Used Form-Attic for sale (4,671)

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Pedpfx Acokvmi Seropr Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1986, condition: good (used), Technical Details : Products - - Flats - 10x3 - 25x3 mm 10x4 - 25x4 mm 12x5 - 20x5 mm - Square - 6x6 - 12x12 mm - (T) Profile - 20x10x3 mm - ( L) Profile - 15x15x3 - 18x18x3 mm Raw Material wire - 8,9,10,11,12,13,14,16 mm Transformer Power - 20 Kw Ppodpfed H Ur Aex Acrjr Speed - 35m/min

Year of construction: 1996, condition: excellent (used), The line is an original American-made line for upgrading sections of rollers for drawing profiles. The American-made line has a plate and a huge number of additional rollers for pulling pipes! - Year - 1996 - Line use pulsed TIG welding for argon blowing and it can be upgraded by laser and resistance. - Electric consumers 30 kW. - Profiles - stainless steel profiles ellipse, D profiles, hexagonal, square and rectangular pipes. - In profiles of all dimensions from sheet metal width 125 mm and thickness 1 to 2.5 mm. Ppodpeh Ni Dujfx Acrer - Speed - 30-90 m/h - Cutting unit - cross section by hand or with a band saw. - Line length 12 to 15 meters.

Condition: used, Year of construction: 2017, Diesinking / EDM Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 450 mm table size X: 750 mm table size Y: 600 mm max. workpiece size X: 1040 mm max. workpiece size Y: 730 mm max. workpiece size Z: 410 mm max. electrode weight: 50 kg max. workpiece weight: 1600 kg generator: 64 Ampere cooler drop tank control Charmilles Charmilles control system High precision mold and tool machining Integrated EDM generator Ppsdpfx Asym Rr Nscrjr Dielectric system with cooling Suitable for tool and mold making

Year of construction: 1992, condition: excellent (used), Roller Rolling Machine Make Abele & Höltich type BB 20 YEAR 1992 roll diameter 180 mm 5,5,kw Pjdpfx Asg Tcn Iocrjpr 400 Volt space requirement : W.2400 mm depth 2100 mm height 1800 mm Documents available

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side 1 pce. Eccentricpress 70 kN 4 pcs. Standard slide units Ppjdpfxsyn Rg Ae Acrjr 1 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Condition: excellent (used), Year of construction: 1967, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 2 Narrow slide units 3 Standard slide units Working range: wire diameter range: 0,5 - 3,5 mm strip metal width: max. 32 mm feeding length: max. 170 mm Psdpfxel D N Hvs Acropr output: max 250/min

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm Ppjdpfx Acjr D N Eqsrer stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: used, sheet width 400 mm plate thickness 3 mm stations . System with the best coiler, straightener, eccentric press, and profile rolling machine Cutting-off system and numerous accessories Iron double coiler Type SFD 2000 Schleicher straightener Edelhoff AZR 3/100 eccentric press Press force 100 t Stroke adjustment 20-110 mm Ram adjustment 100 mm Pedpfx Ajyq Sx Eocrspr Ram strokes 105 /min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1982, sheet width 480 mm plate thickness 3 mm stations 13 weight of the machine ca. 11 t dimensions of the machine ca. 15,x2 m Number of stations 13 Ppjdsyqtx Hepfx Acrjr Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2026, warranty duration: 12 months, total height: 2,050 mm, total width: 1,350 mm, total length: 1,400 mm, overall weight: 580 kg, film width: 360 mm, product height (min.): 60 mm, product height (max.): 450 mm, product width (max.): 170 mm, product width (min.): 60 mm, filling weight (min.): 10 g, filling weight (max.): 200 g, air demand: 360 m³/h, Equipment: documentation/manual, The item is generally offered as project-based equipment or, depending on availability, as a demonstration machine. Manufacture bags in custom formats, fill them with your product, and seal them. Description - Excellent price-performance ratio - Easy to operate and clean - Low maintenance requirements - Made from rust-free stainless steel (1.4301) - Fully integrated control system within the packaging machine - Control via PLC with color touch display - Quick, tool-free format changeover - One format included - Technical documentation provided via regional partners Ppjdpfx Aceq Uld Uersr Technical Data - Intermittent heat sealing for heat-sealable films - Film thickness: 0.04mm to 0.15mm - Film width: 140-360mm - Bag size (LxW): 40-250mm x 50-170mm - Output rate: 15-40 bags/min (depending on unit) - Accuracy: ± 0.5 - 1.5g - Weighing range: 3 - 200g - Power consumption: 3.7kW / 230V / 50Hz - Air consumption: max. 360 l/min at 6 bar - Dimensions (LxWxH): 1400mm x 1320mm x 2050mm - Weight: 580kg

Condition: new, Year of construction: 2026, The item is generally offered as a project-based machine or, depending on availability, as a demonstration model. Produce pouches in the desired format, fill with product, and seal. Description - Excellent value for money - Simple operation and cleaning - Low maintenance requirements - Product-contact parts suitable for food (1.4301 stainless steel, NBR) - Control system fully integrated into the packaging machine - Operation via PLC, color touch display with intuitive user software - Fast, tool-free pouch format changeover - One flat pouch format included - Technical documentation provided by regional partners Technical Data - Intermittent heat sealing for heat-sealable films - Film thickness: 0.03 mm to 0.15 mm - Film width: 180–520 mm - Pouch size (L x W): 60–350 mm x 70–250 mm - Output: 15–40 pouches/min (depending on product) - Electrical supply: 3.2 kW / 230 V / 50 Hz - Compressed air consumption: 360 l/min at 6 bar - Dimensions (L x W x H): approx. 1700 mm x 1300 mm x 1850 mm - Weight: approx. 500 kg Options: - Additional format sets - Doypack modification Ppodpfxohtrf Es Acrer - Printer units (thermal transfer, hot stamp, inkjet) - Height adjustment, etc.

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Pedjh Uhqyopfx Acrepr Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Pedpfehrakvsx Acrepr Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Forklift forks, fork tines, forklift tines with anti-slip coating Load capacity: approx. 2.5 tons. Fork length: 1600 mm Fork width: 100 mm Tine thickness: 50 mm (40 mm metal + 10 mm rubber coating) Fork carriage height: 405 mm - Suitable for fork carriage: FEM 2 form B - Rubber coating as anti-slip coating and to protect transported goods - Tilt lever lock Own weight: 145 kg Mint condition, unused Ppjdpfohcgq Iex Acror For a 2.5 ton. Forklift truck.

Condition: like new (used), The CS-Matic 100 is offered together with the matching infeed conveyor (Audion ACC2000/4, year of manufacture 2021). The machine runs fully electric—no pneumatics, no compressed air required—making it exceptionally quiet in operation. Packaging capacity: up to 4,200 packs per hour (depending on product size, package configuration, and film type) Conveyor speed: 10 – 30 m/min Maximum package height: 200 mm Maximum package width: 400 mm Maximum package weight: 30 kg Sealing length: 500 mm Maximum film size: 600 mm (center-folded – ø 350 mm) Compatible films: Polyolefin (up to 30µ), Polyethylene (from 15 to 80µ with optional PE sealing bar) Machine dimensions (L x W x H): 2,170 x 1,875 x 1,665 mm Machine weight: 715 kg - Automatic centering seal adjustment - Automatic control of sealing bar height - User-friendly LCD control panel, 7" color touchscreen - Storage and retrieval of process statistics (counters, package length measurements, real-time output, machine performance, irregular pack detection) - Electronically adjustable conveyor speed - Single pack/multi-pack mode - Continuous, fully electric 4.0 packer with 2 belts - Cross sealing bar with PTFE-coated sealing blade, controlled via inverter and encoder - Faulty package detection - Inverter and encoder controlled This system allows all operations to be managed simply and precisely. - Power and control section Podpfxoyrm D Ej Acrspr - Electronically controlled conveyor speed - Reduced power consumption

Year of construction: 2019, condition: like new (used), Marchenisi Group Box Forming Machine Model FRB500 Ppjdpfxeybtnvo Acrsr Year 2019 Automated box forming machine. Form cartons with a Nordson hot melt glue pump. - fill cartons with sealed strips (robot) - indexing - insert booklet - seal lid with hot melt glue - index to serialised printing - carton discharge

Condition: ready for operation (used), Year of construction: 1973, pressure 180/360 t Ppedpfx Aoyxy Huecrjr

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Worktable 5000 x 1500 mm (left table 3000x1500, right 2000x1500) Z-axis travel: 1000 mm Ppodpfx Aeytyfrjcrer 2 electrospindles of 12kW each (up to 24,000 rpm) each with a 6-position tool changer 16-position disc tool magazine Numerical control: OSAI S510 Software: ALPHACAM Portable control console Work surface consists of 2 tables Electrical cabinet with air conditioning Set of suction channels and chip collection trays

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, GF AgieCharmilles FORM 2000 HP Psdpeyniyusfx Acrjpr Year of manufacture: 2012 C-frame design, fixed table with lowering tank Travel (X/Y/Z): 400 x 300 x 350 mm Table to quill distance: 170-520 mm Max. workpiece size (L x W x H): 820 x 580 x 250 mm Max. workpiece weight: 800 kg Integrated C-axis for rotation, indexing, and EDM (U=0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) ISPG generator with 60 Amps Best attainable surface finish: Ra 0.10 µm AGIEVISION 5 control interface 15” LCD color screen, mouse or touchscreen, lift keyboard, and manual control unit Including EROWA ERC 80 robot - Electrode changer - Pallet changer Net weight of the machine: 3,830 kg Machine dimensions: 1,410 x 2,460 x 2,660 mm Upon order confirmation, the machine will be cleaned, serviced, and tested by us. Optional: - Commissioning and training - Transportation and installation - Cooling unit - Dielectric fluid

Condition: ready for operation (used), 🔧 Key Specifications Forming Area: 620 × 620 mm (24.5 × 24.5″) Sheet Size: 660 × 660 mm (26 × 26″) Maximum Draw Depth: 250 mm (9.8″) Maximum Material Thickness: 10 mm (0.4″) Heating Zones: 12 (6 top + 6 bottom), independently controllable Heater Type: Ceramic (standard) or optional quartz Vacuum Pump: 16 m³/h dry rotary vane Pjdpfx Aewnxxbscrjpr Power Consumption: 12.0 kW Air Requirements: 87 PSI / 6 bar Machine Dimensions (W × H × D): 1732 × 1500 × 2225 mm Weight: 300 kg

Condition: excellent (used), OPEM Arabella Vacuum Coffee Packaging Line – 250 g – with Gas Flushing & Valve System – Year 2005 Manufacturer: OPEM Model: Arabella Year of manufacture: 2005 Condition: Very good, fully functional Location: Germany Pjdpfsynn A Isx Acrspr Availability: Immediately available Machine Description For sale is a complete vacuum coffee packaging line for 250 g bags (ground or whole beans). The system is equipped with: • Vacuum brick packaging system • Inert gas flushing (nitrogen flushing) • Integrated aroma valve system (degassing valve) • Including dosing system • Packaging from roll stock • Compact monoblock design • Industrial-grade, "Made in Italy" This machine is ideal for freshly roasted coffee and guarantees optimal aroma preservation and extended shelf life through the combination of vacuum, inert gas flushing, and valve. Technical Data • Pack size: 250 g • Packaging type: Vacuum brick pack and soft-gas-pack bags • Output: approx. 20–30 bags/minute (depending on product) • Gas system: Nitrogen flushing • Valve system: Integrated • Dosing system: Included • Packaging from roll stock • Year: 2005 Scope of Delivery • OPEM Arabella main machine • Dosing system • Gas flushing unit • Valve application system • Control cabinet / electrics Spare parts available

Condition: ready for operation (used), functionality: fully functional, For sale is a Rovema form-fill-seal machine for packaging coffee in weight ranges from 500 g to 1,000 g. The machine is fully operational and features an integrated aroma valve system for coffee pouches with freshness valve. Technical specifications: • Suitable for 500–1,000 g of coffee • Integrated valve system • Robust, durable construction • Ideal for ground coffee or whole beans Pjdoynntmopfx Acrspr • Comprehensive spare parts package included This machine is manufactured to high German quality standards – solid, reliable engineering (good traditional workmanship). Inspection or demonstration available by appointment.

Year of construction: 2014, condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 600 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 500 mm Podpfsyy Th Iox Acrjpr MAX ELECTRODE WEIGHT: 50 Kg MAX  PIECE WEIGHT: 2000 Kg MAX PIECE SIZE: 1200 x 800 x 350 mm TANK SIZE: 1280 x 850 x 390 mm CONTROL UNIT: VISION 5 WEIGHT: 5500 Kg OVERALL DIMENSIONS: 1800 x 2900 x 3200 mm ACCESSORIES: C-AXIS NOTE: POSSIBILITA' DI AGGIUNTA MAGAZZINO CAMBIO ELETTRODI.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 45802, Handtmann RF 440 round former with vacuum filler for the automatic production of dumplings and balls with homemade quality. Year of construction 2021 very little used condition like new! Psdpfx Ajyk U Ezjcrepr