Milling machine

WMW Ruhla FUW 315

Condition: new, Year of construction: 2025, Yanigav Earth Auger TAM 245 • Simple three-point hitch • Very robust, welded chassis • Versatile, high-performance gearbox from 30 to 90 HP • Usable auger diameters from 10 cm to 80 cm and up to 1.80 m in height • Offset of 1.30 m on each side of the axis Fgedpfxer Eznie Aggog • Chassis length: 245 cm • Auger tilt adjustment (front/back and right/left) • Auger not included

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min Fedpfju Nc Risx Aggogg feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: used, Year of construction: 1982, From business liquidation: Fsdsxq N T Eopfx Aggjgg Ulmia 1710S Year of manufacture: 1982 Mitre cuts up to 45° Maximum cutting height at 90°: 75mm – at 45°: 50mm Saw blade: 250mm Table size: 630x500mm 380 Volt Cutting width to the right of the saw blade: 650mm The machine is operational, but shows heavy signs of use!

Condition: used, Year of construction: 1951, Technical details: turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm centre height: im Bett gemessen: 190 mm spindle passage: 40 mm range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW tailstock quill taper MT: MK 4 tailstock quill: 180 mm weight of the machine ca.: 1,6 t Fjdpou Ix Hdsfx Aggsgg dimension machine xH: 2,6 x 1,4 x 1,3 m The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Tool support quadruple steel holder tool support approx. 30° right/left swiveling 4 Stück Wechselräder Copying device (taper 15° right/left) *

Condition: excellent (used), Year of construction: 1979, turning diameter over bed 480 mm turning diameter over slide rest 295 mm turning length 1000 mm spindle bore 56 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1,4 x 0,8 x 1,6 m Fodpjyiu T Aefx Aggegg

Condition: ready for operation (used), machine/vehicle number: 1124, table mounting size: 300 x 1300 mm table movement x: 950 mm table movement y: 220 mm table movement z: 400 mm Fgsdpfod H Ilrsx Aggog spindle taper horizontal: MK 4 spindle turning speed range: 25 - 1250 rpm carriages longitudinal and cross: 7,5 - 635 mm/min carriages vertical: 3 - 250 mm/min electrical connection: 380 V, 4 kW space needed: 1670 x 1500 x 1580 mm weight: 2600 kg

Condition: good (used), Kern lathe D 23 V with Forkard lathe chuck Multifix B digital display Fedpfx Agovl Ig Dogegg

Condition: excellent (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel paths: X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Speed range: 50 - 4000 rpm Feed rate (infinitely variable): 5 - 2000 mm/min Rapid traverse in all axes: 8 m/min Vertical milling head, swiveling: ± 90° Manual quill stroke adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3000 x 2400 x 1975 mm Fgedpoxtu H Nsfx Aggsg Weight: approx. 3000 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TNC 410 • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives • Data interface V 24 / RS 232 • Swiveling vertical milling head ± 90° right & left with 100 mm quill adjustment • Hydraulic tool clamping, vertical & horizontal, ISO 40 • Swivel-away device for the vertical milling head • Very wide speed range up to 4,000 rpm • Vibration-free operation thanks to rigid and heavily ribbed cast iron guideways • Ball screws for X, Y, and Z axes • All electrical control elements on one side, in a movable control panel • Fixed angle table with foldable chip guard • Coolant system integrated in the machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Image: shows brochure photo Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Fgjdpfsv Amryex Aggeg Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition

Condition: reconditioned (used), Year of construction: 1970, functionality: fully functional, Table size 800 x 200 mm Magnet table 600 x 200 mm Grinding capacity 630 x 200 mm Fedjw R Dnxepfx Aggjgg Max grinding high 320 mm Dia of grinding wheel max:250 mm Spindle speed 2750 rpm Power required 3,6 kW Weight 2200 kgs Dimensions L x W x H =: 1900 x 1500 x 2000 mm Dimensions of coolant tank L x W x H = 400 x 300 x 500 mm