Used Lathe 16 K 20 for sale (68,001)

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Kedpfx Ajzav D Djqijdt Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Excellent Condition Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Fixed Steady x 2 Travelling steady Fully Serviced And Ready For Production Kdedpfxezfguis Aqiot

Condition: like new (used), Year of construction: 2022, The robot is designed for multi-segment roadways, with a minimum travel distance of 6 meters and a total possible travel distance of 20 meters, at a height of 3 meters, using special columns. It is also possible to install the robot on the floor, but this requires minor modifications. Year of manufacture: 2022 Serial number: 1306061 Payload: 16 kg Weight: 296 kg Reach: 2013 mm Kdsdpfx Aezzbctjqiot Control system: KR C4

Condition: good (used), Year of construction: 2012, functionality: fully functional, Hedelius RS 605 K 20, Year of manufacture: 2012, Heidenhain iTNC 530 control unit, Travel range right work area: 420/385/520 mm, Travel range left work area: 1330/650/520 mm, 2-axis NC rotary-swivel table 520 x 420 mm / right, Fixed table 1400 x 600 mm / left, Spindle speed up to 12,000 rpm, Water-cooled milling spindle, Water-cooled A + C axis / rotary table, Tool shank: SK 40, 30-position tool changer, Coolant pressure: 25 bar, Kdedpozm Sfcofx Aqiet Filter system: 500 liters, Partition for pendulum machining, Chip conveyor.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, power: 4 kW (5.44 HP), overall weight: 81 kg, total length: 590 mm, total width: 440 mm, total height: 360 mm, 2 magnetically coupled centrifugal pumps made of stainless steel. ! Price per unit ! Last used for pumping caustic soda. Manufacturer: CP Pumpen AG (Switzerland) Type: MKP 20-15-160 Design: Monobloc with base plate Delivery rate: 5 m³/h (1.38 liters/second) Delivery head / Pressure: 21.1 meters (2.1 bar) Medium temperature: 35 - 40 °C Impeller Ø 153 mm Speed: 2950 rpm Material (casing and impeller): 1.4581 Includes bolts and plug for connecting cable Motor: Siemens Type: 1LE10011BA222FA4 Power: 4 kW Voltage: 400 Volt Efficiency: IE2 Dimensions: Length: 590 mm Width with temperature sensor: 440 mm Base plate width: 330 mm Kdsdewncv Rspfx Aqiot Height: 360 mm Weight: 81 kg Inlet: DN 20 Outlet: DN 15 ! Price per unit !

Condition: used, Year of construction: 1996, Working area X/Y: approx. 6000mm/1400mm, operating voltage: 380V, frequency: 50Hz, rated current: 60A, control voltage: 220V/24V. The machine is fully functional. An on-site inspection is possible. Ksdpsz Aghdsfx Aqiedt

Condition: used, functionality: fully functional, Year of construction: 1980, control type: NC control, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, input voltage: 380 V, input frequency: 50 Hz, overall weight: 19,000 kg, total length: 4,500 mm, total width: 3,200 mm, total height: 2,900 mm, number of support arms: 2, We are offering a reliable LVD Hydraulic Shear, Model MG-31/16-20, at a very attractive price. Key specifications: • Cutting capacity: Up to 20 mm • Year of manufacture: 1980 • Weight: 19,000 kg Kdjdoxg I T Nopfx Aqiot • Transport dimensions: 2350 x 4300 mm, height 2900 mm • Location: Slovenia This is a solid, proven machine that’s ready for heavy-duty use.

Condition: excellent (used), Year of construction: 2012, Technical Data: Kdsdpfx Aqsx Ii Hveiot Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1989, centre distance 2000 mm 600 weight of the machine ca. 3,2 t Kdjdsyi Hvvjpfx Aqiot Passage 49 mm Digital Lynette

Condition: like new (used), Year of construction: 2022, Track width: 6 m Year of manufacture: 2022 Serial number: 1306065 Payload: 16 kg Reach: 2013 mm Weight: 296 kg Kdedpfxjzzbddo Aqiet Number of axes: 6 Control system: KR C4

Condition: like new (used), Year of construction: 2022, Year of manufacture: 2022 Serial number: 1306064 Kdedpfjzzbd Rox Aqist Payload: 16 kg Reach: 2013 mm Axes: 6 Controller: KUKA KRC4

Condition: good (used), Year of construction: 2009, functionality: fully functional, For sale is our Reis welding robot in good condition. The welding robot is being offered complete with enclosure and is available immediately. (Technical data can be found in the photos) Type: Reis RV 20-16 Control and operator unit PHG 10-2 The system is located at our facility in Hungary / 2699 Szügy and will be sold from site. (Disassembly possible after consultation with buyer) We would be happy to welcome you for an inspection and demonstration of the system (by appointment). The system is sold with an unperforated welding table only!!!! (see last photo) The perforated version is not included in the sale. Kdedewra S Dspfx Aqiet

Condition: like new (used), Year of construction: 2022, Robot installed on a two-segment track, with each segment 6 meters long, allowing a total travel distance of 12 meters, at a height of 3 meters, on special columns. Installation of the track on the floor is also possible, but requires minor modifications. Kodpfozzbbvjx Aqiedt Manufacturing date: 2022 Serial number: 1396062 Weight: 296 kg Payload: 16 kg Reach: 2013 mm Control system: KR C4

Condition: good (used), amount 1 STK Dimensions (HxWxD) 280 x 190 x 190 mm diameter 60 mm -> Bestcut gear hobbing cutter with HSS cutting material - Chip angle < 8° Kodpfx Aqjzuum Eoisdt -> Module 16 F.20° 1gg Lks -> BP IV D-Stg < 5°40' -> 5° 40' Sp Stg 00

Year of construction: 2011, condition: excellent (used), functionality: fully functional, For sale is a climate test chamber KPK 200. The unit is in very good condition and ready for immediate use. Kodpfx Aoy E Ilxeqisdt Technical data: Year of manufacture: 2011 Test chamber nominal volume: 280 dm³ External dimensions of chamber: 1500 x 2040 x 1075 mm Minimum installation dimensions: 2060 x 1095 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Number of shelves: 3 units Maximum permissible load: 90 kg, evenly distributed across 3 shelves Maximum load per shelf: 30 kg Test chamber material: Stainless steel Wst.-Nr. 1.4301

Condition: excellent (used), Year of construction: 2018, operating hours: 25 h, functionality: fully functional, overall weight: 270 kg, load capacity: 16 kg, Robot fully functional. Robot complete with accessories. Ksdpfx Aeyrd Rijqisdt

Condition: new, Year of construction: 2022, Manufacturer: RBC Robotics GmbH Type: Automation Brose oKMV Year of manufacture: 2022 Machine no.: 20380 Length: approx. 20,000 mm Width: approx. 1,500 mm Height: approx. 3,000 mm Number of robots: 5 Power supply: 3 × 400 V + N + PE / 60 Hz Power: 57 kW Max. fuse: 100 A Kjdozuy Ibopfx Aqisdt Control voltage: 24 V DC Mains system: TN-S Max. short circuit current: 10 kA Pneumatic operating pressure: 6 bar Weight: 25 t Equipment: Production part collection and transfer stations KUKA industrial robots: Manufacturer: KUKA Series: CYBERTECH-2 Model: KR 16 R2010-2 / SEL Number of robots: 5 Year of production: 2022 Number of axes: 6 Payload: 16 kg Reach: 2013 mm Weight: 296 kg

Condition: excellent (used), Year of construction: 2005, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The KR16 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16 (KR16-2 Foundry option is also available) Condition: Used & Tested Year: 2005 (more options are also available) Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ED05 Control Cabin + All Wire Sets + Teach Pendant - FULL SET Kdedpfew Idvwjx Aqiet Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors) Kdodeztpw Nspfx Aqijt

Condition: excellent (used), Year of construction: 2013, Krauss Maffei KM 1600–17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 General description Modern injection molding machine equipped with a fully hydraulic clamping unit. The machine features an advanced MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Operation is performed via an integrated, 19-inch control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Plasticizing unit Complete unit for processing thermoplastic materials Screw diameter: 135 mm Version with wear-resistant (abrasion-resistant) protection Check valve Open nozzle Technical data Clamping unit Clamping force: 16,000 kN Opening force: 1,120 kN Dimensions of clamping plates (width × height): 2550 × 2100 mm Distance between columns (width × height): 1870 × 1420 mm Opening stroke: 2700 mm Mold height (min.–max.): 700–1600 mm Maximum daylight: 3400 mm Kedpfszrgfhjx Aqijdt Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection unit Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Injection weight for PE: 6860 g Screw speed (nominal / maximum): 81 / 100 rpm Electrical and hydraulic equipment Main motor power: 160 kW Installed heater power: 93 kW Number of heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 cycles/h Oil tank capacity: 2400 l Dimensions and weight Net weight (with control cabinet): 92 t Machine dimensions (length × width × height): 14.17 × 4.04 × 2.93 m

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, 1 x Parts Washing Machine Kraft K 20 Year of manufacture: approx. 1990 In very good condition Kdsdpex Hffrefx Aqiet Technical data: Drum capacity: 40 litres 24 rpm Dimensions (L x W x H): 0.7 x 0.8 x 0.65 m The machine can be inspected under power.

Condition: excellent (used), Year of construction: 2008, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The KR16 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16 Condition: Used & Tested Year: 2008 (more options are also available) Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ED05 Control Cabin + All Wire Sets + Teach Pendant - FULL SET Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 500 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. Kdedpfsw Idvksx Aqist (Source: KUKA's Website)"

Condition: ready for operation (used), Year of construction: 2010, operating hours: 1,628 h, functionality: fully functional, machine/vehicle number: W09WOM125ADW76457, operating pressure: 2,800 bar, total length: 440 mm, total height: 205 mm, total width: 194 mm, empty load weight: 2,260 kg, fuel: diesel, overall weight: 2,700 kg, fuel tank capacity: 300 l, rotational speed (max.): 1,800 rpm, rotational speed (min.): 900 rpm, Equipment: chassis, Used water high-pressure unit WOMA Ecomaster MK3 250M (plunger Ø16mm) with DEUTZ TCD 2012 engine. Maximum working pressure: 2800 bar Maximum flow rate: 20 l/min Pump operating hours under pressure: 1077 h Kedpoy Nmm Njfx Aqijdt Engine operating hours: 1628 h Year of manufacture: 2010 Condition: very good – ready for work Used additional equipment: 2 x 20m UHP hose DN8 (3000 bar), 1 x 5m UHP hose DN5 (3200 bar), 1 x control cable, 1 x control cassette, 2 x UHP high-pressure guns (3000 bar), WOMA technical documentation, 2 x spare wheels Original WOMA superstructure. Regular maintenance carried out. Complete gearbox replacement under WOMA warranty in 2015 (relevant documents available). Trailer registered and paid (valid technical inspection).

Condition: used, axle configuration: 3 axles, first registration: 07/2000, color: other, Year of construction: 2000, Empty weight: 3.940 kg Axle 1: left 6 mm right 6 mm Axle 2: left 5 mm right 5 mm Axle 3: left 6 mm right 6 mm Kdjdpfjwycwrjx Aqist We have the possibility to stack trailers!

Condition: used, clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Clamping sleeves: length 80 mm, 5 pieces -Sizes: Ø 15/16/20/25/30 mm -Price/Delivery: complete Ksdeu S Tbzspfx Aqiedt -Transport dimensions: 140/90/H80 mm -Weight: 1.8 kg