Used Form-Attic for sale (4,587)

Condition: ready for operation (used), Year of construction: 2005, Two Beck MPX 240T are available, control panel: Siemens SIMATIC OP7, with documentation, on machine 1 the Teflon coating of the welding knife is partially damaged and must be replaced, on machine 2 the welding knife may have to be replaced, as well as the cover of the fan of the control cabinet. An on-site inspection is possible. Fsdpfx Ajwal Igoa Eopd

Year of construction: 2016, condition: ready for operation (used), Various machines for processing, walking, steaming, and preforming uppers and lasts for the shoe manufacturing industry are available. 1) Moccasin upper steamer Elettrotecnica 232/S, year of manufacture: 2008, tank capacity: approx. 15l, heating time: approx. 8min, power consumption: 6kW, machine dimensions X/Y/Z: approx. 600mm/450mm/950mm, weight: approx. 70kg. 2) 2x aluminum last preforming machines Nova M-BO, year of manufacture: 2002, max. temperature: 200°C, machine dimensions X/Y/Z: approx. 950mm/700mm/1350mm, weight: approx. 250kg. 3) Upper walking machine Ring-Leibrock Wasch 3-2K, year of manufacture: 2016, stations: 2, max. temperature: 120°C, stroke rate: 25/min, machine dimensions X/Y/Z: approx. 1300mm/950mm/1700mm, weight: approx. 420kg. 4) Upper preforming machine Irleh IR-13/P, year of manufacture: 2005, max. temperature: 160°C, machine dimensions X/Y/Z: approx. 1400mm/900mm/1600mm, weight: approx. 400kg. 5) 2x upper preforming machines RKK Kölsch H-BÜ, year of manufacture: 2007, max. temperature: 180°C, machine dimensions X/Y/Z: approx. 900mm/700mm/1300mm, weight: approx. 210kg. An on-site inspection is possible. Fpjdpfx Aexnp Rrsa Ejd

Year of construction: 2016, condition: ready for operation (used), A Wiese pendulum bucket elevator in Z-shape for gentle vertical and horizontal conveying of sensitive, light bulk materials (potato chips) is available. Particle size range: 50mm-60mm, max. conveying material temperature: 30°C, moisture: dry, bulk density: 0.07t/m³, conveying capacity: approx. 14.3m³/h, belt speed: 0.22m/s, max. bucket filling: 60%, belt material: EPDM, bucket width: 476mm, support roller diameter: 95mm. Lower edge discharge: 4960mm, feed vertical shaft center: 3490mm, vertical shaft center last discharge: 1675mm. Documentation available. An on-site inspection is possible. Fpsdpfxjx H S N De Aa Ejd

Condition: ready for operation (used), Year of construction: 2012, Two identical vertical flow-wrapping machines from PFM are available. 1) PFM Zenith, year of manufacture: 2012, weight: approx. 870kg, connected load: 5kW, packaging output: approx. 60/min. 2) PFM Zenith, year of manufacture: 2009, weight: approx. 980kg, connected load: 6kW, packaging capacity: approx. 60/min. Both machines were used in the food industry for packaging individual bags in a large outer bag. Documentation available. On-site inspection is possible. Fedoubbzuopfx Aa Eepd

Condition: ready for operation (used), Year of construction: 1990, An Enflex automatic packaging machine for powdery and granular products for the production of pouches from heat-sealable wrapping materials with three or four-sided sealing is available. Dosing capacity min./max.: 5cm³/50cm³, min. bag width: 50mm, min. bag height: 50mm, max. bag width (single bag): 65mm+65mm, max. bag width (with perforation): 70+mm, max. bag height: 150mm, packaging capacity range: 150-18000 bags/h. Wrapping material (all heat-sealable wrapping materials): Polyethylene opaline, cellophane, polyester, organic polypropylene, etc. Machine dimensions X/Y/Z: approx. 5000mm/1100mm/2100mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible. Fpedpfx Aajwa A Tts Esd

Condition: ready for operation (used), Year of construction: 2008, A Fuji flowpack horizontal tubular bag machine is available. Packaging capacity: 140 packages/min, max. film width: 600mm, cut length range: 130mm-430mm, max. product width: 200mm, max. product height: 90mm, machine dimensions X/Y/Z: approx. 4800mm/1300mm/1500mm, weight: approx. 2300kg. On-site inspection is possible. Fjdpswnr H Sjfx Aa Espd

Condition: ready for operation (used), Year of construction: 2006, A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible. Fsdexa Elcepfx Aa Eopd

Condition: ready for operation (used), Year of construction: 1997, A vertical form fill and seal packaging machine Goglio for bulk materials including a vibrating chute scale with two chutes is available. Weighing range min./max.: 300g/3000g, accuracy: +/-0.3%, load cell type: HBM PW2 C3/18, max. load: 18kg, scale type: GL 111, packaging dimensions for 1000g: 130mm/80mm/400mm. Machine dimensions X/Y/Z: approx. 2300mm/3000mm/3500mm, weight: approx. 2800kg, control: IBM 7542 industrial computer. The machine is defective. Documentation available. An on-site inspection is possible. Fsdpfxjxpw T Dj Aa Ejpd

Condition: ready for operation (used), Year of construction: 1987, A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Bag dimensions X/Y: 220mm/340mm, packaging capacity: 55 bags/min, operating hours: 35554h. Documentation available. An on-site inspection is possible. Fjdow H At Tjpfx Aa Ejpd

Condition: ready for operation (used), Year of construction: 1991, A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Packaging capacity: 80 bags/min, bag dimensions X/Y: 250mm/350mm, max. film roll width: 530mm, machine dimensions X/Y/Z: approx. 2000mm/1450mm/1850mm, weight: approx. 1200kg, operating hours: 14607h. Documentation available. An on-site inspection is possible. Fpodpfx Asw H Audea Ejd

Condition: ready for operation (used), Year of construction: 2002, There are zwei identical vertical bag filling machines available, weight: 1.1t. Fjdpfx Asnfvxzja Eopd

Condition: ready for operation (used), Year of construction: 2014, A continuous Schur flow pack machine is available. Output rate: 30m/min, max. packaging capacity: 80bags/min, min. bag dimensions X/Y: 100mm/100mm, max. bag dimensions X/Y: 450mm/500mm, bag material: PE/CPP/films/laminates, material thickness range: 0.04mm-0.14mm. Weight: approx. 650kg, control system: Siemens Simatic PLC S7-300, operating hours: 256h. Documentation available. An on-site inspection is possible. Fjdexuiuqjpfx Aa Ejpd

Condition: new, Fully automated machines for the trapezoid roll forming, in various sizes. Please, contact us in order to receive further information as well as the technical documentation. Fedpfx Aoyr Nkboa Eopd

Condition: like new (used), Year of construction: 2022, operating hours: 170 h, functionality: fully functional, machine/vehicle number: 156-600, total height: 2,920 mm, total width: 1,480 mm, total length: 2,600 mm, type of input current: AC, overall weight: 2,500 kg, film width: 100 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (min.): 50 mm, product height (max.): 110 mm, product width (max.): 50 mm, product length (min.): 50 mm, product width (min.): 50 mm, product length (max.): 110 mm, nominal power (apparent): 8 kVA, filling weight (min.): 5 g, filling weight (max.): 20 g, air demand: 0.4 m³/h, input current: 12 A, roll diameter: 76 mm, Equipment: documentation/manual, safety light barrier, The FlexiBag Bi 260 was acquired as a test machine for processing polymer-bound phase change granules. All specifications regarding packaging width, package weights, and output rates refer to polymer granules with a bulk density of 550 kg/m³ and a density of 860 kg/m³. In principle, the machine can be used for all types of granulates, powders, etc. For dosing, a BW211 Micro belt weigher from DOWATEC is installed. This enables very precise dosing. Thanks to two dosing belts, a high productivity of 30 cycles per minute can be achieved by the packaging machine. Fpsdpfx Aoyi Eqxoa Ejd The FlexiBag Bi 260 is suitable for impulse and heat-sealable films as well as nonwovens. The packaging machine has only been used as a test machine and has a low total operating time of 170 hours.

Condition: used, This listing is for a Quickpouch Automated Form-Fill Seal Packaging Machine with Videojet Dataflex Printer for Quickpouch Auto loader. Fsdpexzg Hqofx Aa Eopd Manuals are available on request.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, ram adjustment: 150 mm, table length: 2,000 mm, table width: 1,200 mm, pressing force: 250 t, stroke adjustment: 40,200 mm, overall weight: 55,000 kg, DGUV certified until: 09/2026, Raster punching and forming line RSU 2500 - 2000 P Desch compact drive unit Electronic press force measuring system Fjdpfsxcbbrjx Aa Ejpd Hydraulic overload protection system 3-piece tie rod cast construction Tool holder Table and slide clamping devices Raster VWA hydraulic roll feed, band width 500 mm, with Topochrom roll coating Slide area 1000 x 2000 mm Stroke rate: 20 - 150 spm Stroke adjustment: 40 - 200 mm Optionally with Kohler coil line 20030.400/9-2000 .2H

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Fodpfxotp H Ero Aa Ejpd Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: used, Year of construction: 2007, functionality: limited functionality, machine/vehicle number: FLEXIBAG FB BC 400, Equipment: documentation/manual, For sale: HASSIA REDATRON packaging machine Machine type: FLEXIBAG FB BC 400; Machine number: 152970 Year of manufacture: 2007; 3x400/230N-PE; 50Hz; 26kVA; 3x50A Net price: 18,000 EUR Fedpfx Asytr Uxea Ejpd This is an industrial vertical packaging machine designed for forming, filling, and sealing bags. We encourage you to contact us.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 4 Standard slide units 1 Narrow slide units 1 control shaft Fpedpfxjx Tuzcj Aa Eod Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: like new (used), Year of construction: 2017, operating hours: 9,830 h, The machine has not been used for several years so we want to sell it. Fpodpfjwimu Hjx Aa Eod It is in very good condition.

Condition: ready for operation (used), Including Ascending Conveyor SBM 45 and Counting Machine ZMR 3/ 3-130. Fpjdpfxohncwij Aa Eod

Year of construction: 1991, condition: ready for operation (used), Filling format: 70-150g, forming shoulder format: 120/ 140mm, with three forming sets and multi head scale. Fpsdpfxshtvmae Aa Esd

Year of construction: 1990, condition: ready for operation (used), Was used for filling 10l milk bags, there is a second machine as a source for spare parts available. Fsdpjir U S Rjfx Aa Espd

Condition: new, Year of construction: 2025, Automatic roofing sheet forming machine for aluminum or galvanized steel sheet with a sheet width of 1000mm. Includes automatic sheet decoiler, Siemens control system, and technical documentation. Fpodew A Rt Hjpfx Aa Eed

Condition: excellent (used), Year of construction: 1984, Equipped with: 1 Grip feeding system right hand side 3 Press units á 180 kN = Total 540 kN 4 Standrad slide units Fsdpfoma S Nrsx Aa Ejpd 1 Narrow slide unit working range: wire diameter range: up to 10,0 mm strip metal width: up to 100 mm feeding length: up to 250 mm output: up 135/min.