Used Front Lathe for sale (22,844)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2X396C50046, Year of construction: 2012, operating hours: 15,892 h, load capacity: 8,000 kg, lifting height: 4,900 mm, fuel type: diesel, mast type: duplex, fork length: 1,490 mm, TECHNICAL DETAILS Load capacity: 8,000 kg Lift height: 4,900 mm Overall height: 3,550 mm Fork dimensions: 1,490 mm x 2,120 mm Maximum fork width: 2,120 mm Minimum fork width: 310 mm MACHINE DETAILS Number of wheels: 6 Mast: Duplex Engine manufacturer: Deutz Dimensions & Weight Dimensions (L x W x H): 3,380 mm x 2,260 mm x 3,550 mm Gijdpfx Ajyx S Nneh Ner Weight: 12,600 kg Drive: Diesel Operating hours: 15,892 h EQUIPMENT 3rd + 4th valve for fork carriage Radio Heater Full cabin Work lights CE marking Documentation

Condition: good (used), Year of construction: 1970, Centre height over bed: 2,100 mm Centre distance: 15,000 mm Faceplate (table) diameter: 3,500 mm Maximum swing diameter over faceplate: 3,120 mm Maximum swing diameter over bed: 4,150 mm Maximum swing diameter over carriage: 3,600 mm Maximum workpiece weight between centres: 180 t Bed width across guideways: 4,200 mm Bed height: 900 mm Bed length incl. headstock: 22,400 mm Spindle diameter at front bearing: 700 mm Tailstock quill diameter: 620 mm Faceplate speed range: 0.15 – 40 rpm Balancing device Electrical balancing via generator brake system and compensation weights in the headstock. Maximum balancing values per speed range: I: 7,500 kgm Giedpfx Aoyz Urdsh Njr II: 2,850 kgm III: 1,250 kgm IV: 480 kgm The unit can be deactivated during standard turning operations. Crankpin machining group This unit is mounted on the support and enables: Minimum distance between spindle axis and centre of rotary ring: 700 mm Maximum offset for crankpin machining: 1,000 mm Steady rest Workpiece diameter: 500 – 1,000 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, Control: SIEMENS 840D PL ManualTurn Giodpfjyz Un Sox Ah Nor turning diameter: 1.140 mm turning lenght: 4.200 mm turning diameter over slide: 800 mm faceplate diameter max.: 1.000 mm Support Length of the bed slide: 1.000 mm Travel of the cross slide: 650 mm Width of the cross slide: 425 mm bed width: 710 mm Main Spindle spindle bore: 120 mm spindle diameter in front bearing: 190 mm Accessories Fix steady rest 10 pieces Multifix quick-change steel holder Typ D The machine has been general overhauled in 2007.

Condition: used, Year of construction: 1971, functionality: fully functional, turning diameter over bed: 900mm turning diameter over slide rest: 800 mm Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 min-1 dimensions (LxWxH), approx.: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements Giodeyz Umzepfx Ah Ner

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning length: 1.500 mm Giodsyz Ulwepfx Ah Njr turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2006, functionality: limited functionality, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Giodpfxoyz Udto Ah Njr Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: like new (used), Year of construction: 1997, functionality: fully functional, center height: 150 mm, center width: 630 mm, spindle bore: 40 mm, turning diameter: 340 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, overall weight: 1,450 kg, Schaublin 150A Draai bank Specificatie Manufacturer Schaublin Type 150 Year of manufacture 1997 Besturing conv. Max draaidiam. 340mm Gisdpfx Ahowgd R Hs Nor Distance between centers 630 mm Hoofdspil Toerental 55 tot 3000 omw/min Opname Camlock D1-4" Spantangopname Schaublin B32 Extras Multifix B plus 7pcs reedschaphouders 3 and 4 klauw Tegencenter Spantang set Koelmiddel inst. Heidenhain DRO (2-aces) Machine lamp Conusliniaal Fast chip installation Vaste en meelopende bril Enz.

Condition: excellent (used), functionality: fully functional, center height: 150 mm, center width: 630 mm, spindle bore: 40 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 14 rpm, overall weight: 1,500 kg, Equipment: rotational speed infinitely variable, Schaublin 150A Lathe Specification Manufacturer: Schaublin Model: 150 Year: unknown Control: conventional Max. turning diameter: 340 mm Giedpjx Ddamefx Ah Nor Distance between centers: 630 mm Main spindle Speed: 14 to 3000 rpm Spindle mount: Camlock D1-4" Collet mount: Schaublin B32 Extras Multifix B plus 5 tool holders 3- and 4-jaw chuck Tailstock Collet set B32 Coolant system Heidenhain DRO (ND780, 3 axes) Machine lamp Reduction gearbox Quick-clamping device Etc.

Condition: ready for operation (used), functionality: fully functional, turning diameter: 330 mm, center height: 165 mm, spindle bore: 40 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 40 rpm, total height: 1,400 mm, total length: 1,900 mm, total width: 850 mm, 3-phase 380V motor is running fine! 12 spindle speeds adjustable from 40 up to 2500 RPM. Geared headstock, gears running in oil. Power feed in both longitudinal and cross directions. Thread cutting, thread dial installed. Foot brake pedal. Long bed version. E-Stop. Spindle safety guard. Splash guard. Coolant pump. Metric lathe. Made in the UK. MT3 tailstock quill. Camlock spindle nose. Quick change toolpost. Distance between centers: 1100mm Center height: 165mm Spindle bore: 40mm Gsdeyzkaqjpfx Ah Nsir Overall dimensions: 190x85x140 cm Includes all accessories as shown in the pictures in front of the lathe. Contact us for shipping possibilities! € 4,250.00

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Gedpfeyyk I Eox Ah Neir Year of manufacture: 2007 Internal machine no.: 26 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Swing diameter over carriage: 410 mm Spindle bore: 72 mm Spindle speed: 45 – 5,000 rpm 2 tool turrets A turret: 12 tool positions (live tooling) B turret: 8 tool positions Equipment: Tailstock Transformer Touch setter Chip conveyor OneTouch IGF

Condition: used, functionality: fully functional, Lead and feed screw lathe Manufacturer: CMT Tortona, Italy, Model Ursus 225 Technical Data Brand: CMT Tortona, Italy Model: URSUS 225 Year of manufacture: unknown Control: conventional Distance between centers: 1000 mm Swing over bed: 450 mm Spindle bore: 52 mm Dimensions: L 2.50 x W 1.0 x H 1.40 m Machine weight: approx. 3 t Equipment - Three-jaw chuck, make Klopfer D 250 mm Giedpfx Ahjyznans Nor - Chip tray - Live center - 3 tool holders All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2014, 2014 Citizen M32-Vlll 15 Axis CNC Sliding Headstock Automatic Lathe With Iemca Boss 338-HD/R 37LL Barfeeder - With Cool Blaster CB510 high Pressure Coolant System, Tooling In Machine, Parts Catcher, Absolent A.mist10S Mist Extraction Unit, Nobel Fire Suppression Unit, Signal Tower & Manuals. Iemca Boss 338-HD 37LL Bar Feeder Length 4,600mm, S/No. 021522NA06 (2015). Gjdoyx H A Nopfx Ah Neir Max Machining Ø32mm. Max Machining Length 320mm(1/Chucking) . Max Front Drilling Ø12mm. Max Front Tapping M10. Through Spindle Ø36mm. Max Main Spindle Speed ​​8,000rpm (Motor 3.7/7.5kW). Max. Drilling Diameter For The Gang Rotary Tool Ø8mm. Max. Tapping Diameter For The Gang Rotary Tool M6. Spindle Speed Of The Gang Rotary Tool 6,000rpm (1kW Motor). Max. Drilling Diameter For The Turret Rotary Tool Ø10mm. Max. Tapping Diameter For The Turret Rotary Tool M8. Spindle Speed Of The Turret Rotary Tool 6,000rpm (0.75/1.5kW Motor). Max. Drilling Diameter For The Back Spindle Ø10mm. Max. Tapping Diameter For The Back Spindle M10. Back Spindle Speed 8,000rpm (2.2/3.7kW Motor). Max. Drilling Diameter For The Back Tool Post Rotary Tool Ø8mm. Max. Tapping Diameter For The Back Tool Post Rotary Tool M6. Spindle Speed Of The Back Tool Post Rotary Tool (1kW Motor). Max. Chuck Diameter Of The Back Spindle Ø32mm. Max. Protrusion Length Of The Back Spindle Workpiece 65mm. Max. Protrusion Length 145mm. Number Of Tools To Be Mounted 31+ α. Gang Tool Post 5. Gang Rotary Tool 4. Gang B Axis Rotary Tool 3. Number Of Turret Station 10. Back Tool Post 9. Tool Dimension Tool (Gang Tool Post) 16 x 16mm. Sleeve φ25.4mm. Chuck And Bushing Main Spindle Collet Chuck FC081-M, Back Spindle Collet Chuck FC081-M-K, Guide Bushing FG531-M. Rapid Feed Rate All Axes (Except ‘X2 & Y2’) 32m/min, ‘X2’ Axis 18m/min, ‘Y2’ Axis 8m/min, ‘Y3’ Axis 32m/min. Centre Height 1,150mm. Input Power Capacity 20kVA. Weight 3,650kg. S/No.P30498 (2014).

Condition: used, Year of construction: 2000, functionality: fully functional, overall weight: 800 kg, chuck outer diameter: 800 mm, mount diameter: 520 mm, bolt circle diameter: 436 mm, cone mount: 286 mm, Pos. 1.0) Chuck diameter ø 800mm Three-jaw power chuck with 6 clamping jaws Manufacturer: SMW-Autoblock ø 800HL-6GR incl. Flange size 11: SMW Autoblock: 241261 FF2 Thread connection for draw tube: Workpiece clamping via jaws: Pneumatic or hydraulic operation. Incl. bolt-on jaws with serrated interface: Weight: approx. 700kg Giedpsy Appmsfx Ah Nsr Good condition, low operating hours. ----- Pos. 1.1) Optional flange available Mounting diameter: 520 mm Bolt circle: 436.6mm; M24 Taper: KK 15: 285.78mm Width: approx. 40mm Weight: approx. 60kg _____ SMW-800HL description Suitable for clamping thin-walled workpieces. Designed for horizontal CNC lathes. Adjustable to 6 jaws. STANDARD EQUIPMENT Power chuck with mounting bolts, Incl. set of bolt-on jaws Low maintenance due to sealed design (Proofline series chucks). 6-jaw power chuck _____ Pos. 2) 3-jaw power chuck ø 800 mm Manufacturer: FORKARDT: Jaw interface: Serrated Size: to be provided Thread connection for draw tube: on request Spindle adapter flange for machine: on request Price incl. shipping: on request

Condition: ready for operation (used), Year of construction: 1990, spindle bore: 37 mm, turning diameter: 360 mm, turning length: 750 mm, overall weight: 1,600 kg, 2-axis Acu-Rite DRO; spindle bore 37 mm; variable spindle speed up to 3000 rpm; working capacity 750x360 mm; Multifix tool turret Giedsydydcepfx Ah Njr

Condition: used, Technical details: faceplate diameter: 1400 mm swing diameter: 2000 mm turning height: 1270 mm main drive: 80 kW faceplate speeds from - to: 1 - 355 U/min max. workpiece weight: 6.000 kg milling motor: 37 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 (8 x 100 mm) mm ram head dimension: 240 x 240 mm max. ram stroke: 1250 mm weight of the machine ca.: 50 to total power requirement: 133 kVA dimensions of the machine ca.: 11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories Gijdpfxevb Dcmj Ah Nsr *

Condition: excellent (used), As-new tool holders for DECO 20 - DECO 26 3 pieces - TORNOS fixed tool holders for X1Y1; X2Y2; X4Y4 ----- Gjdpfoy Apn Aex Ah Nsir - Turning tool holder for 16x16 mm tools: - Price per holder: €180.00 each fits DECO2000 ø20 & 25mm, DECO 20 and DECO 26 3 with front plate 1 without front plate ----- Shipping within Germany €12.00 Shipping within EU €25.00 Additionally, we have 6 spindle reduction sleeves: were used in DECO 26mm inside-ø 8.0mm; ø 12.0mm; ø 21.0mm; 3x ø 26mm outside-ø 30mm, thread M32x1.5, approx. 360mm length flange-ø outside 45mm x 9mm, 4x M4 threaded holes 2x 8 mm keyway Special price for all 6 reductions including shipping: €380.00 We are happy to send photos upon request; for this, we require your email address.

Condition: used, Brand: Johnford Model: ST-70 AH+CF+Y Year: 2013 Gedey Atv Djpfx Ah Njir CNC: Fanuc 21i-TD Maximum workpiece diameter above the bed: 920 mm Maximum diameter over bed: 700 mm X-axis travel: 370 mm Z-axis travel: 1600 mm Y-axis travel: ± 0.75 mm Driven transmission + Y-axis TBYA 250 turret (12 positions) - 3276 rpm / 37 kW 3G hydraulic chuck Ø 304 Programmable hydraulic control with rotary cable Chip ejector Bar capacity: 91 mm A2-8 spindle / 2500 rpm / 22-26 kW Machine in very good condition.

Condition: good (used), Year of construction: 2002, CNC multi-spindle lathe Manufacturer: INDEX Machine model: MS 42C Control: Siemens SINUMERIK 840C Year of manufacture: 2002 Number of controlled axes: 12 Gsdpfoy Ak S Nex Ah Njir Number of spindles: 6 TECHNICAL DATA Spindle - Bar passage (mm): 42 - Max. speed (rpm): 5,000 EQUIPMENT FEATURES + 12 linear axes + Central coolant system + Central automatic lubrication

Condition: excellent (used), Year of construction: 2011, Centre height: 330 mm Swing over bed: 660 mm Swing over cross slide: 430 mm Distance between centers: 1500 mm Bed width: 400 mm Spindle mount DIN 55029: A 8 Spindle bore: 82 mm Speed range, 3 steps: 7 – 135, 30 – 550, 110 – 2200 rpm Feed rate X/Z: 3000 / 6000 mm/min Rapid traverse X/Z: 4 / 8 m/min Tailstock quill taper: MK 5 Drive power: approx. 9 kW Dimensions (L x W x H): 3450 x 1750 x 1770 mm Weight: 2850 kg Equipment / Special features: • Cycle control FAGOR 8055-i A TC with TFT color display • Electronic handwheels • Interface • 4-position tool turret, programmable change via motorized drive • 3-jaw chuck, make BISON, diameter 300 mm • Full enclosure, sliding doors with electric safety interlock • Coolant system • Air-conditioning for the control cabinet • Central lubrication • Machine feet Giedpjl D Rddjfx Ah Njr • Lighting • CE conformity Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1956, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe Gedpfx Ash Uuzyeh Njir -Manufacturer: Meuser, lead screw and feed screw lathe type M3A -Turning length: 1400 mm -Turning diameter over bed: 550 mm -Turning diameter without bed: 800 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools (see photos) -Tailstock mount: MK5 -Dimensions: 2770/1160/H1310 mm

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, XYZ CT 65LTY (Live Tooling & Y Axis) Siemens 828D Control Manufactured & Installed in 2022 Hydrafeed Multifeed Short Magazine Bar Feed Bar Support Unit VDI Live Tooling Holders Supplied Swarf Bin Supplied Machine Stroke: Max’ Swing 400mm Max’ Turned Dia’ 220mm Max’ Turned Length 490mm X Axis Travel 220mm Y Axis Travel 70mm (+/-35mm) Z Axis Travel 500mm Spindle: Spindle Nose A2-6 Spindle Bore (Drawtube Capacity) 65mm Spindle Speeds to 4,000rev/min Spinlde Motor 17kW Feeds: Rapids 20m/min Cutting 10m/min Slideway Type Hardened Boxways Gjdpfx Ajyvqfpeh Njir Turret: Turning Tool Shank 20 x 20mm Turret Type VDI 30 Power Turret No. Of Stations 12 Live Tool Max 4500rev/min Max’ Borning Bar Dia Ø32mm General: Tailstock MT4 Quill Dia’ 75mm Coolant Tank Capacity 80l Coolant Pump Delivery 30L/min Machine weight 4.4ton Footprint 3,300 x 2,270, 2,270mm/min Power Requirements 45amp Supplied with: Hydraulic 200mm 3 Jaw Power Chuck Hainbuch Collet Chuck & Collets Sauter ‘German’ VDI Turret Parts Catcher Through Tool & Flood Coolant Remote Electronic Handwheels USB Ports Networking Renishaw Automatic Tool Setting Arm Swarf Conveyor & Bin Programmable Hydraulic Tailstock For Sale Jet Machinery Ltd Jet Machinery Stock No: #79163 Machine Serial Number: STP20155 Cost: £72,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Godpfeyvqdfsx Ah Noir Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, spindle bore: 52 mm, turning diameter: 410 mm, turning diameter over top slide: 255 mm, turning length: 1,000 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 45 rpm, Turning diameter in gap: 540 mm, Very neat and barely used center lathe, including: digital readout, coolant system, fixed steady rest, traveling steady, quick-change tool post type Multifix B, 3-jaw chuck, independent 4-jaw chuck, faceplate, adapter sleeve for main spindle with various centers. Gsdpfxsyzb N Ae Ah Noir

Condition: like new (used), Year of construction: 2017, functionality: fully functional, spindle bore: 105 mm, turning diameter: 500 mm, turning diameter over top slide: 300 mm, center height: 250 mm, turning length: 1,500 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 36 rpm, overall weight: 2,800 kg, Very neat and hardly used centre lathe including: digital readout, coolant system, fixed steady, travelling steady, quick-change tool post type Multifix C, 3-jaw chuck, independent 4-jaw chuck, faceplate, spindle sleeve and various centres. Giedeyzb Ixopfx Ah Nor

Condition: good (used), turning diameter over cross slide: 530 mm, spindle bore: 90 mm, turning diameter over bed slide: 800 mm, center height: 400 mm, Poreba TPK 80 x 4000mm Heavy Duty Lathe Model: TPK 80/4m Swing over Bed: 800mm Swing over Cross Slide: 530mm Swing in GAP: 1080mm Distance Between Centres: 4000mm Spindle Bore: 95mm dia. Spindle Speeds: 800 RPM Machine with: Fixed Steady Godpfsyimzaox Ah Neir