Used Form-Attic for sale (37,171)

Condition: used, Year of construction: 2015, thread dia. 20 - 80 mm grinding length 3500 mm thread pitch . mm threading lenght min./max. 50/3500 mm centre height 400 mm workpiece length - max. 4000 mm control Siemens 840-Dsl feed speed u-axis 0 - 2500 mm/min feed speed w-axis 0 - 2500 mm/min feed speed b-axis 100 1/min total power requirement 45 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,7 x 4,6 x 2,9 m Thread Grinding Machine / Profile Grinding Machine, suitable for: - the thread grinding of single and multi-start ball screws with gothic profiles and special profiles - Ø 20 to 80 mm with a grinding wheel Ø of 350 to 500 mm - length between the centers up to max. 4000 mm Equipment / Accessories: - grinding spindle: - capacity 14 kW - with a grinding wheel diameter range of 350-500 mm, cutting speeds between 20 and 75 m/s can be set. - grinding wheels: - diameter new 500 mm - diameter worn 350 mm - bore diameter 203.2 mm - shaped diamond roll: - diameter 121.3 mm Iajdpfew Ed S Usx Addel - radius 0.5 mm - driver flange for workpiece diameter 15-70 mm - driver: - for 10-32 mm drive diameter on the workpiece - for 31-60 mm drive diameter on the workpiece - for 60-105 mm drive diameter on the workpiece

Condition: excellent (used), CATALOG NUMBER 7479 Technical data: - shaft width: 410 mm - 4-knife shaft (TERSA) - noise reduction comb - shaft guard - table length: 2610 mm - longer infeed table: 1435 mm Isdpsx Tgwcsfx Addjal - cast iron tables - both tables adjustable - original cast iron tiltable fence - brake - extraction port diameter: 115 mm - motor: 4 kW - dimensions (LxWxH): 2610x960x1110 mm - weight: 578 kg ADVANTAGES – Made in Italy – 4-knife shaft – brake – noise reduction comb – longer infeed table – unpainted – used surface planer, in very good condition, original DTR documentation Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may change depending on significant exchange rate fluctuations)

Condition: excellent (used), Wide Belt Sander FORMAT 4 Finish 1302 -used- Constant working height due to upper part adjustment, Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 units Sanding belt dimensions: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Extraction port Ø: 2x200 mm Motor power: 18.5 kW Iasdpfxexnm Rcs Addsl Second motor power: 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Quality Information: - Belt tracking / balance checked - Sanding pad checked / refurbished - Height adjustment checked - Thorough basic cleaning - Electrical system checked - Immediately ready for use

Condition: good (used), workbench, work table, assembly bench -Width: 1250 mm -Depth: 700 mm -Height: 860 mm Iaodeb A Izuspfx Addel -Drawer: 1 -Weight: 75 kg

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left machine stand - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining zones for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor Ijdpfx Aex Hllxjddsal - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with handheld control device - Included: 12 frame clamps, 8 large and 4 medium-sized suction cups Availability: approx. end of January 2026 Location: North Rhine-Westphalia

Condition: new, Year of construction: 2025, FORMA Z folding machine is the most flexible and diverse sheet metal folding machine in our portfolio. Folding both up and down, FORMA Z folding machine eliminates the need to flip material, providing time-efficient folding of complex parts using one operator. The Combi beam rotation between two tooling set ups and the unique geometry gives you unrivalled working space. The automatic tool locking is fast and has features making tool changing very ergonomical. The folding beam has automatic crowning, automatic folding center adjustment and automatic sheet thickness adjustment, which provides superior folding quality in all thicknesses and across the folding length. The large number of vacuum grippers holds the part steadily, anywhere on the back gauge. Large blanks as well as small, one as well as several. The back gauge comes in many designs, which gives you great freedom of choice in how you would like to operate the machine and manage the flow of blanks and parts to/from the machine. Last, but not least – FORMA Z is fast: more production in less time for you! Isdjmhhn Espfx Addoal - CNC controlled crowning of folding beam - CNC folder that folds upward and downward, no need to flip the material. - 150 mm movement of folding beam, to move outside of material on folding side. - The Combi beam comes equipped with 203 mm (8”) High Divided Tools and straight rail. - Comes as standard with multifold tooling, CNC controlled sheet thickness and folding center adjustment. - The folding beam can be used as front gauge up to 150 mm. - Add vacuum grippers to make work lighter, more precise, and automated!

Condition: used, Year of construction: 1988, functionality: fully functional, • Machine type: Tire building machine • Configuration: Tire building machine with (3) hot knives • Model designation: BRC III R1 E84 Manufacturer • Manufacturer: The Goodyear Tire & Rubber Co. • Production site: Goodyear S.A. – Mold Plant • Country of manufacture: Luxembourg (as stated on the nameplates) Iedpex I Ea Sefx Addoal Identification (visible) • Model: BRC III R1 E84 • Serial number: 21553 • Date of manufacture: June 1988 Included units • Number of hot knife cutting machines: 3 • Type: Hot knife cutting machine • Manufacturer (cutting machines): The Goodyear Tire & Rubber Co. • Production plant: Goodyear S.A. – Mold Plant Mechanical configuration (visible only) • Inline tire building machine • Multiple roller conveyor sections • Tire building drum station with circular frame • Hydraulic unit with pumps, valves, and pressure gauges • Floor-mounted steel machine base • Fixed yellow safety guard and wire mesh fencing

Condition: excellent (used), CATALOG NUMBER 7394 TECHNICAL DATA - max main blade diameter: 380mm - max cutting height: 110mm - main blade height adjustable up/down - spindle diameter: 30mm - spindle lock Iodpfx Adox S I Rhodjal - with sliding table - cutting length on sliding table: 2560mm - cutting width at rip fence: 810mm - with side table - main motor: 5.5kW - table dimensions: 1250x730mm - blade guard included - overall dimensions (L/W/H): 2580x2570x1050mm - weight: 780kg ADVANTAGES – German-made – Used saw, very good condition Net price: 7900 PLN Net price: 1880 EUR (based on 4.2 EUR rate) (Prices may change with significant currency fluctuations)

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Iasdpfx Asu R S Nweddol Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: like new (used), Year of construction: 2020, operating hours: 100 h, functionality: fully functional, For Sale; 2 Martini Quad Seal Bag Formers, little used, as new. Isdpjxzdhxofx Addeal Smaller; makes bag 60mmx45mm Larger; makes bag 90mmx60mm Sale Price is less than 50% of actual cost

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Pass-through height. Operator terminal: 24" LED color display. Handheld terminal for controlling axis speeds. Software: "Woodflash". Vacuum pump 90 m³/h, 50 Hz or 108 m³/h, 60 Hz. Milling spindle 12 kW HSK F63 (12,000 rpm). 12-position linear tool changer on the left side of the machine frame + pickup position. Drilling head DH 16 4H 2S: Vertically 12 spindles, horizontally 4 spindles, 2 grooving saws. Storage location: Supplier. Iedpfx Adjxy Tlwedjal

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 900 h, load capacity: 500 kg, empty load weight: 21,500 kg, fuel type: diesel, drive type: Diesel, arm reach: 12,600 mm, working height: 18,700 mm, Road-rail aerial work platform Iajdpfjtv Sx Aox Addol Technical condition: good Description: Standard track width: 1435 mm, hydrostatic rail drive and braking system, multiple drive modes: 4WD/2WD/crab steering, all-wheel steering for improved tracking, automatic leveling to compensate for overhangs of up to 200 mm, optional pantograph for contact wire measurements, lift and slew limiters (mechanical and electronic), EU Stage V diesel Hatz 4H50 engine, 2 diagnostic displays

Condition: used, Year of construction: 2008, functionality: fully functional, • Device type: Oil-cooled transformer • Installation type: Stationary, floor-mounted • Application context (visual): Industrial power supply for production machinery Manufacturer • Manufacturer (nameplate): MGM Transformer Company • Manufacturer location (nameplate): City of Commerce, CA 90040, USA • Country of manufacture: United States (explicitly stated: "Made in USA") Identification • Manufacturer serial number (SN): 08-09-08-50232A • Additional identification mark: 7008608D0002 • Catalog number (CAT NO): M2885A2625U0333 • P/L No.: P2885TU-0333 Electrical Specifications (nameplate) • Rated power: 2885 kVA • Phase: 3 PH • Frequency: 50 Hz • High voltage (HV): 20,000 V • Low voltage (LV): 2300 / 2300 / 2300 V • Impedance: 6.36% at 2885 kVA • Insulation class: OA • Temperature rise: 65 °C Insulation / Dielectric Data • HV BIL: 125 kV • LV BIL: 60 kV • Cooling medium: Oil • Fluid level reference: – 14 in below handhole at 25 °C – Fluid level change: 0.64 in per 10 °C Mechanical Data / Tank Data • Suitable for tank vacuum: –10 PSI (vacuum filling) • Maximum operating pressure: +7 PSI • Altitude rating: Up to 3,300 ft above sea level Weight Information (nameplate, approx.) • Core and coil weight: 11,820 lb • Tank and fittings: 8,320 lb • Oil volume: 1,235 gal • Total weight: 27,500 lb • Weight without tank: 11,820 lb Isdpfxex It Sce Addoal Tap Changer Information (nameplate) • Tap positions: 1 (A) to 5 (E) • HV Tap Voltages: – 21,000 V – 20,500 V – 20,000 V – 19,500 V – 19,000 V

Condition: excellent (used), The Formid Limited is a roll forming line with an electrically extendable support system for forming sets up to 800 mm. The drive is manual via a bevel gearbox. It can be combined into a single electric system and measures the width of the spacing. Mounted on 45 mm shafts, 12 keyways, shaft distance 145 mm. Axle spacing 250 mm. Shaft spacing minimum 200 mm from each other and 800 mm apart. Powered by a 380-volt electric motor with 15 kW. The system is suitable for profiles with frequently varying center widths. It features center roller supports to maintain the lower layer of the steel strip, which in turn supports the base strip substrate in a defined profile. The system also includes 16 stations. Iasdpfx Adowxv Izjdsl

Condition: excellent (used), Year of construction: 2016, Format 4 Kappa 550 Positioning control e-motion – TFT screen Year of manufacture: 2016 320 cm sliding table 5.5 kW motor with brake Scoring unit control Max cutting height: 200 mm Saw blade: 250 - 550 mm Speeds: 3000 / 4000 / 5000 rpm Scoring blade rotation speed: 9000 rpm Motorized rip fence Saw blade tilting up to 45 degrees, single-sided Electric height adjustment Operator panel at eye level Iaedpfxex Rugte Addel Crosscut fence with digital display Movable support rail with digital angle display Crosscut fence with length compensation Extraction connection: 120 mm and 100 mm Extension arm with swing-away function Cutting width: 1348 mm Crosscut fence up to 3200 mm Control station on sliding table Dimensions (without extension arm): 3400 x 2200 mm Weight: 1300 kg

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 118394, type of input current: AC, overall weight: 2,540 kg, input voltage: 21,500 V, input frequency: 50 Hz, nominal power (apparent): 800 kVA, secondary voltage: 420 V, protection type (IP code): IP00, temperature: 100 °C, type of output current: AC, output voltage: 420 V, Equipment: type plate available, Transformer that has been used on short occasions for backup operation, especially the last two years, is in a heated container. Can be sold with or without container, can also be rented for short periods, We have our own crane truck if express delivery is needed. The container can also be supplemented with low-voltage switchgear made by ABB Kabeldon attached to the outside of the container. Ijdpfex Run Dsx Addeal

Year of construction: 2021, condition: ready for operation (used), Main Drive Spindle speed range 24000 rpm Spindle motor power 12 KW Tool taper HSK F63 Number of axis 3 Movement X-Axis Movement 3500 mm Y-Axis Movement 950 mm Z-Axis Movement 80 mm Table Table load 130 kg Tools Max weight 7.5 kg Additional Equipment Iajdpfx Aex D H Srjddel Teleservice package via Internet Automatic central lubrication 4-fold linear changer for use with power packs This 3-axis FORMAT4 Creator 950 CNC Wood Machining Centre was manufactured in 2021. Ideal for precision woodworking, it offers robust construction and advanced control features. Consider the opportunity to buy this FORMAT4 Creator 950 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 32 h, load capacity: 200 kg, empty load weight: 2,350 kg, fuel type: hybrid, drive type: Hybrid, arm reach: 9,200 mm, working height: 17,600 mm, Tracked work platform Ijdpfx Adjx Effmjdsal Technical condition: very good Kubota diesel engine Double speed Hydraulic basket rotation Set of outrigger pads Radio remote control for driving and stabilizing Straight adapter SCHUKO to CEE with 1.5 m cable

Condition: used, Year of construction: 2019, functionality: fully functional, Rated voltage: 220/380 V; Current: 30 A. The vacuum forming machine comes with its own wood cutter/former (see pictures). Iaedexzpw Eopfx Addel

Condition: good (used), Nice Formax F19 former with touchscreen controls. Well maintained machine direct from European burger factory. With Tenderform Iodpfx Adjqaz R Usdjal

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 206 h, load capacity: 230 kg, empty load weight: 5,000 kg, fuel type: hybrid, drive type: Hybrid, arm reach: 15,110 mm, working height: 27,010 mm, Crawler Work Platform Iaedpfx Adjv Ut Ekedjl Technical Condition: Very Good Description: Standard Equipment: 230Vac/3Hp electric motor & Kubota diesel engine (water-cooled) Multifunctional & electro-hydraulic proportional control Radio remote control for driving + automatic stabilization + emergency control Telescopic functions Lightweight, removable work platform 1 x high-pressure line for air/water connection & 1 x power connection (230Vac) in the work platform Tilt sensor (max. 1.0°) Diagnostic display for easy maintenance Hydraulically adjustable crawler chassis Black tracks Variable stabilization (narrow/wide) 90+90° basket rotation Versatile applications thanks to extensive options Non-marking tracks as a replacement for the standard tracks Pre-installed for a winch - 250 kg capacity

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 51 h, load capacity: 250 kg, empty load weight: 2,700 kg, arm reach: 9,500 mm, working height: 19,400 mm, Crawler Work Platform Technical Condition: New Iedpfsx Effgsx Addoal Description: Standard equipment: BI drive with Honda iGX390 gasoline engine or optional Kubota Z482 diesel engine (water-cooled) & 230Vac electric motor. Multifunctional & electrohydraulic proportional control. Radio remote control for driving + automatic outrigger leveling + boom telescope. Spare battery for radio remote control with integrated charger. Lightweight, removable work basket. Air, water, and power connection (230Vac) in the work basket. Tilt sensor. Diagnostic display for easy troubleshooting/maintenance. Mechanically adjustable crawler chassis. Black tracks. Hydraulic basket rotation. Double speed. Can be transported on a trailer (3.5t) with driving license class BE. 70+70° basket rotation. Versatile application options thanks to extensive features. Kubota diesel engine, white tracks, winch pre-installation, SCHUKO to CEE adapter (straight), 1.5 m cable.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 4 h, load capacity: 230 kg, empty load weight: 2,980 kg, fuel type: hybrid, drive type: Hybrid, arm reach: 10,300 mm, working height: 21,700 mm, Crawler Work Platform Technical Condition: New Description: Standard equipment: BI drive with Kubota diesel engine (water-cooled) & 230Vac electric motor. Multifunctional & electrohydraulic proportional controls. Radio remote control for driving + automatic stabilisation. Lightweight, detachable work basket. Air, water & power supply (230Vac) in the work basket. Electronic tilt sensor. Diagnostic display for easy maintenance. Hydraulically adjustable crawler chassis (width and height). Black tracks. Variable stabilisation (narrow/broad – can also be used one-sided). Spare battery. Remote control with integrated battery charger. Standard color: chassis and supports black, superstructure red (RAL3020). Can be transported on a trailer (3.5t) with class BE driving license. 90+90° basket rotation. Versatile applications also thanks to a wide range of optional equipment. Double-speed white tracks. Winch preinstallation. Adapter: straight SCHUKO to CEE with 1.5 m cable. Iedpfxew R Hm Ro Addoal

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 2 h, load capacity: 200 kg, empty load weight: 1,750 kg, fuel type: hybrid, drive type: Hybrid, arm reach: 7,800 mm, working height: 13,400 mm, Tracked Aerial Work Platform Technical Condition: New Description: Standard equipment includes bi-power drive with Honda GX270 (air-cooled, single cylinder, 4-stroke petrol engine) & 230 V / 110 V AC electric motor. Optional: battery (E) / battery-petrol (ED) version. Smooth and multifunctional control. Lightweight, detachable work basket. 230 V AC socket in work basket. Air and water connections in the work basket. Electronic tilt sensor (max. 1.5°) and analogue spirit level. Two speeds for travel functions. Radio remote control for drive, stabilisation and basket movements. Diagnostic display for easy maintenance and troubleshooting. Ramp assistance for loading. Full ground control via hydraulic valves. Black tracks. Rigid track chassis, 780 mm width. Reference standard DIN EN 280 and CE certified. Transportable on a trailer with class BE driving licence. Narrow support widths. Electric motor operation possible from a standard household socket. Versatile applications due to a wide range of options. Pure telescopic boom for increased stability and additional jib with low dead weight. Outriggers for greater ground clearance. SCANRECO radio remote control for driving and stabilising (incl. automatic stabilisation) and platform operation. Hydraulic basket rotation, Honda iGX390 engine, white tracks, adjustable chassis, straight adapter SCHUKO to CEE with 1.5 m cable. Iaodpex Effaofx Addol

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 616 h, load capacity: 200 kg, fuel type: diesel, empty load weight: 2,900 kg, drive type: Diesel, arm reach: 4,700 mm, working height: 9,500 mm, Rail-road aerial work platform Technical condition: good Iodpfev Ut Hbex Addjal Description: Hydrostatic drive for modern on-track operation and a 200 kg basket load for sufficient working capacity. Automatic leveling of the upper carriage. Full working pattern up to 200 mm cant. Also offers a dynamic working pattern (allowing the machine to move in these positions). Conforms to Machinery Directive 2006/42/CE, EN 280-2015. Emergency electric pump. Easy transport via 3.5 t trailer. Can be quickly rerailed and derailed. Ready for quick-change axle system. On-board diagnostic display. Scanreco radio remote control. Oscillating axle. Speed indicator.