ISO VG 150 mineral oil (e.g., AGIP ACER 150) or, alternatively, a compatible synthetic such as Mobil Rarus 827. Additionally, the system incorporates temperature sensors and flow monitors that continuously verify operating conditions. Thus, any deviation from normal parameters prompts immediate intervention. Performance specifications and operating characteristics The Used compressor SIAD VITO 1920 year 2017 delivers up to 1920 m³/h of free air (FAD) at 40 bar. It draws 265 kW of shaft power at a nominal speed of 750 RPM. The unit compresses air in three stages, and each stage includes a dedicated safety valve. Operators can expect the compressor to intake air at temperatures from 0 to 40 °C and discharge it at a maximum of 45 °C. Under normal operating conditions, the unit maintains a sound pressure level of 85 ±3 dB(A), assuming a free-field environment

Condition: used, Year of construction: 1992, Used overhauled Compressor Siad Low and High-pressure System for 1850 CBM: Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022, like new and ready for delivery. Machine has 1850 m3/h of power. Complete replacement of the Baty and replacement of bands, bearings, gaskets, valves. ATLAS Copco ZR4 screw overhaul with replacement of air filter, oil filter and vapor filter, ACS Z oil, shuttle KIT, intake KIT, exhaust silencer filter, flexible coupling replacement, greasing of engine bearings and general compressor control. The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need. The machinery is guaranteed a 12-month or 2000-hour warranty on all replaced components. Only HP / LP tank and dryer need to be added. The two machines, Booster equipment and LP compressor Atlas, were purchased by the same company where they increased its compression power. Rental and short-term rental hypotheses of this Booster equipment can also be considered, with all transport and installation costs borne by the customer. The machines are now available immediately in one of our warehouses, and can be inspected, but it is not possible to start them for obvious reasons of power requirements at start-up. We have a team of technicians specialized in high and low-pressure compressors who can overhaul any unit of the major international brands such as SIAD, A&F, ATLAS COPCO, ABC and many others. Our team is at your disposal to evaluate any overhaul option of your old compressors, and in case of interest one of our employees can contact you to receive all the information necessary to make a first estimate online and possibly schedule a visit to you. It is possible, depending on our stock availability, to arrange a short-term rental during the overhaul time of your old compressor. Maintenance Performed Big end bearing half (1 bearing per connecting rod) Shoulder rings in 2/2 Half (connecting rod) Crank shaft grinding Baty Oil Filter (Succhiarola) Shirt (n 3) Piston rings + oil scraper bands (crosshead) Oil pump filter cartridges Roller bearings Full soft seal (Of phalanx and labyrinth seal) Baty hatch gasket Visual oil warning light Lantern door seals Flywheel Belts 1,2,3 phase cylinders: Piston rod (1,2,3 phase) Sealing rings and relative sealing pack plugs Piston rings + shoes (1,2,3 phase) Complete valve overhaul Head gasket (1,2,3 phase) Valve seat gaskets (1,2,3 phase) Iasdpfx Aaovgurcsdsn Various spare parts: Air filter Various O-rings Security valves Solenoid valve Various bolts

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, TECHNICAL SPECIFICATIONS: Isdpfx Aex Ura Seadean Press Model: T65 CNR4 Year of manufacture: 2002 Nominal force: 500 kN Mass: 5,000 kg Strokes per minute: 73 Maximum insertions per minute: 36 Operating air pressure min./max.: 4–5.5 BAR Braking time: 0.154 s Safety distance: 246 mm Energy: 3440 KJ Adjustable stroke min./max.: 10–120 mm Ram adjustment: 100 mm High shut height adjustment: 320 mm Maximum extraction stroke: 40 mm Worktable surface: 820x580x68 mm Ram plate dimensions: 470x340 mm Distance between table and ram: 280 mm Shank diameter: 45 mm Slide from center: 280 mm Maximum die dimensions: 470x340 mm Upper die weight: 136 kg Voltage: 400 V Hydraulic overload protection Supplied with instruction manual and CE conformity Mechanical warranty: six (6) months Electrical panel warranty: twelve (12) months NEWLY INSTALLED COMPONENTS: • Motor bearings; • Flywheel bearings; • Swivel joint bearings; • Countershaft bearings; • Clutch plates; • Clutch pins and flanges; • Clutch seals; • Hydraulic overload seal; • Hydraulic overload hose; • Equalizer cylinder seals; • Air gauges; • Front and side safety guards with safety keys; • Worktable reground on CNC machine; • Foot pedal; • Electrical panel with remote support.

Condition: new, Year of construction: 2024, functionality: fully functional, Kyori High Speed Press VX50-1500 with variable stroke adjustment Tonnage: 500 kN Drive design: flywheel with dynamic balancing Strip running direction: possible on both sides Main drive position: right Ram adjustment range: 55 mm Shut height standard: 300 mm Max. upper die weight: 300 kg Safety doors: front and back Iaedpewhk Dpsfx Aadon Work area lighting: 2 LED lights Bolster (LxW): 1500 x 600 mm Bolster thickness: 210 mm Bolster plate: T-slot pitch Bolster material: steel Press bed opening (LxW): 1200 x 160 mm Bridge in machine bed: No Ram size (LxW): 1400 x 420 mm Machining ram: 90 slot pitch Dimensions: 2311 x1835 mm Total height: 3780mm Press weight: (approx.) 14,500 kg Strip inlet height: 100 - 140 mm Strip inlet width: max. 280 mm Possible feeds: PV30-200 Cooling: water cooled, for cooling of control cabinet; AC servo main drive; as well as machine oil; connection to existing hall cooling system Press control with the following features: - 15" touch screen with stand. - User-friendly visualized menu navigation - Data import/export - Energy safe / night shutdown - Three-level energy options - User administration - Error log - High resolution coding system - Tool changeover including stored process parameters - TDC shutdown with brake angle calculation over entire speed range - Oil and air pressure display including monitoring - Integration of the press into a process chain via peripheral interfaces -Ethernet interface - USB interface - Backup function - Test stroke - Reverse run - Increased working capacity, i.e. reduction of speed to 80 strokes/min. - Quick lift including automatic approach to quick lift position and the shut height in set-up and continuous mode - Stroke change menu driven - Detection of the working stroke after stroke change with SET/ACTUAL comparison - UPS - for fail-safe operation - Absolute ram position display - Punching area protection with non-contact safety switches - Beckhoff "Twincat 3.1" control system - Beckhoff "TwinSafe" safety controller - water-cooled, for cooling the control cabinet and AC servo main drive * for stable production with fluctuating environmental influences such as heat * minimal heat dissipation inside the sound enclosure due to main drive * no suction and swirling of punching oils and particles through main drive - all electrical cables, connectors, control elements, are professionally installed - Remote support Team Viewer - Internet access through integrated Ethernet interface - Interlinked EMERGENCY STOP function - Extension of the press control for further SYS products on request - Integrated service counters for programmable maintenance intervals and maintenance instructions - 8 customer-specific error messages - 2 peripheral interfaces including power supply *Harting Interface 16A *Harting Interface 32 A - SCHUKO socket outlet 230V 10A

Condition: new, Year of construction: 2024, Kyori High Speed Press VX50-1100 with variable stroke adjustment Technical specification: tonnage: 500 KN drive: flywheel with dynamic balancer feeding direction: right to left colour: Kyori white RAL 7035 position of main drive: right ram adjustment range: 55 mm shut height max.: 290 mm max. upper die weight: 300 kg (higher upper die weight is possible with reduced performance) safety doors: front and back tool load area light: 2 LED lights Bolster area (LxW): 1100 (1140) x 600 mm Bolster design: T-slot Bolster material: steel Bolster thickness: 220 mm base plate opening (LxW): 00 x 160 mm ram area (LxW): 1100 x 420 mm ram design: T slot dimensions: 2300 x 1600 mm total height: 3750 mm weight: (approx.) 14,000 kg strip inlet height: has to be defined strip inlet width: max. 280 mm cooling system: liquid cooling system, for electrical cabinet;AC servo main drive and machine oil Press control with the following features: - 15" touch screen with stand. - User-friendly visualized menu navigation - Data import/export - Energy safe / night shutdown - Three-level energy options - User administration - Error log Ijdpfxotndfrj Aadoan - High resolution coding system - Tool changeover including stored process parameters - TDC shutdown with brake angle calculation over entire speed range - Oil and air pressure display including monitoring - Integration of the press into a process chain via peripheral interfaces -Ethernet interface - USB interface - Backup function - Test stroke - Reverse run - Increased working capacity, i.e. reduction of speed to 80 strokes/min. - Quick lift including automatic approach to quick lift position and the shut height in set-up and continuous mode - Stroke change menu driven - Detection of the working stroke after stroke change with SET/ACTUAL comparison - UPS - for fail-safe operation - Absolute ram position display - Punching area protection with non-contact safety switches - Beckhoff "Twincat 3.1" control system - Beckhoff "TwinSafe" safety controller - water-cooled, for cooling the control cabinet and AC servo main drive * for stable production with fluctuating environmental influences such as heat * minimal heat dissipation inside the sound enclosure due to main drive * no suction and swirling of punching oils and particles through main drive - all electrical cables, connectors, control elements, are professionally installed - Remote support Team Viewer - Internet access through integrated Ethernet interface - Interlinked EMERGENCY STOP function - Extension of the press control for further SYS products on request - Integrated service counters for programmable maintenance intervals and maintenance instructions - 8 customer-specific error messages - 2 peripheral interfaces including power supply *Harting Interface 16A *Harting Interface 32 A - SCHUKO socket outlet 230V 10A