Used Guide And Tips Up To 500 Mm Spindle Lathe for sale (100,257)

Condition: good (used), Year of construction: 1999, CNC lathe Mori Seiki SL-150SY – MSC-501 Manufacturer: Mori Seiki Co., Ltd., Japan Model: SL-150SY Serial number: 1077 Year of manufacture: 1999 Hfodpfxezagqzo Airol Weight : Approximately 4.4 tons Control system Mori Seiki MSC-501 (Fanuc 18) CRT display with softkeys MDI / EDIT / AUTO modes Axis display: X, Z, C, Y, B Operating time power on 55000h Operating time approx.: 20000h Machine configuration CNC lathe with Y-axis C-axis on main spindle Subspindle (dual spindle configuration) Turret head, 12 positions Prepared for/equipped with powered tools Closed work zone Capacity: Max turning length: Max turning length 350 Max turning diameter: 300 normally, Ø170 if there are more tools on the turret Rod diameter: approx. Ø 45 mm Spindle speed main and sub spindle: up to approx. 5,000 rpm Driven tools: 4000 rpm Revolver: 12 stations Y-axis travel: approx. ±40–30 mm Spindle & clamping Hydraulic chucks (Kitagawa) Foot pedals: 4 pcs (separate control for main and counter spindle) Main spindle + counter spindle Automatic transfer between spindles Media & systems Hydraulic unit Central lubrication Cooling system Chip conveyor Electrical data 3~ 200V 50Hz Installed power: 41 kVA Full load current: 119 A Spindle motor: 76 A Breaking capacity: 5 kA Control panel & operator interface Full keypad Feed/spindle override MPG handwheel Key switch and safety interlock Condition / Function Regularly serviced machine Control system in operation, operated until it was recently disconnected. The brake on the main spindle can get stuck when operating with powered tools. Other CE marked Made in Japan

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Hfjdovhctwepfx Airjl Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital display, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant!! Technical specifications: Year of manufacture: 2006 Model: EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Hfedexyvaqspfx Airsl Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe for the highest demands: with stepless speed control, constant cutting speed and an impressive 7.5 kW drive power (40% duty cycle). This compact machine with outstanding performance is ideal wherever maximum precision is required in limited spaces, such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital display, year of manufacture 2006. This lathe is in excellent original condition and comes from a facility where it was only used occasionally for special applications. The control system is very user-friendly. The guideways are lubricated regularly by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our premises. You will find more lathes from renowned manufacturers on our website.

Condition: used, Year of construction: 1999, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF20 S Dnt Yob: 1999 Six-spindle automatic lathe with 6 main spindles Hedpfx Asx Sx Nhsirefl max. nominal diameter: D=20mm Spindle drum hirth coupled, CNC cross slide in positions 4, CNC cross slide in positions 5, pick up in position 6, sorting chute, 1x independent feed, thread cutting couplings, workpiece belt, Coolant tank with hinged belt chip conveyor Ruez, Oil/steel operation, PLC Siemens S7, Siemens CNC control, Siemens Simodrive 611, The scope of delivery regarding the tooling equipment could be different like pictures. Interface for: IEMCA PRA bar loading magazine (optional: IEMCA PRA40/31/ built in 1997 rear loader) *

Condition: excellent (used), Year of construction: 2017, operating hours: 2,728 h, Doosan Puma GT2100 CNC Slant Bed Lathe With Doosan-Fanuc I Series Control With Samchully MH-208 V1 Ø203mm 3 Jaw Power Chuck. Maximum Swing Ø600mm. Maximum Swing Over Cross Slide Ø390mm. Maximum Turning Ø390mm. Maximum Turning Length 562mm. Bar Capacity Ø65mm. Axis Travel 'X'=230mm, 'Z'=580mm. Rapid Feedrates 'X'=24m/min, 'Z'=30m/min. Spindle Nose A2-6. Maximum Spindle Speed 4,500rpm (18.5kW Motor). 12 Station Turret. Programmable Tailstock Travel 580mm, Tailstock Quill Ø80mm, Quill Travel 80mm, Taper MT4. Tool Shank 25 x 25mm. S/No. ML0228-001618 (2017). Note: Low Running Hours 2,728. Hedpfx Aijzt R Ucerjfl With Coolant System, Tool Setter, Parts Catcher, Ø165mm Collet Unit, Foot Switch, Quantity Of Assorted Hard/Soft Jaws & Manuals. Approx Dimensions L2,940 x W1,632 x H1,700mm. Weight 3,500kg.

Condition: good (used), Stock number: 2954 Hjdpfx Aeywf S Hoirsfl Manufacturer: Knuth Year of manufacture: 1990 Type / Model: Torro 250/1500 Serial number: Control: conventional Center distance: 1,500 mm Spindle bore: 60 mm Center height: 250 mm Swing diameter over bed: 500 mm In gap: 700 mm Over cross slide: 300 mm Speed range: 11.5 to 1,600 rpm Drive power: 7.5 kW Accessories/Equipment: thread cutting device Condition: good Weight: approx. 2.5 t Dimensions: 3,200 x 1,100 x 1,350 mm

Condition: ready for operation (used), Year of construction: 2004, Manufacturer: CE Johansson / Hexagon Metrology Model: Saphir 12.5-30-10 Machine Type: 9489-145 Serial Number: 8489-70305 Measuring Capacity X-axis: 1,250 mm Y-axis: 3,000 mm Z-axis: 1,000 mm Machine Dimensions Overall Width (B): 2,400 mm Internal Width (B₁): 1,450 mm Overall Length (D): 4,860 mm Hfjdpfxjzrvg Us Airel Overall Height (H): 3,790 mm Table Height (H₁): 700 mm Clearance Height (Hₚ): 1,150 mm Weight & Load Capacity Machine Weight: 8,200 kg Maximum Permissible Workpiece Weight: 6,000 kg Clamping Area: 1,450 × 3,400 mm Measuring Performance Resolution: 0.1 µm Accuracy (VDI/VDE 2617 Part 2.1): U₃ = 4 + 5L µm (L in meters) Speed & Acceleration Maximum CNC Speed: 500 mm/s Acceleration: 1,000 mm/s² Electrical Requirements Power Supply: 230 V ±10%, Single Phase, 50 Hz Power Consumption: 1,500 VA (10 A) Air Supply Operating Pressure: 6–10 kp/cm² (0.6–1.0 MPa) Air Consumption: 48 L/min at 5.5 kp/cm² (240 NL/min) Operating Environment Required Temperature Stability: ±1.0 °C Maximum Temperature Gradient: 0.5 °C Software PC-DMIS Version: CAD++ 2018 R2 (Release) Build: 535 (Pre-Release) Major Release Date: October 30, 2019

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, L & Z Lathe / DREHMA D 410x1500 / New - Unused / Showroom Machine -CE marking -3-axis digital display -Turning diameter over bed: 410 mm -Turning diameter over cross slide: 225 mm -Turning diameter in the crotch: 580 mm -Turning length: 1500 mm -Spindle bore: 52 mm -Speed range (geared): 45 - 1800 rpm -Automatic longitudinal/facing feeds -Threading / Metric / Inch etc. -Tailstock MK 4 Hedezv H Ikjpfx Airofl -Drive power: 3.5 kW -Central lubrication -Electric chuck guard -Chuck guard via steel support -Fixed and traveling steady rest -Multifix base with inserts -3-jaw chuck 200 mm -4-jaw chuck 250 mm -Faceplate -Coolant system -Work light -Foot brake -Traveling center & drill chuck -Machine feet -Documentation Dimensions: L x W x H 2.2 x 0.1 x 1.6 meters / Weight 1850 kg Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, arm reach: 3,900 mm, conveyor belt length: 8,000 mm, conveyor belt width: 600 mm, product height (max.): 2,600 mm, No reserve price – guaranteed sale to the highest bidder! The machine's original price in 2021 was EUR 1,480,000 (net)! TECHNICAL DETAILS Performance and Capacity Processing capacity: 60 pallets per day Boxes per pallet: up to 54 units Maximum box weight with 54 boxes: 15 kg Hfedpfexu Upmjx Airol Overall height from top of pallet: 2,500 mm Maximum total height (including pallet): 2,600 mm Maximum total load: up to 500 kg Process Times Stacking time per box: 12–15 s Wrapping time: approx. 30 s AGV cycle time (incl. pallet change, wrapping, labeling, transport): about 4 min Transport and Material Flow AGV travel distance: approx. 70 m Number of pallet change positions: 6 Available positions during pallet change: 5 Robot Industrial robot: 6-axis articulated arm robot Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % Protection class (robot): IP64 Robot control: KUKA, protection class IP54 Robot pedestal: height 1,500 mm Safety and Control Technology PLC: Siemens S7-1500 with MP 277 Touch Panel, 19" industrial PC panel Central safety control: with decentralized I/O modulation Profinet slave card: for PLC communication Safety light curtains: 1× A 1,500 mm with muting (3 for robot cell, 1 for door, 1 for wooden pallet stacking) Conveyor Technology and Pallet Handling Powered pallet conveyor: length 4 m, width 1,200 mm Pallet transfer station: GoPal E24/W for docking station Pallet station power unit: GoPal 400 / E24/W Pallet detection kit: included AGV System Transport unit: autonomous AGV GoBot GoPal E24/W Server: GoControl Operating unit: GoPal operating unit (1× call button) Interfaces: GoPal AUX Interface Box (I/O) Integration: fully integrated into AGV system Conveying Technology and Singulation Box conveying line: 17 m long, 600 mm wide Horizontal robot transfer section: 1 m Belt conveyor for boxes (new line): 8 m long, 600 mm wide Singulation system: pneumatic pusher Singulation stopper: included Pallet Stacking Systems Automatic pallet stacking system for Euro pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar Automatic pallet stacking system for wooden pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar MACHINE DETAILS System footprint: 5.6 m² (base area) Connected load: 38 kW Weight: 3,500 kg Note: Further information on the equipment configuration can be found in the attached specification sheet.

Condition: used, Year of construction: 1999, total length: 3,350 mm, total width: 1,550 mm, total height: 1,800 mm, Colour: White Empty weight: 3.300 kg In very good condition. In 2017 Refurbished for €32.000 - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: Teach-in Hfodpfeztxl Nox Airjl - Control system brand: Monforts - Control system type: Monforts Control System MTC K - Power [kW]: 15.0 - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 290 - Distance between centres [mm]: 1500 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 2 - Max. spindle speed [rpm]: 2800 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3350mm x 1550mm x 1800mm (l x w x h) - Transport weight [kg]: 3300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm Hodpfx Aijv D Ip Nsrofl with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Hfjdpsw Ew D Dofx Airjl Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Faceplate 1000 mm Travelling steady Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, X-axis travel: 140 mm Y-axis travel: +/- 40 mm Z-axis travel (1+2): 450 / 410 mm Turning length: 750 mm Turning diameter over cross slide: 250 mm Turning diameter: 190 mm Distance between centres: 750 mm Hfjdpfoyyupmsx Airol Max. bar diameter: 52 mm Spindle speed (max.): 4,000 rpm Main spindle speed range: 60 - 6,000 rpm Drive power - main spindle: 22 / 18.5 kW Max. torque: 198 Nm Counter spindle B-axis travel: 525 mm Feeds Feed rate X (1+2): 18,000 mm/min Feed rate Y: 6,000 mm/min Feed rate Z (1+2): 24,000 mm/min Feed rate B: 24,000 mm/min Number of turrets: 2 Number of tool stations: 2x 16 pos. Shank height for square tool: 20 mm Shank diameter for drills: 25 mm Turret indexing time: 0.2 s Tool holder: VDI 30 Speed range - driven tool stations (max.): 6,000 rpm Drive power - driven tool stations: 5.5 / 3.7 / 2.2 kW Rapid traverse X (1+2): 18 m/min Rapid traverse Y: 6 m/min Rapid traverse Z (1+2): 24 m/min Rapid traverse B: 24 m/min Rapid traverse C: 400 rpm MACHINE DETAILS Control: MSX 501 Fanuc drives Machine is in excellent condition

Condition: excellent (used), Voest DA 180 Voest Alpine DA 180 Conventional Lathe with Digital Readout, Year of Manufacture 1981, in Very Good Original Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: VOEST ALPINE Lathe Lead and feed screw lathe, Type DA 180/1, Year of Manufacture 1981 Swing over bed: 380 mm Swing over cross slide: 185 mm Turning length: 1,000 mm Hfjdpoxp I D Tefx Airol Centre height: 180 mm Bed width: 330 mm Spindle bore: 52 mm Tailstock taper: MK 4 Coolant system Motor: 380 Volt, 5.5 kW 12 spindle speeds: 44 - 2,000 rpm 66 longitudinal feeds: 0.072 - 4.038 mm/rev 66 cross feeds: 0.036 - 2.019 mm/rev 66 metric threads: 0.5 - 28 mm 66 inch threads: 1 - 32 TPI 66 module threads: 0.25 - 14 66 DP threads: 2 - 112 3-jaw chuck Weight approx. 1,200 kg Accessories and Equipment: 1 piece Röhm 3-jaw chuck 200 mm Multifix size B Digital readout About the Machine: We offer a Voest Alpine DA 180 conventional lathe with digital readout, year of manufacture 1981, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Voest also runs very quietly, even at high speeds. This newer generation of lathes is very operator-friendly and can produce grind-finish-quality surfaces. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself. You can find further drilling machines from reputable manufacturers on our website.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters Hedpswag Stefx Airofl >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: good (used), functionality: fully functional, turning diameter: 240 mm, turning length: 600 mm, For sale is a Boley lathe The guides and the concentricity are still very good (see pictures) center distance 600mm turning diameter 240 mm spindle bore: 20 mm Many accessories (cabinet incl.) IDEAL COLLECTION DATE 06.02.2024 On request, for an extra charge, loading and transport (Europe-wide) can be organized. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Hfodpfx Aierdf A Dsrsl Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH Signs of use present • Hardened and ground Z-axis guideway • Spindle mount: Camlock DIN ISO 702-2 No. 8 • Precisely machined carriage • Handwheels with adjustable fine graduation 0.04 / 0.02 mm • All guides adjustable via gib strips • Shafts, gears, and main spindle running in oil bath • Compound slide adjustment range ± 90° • Guaranteed spindle nose runout accuracy better than 0.015 mm • Gear wheels move smoothly, hardened and ground, mounted with 2 adjustable precision tapered roller bearings • Clearly arranged selector levers for feed speed selection • Enclosed rapid-shift feed gearbox design • Gears and shafts hardened and ground, running in oil bath on precision bearings • Switches with lifecycle calculation, tested according to EN ISO 13849 • Bed carriage with reversible operation via shift spindle • Centralized lubrication on bed carriage • Leadscrew cover • Emergency stop pushbutton, motor protection switch, lockable main switch • Tailstock quill and handwheel with adjustable fine graduation 0.025 mm • Fast, simple, tool-free adjustment via clamping lever • Heavily ribbed prism bed, inductively hardened and precision-ground from cast iron Hedpfx Aex Dzxaeirsfl • Coolant system with separate coolant tank, fill level indicator and oil separator; easy and complete draining and cleaning according to DIN • LED machine lamp in chip guard • Two gearbox stages • Spindle bore / bar capacity Ø 105 mm • Siemens Sinamics frequency converter / Safety Integrated • Drag chain for gentle routing of cables and hoses • Thread dial gauge scale adjustable • Quick-change toolholder SWH 7-C • 1 toolholder 32 x 150 Type D for 25 mm square tool bits • Digital position display DPA 21 • Glass scales Dimensions and Weight Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Range Centre height: 280 mm Centre distance: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Swing over cross slide: 355 mm Turning length in bed gap: 170 mm Bed width: 350 mm Speed range Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Output power (motor): 7.5 kW Total power rating: 8.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant System Coolant pump capacity: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. toolholder seat height: 25 mm Spindle taper: Ø 113 (Taper 1:20) mm Metric thread pitches: 0.1–14 mm/rev Number of metric threads: 47 Imperial thread pitches: 112–2 TPI Number of imperial threads: 60 Diametral pitch: 4–112 DPI Number of diametral pitch threads: 50 Module threads: 0.1–7 mm/rev Number of module threads: 34 Compound slide travel: 130 mm Cross slide travel: 316 mm Bed carriage travel: 1710 mm Longitudinal feed range: 0.031–1.7 mm/rev Number of longitudinal feeds: 42 Face feed range: 0.014–0.784 mm/rev Number of face feeds: 42

Condition: used, Year of construction: 2009, operating hours: 1,234 h, functionality: fully functional, machine/vehicle number: ABC123, input voltage: 400 V, year of last overhaul: 2025, total length: 4,000 mm, total width: 2,000 mm, total height: 2,000 mm, input frequency: 50 Hz, overall weight: 15,000 kg, control cabinet width: 6,000 mm, control cabinet length: 400 mm, control cabinet height: 800 mm, For sale: professional Diosna DSP 300 AF industrial dough mixer, manufactured in Germany and in excellent working condition. This is a high-capacity mixer designed for industrial bakeries and large-scale dough production. The mixer is located in Romania, Arad County, Pâncota, at Nicola SABB Bakery, where it can be seen in operation. More details are available by phone or WhatsApp. Videos of the mixer in operation can also be provided upon request. Main Features • Mixing capacity: up to approx. 300 kg dough / 180–190 kg flour Hjdpfx Aox Ta U Usirofl • Type: Double-spiral mixer with 6 removable bowls • Digital control panel with program management • Two mixing speeds: slow and fast • Manufactured in Germany (DIOSNA – Dierks & Söhne GmbH) • Very quiet and stable, equipped with safety cover sensor and automatic stop • Power supply: 400 V / 50 Hz / three-phase • Total power: 49 kW • Year of manufacture: 2009 Technical Condition Fully operational and currently in use for bread and bakery production. Owned and operated by our bakery since new (2009).

Condition: good (used), Year of construction: 1962, Centre lathe manufacturer VDF HEIDENREICH&HARBECK type: 24 RO, year of manufacture 1962, overhauled in 1992. Equipped with 3-axis digital readout Heidenhain, 250 mm Forkardt chuck, Multifix B toolholder. Hfedpfxoxziuwj Airel Centre height: 255 mm Swing over bed: 510 mm Swing over cross slide: 270 mm Distance between centres: 1000 mm Spindle bore: 55 mm Spindle speeds: 20 - 900 rpm, Motor power: 6.5 kW The machine is in good condition, electrical diagrams available. Required floor space: Length 3 m, Depth 1.2 m, Height 1.3 m, Weight approx. 1800 kg.

Year of construction: 1988, condition: excellent (used), Splash guard 5256 Diameter 500 mm Height 100 mm Hfsdpfxsd Tyxgo Airel

Condition: used, Year of construction: 2000, Technical details: number of spindles: 6 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2000 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm pick-up unit, Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; Hsdpfoyqwviox Airjfl tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), functionality: fully functional, Used L + Z lathe with 3-axis digital readout Hfjdpfovadqzsx Airol Manufacturer: WEILER Type: Condor 81 B Machine. No.: 87596 Year of manufacture: approx. 1987 Center distance: 750 mm Turning diameter over bed: Ø 330 mm Center height above bed: 165 mm Turning diameter over support: Ø 180 mm Center height above support: 90 mm Spindle bore: Ø 40 mm Tailstock inner taper: MK 3 Pinol adjustment: 110 mm Spindle speed: 45 - 2800 rpm. (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor stage 1+2) Mains connection: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment + accessories: - 3-axis digital readout from Heidenhain type VRZ 750 - Quick clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix size B quick-change steel holder - LED work light - Bed stop - Automatic longitudinal & face feeds - Electro-mechanical spindle brake switchable - 2x emergency stop - Electrical feed key query (via sleeve with button) - Coolant tank with pump in the machine base - Folding chuck guard - Splash guard - Circuit diagram - Adjustable machine feet Space requirement: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This new generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated on site under power. All information without guarantee. Subject to prior sale.

Condition: used, Year of construction: 2003, Technical details: number of spindles: 6 spindle passage: 36 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Hfjdpeyqpqxjfx Airjl Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=36mm!!! Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images; various collets are included in delivery up to D36mm Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 1967, LZ-Lathe Fabr.WEIPERT TYPE:UD 500 e year 1967 with digital readout ,top support feed tool holder MULTIFIX size C ,Forkardt chuck 315 mm. Hsdsu Rd H Ispfx Airofl Center height : 250 mm Center width : 1500 mm spindle bore : 65 mm Spindle speed : 14 -1400 rpm Machine is in good condition .

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Hjdpotqmwgsfx Airefl Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Lubeca LW303 can seamer