Used Fss 400 for sale (19,120)

Condition: good (used), lifting height: 38,260 mm, fuel type: diesel, General information Year of manufacture: 2016 Weights Empty weight: 16.100 kg Functional Lifting capacity: 600 kg Working height: 4.026 cm Dimensions of cargo space: 974 x 253 x 378 cm Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 3108 m Max swing of platform in degrees: 250 Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: T 400 Year of build: 2016 Condition: Used Data: Max. working height: 40,26 m Max. platform height: 38,26 m Max. reach: 31,08 m Total dimensions LxWxH: 9,74 x 2,53 x 3,78 m Platform dimensions LxW: 2,41 x 0,97 m Max. basket load: 600 kg Swivel range: 250° Ground clearance: 0,22 m Support width both sides: 6,60 m Support width one side: 4,77 m Support width: narrow 2,86 m Support length: 6,37 m Ground pressure: 150 kN Hsdpfx Abjyvzy Deusw Driving license category: C / 2 Empty weight: 16.100 kg Total permissible weight: 18.000 kg Special features: Tilt 2°, Rotatable work basket 2x 90° (hydraulic), Basket arm, Rotation angle 180°, WITHOUT roof protection, Loading area with side panels, Telescopic basket arm allows working over obstacles, Computer-assisted stabilizer automation, PPE attachment points available, Material box 1.81 x 0.81 m. Information: TÜV and UVV new

Condition: used, mast type: telescopic, Equipment: all wheel drive, General information Year of manufacture: 2006 Drivetrain Drive: Wheel Weights Empty weight: 6.083 kg Functional Lifting capacity: 230 kg Hsdpfx Abswc Sppsusw Working height: 1.420 cm Dimensions of cargo space: 785 x 232 x 238 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 1220 m Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 400S Year of build: 2006 Condition: Used Data: Max. working height: 14,20 m Platform height: 12,20 m Max. reach: 11,00 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,83 x 0,91 m Swivel range: endless Max. climbing capacity: 45 % Total dimensions LxWxH: 7,85 x 2,32 x 2,38 m Movable up to working height: 14,20 m Wheel pressure max.: 33 kN Ground clearance: 0,25 m Drive type: Diesel Own weight: 6.083 kg Special features: Rotating work basket, all-wheel drive, pendulum axle, permanently installed generator with 230 V socket in the basket.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Model: TB-OH 9/2 400/3/50 Year: 2016 400V, 50Hz, 9.8kW, 15A Weight: 130 kg Hsdpfs Aaaqqex Abujw

Condition: used, Osai Neomark 400 Nd-YAG Laser Marking Machine The NeoMark 400 Performance system was developed for printed circuit board marking. By completely eliminating mechanical movements of the laser, extremely high-resolution markings are possible. The internal conveyor belt is designed to perform width registration for various card types up to a side length of 320 mm. The user interface consists of a console with a separate keyboard for controlling the laser source, the control systems, the marking systems, and the automation responsible for card movement via a PC. The NeoCut management software, developed based on NC², the control software of the NEO family, is a simple and intuitive interface for programming the machine and subsequent production monitoring. Hsdpfx Asxbck Esbujw The Neomark is also equipped with an extraction system that can be connected to an external extractor or a central extraction system to collect the fumes and dust generated during the process. Main features: Manufacturer: Osai Type: Marking Laser GIOTTO Laser Type: Neomark Y400 Power: 500 W Voltage: 230 V Rated frequency: 50 Hz ± 2 % Maximum electrical absorption: 4 kW Minimum flow rate for pneumatic system: 20 Nl/min Working area: up to 320 x 320 mm Laser safety class: Class 1 (EN 60825-1) Access to the working area: Front door with laser filter Loading and unloading of the printed circuit board PC with LCD monitor and keyboard Dimensions: 1200 x 1310 x 1800 mm Weight: approx. 1300 kg Laser completely rebuilt Motor of the beam expander renewed All hoses for cooling renewed More items - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2016, operating hours: 6,100 h, condition: ready for operation (used), functionality: fully functional, Terex Pegson Premiertrak 400 2016 year 6100 hours Inlet 1100x700 mmTerex Pegson Metrotrak 900x600 2016 year 6100 hours Inlet 1100x700 mm Engine Scania DC09 CSS range from 0-65 to 0-150 mm Capacity 150-250 tons per hour depend on material Weight 45 tons Hsdpfsxvcdujx Abujw Fitted with side conveyor Fitted with overband magnet Fitted with belt scale Machine in great working condition, ready for work like NEW

Condition: excellent (used), CATALOGUE NUMBER 8129 Technical data: - diameter of circular saw blades 500mm Hedpsz U Ihzefx Abusw - spindle diameter 60mm - max. diameter of material being cut 380mm - min. thickness of material being cut 100mm - max. thickness of center prism 160mm - min. thickness of center prism 60mm - max. number of saw blades: 2 pieces per motor - motor power 4 x 7.5kW/400V, 50Hz - speed 1450 rpm - feed motor 1.5kW - manual table lifting up to 80mm - feed speed on frequency inverter 0-8m/min - output approximately 40 m³/h - dust extraction nozzle 2 x 150mm - dimensions (L/W/H) 6150x1350x2000mm - weight approximately 2000kg ADVANTAGES - Made in Poland, drewMET brand - 4000mm track - Unpainted – used machine, very good condition Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7794 TECHNICAL DATA Hjdpfxez Nhi Uo Abuow - inlet width 530mm - inlet height 200mm - shaft diameter 370mm - shaft width 510mm - knife length 510mm - number of knives 2 pcs - automatic reversing – with adjustable settings - screen dimensions 50x50mm - toothed draw roller (bottom) 1.5kW - toothed draw roller (top) 1.5kW - main motor power 30kW - feeding table with vibratory feeder / vibratory feeder length 3900mm - vibratory feeder width 500mm, 1.5kW - receiving conveyor length 5000mm - conveyor belt width 380mm - hopper with discharge chute for chips 2500x3020x2200mm - platform 4650x750x1770mm - machine dimensions with conveyor and vibratory feeder (length/width/height) 8900x1200x2550mm - weight approximately 6000kg ADVANTAGES - automatic reversing with adjustable settings - with 3900mm vibratory feeder – with 5000mm conveyor - German production – very good condition – used shredder Net price: 88900 PLN Net price: 20674 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7906 Technical data: - track width 400mm - working width of the roller 400mm - max. blade diameter 450mm - blade bore diameter 70mm - max. cutting height 160mm - table width with extension 720mm - table length 1900mm - from above: - feed fingers/ejectors 2 rows - sliding roller, metal, pressure roller - feed fingers/ejectors - sliding roller, metal, pressure roller - saw mandrel - smooth sliding roller, metal, sliding - from below: - guide rail - feed fingers - track - electric body lifting - central track lubrication - 2 feed speed types + stepless - feed motor 0.9kW - main motor 30kW - diameter of the dust extraction nozzle 260mm - overall dimensions (L/W/H) 2350x1800x2200mm - weight approx. 2000kg ADVANTAGES – Made in Italy – New track and slides – Very good condition – Used multi-blade saw Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations) Hsdpfxszx Rqhe Abuew

Condition: used, Year of construction: 2013, ZIPPEL REMA K1 400 3 LB Industrial parts cleaning system (washing system) Year of manufacture: 2013 Washing, rinsing, and drying in a continuous system with a washing basket to remove oils, chips, and dirt from workpieces before further processing or assembly. Approved according to WHG (German Water Resources Act). System is currently powered. System description, technical data & plans – see PDF. All technical specifications, illustrations, and content are non-binding and without warranty. Subject to change and errors. All other accessories visible in the photos are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation, and on the invoice. EXW (Ex Works) D-92729 Weiherhammer Exclusively disassembly, removal, and loading Hjdpe Afc Hrsfx Abusw Delivery time: immediately Subject to prior sale / Payment due immediately upon purchase.

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Hedsvvi N Ispfx Abuow

Condition: used, functionality: fully functional, For sale: a three-phase electric motor, KSB, powered by WEG, model AL132S-02, with foot mounting and a mounting flange. The motor has been inspected and is in full working order, ready for use. Hedpfx Aboz Sy Rcsujw Technical specifications: - Power: 5.5 kW - Voltage: 400 V Δ / 690 V Y - Frequency: 50 Hz - Rotational speed: 2930 rpm at 400 V - Rated current: 10.0 A / 5.81 A - Efficiency class: IE3 - Protection class: IP55 - Insulation class: F - Duty type: S1 – continuous operation - Ambient temperature: up to 40°C - Date of manufacture: 02.05.2016 - KSB part number: 01629115 Condition: used, fully functional. Visible signs of use.

Condition: used, functionality: fully functional, For sale: an industrial submersible pump, Flygt 2610.171, designed for pumping water and drainage applications. The pump’s capacity is 40 m³/h, which is 40,000 liters per hour. The actual flow rate depends on the lift height and installation conditions. The pump is equipped with a float switch, a power cable, and a control module with a CEE power plug. A carrying handle facilitates transport and lowering of the unit, and the lower suction basket prevents larger debris from entering the pump. Hedoz S Nbwjpfx Abujw Technical specifications: Manufacturer: Flygt / ITT Water & Wastewater AB Model: 2610.171 Capacity: 40 m³/h – 40,000 l/h Power rating (as per nameplate): 1.2 kW Power supply: three-phase Voltage: 400 V star (Y) / 230 V delta (Δ) Rated current: 2.7 / 4.7 A Frequency: 50 Hz Rotational speed: 2740 rpm Operating mode: S1 – continuous operation Ingress protection: IP68 Maximum medium temperature: 40°C Power factor cos φ: 0.85 Weight: approximately 19 kg Made in: Sweden Included in the set: Submersible pump Float switch Power cable Control module with switch and indicator lights CEE power plug

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Hedpfx Aouzn Nnsbuew Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: new, width of the strips 200 mm band length 1490 mm band speed 8.0 m/sec motor 400 Volt loading area 500 x 280 mm total power requirement 1.5 kW Dimensions (HxWxD) 750 x 600 x 340 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley Hjdpfx Aoxaapvobuew - Machine base - Connection cable + plug - Instruction manual in German

Condition: used, saw blade diameter 400 mm cutting diameter 135 mm capacity 90 degrees: flat 280 x 70 mm capacity 90 degrees: square 120 x 120 mm capacity 45 degrees: flat 210 x 55 mm capacity 45 degrees: square 105 x 105 mm turning speeds max. 3000 U/min saw-blade dia. 400 x 3,2 x 40 mm motor 400 Volt total power requirement 4,0 kW weight 650 kg range L-W-H 910 x 1200 x 1700 mm Furnishing: - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below Hedjxabg Aopfx Abuew - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping - Operation manual

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Hjdow Rm Saepfx Abusw Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: new, Number of sanding units 1 St. Hodpfx Aboytx Ufouow Profile width 390 mm Profile height max. 390 mm

Condition: excellent (used), Ulma HRX-400 heat tunnel. Hedpfeywi E Rex Abuow

Condition: new, Precision lead screw and feed screw lathe Manufacturer: GDW Model: LZ 400 V economyline Condition: New machine with stepless speed control to the highest safety standard Centre height: 200 mm Centre distance: 1,000 mm Spindle bore: 62 mm Hedpfsxg Emysx Abuow Standard configuration includes: -- 3-axis digital readout, 7" colour display with constant V feature - LED machine light, integrated into machine enclosure - Electromechanical limit switch system for threading and feed operations - Quick-change toolpost size B with turning tool holder - Main drive brake system (spindle brake) - Sliding chuck guard with interlock monitoring - Removable chip guard rear panel - Sliding splash guard - Extendable chip tray - Simple bed stop - Central lubrication system - Set of change gears (number of teeth: 21-33-84-120) - Reducing sleeve for main spindle inner taper ME 70/MK 4 - Protective flange for spindle nose DIN 55027-6 - Additional service socket - 2 fixed centres DIN 806-MK 3 - Set of operating tools, keys and oil gun - Spare shear pins - Operating manual with spare parts list and electrical documentation

Condition: used, Year of construction: 2025, Overview This roll-fed hot glue labelling machine was manufactured by ACMI (Italy). The Opera PRO 400 RF is designed for high-capacity beverage production lines, processing both cylindrical and shaped containers in glass or PET. It applies wrap-around OPP labels at very high speeds, ensuring excellent efficiency and reliability. The machine is equipped with modern features such as automatic label splicing, brushless motor-driven infeed screws, and remote assistance capability. It is currently available for sale. Technical data  - Capacity: Nominal 48,000 bph (max. mechanical speed: 58,000 bph) - Formats: Cylindrical and shaped containers, PET or glass, e.g. 500 ml PET round bottle (wrap-around OPP label) - Machine diameter: 1,320 mm Hodpfx Aexgik Asbusw - Pitch: 125.60 mm - Label type: Roll-fed OPP hot glue wrap-around labels (30–40 µm thickness, 30–175 mm height) - Platform rotation: Motorized belt (R version) - Main motor: Servomotor - Electrical connection: 400 V (+/-10%), 50 Hz, 3PH + N + PE - Conveyor height: 1,100 mm - Conveyor chain: Plastic flat-top 82.5 mm, thickness 4 mm - Low voltage controls: 24 V DC - Environmental conditions: 5–45 °C; altitude up to 1,000 m - Control cabinet: Stainless steel with integrated air conditioner - Standard lubrication: Centralized, manual - Additional features: Automatic label splicing, double reel support, quick-release platforms, detection device for fallen bottles, remote assistance

Condition: used, mileage: 502,289 km, power: 294 kW (399.73 HP), first registration: 07/2008, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 6,600 mm, total width: 2,500 mm, total height: 3,060 mm, Year of construction: 2008, Equipment: AdBlue, = Additional options and accessories = - PTO = Notes = Despite our best efforts to ensure the data is entered correctly, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual product. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,780 cc Front axle: Steered; Suspension: Leaf spring Rear axle: Twin tires; Suspension: Air suspension Weights Unladen weight: 9,670 kg Hsdezr Rw Ujpfx Abujw Payload: 10,330 kg GVW: 20,000 kg Functional Pump: Yes Condition Technical condition: very good Optical condition: fair Further information Please contact Thierry Leemans for more information.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 600-797, overall weight: 1,000 kg, filling opening length: 93 mm, filling opening width: 385 mm, roll width: 400 mm, rotational speed (max.): 1,770 rpm, TECHNICAL DETAILS Roller width: 400 mm Rotational speed: 1,770 rpm Infeed opening width: 385 mm Infeed opening length: 93 mm Number of axles: 2 Number of fixed blades: 18 Screen perforation: 20 mm Hjdpfjzuwu Ejx Abusw MACHINE DETAILS Main motor power: 22.2 kW Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,200 x 1,000 mm Unladen weight: 1,000 kg Number of transport packages: 1

Condition: used, Year of construction: 2007, Technical details: swing diameter: 400 mm Hodpfszzvxvex Abujw turning height: 950-1500 mm Turning length: 210 mm x-travel: 310 mm z-travel: 350 mm spindle turning speed range: 20-3500 U/min weight of the machine ca.: 11 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m

Condition: good (used), Year of construction: 2007, operating hours: 6,522 h, functionality: fully functional, machine/vehicle number: WSVS4D1P274010219, mileage: 32,731 km, overall weight: 4,080 kg, fuel type: diesel, color: white, axle configuration: 4x2, driver cabin: day cab, gearing type: automatic, suspension: parabolic leaf (spring), Equipment: air conditioning, *Schmidt Compact 400 *Year of manufacture: 2007 *Sweeper/vacuum machine *32,731 km *2,726 sweeping hours *6,522 engine hours *Tipping function Hedpfozz Ap Ujx Abuow *Air conditioning *Right-hand drive

Condition: excellent (used), mileage: 627,219 km, power: 324 kW (440.52 HP), first registration: 03/2008, fuel type: diesel, axle configuration: 8x2, wheelbase: 6,970 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 9,520 mm, total width: 2,530 mm, Year of construction: 2008, Equipment: crane, Structure Construction year: 2008 Crane Number of hydraulic extensions: 5 Remote control: ✓ Rotator: ✓ Meter capacity: 18 m Capacity kilo: 7650 kg = More information = General information Number of doors: 2 Hodpfxey Hrp Ds Abujw Cab: single Registration number: BT-XP-53 Technical information Number of cylinders: 6 Engine capacity: 12.780 cc Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Lift axle; Steering Weights Empty weight: 15.580 kg Carrying capacity: 21.660 kg GVW: 37.000 kg Max. towing weight: 50.000 kg Functional Crane: HIAB 377 EP-5XS, behind the cab Make of bodywork: HIAB 377EP-5 HIPRO Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A