Used Front Lathe for sale (23,142)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Technical details swing over bed 730 mm centre distance 3000 mm control Heidenhain MANUALplus4110 weight of the machine ca. 6,5 t dimensions of the machine ca. 7400 x 2100 mm Additional information Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: Nwjdpfx Ajymliiobdjc AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Coolant system Work area enclosure with two sliding doors. Machine length 5700 mm, with swarf converyor 7400 mm Machine width 2100 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm Nsdpfx Ajymlf Dsbdewc swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: ready for operation (used), turning diameter over bed 220 mm turning diameter over slide rest 120 mm turning length 450 mm speeds infinitely variable 315-2000 U/min. spindle bore 23 mm tailstock quill taper MT 2 total power requirement 0,37 kW Nwedpfxeym D A Us Abdoc weight of the machine ca. 210 kg dimensions of the machine ca. 1,08 x 0,45 x 1,18 m

Condition: used, Year of construction: 1995, turning diameter 560 mm turning length 1250 mm control Sinumerik 805 Nwsdpfxeymp Sue Abdsc turning dia. over face-slide 340 mm spindle bore 63 mm spindle turning speed range 3 - 2500 U/min feeds - longitudinal 0,001 - 3 mm/U feeds - cross 0,001 - 3 mm/U rapid traverse longitudinal 7 m/min rapid traverse cross 3,5 m/min thread - mm pitch 0,5 - 140 mm thread - inch 1/4 - 56 Gang/ inch. thread - module mm main drive 19 kW clamping length max. 2250 mm total power requirement 24 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 4,0 x 1,65 x 1,75 m controll Siemens 805, for cone turning, contour turning and threat cutting. Machine has MULTIFIX toolholder system size "C", steady and 3 jaw chuck.

Condition: used, Year of construction: 1976, turning diameter over bed 0300 mm turning diameter over slide rest 180 mm turning length 750 mm turning speed range 44 - 1300 U/min spindle bore 41,0 mm quill stroke 105 mm morse taper 3 MK bed width 245 mm Nwsdsxu Nrcepfx Abdjc total power requirement 2,2 kW weight of the machine ca. 1250 t dimensions of the machine ca. 2000 x 1200 x 1500 m We supply the machine with a 3 jaw chuck, a 4 jaw chuck, a face plate, a collet chuck with collets, a quick tool changer with holders and change gears for threat cutting.

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm Nwodpfsxp Rzbex Abdoc speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t dimensions of the machine ca. 3,35 x 1,4 x 1,9 m voltage 400 V connected load 7,7 kVA With chuck, Multifix toolholder and digital readout.

Condition: ready for operation (used), turning length 800 mm turning diameter over bed 330 mm turning diameter over slide rest 170 mm turning speed range 24 - 1900 U/min spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) particularly suitable for medium-precision turned parts - in checked conditions - machinenvideo - ?v=GDoJ0Z7Dckw Nwjdpfexmaktex Abdsc Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - EMERGENCY stop button - Operating instructions

Condition: good (used), Year of construction: 2000, CNC Lathe Okuma LB 300-M Control: OSP-U100L Year of manufacture: 2000 Turning length: 1,000 mm Turning diameter: 430 mm Spindle speed: 4,200 rpm Tool turret: 12 stations (driven) Nedpfx Abeylv Utsdswc Tool holder: VDI 40 Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck Tailstock Parts catcher Short bar loader Samsys 3000 (optional)

Condition: excellent (used), Year of construction: 2021, Haas CL-1 Chucking Lathe Haas Control Swing diameter over the cross slide: 279 mm Swing diameter over the table: 126 mm Maximum cutting diameter: 126 mm Bar capacity: 25 mm X-Axis travel: 305 mm Z-Axis travel: 203 mm Spindle nose: 5C Collet type Maximum spindle speed: 6000rpm Spindle bore: 31.8 mm 2021 220V Electrics Single Phase For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #79157 Machine Serial Number: 3122432 £2,2500.00 Nwodpfx Aeyhzu Iobdsc Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2014, CNC Lathe Okuma LU 3000 EX MY 2SC950 Control: OSP-P300 Year of manufacture: 2014 Max. turning length: 950 mm Max. turning diameter: 340 mm Njdpfx Aboyluvisdowc Max. swing over cross slide: 380 mm Max. swing over bed: 580 mm Max. spindle speed: 4,200 rpm Tool holder: BMT 2 tool turrets A turret: 12 tool stations (all driven) B turret: 8 tool stations Tailstock Chip conveyor Hydraulic power chuck B210/A8 Touchsetter High-pressure coolant pump Enlarged coolant tank

Year of construction: 2008, condition: used, total length: 3,700 mm, total width: 2,200 mm, total height: 1,900 mm, Empty weight: 5.500 kg Price: On request Nwodpfx Aoyk Hg Djbdsc - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: A - Drive system: CNC - Control system brand: Siemens - Control system type: Sinumerik 840D SL - Centre height [mm]: 300 - Swing over bed [mm]: 600 - Carriage turning diameter [mm]: 410 - Distance between centres [mm]: 1200 - Spindle bore [mm]: 90 - Max. spindle speed [rpm]: 3000 - Options: Turret - └ Tool magazine [pcs.]: 8 - X-axis travel [mm]: 1250 - Z-axis travel [mm]: 320 - Transport dimensions: 3700mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, maximum load weight: 16,000 kg, overall weight: 16,000 kg, first registration: 01/2011, loading space length: 7,700 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 2,925 mm, Year of construction: 2011, Wagon no. G0116483_1- Manufacturer: Krone. * Double-decker equipment * Double-decker equipment * Single corner fittings Nwedpfx Absylvuaedjc * Contour marking side/rear * Load certificate Code-XL * Roll-up door (aluminum) * Keyhole system inside * Side walls with keyhole profile * Forklift accessible * Fixed support legs * Device for rail loading * Lashing options Financing on request. Financing possible. NEW paint finish: Color choice in RAL. color possible when ordering ! Long-term rental possible. Delivery time after consultation! Newly painted. Technically ready for use, body and support legs repainted. Substructure (KTL) cleaned and provided with underbody protection. UVV valid. UVV documents available. PAINT NEW !!!. LASI CODE XL !!!. Dimensions are approximate. Offer subject to prior sale, prices net ex location D-59302 Oelde. Further details on consultation by phone or mail:

Condition: used, Year of construction: 1971, functionality: fully functional, Center distance: 2.000 mm turning diameter: 1.200 mm Njdpsynk Srofx Abdewc turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 U/min dimensions: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm Nedpfx Absynk R Ujdowc bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Nsdpfxeynk E Ej Abdjwc Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: used, turning diameter 340 mm Nwodjynbizepfx Abdec turning length 530 mm control Fanuc swing diameter 520 mm Distance between centers 625 mm spindle tunring speed 3.500 U/min spindle bore 78 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2013, feed x/z 20/40 m/min rapid traverse (x/z) 18.000 /30.000 mm/min number of tool places 12 Pos. tool taper VDI 50 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Nodpfjx Ik Tdsx Abdjwc There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2007, Fagor CNC lathe Full specifications available in photos Machine in excellent condition Nedpfx Abeym Ef Rodewc

Condition: used, Year of construction: 1999, turning diameter 1000 mm swing dia. 1250 mm turning length 1300 mm control Siemens Sinumerik 840 D greates pass round over bed 1250 mm swing diameter max. over cross slide 1000 mm swing in the crank max. 1250 mm spindle diameter in front bearing 500 mm faceplate diameter 1250 mm chucking diameter 1250 mm max. torque 1200 Nm 0 80 kw weight of the machine ca. 20 t Spindle speeds: -Speed range 1: 3.15 - 45 - 112 rpm -Speed range 2: 12.5 - 180 - 450 rpm -Torque 12000 Nm Driven tools: -Speed range 50 - 1000 - 2000 rpm Equipment/accessories: Nwjdow Rrb Topfx Abdsc -Various clamping jaws -Tool measuring probe -Chip conveyor -Filter system -Technical documentation

Condition: good (used), Year of construction: 2007, operating hours: 14,500 h, functionality: fully functional, turning diameter over cross slide: 370 mm, turning length: 1,000 mm, turning diameter: 340 mm, spindle bore: 62 mm, spindle speed (max.): 5,000 rpm, total height: 1,900 mm, total length: 3,200 mm, total width: 2,200 mm, overall weight: 7,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA LB300MC1000, OSP P200L control, V12 turret VDI40, V12 driven tools VDI40, manual tailstock, chip conveyor, coolant pump, standard spindle 5000 RPM, touch setter, Nwedpfx Aeymfmnsbdoc

Condition: ready for operation (used), Year of construction: 2017, turning length 4000 mm turning diameter 850 mm turning dia. in gap 1150 mm turning diameter over slide 520 mm Nwedsxabh Tjpfx Abdoc turning speeds 5.0 - 630 U/min quill: 6 MK quill travel 250 mm spindle bore 100 mm workpiece weight max. 4000 kg bed width 600 mm travel -x axis 500 mm travel -z axis 3700 mm rapid traverse X 1800 mm/min rapid traverse Z 3640 mm/min feeds X : 0.04 - 4.8 mm/min feeds Z : 0.08 - 9.6 mm/min feeds Z1 : 0.02 - 2.4 mm/min engine output 20.0 kW weight of the machine ca. 6800 kg. dimensions 6150 x 1500 x 1500 mm good / well-maintained condition (!!) original price at the time approx. 65.000 euros special price on request Description: - particularly heavy, heavily ribbed and wide machine bed - in a rigid one-piece monoblock design - induction-hardened and ground guide prisms - guarantee long-term accuracy and minimal wear - solid headstock - with high-precision, tapered roller bearing main spindle . and 100 mm spindle bore - excellent smooth running at maximum spindle speed - joystick switch for X and Z feed directly on the support - manually switched 4-stage countershaft gear, - powerful main spindle motor enables exact adjustment of the speed . and high torque for heavy machining - rapid traverse for X and Z axes enables quick positioning of the support . and reduces idle times - adjustable overload clutch in the lock case protects the feed mechanism . against damage and failures - central, handy control for feeds and thread pitches - the feed gear offers a wide range of . diametric, inch, module and metric threads - support and top slide are designed for large cutting forces - higher working precision - user-friendly functions Scope of delivery: - SINO position indicator - TOS 3x jaw chuck .. Ø 400 mm - 4-jaw faceplate chuck Ø 800 mm - 4-way tool holder - Fixed steady rest 40-350 mm - Follow-on steady rest 30-120 mm - Fixed centering point - Reducing sleeves - Chuck protection - Coolant device - Machine leveling feet - Work light - Operating tools - Operating instructions

Condition: excellent (used), Year of construction: 2008, CNC Lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of manufacture: 2008 Turning length: 750 mm Turning diameter: 430 mm Swing over bed: Ø 670 mm Swing over cross slide: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret V12 (all stations driven) Equipment: One touch IGF Njdpfx Aoylkgqsbdjwc Chip conveyor Touch setter 3-jaw chuck (Kitagawa B212)

Condition: good (used), Year of construction: 2012, CNC Lathe Okuma Genos L200E-M with gantry Control: OSP-200LA-R Year of manufacture: 10/2012 Nwjdjylkcrepfx Abdsc Max. turning length: 380 mm Turning diameter: 200 mm Turning diameter over bed: 450 mm Spindle speed: 107 - 4,500 rpm Spindle bore: 66 mm Turret: M-V12 (VDI) Tool rotation speed: 50 - 6,000 rpm Rapid traverse m/min: X: 20 / Z: 25 Accessories/Equipment Gantry loader type ATPGR-03 Workpiece dimension Ø 20 - 150 mm, max. workpiece weight 2 x 3 kg (double gripper) for OKUMA Genos L200E-M Chip conveyor Touchsetter Hydraulic tailstock Coolant pump Tool package

Condition: excellent (used), Year of construction: 2011, CNC Lathe Okuma Genos L300E-M incl. bar feeder Samsys M3000SL Control: OSP-P200L-R Year of manufacture: 2011 Turning length: 1,250 mm Turning diameter: 300 mm Spindle bore: 70 mm Turret: 12 positions – all driven Spindle speed: 45 – 4,500 rpm Toolholder: VDI 40 Accessories/Equipment: - Chip conveyor - 3-jaw chuck Ø 250 mm - Hainbuch collet chuck - Touch setter - Tailstock - Coolant pump - Bar feeder Samsys Multi 3000SL Nedeyli T Njpfx Abdewc - Various accessories (see pictures)

Condition: excellent (used), Year of construction: 2011, CNC Turning and Milling Center Okuma LT 2000 EX – M Control: OSP-P200LA Year of manufacture: 2011 Swing diameter over bed: 400 mm Center distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Counter spindle speed: 50 – 6,000 rpm Travels: Z-axis: 700 mm W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001) Equipment: 2 tool turrets, each with 16 stations (all stations live) Touch setter IGF Chip conveyor Bar feeder 3.00 m Main spindle collet chuck Counter spindle three-jaw chuck Parts catcher Workpiece removal system Njdpfxjyli Aks Abdjwc Extraction unit Coolant system with high-pressure pump and paper band filter system