Used Gallmac Wmw 115 for sale (459)

Condition: excellent (used), Year of construction: 1992, turning diameter over cross slide: 1,600 mm, spindle bore: 100 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 3,700 mm, quill stroke: 210 mm, total length: 8,500 mm, total width: 3,400 mm, total height: 2,060 mm, spindle speed (max.): 450 rpm, spindle speed (min.): 4 rpm, bed width: 1,590 mm, 4 chuck 1600 mm Heidenhain digital read out Steady rest 710 mm Powered tailstock Threath cutting  Triple guide ways cast irion bed design For turbine rotors, electric motor anchors, reactor vessels, cylinders, rope pullys, marine propulsion shaft, castings, shafts and cement industry DBC Turning Length: 3700mm Swing over bed Ø: 2000mm Swing over cross slide Ø:1600mm Spindle bore: 100mm Spindle power: 55kW Bed width: 1590mm Tailstock spindle Ø: 220Ø Stroke quill: 210mm Power: 55kW Speeds / ranges: 3,55 - 450Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 5000mm/min. Workpiece load: 12500 Isdpju Avh Iofx Ag Nobc Length: 8500mm Width: 3400mm Height: 2060mm Weight: 27400kg

Year of construction: 1990, condition: like new (used), Quality WMW 250ton C frame hydraulic press for sale Ijdpfx Aeig Hzkjg Njbc The machine bed size is approximately 630mm x 850mm with an Opening/Daylight dimension of 300mm. The machine is fitted with a 150mm Packer plate which could be removed to allow for 450mm opening.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, total height: 27,500 mm, total width: 10,500 mm, total length: 16,500 mm, pressing force: 25 t, table width: 630 mm, table length: 500 mm, operating speed: 100 mm/s, overall weight: 2,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 360 mm, die cushion stroke: 160 mm, clearance between the columns: 800 mm, stroke length: 500 mm, power: 8.75 kW (11.90 HP), Hydraulic press PYE 25 S1M. Year of manufacture: 1990. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Operating pressure: 16 MPa. Upper table: 450 x 360 mm. Lower table: 630 x 500 mm. Clear opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Machine is in very good technical condition. Fully overhauled. Inspection and test run under power possible on site. Iedpfx Astzwxdsg Nebc

Condition: reconditioned (used), Year of construction: 1984, Machine is modernized in 2015. Drilling capacity max. 20 mm Tool taper 2 MK speed 355/710/1400/2800 rpm spindle stroke 100 mm spindle throat 210 mm headstock adjustment 250 mm max. distance spindle-table 445 mm table surface 340X280 mm connected load 1,1 kW weight 0,165 t space requirement LxWxH 0,6 x 0,5 x 1,3 m Ijdpfxogqukfo Ag Nobc

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, VEB Fritz Heckert ZFWVG 250×2000 Maximum workpiece length: 2,000 mm Maximum workpiece diameter: 250 mm Ibsdpfx Ajw Dvanjg Nec Accessories: 2nd milling head, hob cutters in various modules, steadies, clamping devices, etc.

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Isdpemi Rpiofx Ag Nobc 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Year of construction: 1994, condition: ready for operation (used), A total of four WMW/Werkö saw grinding machines are available. Saw blade diameter min./max.: 250mm/1450mm, grinding wheel diameter: 250mm, speed: 2500rpm, tooth pitch: 42mm, grinding spindle swivel range: +/-45°, machine dimensions X/Y/Z: approx. 850mm/1000mm/1800mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible. Ibsdpfx Asv Exthsg Nsc

Condition: used, functionality: fully functional, Hydraulic Press VEB Zeulenroda PYE10N Used condition as shown in the pictures Ibedpfx Agew S Ucce Nsc All data can be found in the photo of the nameplate.

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D08L/8081, Offer Number: D08L/8081 Machinetype: straightening and cutting machine Make: WMW Type: UDARA10 Constr. year: 1980 diameter range: 3-10 mm cutting length: 2000 mm Ibedpfxswi Svco Ag Njc speed - meters/min: 22-71 Location: In our warehouse

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, 1 internal and surface grinding machine Isdpjw Dtfbjfx Ag Nobc Manufacturer: WEMA Glauchau Model: SI 6/2 ALS PC x 710 Year of manufacture: 1985 Grinding depth: 710 mm Table travel: 1120 mm Grinding diameter: 40–400 mm Weight: 9.1 t

Condition: used, Horizontal Gear Hobbing Machine WMW MODUL ZFWZ 1250/3 Year of manufacture: 1982 Control: conventional Country of origin: Germany Max. gear diameter: 1250 mm Gear width: 600 mm Module – max.: 16 Module – min.: 2 Cutter diameter: 240 x 280 mm Table clamping surface: 1020 mm Ibodewxxxcspfx Ag Njc Speed range: 28 – 200 rpm Axial feeds: 0.28 – 8 mm/min Radial feeds: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Swivel range of milling slide - L/R: +/- 45° Rapid traverse motor: 12.5 kW Voltage: 380 V Frequency: 50 Hz Total power requirement: 5/19.5 kW

Condition: used, table diameter 315 mm Iodpet Dqu Djfx Ag Njbc workpiece weight 50 kg centre height mm weight of the machine ca. 60 Kg dimensions of the machine ca. 0,4 x 0,4 x 0,2 m vertical rotary table, Height from assembly space to centre of disk = 500 mm

Condition: ready for operation (used), Drilling capacity in steel: 50mm, spindle mount: MK5, speed: 1000rpm, throat depth: 355mm, drilling stroke: 280mm, spindle-table distance: 710mm, spindle-column distance: 355mm, table dimensions X/Y: 630mm/500mm, column diameter: 160mm. Machine dimensions X/Y/Z: 1200mm/800mm/2700mm, weight: approx. 1650kg. On-site inspection is possible. Ibodpfxowaa E Te Ag Nsc

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Isdpfxjwp Nv Hj Ag Njbc Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: used, turning diameter over slide rest 800 mm Control Siemens 802D swing diameter 2000 mm centre height 1000 mm Ijdpev H Etdsfx Ag Nsbc

Condition: excellent (used), Single-column eccentric press Inv. No. 3647 Ibjdpowxwt Eefx Ag Njc Manufacturer: Ambold - WMW Model: PEEV 40.1 Press force: 40 tons * Stroke adjustment: 8 to 88 mm * Adjustable ram: 55 mm * Ram strokes: 160 strokes/min * Installation height: 390 mm * Throat depth: 230 mm * Table area: 590 x 455 mm * Adjustable table!!! * Overload protection - shear plate * Foot / two-hand control * Separate clamping plate * Machine weight approx. 2700 kg.

Year of construction: 1983, condition: ready for operation (used), Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible. Ibjdsu Av E Hspfx Ag Nsc

Condition: good (used), total length: 2,035 mm, total width: 1,565 mm, plate height: 255 mm, Manufacturer: ZERBST Type: DP1 / S2 & DP2 / S3 & DP3 / S3 Year of manufacture: 1988 Specifications Metric US Standard Length 2035 mm Width 1565 mm Height 255 mm Ibsdewp H Awopfx Ag Njc Weight per plate approx. 1200 kg Number of matching pieces 4 Dimensions (estimated) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you verify all critical details.

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 600 mm Ibjdeuddgfepfx Ag Nec z-travel 805 mm Control Sinumerik 840D weight of the machine ca. 13 t 1 horizontal machining centre Make: HECKERT type: CWK 500D year 2003 serial no. 16087 control, make: Siemens, type: Sinumerik 840D travel X/Y/Z 800 x 600 x 805 mm 2-fold pallet changer pallet size 500 x 500 mm NC-rotary table 360 x 0,001° 60-fold tool changer, tool holder HSK 63 Speed max. 15,000 rpm IKZ 50 bar Operating hours 32,450 Spindle hours 6.080 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Infrared probe preparation

Condition: ready for operation (used), Pressing force: 63t, operating pressure: 160bar, pressing speed downwards/upwards: 200mm/400mm/s, ram stroke: 500mm, throat depth: 360mm, max. ram table distance: 800mm, weight: approx. 4200kg. On-site inspection is possible. Ijdpfjwaa E Hjx Ag Nsbc

Condition: good (used), total length: 3,620 mm, total width: 2,025 mm, plate height: 350 mm, Manufacturer: UNION Type: Cast iron Year of construction: 2000 Specifications Metric US Standard Length 3620 mm Width 2125 mm Height 350 mm Number of T-slots 7 T-slot spacing / pitch 300 mm T-slot size Ibodpfx Ajwp Hn Tjg Nec 34 mm Weight per plate approx. 5200 kg Number of matching pieces 5 Dimensions (Estimate) Length 3619 mm Width 2025 mm Height 350 mm Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute a representation or contractual terms. We recommend you verify all important details.

Year of construction: 1965, condition: ready for operation (used), A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993. Ibjdevy E A Sspfx Ag Nsc

Year of construction: 1976, condition: ready for operation (used), Travel X/Y/Z: 820mm/300mm/485mm, table dimensions X/Y: 250mm/1000mm, spindle mount: SK40, speed: 2800rpm, spindle head swivel: +/-45°, quill stroke: 100mm, feed: 630mm/min, connected load: 9.5kW, machine weight: approx. 1600kg. Documentation available. On-site inspection is possible. Iodpovur Hmjfx Ag Nebc

Condition: ready for operation (used), Travel X/Y/Z: 850mm/280mm/355mm, table dimensions X/Y: 1250mm/315mm, feed X/Y: 800mm/min, feed Z: 250mm/min, spindle mount: ISO 50, spindle speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, weight: approx. 3300kg. On-site inspection is possible. Ibsdpfxsvu Dfne Ag Nec

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Ibedshz Ua Sopfx Ag Nec