Used Garbage Press for sale (12,542)

Condition: good (used), Baling press, Schleicher, 16 S – used - : Djdpfx Aoyzcwhsl Nsch Ex-works price: only €1,950 (net) Manufacturer: Schleicher Model: 16 S Serial number: 6150I1730E Year of manufacture: 20 Height: 2000mm / Width: 1500mm / Depth: 900mm Weight: 1,850kg 380V, 3-phase, 10.3 AMP, 4kW Condition: good Available: immediately Location: Husum Operating manual not available.

Condition: good (used), Year of construction: 2008, pressing force: 30 t, Baler presses, Bramidan, 4-x 30 SLD, 30 tons pressing force – used - : Price ex location: only €3,950 (net) Manufacturer: Bramidan Model: 4-x 30 SLD Number: PEY297206-3 Year of manufacture: 2008 Dsdpfxsyzcvwj Al Njch H: 2300mm / W: 1800mm / D: 1500mm Weight: 1,850kg 3x230/400V, 25/16 Amp, 4kW Condition: good (the photo with the warning tape is simply to indicate that the press is not being used anymore as a new, larger one has been purchased) Available: immediately Location: Husum Operating manual available

Condition: used, Year of construction: 1973, pressure 28 t distance between columns 510 mm dayligth 380 mm stroke 260 mm Dcsdpov Svc Tofx Al Nsh weight of the machine ca. ca. 750 kg

Condition: used, Year of construction: 1950, machine/vehicle number: 26284, functionality: unexamined, power: 1.6 kW (2.18 HP), pressing force: 30 t, overall weight: 1,100 kg, We offer this used Raskin 30TRG crank press, year of construction 1950. Machine has not been used for 30+ years and was sitting in a corner of the workshop under a tarp. Now it must go. Untested and condition unknown, but was working when put aside, and externally looks in working order. Included is the punching tooling visible on the pictures (on the pallet + cardboard box). Dcedpfx Asza En Sol Neh

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feeding opening dimensions: 119.5 cm × 65 cm Condition: very good! Dsdpfx Aley Uimvs Noch Video of the machine in operation available upon request.

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2008 Press force: 532 kN Dcjdpfx Aoy Uil Esl Njh Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm Please contact us for a video or more information.

Condition: used, total length: 2,500 mm, total width: 2,400 mm, total height: 2,400 mm, Weight: 4.000 kg - Documentation available: No - CE certificate present: No - Drive system: CNC - Press force [ton]: 40 - Max. working width [mm]: 2050 - Column gap [mm]: 2050 - Options: Finger safety guard - Transport dimensions: 2500mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dcjdpfjxwmwbox Al Noh Lukas van Rossum

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 130 mm, pressing force: 12 t, bending force (max.): 12 t, Stierli bender 120HE horizontal press Horizontal bending machine, manual control with angle fine adjustment. Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 12 tons Dcedpsflc R Defx Al Njh tool height 130 mm Stroke 0-170 mm stepless Bending capacity 130x12 mm S235 Straightening performance light straightening work Pipe bending 3/8"-11/2" Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, tool height: 200 mm, operating speed: 10 mm/s, working height: 200 mm, bending angle (max.): 180 °, sheet thickness steel (max.): 20 mm, sheet thickness copper (max.): 20 mm, lifting speed: 10 mm/s, bending force (max.): 42 t, Stierli bender 420HE Horizontal bending machine, with manual control and angle fine adjustment system Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 42 tons Tool height 200 mm Stroke 0-300 mm stepless Bending capacity 200x24 mm S235 Straightening power for HEA180 Djdpsflc Spefx Al Njch Bending and straightening program via selector switch Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 300 mm, stroke length: 350 mm, bending angle (max.): 180 °, pressing force: 82 t, sheet thickness steel (max.): 30 mm, sheet thickness copper (max.): 30 mm, lifting speed: 10 mm/s, bending force (max.): 82 t, Stierli bender 820HE Horizontal bending and straightening machine, with manual control and stroke fine adjustment system STRAIGHTENING with this horizontal press: Fast and precise straightening for welding parts, profiles, beams, sheets, pipes, flat steel, etc.... BENDING with this horizontalpress: Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 82 tons Tool height 300 mm Stroke 0-300 mm stepless Bending capacity 300x20mm (up to 300x30 with large V-block) S235 Straightening power for HEA260 Bending and straightening program via selector switch Dcsdpegqfmnofx Al Neh Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 4080 mm Distance between uprights: 3680 mm Press force: 170 tons CNC control: DELEM DA65 Number of controlled axes: 4 Controlled axes: Y1 / Y2; X; R Number of backstops: 4 Stroke: 365 mm Overhang: 410 mm Installation height: 535 mm Working height: 1050 mm Hydraulic tool clamping, top and bottom: WILA Pneumatic die shifting Dodpjzbugmefx Al Nsch CNC-controlled crowning DSP laser monitoring (new) CE marking Motor power: 37 kW Dimensions (length x width x height): approx. 5650 x 2350 x 3100 mm Weight: approx. 18.5 tons Condition: Overall in good condition, retrofitted in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2001, Technical specifications: Working length: 2050 mm Distance between uprights: 1750 mm Press force: 85 tons Control system: DELEM DA65A Adjustable back gauge Axes: Y1/Y2; X; R; Z1/Z2 Stroke: 365 mm Overhang: 410 mm Installation height: 535 mm Power: 11 kW Hydraulic tool clamping, top and bottom: WILA system CNC-controlled crowning I-axis: pneumatic die shifting ACB angle control system CE marking Dimensions (length x width x height): approx. 2200 x 2750 x 2900 mm Weight: approx. 9.5 tons Dcjdpfxszbuc Io Al Njh Condition: Very good condition, retrofitted in 2026 The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear and tear are commensurate with its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, operating hours: 978 h, power: 13 kW (17.68 HP), pressing force: 165 t, table width: 3,000 mm, Complete retrofitting was carried out in 2023. Includes various tools. Dcodpfx Alozacp Ho Neh

Condition: excellent (used), Year of construction: 2008, Technical specifications: Working length: 2550 mm Frame width: 2050 mm Pressing force: 80 tons CNC control: OPERATOR II Graphic 14” TFT color monitor Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Stroke: 350 mm Overhang: 420 mm Working height: 960 mm Motor power: 9 kW CE marking Dimensions (length x width x height): approx. 3400 x 2050 x 2550 mm Weight: approx. 6 tons Accessories: 1 set of tools: Dsdpjy D T Rwefx Al Nech 1 upper tool punch: 120 mm 1 segmented die: V50, V35, V22, V16 Condition: Very good condition, little used, only approx. 5,350 operating hours The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 80 t, stroke length: 350 mm, table width: 1,400 mm, table length: 840 mm, oil tank capacity: 230 l, total width: 1,600 mm, total height: 3,600 mm, overall weight: 8,000 kg, Equipment: CE marking, safety light barrier, NEW EXNER hydraulic testing press, type PG 80 Number of press cylinders: 2 Nominal force (adjustable): 2 x 400 kN Dsdpfx Asza Em Usl Nsch Retraction force: 2 x 150 kN Ram stroke: 350 mm Ram width: 1400 mm Ram depth: 840 mm Guide length: 750 mm Ram speed, load up to 100%: approx. 0-10 mm/s Ram speed, retraction: approx. 0-20 mm/s T-slots, table/ram according to DIN 650 = 22 mm Installation height – stroke at top: 600 mm Table width: 1400 mm Table depth: 840 mm Column clearance, front: 1000 mm Column clearance, side: 600 mm Table height above floor: 1100 mm Nitrodyne control / retraction, spring force to be compensated under spring tools: max. 150 kN Accuracy: Maximum deviation of plan parallelism from the ram surface to the table surface (from right to left) in free travel (absolute) < 0.05 mm in eccentric loading with maximum force (absolute) < 0.10 mm Table/ram deflection at nominal force and 2/3 surface coverage: 0.10 mm Starting accuracy U.T. without mechanical depth stop: ± 0.05 mm Optionally, a servo roll feed can be offered and installed.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned Djdpey R Nnfofx Al Noch • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, Year of construction: 1979, pressure 100 t Dcjdpfxsy Tpr Aj Al Nsh stroke 500 mm table surface area 4000x500 mm weight of the machine ca. 5,7 t HY – S 100 RH MAE hydraulic straightening press, complete with straightening unit Year of manufacture: 1979 Approved in accordance with UVV Stroke: 500 mm Pressure capacity: 100 tonnes Table: 4000 x 500 mm Weight: 5700 kg

Condition: like new (used), machine/vehicle number: 5703202, Max. pressing force: 25 kN Outreach: 105 mm Max. working stroke: 60 mm Table size: 150 x 200 mm Through-hole in the table: 25 mm Stroke adjustment: 180 mm Min./max. installation height: 30/210 mm Dcodpfx Aey Uv Hcsl Neh Space requirement without/with lever: 300 x 400 x 640/1100 mm Weight: 74 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, For sale is a used Siat L36-150 TC-CE adhesive tape printing machine, manufactured in 2014. The machine is in good condition and fully functional. This machine was operated in our facility together with a dust extraction system, which is also to be sold: Manufacturer / Model: Siat L36 150 TC CE Dcjdpfxeza Synj Al Neh Year of manufacture: 2014 Condition: used, good Function: functional Application: printing adhesive tape CE marking: present Dust extraction system: FILTERBLOC CARBO-2000 ATEX (new, from 2023) We prefer to sell the machine as a complete package including the dust extraction system. The machine can be inspected by arrangement. Further technical data and photos are available upon request.

Condition: used, workpiece height max. 2.320 x 1.010 mm output 33 kW Available 2 Stück Orma PM/AFT membrane press for coating single-sided profiled workpieces with automatic loading and unloading system Dsdpow Na Ulefx Al Noch

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 35,295 h, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Operating hours [h] 35295 Hydraulic operation [h] 24098 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling Dcodpfxsza Eiis Al Neh - Modern machine design Back gauge system - Rear back gauge system with 2 axes and rack and pinion drive for the X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping" manual, hardened, self-centering; for vertical tool change - Lower tool clamping with hydraulic clamping, hardened Lower tool displacement - Lower tool displacement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000 graphical workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15" touch screen - Network enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system 5 axes (X, X1, R, Z1, Z2) + Upper tool clamping hydraulic + Crown control CNC + BendGuard + Additional foot switch + 2 pcs. support console + 1 pcs. MobileControl + ACB prepared

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Weight: approx. 120 kg Dcodey Tbvmjpfx Al Neh For further dimensions see pictures.

Condition: good (used), Year of construction: 2019, functionality: fully functional, operating hours: 12,113 h, pressing force: 36 t, Bending length [mm] 1020.00 Press force [tons] 36 Control system TRUMPF TASC 6000 Standard equipment Machine - Sturdy machine frame - Press beam - Highly dynamic, electromechanical direct drive (torque motor) Dsdsza Dfiopfx Al Nsch - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Back gauge system - Rear back gauge system, 3 axes X1, R1, Z1 Tool clamping - Upper tool holder, self-centering, manual clamping - Lower tool holder, manual clamping, hardened Control system - TRUMPF TASC 6000 integrated - Numerical workshop programming - Windows Xpe (embedded), Pentium M with 1.1 GHz clock frequency - 1 GB RAM - 15-inch touch screen - Network compatible - Teleservice via modem Safety - Side-swinging safety doors - Protective cover at the rear - 2-button foot switch, for standing and seated operation - Rear back gauge system, 6 axes - Ergonomics package, including: * Comfort support table (front) * Comfort footrest * Work area lighting at the front (LED) - Productivity package, including: * Graphical workshop programming * Automatic Trumpf tool clamping * BendGuard safety device (with block laser) - Tool cabinet on the right

Condition: good (used), Year of construction: 2011, functionality: fully functional, pressing force: 36 t, Bending length [mm] 1020.00 Pressing force [tons] 36 Control system TRUMPF TASC 6000 Standard equipment Machine - Robust machine frame - Press beam - Highly dynamic, electromechanical direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Back gauge system - Rear back gauge system, 3 axes X1, R1, Z1 axis Tool clamping - Upper tool holder, self-centering, manual clamping - Lower tool holder, manual clamping, hardened Control system - TRUMPF TASC 6000 integrated - Numerical workshop programming - Windows XPe (embedded), Pentium M with 1.1 GHz clock speed - 1 GB RAM - 15-inch touch screen Dcedpfx Aleza Dczs Noh Safety - Side-swinging protective doors - Rear protective cover - 2-button foot switch, for standing and seated operation - Rear back gauge system, 6 axes Ergonomics package: - Comfort support table (front) - Comfort footrest - Work area lighting in front (LED) - 2 document holders Productivity Plus package: - Graphical workshop programming - Automatic tool clamping - BendGuard (with block laser)

Condition: used, Punching force: 200 kN Thread, for example a 13 mm hole in 12 mm steel Dodpfx Aljrmudgo Njch Viewfinder via handwheel Assortment of tools is included in the price