Used Gea for sale (193)

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 12CG001009, Used GEA continuous mixing and granulation system, model ConsiGma1, stainless steel product contact surfaces, with Brabender feeder, twin screw continuous mixer, and fluid bed dryer granulator, with controls, CE and Ex rated, 400 volt, 50 Hz, seiral# 12CG001009, built 2012. Pgedstvm Ulepfx Adljk

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Pedpfevhctwox Adlsgk Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: like new (used), Year of construction: 2012, The refrigeration unit is in new condition with storage marks. Pedpfxsmmdq Tj Adlegk Weight: 400 kg Height: 205 cm Width: 130 cm Depth: 65 cm

Condition: good (used), Used pressure vessel with agitator Last application: Pharmaceuticals / Chemicals Item number: 10882 Volume: 345 litres Type: Vertical on 4 legs Material (product-contact): 1.4571 / AISI316 Design: Single-walled Operating pressure (as per nameplate): -1/ +0.8 bar Operating temperature: 100°C Tank dimensions: Outer diameter: 744 mm Inner diameter: 740 mm Total height: 1,590 mm Total width: 800 mm Total length: 1,200 mm Cylindrical height: 600 mm Materials: Internal: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Fittings/Features: Nameplate: Yes Agitator: Yes Outlet diameter: 40 mm Discharge height from floor: 335 mm Outlet valve: Disc valve Control cabinet Pedpow A Inuefx Adlegk

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, power: 301 kW (409.25 HP), We offer a complete package of process vessels and key equipment forming part of an industrial ammonia refrigeration machine room, including one twin-screw compressor unit for -40°C operation, together with the main NH₃ vessels and auxiliary equipment, all manufactured in 2007. The set is suitable for industrial refrigeration applications including compression, oil cooling, intercooling, oil separation, liquid separation, condensation, liquid distribution, and oil collection. Main equipment included: Twin-screw compressor unit GEA Grasso Duo-Pack PB-3A for -40°C operation — complete compressor package with two screw compressors mounted on a common frame. Technical data from the attachment include: refrigerant NH₃, refrigeration capacity 301 kW (with economizer), shaft power 2 × 104 kW, motor power 2 × 132 kW, speed 2940 rpm, evaporating temperature -40°C, condensing temperature +35°C, economizer temperature -22°C, dimensions 3830 × 2370 × 2300 mm, weight 6380 kg, suction connection 2 × DN 125, discharge connection DN 100, and oil charge 160 kg. Oil cooling system: ammonia thermosyphon. Control system: GSC Oil cooler for screw compressor unit, serial no. 170049, design pressure 23/23 bar, volume 96 / 70 dm³, temperature range 0/+60°C and 0/+100°C, working media ammonia / oil + NH₃. Economizer / intercooler vessel, serial no. 19103, allowable pressure 12 bar, volume 1000 dm³, temperature range -40/+100°C, working medium NH₃. Oil separator, serial no. 5281, design pressure 23 bar, volume 0.620 m³, temperature range +5/+110°C, working medium NH₃ + oil. Horizontal liquid separator, serial no. 19102, allowable pressure 12 bar, volume 3400 dm³, temperature range -40/+50°C, working medium NH₃. Evaporative condenser coil, serial no. H070979, design pressure -1/23 bar, volume 638 dm³, temperature range -20/+120°C, working medium NH₃, capacity 745 kW. Thermosyphon / liquid receiver, serial no. 19100, allowable pressure 18 bar, volume 620 dm³, temperature range +1/+100°C, working medium NH₃. Pgjdpfx Ajyrrpyodlok Oil drain tank, serial no. 19104, allowable pressure 18 bar, volume 70 dm³, temperature range -40/+150°C, working medium oil + NH₃. The equipment is suitable for reuse in industrial refrigeration systems, retrofit projects, or as a source of high-value NH₃ machine room components, subject to technical verification and local compliance requirements. Important note: The installation is not dismantled, the potential buyer must include the costs of dismantling.

Condition: like new (used), Year of construction: 2013, This floor-standing machine is designed for mixing a large number of dry products. Thanks to the planetary motion of the mixing tool, intensive and homogeneous mixing is achieved. The system consists of a stainless steel vessel—material 316L, mirror-polished, Ra < 0.8 µm—and a stainless steel housing, in which the vessel lid with the integrated mixing units and drives is installed. The mixing vessel has a capacity of approximately 90 liters (usable volume approx. 30 to 60 liters) and is placed and clamped onto two arms. The mixing material is filled in, after which the vessel is raised hydraulically, causing the mixing tool to immerse into the product. The mixer is equipped with a 45° spiral-shaped stainless steel mixing tool; the speed can be regulated via a gearbox. The mixing speed is adjustable—48, 82, 135, and 231 rpm. Vessel discharge is performed via a centrally located bottom outlet. Operation and control, including recipe and batch management, is performed via an operator panel on a separate stainless steel control cabinet. The operating language is English. The system is prepared for use in ATEX-rated (explosion-protected) areas. Psdpfx Asx Antuodlegk Electrical configuration: 230/400V, 3-phase, 50 Hz, IP55 Space requirement: 90 x 130 x 235 cm Weight: approx. 850 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, inner diameter: 260 mm, wall thickness: 10 mm, overall weight: 870 kg, year of last overhaul: 2025, operating temperature: 100 °C, Decanter centrifuge, 5500 RPM, 1.5 m³/h, 11 kW, refurbished, bearings replaced, liquid discharge under pressure, in excellent working condition, documentation available. Pgsdoxlpwtepfx Adlok WESTFALIA Decanter CA 22.00.00 (green one), in excellent condition, excellent working order. Live video call demonstration or personal inspection possible.

Condition: used, Year of construction: 1980, used, good conditionmake GEA-Casadeitype DE 410year 1980machineNr. 80-12-72planing width approx. 410 mmtable length infeed approx. 1200 mmtable length outfeed approx. 1000 mmjointing bartable lips slotted/low noisenumber of knives 4 piecessuction connection D 120 mmspace requirement approx. 2300 mm x 800 mm x 1000 mmstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as inspected,without warranty and guarantee Pgedpfjvwfxzox Adlsk

Condition: used, Year of construction: 1988, from training workshop, public authority pivotable for long workpieces used, in good condition machine cleaned, overhauled greased, function tested, trial run manufacturer Gea type Kapre 3000 year of manufacture 1988 one-sided from below press cylinder 1 heating rail working length 3000 mm Podowbi Exepfx Adlsgk pneumatically operated mobile New parts: mist lubricator compressed air lines 2 pot seals for press cylinder 2 pot seals for clamping cylinder plug for heating rail Storage location 97447 Gerolzhofen, loaded free on truck, unpacked Handover in current condition as inspected, without warranty or liability

Condition: like new (used), Year of construction: 2016, Cutter GEA CutMaster 500 VACUUM After capital renovation Psdjyn Dy Nspfx Adlegk 2016 year 3 months warranty for parts

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2212049506-010-0001, type of input current: AC, input voltage: 400 V, operating pressure: 3 bar, power: 11 kW (14.96 HP), input frequency: 50 Hz, protection type (IP code): IP55, rotational speed (max.): 2,900 rpm, volume flow: 50 m³/h, type of cooling: air, Used, completely overhauled pump in very good condition Psdeynxifopfx Adlegk

Condition: used, Used GEA Westfalia model HSB-300-06-777 stainless steel disc stack centrifuge. Inlet feed 1.16kg/dm3 & heavy liquid 1.30kg/dm3. Maximum rated 4,800rpm. Unit includes stainless steel collection pot, used Seepex pump, control cabinet.. Unit is driven by 75kw, 1486rpm, 400volt, 3/50 electric motor. Pjdpsykuimefx Adlsgk

Year of construction: 2002, condition: refurbished (used), CFS TWG 4800 / 600 Pgedpsfmkw Sofx Adlek ID.NO. 1812 CFS mod Twg 4800 / 600 double belted oil teflon cooker 2x 4.8 meters roasting area x 60 cm width. Year 2002 was directly withdrawn from production now this spring.

Condition: new, Year of construction: 2018, functionality: fully functional, GEA SCREWLOADER I500 ID.NO. 2719 Gea Screwloader I500 transport screw year mod 2018 but never been used New price over 100,000 Euro Sold now at heavily discounted price!! Dimensions 850 x 190 cm. Pgodpstrfy Ujfx Adlek

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Manufacturer: CFS (GEA) Type: Compact 420 Year: 2010 Electrical connection: 28 kW, 42 A, 400 V, 50 Hz Pgedpfx Adertq I Eslok Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 Year: 2010 with gas flushing including 4 format sets Condition: very good The metal detector and Espera conveyor visible in the picture are not part of this offer. They are separate machines.

Condition: good (used), functionality: fully functional, Equipment: documentation/manual, Spray Dryer: - Manufacturer: Niro Atomizer - Model: MSD - Capacity: up to 1,900 kg/h water evaporation - Design: Three-stage dryer - Drying air volume: 45,000 kg/h Evaporators/High Concentrators: Podpfjxgg Hbox Adlogk - Manufacturer: GEA/Laguilharre - Throughput: 12,500 l/h Including big bag and sack emptying station Evaporator (Pre-concentrator) - Make: GEA - Model: RM20 - Capacity (feed): 20,000 l/h - Operating principle: MVR and TVR (hybrid)

Condition: used, The Alfa Laval M10-MBASE is a compact and highly efficient plate heat exchanger, designed for demanding applications in the beverage and food industry, chemical processing, and general heating and cooling duties. Technical Specifications Type: M10-MBASE Heat transfer area: 2.6 m² Plate material: Stainless steel Alloy 316, thickness 0.50 mm Pgodpfx Adoxytv Nelek Gasket material: NBRFF Clip-On (Nitrile rubber) Plate pack thickness: 63 mm Total weight: 232 kg Total volume: 13 liters Dimensions: Height 672 mm, width 618 mm, depth 530 mm Connection standard: DIN NW100 Bolts: M20 Expandable: up to 17 additional plates Operating Data Design pressure: 10 bar Test pressure: 14.3 bar Design temperature: up to 120 °C Minimum temperature: 0 °C Typical flow examples (according to datasheet): Wine: 2,000 L/h (heating 12 → 17 °C, Δp = 47 kPa) Hot water: 2,000 L/h (cooling 30 → 24 °C, Δp = 22 kPa) Fruit juice: 240 L/h (heating 21 → 75 °C with 90 °C hot water, Δp ≈ 40–50 kPa) Design Features Plates with parallel flow channels ensure high efficiency and low pressure drop. Clip-on gaskets for easy maintenance and cleaning. Robust frame and pressure plate construction with M20 tightening bolts (length 360 mm). Flexible capacity expansion, up to 17 additional plates can be installed. User-friendly assembly with clear A/B plate markings. Typical Applications Beverage pasteurization (e.g., wine, juice, beer) Hot water and cooling water circuits CIP cleaning systems General process heat transfer in industrial applications

Condition: used,

Condition: used, Year of construction: 2020, functionality: unexamined, machine/vehicle number: 1739-596, rotational speed (max.): 4,800 rpm, Equipment: type plate available, Used disc stack separator for fermentation lees separation. Machine mounted on a complete skid with the option to purchase additional spare parts. Motor: 55 kW - 60 Hz. Belt drive. Permissible nominal bowl speed: 4,800 rpm. Minimum throughput: 8 m³/h; maximum throughput: 22 m³/h. Permitted feed product density: 1.16 kg/dm³. Permitted heavy liquid density: 1.1 kg/dm³. Permitted solids density: 1.3 kg/dm³. Maintenance tool set with ring spanner and compression tool included. Pjdjxy R A Tepfx Adlegk

Condition: used, Year of construction: 1990, Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels. Additional title: Keg spraying and keg brushing Max. capacity: 300 Kegs/h Capacity keg filling plant: 110 Kegs/h Pedsxwy H Aspfx Adlegk Voltage: 220/380 V Frequency: 50 Hz Length: ca. 2200 mm Width: ca. 1500 mm Formats: 30-litre and 50-litre kegs, EU format, with PU jacket Features: Spray jets, high-pressure pump, brush station, label discharge

Year of construction: 2001, condition: excellent (used), Westfalia decanter Psdpfxjd Rwwxs Adljgk Manufacturer: GEA Westfalia Separator AG Type: CA 365-010 Year of manufacture: 1978 bowl speed: 3.300 rpm Commissioning until: 2004 Field of application: In the production of base oils for the removal of solid particles. Decanters were taken out of operation after a production changeover in 2004 and is therefore fully functional.

Condition: used, Year of construction: 2012, GEA Milk Separator MSE 100-06-177 Year of manufacture: 2012 Maximum permissible drum speed: 7200 rpm Maximum permissible feed density: 1.0 kg/dm³ Podpfx Ajwayr Tjdlsgk Heavy liquid: 1.0 kg/dm³ Solids: 1.1 kg/dm³ Min./max. feed temperature: 5/100 °C Max. throughput: 30 m³/h

Year of construction: 2000, condition: excellent (used), Used high pressure homogenizer NS5160HA made by GEA Niro Soavi with an operating pressure of 700 bar and a throughput of 7.000 l/h. Sanitary version with five ceramic pistons, an operating temperature of 40°C and a maximum viscosity of 12.000 cP. Powered by an electric motor with 160 kW which needs three-phase current at 380 V and 50 Hz. The homogenizer was regularily checked and maintained and is fully functional. Pedpfxohzcxro Adlsgk

Condition: used, Year of construction: 2009, 2 GEA NH3 refrigeration compressors with frequency control (from a refrigeration system with max. 180 kW) Capacity: 145 m³/h each Additional title: Refrigerant NH3 Capacity: 145 m³/h Power: 37 kW Pgjdsxzqtnspfx Adlek Weight: 132 kg Position: Screwed onto concrete base Features: 2 x compressors: 145 m³/h, 26 kW with frequency converter, 37 kW rated power

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: type plate available, Two professionally disassembled compressors from the manufacturer GEA Bock. Technical data sheet available, see images. Pgodpfx Adowuvquelok