Used Ga 90 Vsd for sale (16,142)

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Rjdpfxoxbfuto Aaasr

Condition: excellent (used), Year of construction: 2011, MANUFACTURER: ATLAS COPCO MODEL: GA30VSDFF S/N: API431056 YEAR: 2011 POWER (kW): 30 CAPACITY (m3/min): 5.58 PRESSURE (bar): 12.80 OPERATING HOURS (DOC/TOTAL): 33,313 FREQUENCY INVERTER: yes INTEGRATED DRYER: yes Rsdpfx Aeylyz Djaaor HEAT EXCHANGER: no COOLING (AIR/WATER): air

Condition: good (used), Year of construction: 2012, MANUFACTURER: ATLASCOPCO MODEL: GA90FF S/N: API613191 YEAR: 2012 POWER (kW): 90 CAPACITY (m3/min): 16.21 PRESSURE (bar): 10 HOURS (DOC/TOTAL): 59581 FREQUENCY INVERTER: no BUILT-IN DRYER: yes HEAT EXCHANGER: no COOLING (AIR/WATER): air Rjdpfx Asyll Ddeaaor

Condition: excellent (used), Year of construction: 2015, S014890 MANUFACTURER: ATLASCOPCO MODEL: GA15VSDFF PLUS S/N: API257970 Year: 2015 Power (kW): 15 Output (m3/min): 2.51 Pressure (bar): 12.75 Operating hours (documented/total): 54,624 Frequency inverter: yes Built-in dryer: yes Rjdpfxeyli Nqo Aaaor

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: AIF074692, power: 90 kW (122.37 HP), operating pressure: 9 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA90 FF compressor is a reliable and efficient solution designed to meet demanding industrial requirements. As an oil-lubricated model, it uses oil to ensure optimal performance and enhanced durability. Although this unit is pre-owned, it retains the quality and robustness typical of the Atlas Copco brand. Rjdpfx Aoxnz Naoaajr With impressive rated power, the GA90 FF is perfectly suited for industrial applications where a consistent and reliable air supply is essential. Its integrated design facilitates easy installation and maintenance, reducing downtime and increasing productivity. Ideal for those seeking performance and reliability, the GA90 FF remains a top choice for industrial environments that require intensive compressor use.

Condition: excellent (used), Year of construction: 2011, operating hours: 68,433 h, functionality: fully functional, Atlas Copco GA37VSDFF screw compressor. 13 bar, 7.25 m³/min. Integrated dryer and inverter. Motor and compressor element overhauled at approximately 65,000 operating hours. Rsdsx Sv Smepfx Aaajr

Condition: excellent (used), Year of construction: 2016, MANUFACTURER: ATLAS COPCO MODEL: GA11VSD PLUS SERIAL NO.: API258779 YEAR: 2016 POWER (kW): 11 Redpfx Aaeylbb Esaor OUTPUT (m3/min): 1.95 PRESSURE (bar): 13 OPERATING HOURS (DOC/TOTAL): 23,199 INVERTER: yes BUILT-IN DRYER: no

Condition: used, Year of construction: 2022, Atlas Copco GA22VSDs screw compressor Redpfxsynkyvs Aaajr

Condition: excellent (used), Year of construction: 2017, MANUFACTURER: ATLASCOPCO MODEL: GA18VSD PLUS SERIAL NUMBER: API832519 YEAR: 2017 POWER (kW): 18 OUTPUT (m3/min): 3.75 PRESSURE (bar): 13 Redpfx Aaeyk Tcxoaer

Condition: good (used), Year of construction: 2017, machine/vehicle number: API262376, overall weight: 279 kg, volume flow: 150.6 m³/h, pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, We offer: ATLAS COPCO GA15VSDFF PLUS Technical data: YEAR: 2017 CAPACITY (kW): 15 OUTPUT (m3/min): 2.51 CIS (bar): 12.75 HOURS (DOC/GENERAL): 25107 INVERTER: yes BUILT-IN DEHUMIDIFIER: yes Rsdpsv Drrbsfx Aaaor

Condition: refurbished (used), Year of construction: 2012, operating hours: 890 h, load capacity: 1,000 kg, lifting height: 2,900 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,880 mm, fork length: 1,150 mm, empty load weight: 826 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically overhauled according to FEM-4.004 and current safety standards – ensuring maximum quality and your safety. From the chassis to the battery, including drive system, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs handling ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase Test and consult on-site now – we'll find the right solution for you. Industrial truck details: Manufacturer: Jungheinrich Model: High Lift Pallet Truck EJC 110 Drive type: Electric Load capacity: 1,000 kg Year of manufacture: 2012 Operating hours: 890 Lifting height: 2,900 mm Redpfx Aaex H T Nfoaor Mast type: Duplex Overall length: 1,800 mm Overall height: 1,880 mm Fork length: 1,150 mm Unladen weight: 826 kg Load centre: 600 mm Tyres: Polyurethane Model variant: EJC 110 Battery type: PzS Charger: Integrated charger

Condition: excellent (used), Year of construction: 2011, operating hours: 53,132 h, functionality: fully functional, Screw compressor GA132VSD Atlas Copco. 132 kW Rjdpfxox Rwz To Aaajr 8.5 bar 26.06 m³/min. Integrated frequency converter.

Condition: used, functionality: unexamined, Compressed Air System Atlas Copco Consisting of: Compressor GA18 Plus, year of manufacture 2007 Rjdpfxjvx Nmfj Aaaer Compressor GA11VSD+FF, year of manufacture 2017 Control unit ES 6 Incl. 1000 l air receiver GA11VSD+FF, year 2017, operating hours: approx. 20,000 GA18 PLUS, year 2007, operating hours: approx. 58,000 Buyer is responsible for professional dismantling. Forklift is provided.

Condition: new, machine/vehicle number: 2dee9cc4124b79c4820f5c3cf, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Fine-grained steel welded construction, saddle plate with replaceable 2 , kingpin, outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment, 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm, pull-out ladder at the rear, door stop at the side, 2 wheel chocks with holder, Aluminium side collision protection, galvanized steel underride guard, quarter-shell mudguards in front of and behind axle unit, with anti-spray flaps in accordance with EC, impact protection at the rear SAF disc brake axles with 430 mm disc diameter, axle/chassis laser-measured Reduction in tire wear and fuel consumption, air suspension 2-line compressed air brake system, colored cable routing for easy servicing, spring-loaded parking brake, 2 swap-proof coupling heads at the front, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS, with lift & lower valve, vehicle stability system 385/65 R22.5 tires of the manufacturer's choice, steel rims, factory silver 24 volt, multi-chamber lights, amber LED lighting at the sides, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable sockets at the front, without connecting cable, Floor: Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front bulkhead / corner stanchions: 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions: 3 pairs of sliding stanchions can be moved along the entire length, with 4 insertion pockets and long pocket at the bottom, 3 pairs of stanchion positions Insertion slats: 5 rows of wooden insertion slats Redpei Riy Tsfx Aaaor Rear wall / rear corner stanchions: Rear steel corner stanchions up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin: tarpaulin with welded horizontal and vertical straps, stainless steel tensioning fasteners Roof: Sliding roof, rear end lift can be folded up, with roof can be slid from rear to front, L-shaped roof rail for automotive industry, internal width between the roof rails, approx. 2,490 mm, tarpaulin color: white, 400 Roof non-elastic, hardly any deflection of the roof rail when loading and unloading, optimum rain strip at the rear, at the top of the end bows, above the doors Germany, test approval according to EC 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural strength according to EN 12642 XL, prepared for single-line license plate holder, warning sign according to ECE - 70, reflective strips: white, continuous on the side tarpaulins at the bottom and at the top in the corners (if visible drop sides, then the strip at the bottom, on the drop sides), reflective strips: red, all-round on the rear portal Frame DB 7350 nova grey, 10-year warranty against rusting through, support legs coated black, front corner stanchions hot-dip galvanized, front wall aluminium, rear corner

Condition: new, machine/vehicle number: 8e6cf81e11b107f23f22f209a, axle configuration: 3 axles, tire size: 435/50 r19.5, Further information Fine-grained steel welded construction, with preload slight pretension in the neck area, saddle plate with replaceable 2 , kingpin, outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment, 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm, pull-out ladder at the rear, lateral door stop, 2 wheel chocks with holder, aluminium side collision protection, galvanized steel underride guard, quarter-shell mudguards in front of 1st axle and behind each axle, with anti-spray flaps according to EC, impact protection at the rear SAF disc brake axles, laser-measured axle/chassis to reduce tire wear and fuel consumption, air suspension 2-line compressed air brake system, colored cable routing for easy servicing, spring-loaded parking brake, 2 swap-proof coupling heads at the front, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS, with lift & lower valve, vehicle stability system 435/50 R19.5 tires of the manufacturer's choice, steel rims, factory silver 24 volt, multi-chamber lights, amber LED lighting at the sides, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable sockets at the front, without connecting cable Floor: Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front bulkhead / corner stanchions: 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions: 3 pairs of sliding stanchions can be moved along the entire length, with 4 insertion pockets and a long pocket at the bottom, 3 pairs of stanchion positions Insertion slats: 5 rows of wooden insertion slats Rear wall / rear corner stanchions: Rear steel corner stanchions up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin: Tarpaulin with welded-in horizontal and vertical straps, stainless steel tensioning fasteners Roof: Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for car industry, internal width between the roof rails, approx. 2 490 mm, tarpaulin color: white, 400 Roof non-elastic, hardly any deflection of the roof rail when loading and unloading, optimum rain strip at the rear, at the top of the end bows, above the doors, EcoLift - lifting roof can be raised by approx. 380 mm, with gas pressure damper support, 3 driving positions at the front: interior height at the front approx. 2900 mm/ 2950 mm / 3000 mm, adjusted to approx. 3000 mm Rjdpfxji Ri E Hj Aaajr Germany, test approval according to EC 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural strength according to EN 12642 XL, prepared for single-line license plate holder, warning sign according to ECE - 70, reflective strips: white, continuous on the side tarpaulin at the bottom and at the top in the corners (if visible drop sides, then the strip at the bottom, on

Condition: new, machine/vehicle number: 068983c41e44eb5660fa9100c, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 435/50 r19,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, with preload slight pre-tensioning in the neck area, saddle plate with replaceable 2 kingpins X-tra Long, with 15030 mm internal length Outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm Extension ladder at the rear Door retainer at the side 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Quarter-shell mudguards in front of 1st axle and behind each axle Impact protection at the rear Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system AAC Basic, automatic relief axle acting on last axle, as maneuvering aid, up to 20 km/h, can be switched off manually Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 435/50 R19.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side Redpfei Riwuex Aaaer Side amber LED lighting coupled with the blinker Flashing side lights Side lights 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Floor Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front wall / front corner stanchions 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions 3 pairs of sliding stanchions can be moved along the entire length, with 4-fold pockets and with long pocket at the bottom. 3 pairs of stanchion positions Insertion slats 5 rows of wooden slats Rear wall / rear corner stanchions Rear corner stanchions steel up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Stainless steel tension locks Roof Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof rail when loading and unloading EcoLift - lifting roof can be raised by approx. 380 mm, on both sides, with gas pressure damper support, 3 driving positions at the front: Front interior height approx. 2900 mm / 2950 mm / 3000 mm, adjusted to approx. 3000 mm Optimum rain strip at the rear, at the top of the end bows,

Year of construction: 2012, condition: excellent (used), 1 used feed water tank Rodpemfq Rksfx Aaasr ----- cylindrical, horizontal on saddle feet, insulated with degaser capacity approx. : 5.900 ltr max. allow. work. pressure : 0 / + 6 bar max. allow. work. temp. : 0 / + 200°C year of construction : 2012

Condition: excellent (used), Year of construction: 2006, MANUFACTURER: ATLAS COPCO MODEL: GA30VSDFF Redpfoyifb Iex Aaasr SERIAL NO.: API422341 YEAR: 2006 POWER (kW): 30 CAPACITY (m³/min): 4.58 PRESSURE (bar): 12.80

Condition: excellent (used), Year of construction: 2016, MANUFACTURER: ATLAS COPCO Rodpsyh Ugkefx Aaajr MODEL: GA30VSDFF PLUS S/N: API830397 Year: 2016 Power (kW): 30 Output (m3/min): 5.84 Pressure (bar): 12.75 Operating hours (documented/total): Frequency inverter: yes Built-in dryer: yes, R410a 1.1kg

Condition: excellent (used), Year of construction: 2013, operating hours: 20,900 h, functionality: fully functional, overall weight: 4,500 kg, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressor room Atlas Copco GA75VSD, built in 2013, 46,100 hours - 75 kW - Max. 10 bar Rjdev Snn Ispfx Aaaor Dimensions: L225 x W110 x H195 cm Atlas Copco GA45+, built in 2007, 21,000 hours - 45 kW - Max. 10 bar Dimensions: L205 x W100 x H180 cm Atlas Copco FD245, built in 2013, refrigeration dryer Dimensions: W120 x D110 x H100 cm Dimensions: 2000L tank, built in 2016, height 2.85 m Incl. oil-water separator System is currently still in operation; operating hours may vary. System is fully functional and regularly maintained. Maintenance kits and oils are included. Very good condition, see pictures. A forklift is available for loading. Pickup by appointment only in 75053 Gondelsheim. Shipping via freight forwarder is possible; please include your postal code in your inquiry.

Condition: excellent (used), Year of construction: 2018, MANUFACTURER: ATLASCOPCO TYPE: GA11VSDFF PLUS S/N: API265155 YEAR: 2018 POWER (kW): 11 OUTPUT (m³/min): 1.95 Rsdpfxjyh Rxpe Aaajr PRESSURE (bar): 12.75 OPERATING HOURS (DOC/TOTAL): FREQUENCY CONVERTER: yes BUILT-IN DRYER: yes, R134a 0.39kg

Condition: new, Year of construction: 2023, Atlas Copco GA7 VSDs P - 13 Rjdpswk Ewijfx Aaasr Screw Compressor Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped, and variable speed. Discharge pressure: 13.00 bar Motor power: 7.50 kW Free air delivery: 0.38 - 1.36 m³/min

Condition: excellent (used), Year of construction: 2012, operating hours: 21,000 h, Screw compressor compressed air tank dryer oil remover location Mülheim an der Ruhr Rjdpfswr Nnbjx Aaaor

Condition: used, Year of construction: 2006, operating hours: 10,070 h, Equipment: all wheel drive, * Large and small shovel + fork included Rsdewnk Egopfx Aaasr

Condition: excellent (used), Year of construction: 2018, operating hours: 17,555 h, functionality: fully functional, Atlas Copco GA110VSD screw compressor. 110 kW with 8.5 bar and 21.60 m³/min. Integrated frequency converter. Rsdpfsx Iu H Ujx Aaajr