Used 6 Spindle Automatic Lathe for sale (49,992)

Condition: used, Year of construction: 1970, number of spindles 6 diameter 160 mm turning length ? mm total power requirement 0 kW weight of the machine ca. 0,9 t Ccnnykrj dimensions of the machine ca. 1,2*0,8*1 m

Year of construction: 1987, Condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db Gvd8O3Dz8 - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: ready for operation (used), Year of construction: 1997, A Mori-Say 6/32M multi-spindle curve lathe is available. Number of spindles: 6, max. spindle speed: 3750 rpm, max. bar diameter: 40mm. Dimensions X/Y/Z: approx. 6200mm/1600mm/2050mm, weight: approx. 9500kg. 0Vpkrxn3

Year of construction: 2001, Condition: good (used), GENERAL Project No: 905433 Quantity: 1 pc. Manufacturer: TORNOS BECHLER Type: MultiDeco 20/6 Control: Tornos Bechler Fanuc PNC Deco Year of Manufacture: 2001 Condition: Used Machine Machine on approx. [h]: 77.725 Shifts approx.: 2-3 shift DESCRIPTION TURNING 18 Axis Max. turning diameter 20 mm 6 pc. Main spindle/-s Max. speed main spindle 6000 1/min Max. power main spindle at 10-40/100% duty ratio 15 kW FURTHER EQUIPMENT Fully enclosed work area Light in working area Preparation for central oil-/emulsion mist extraction unit Slat band chain chip conveyor MAYFRAN Consep 2000 Machine operates/operated with oil Coolant unit Automatic CO2-fire extinguishing system Bar loader/magazine ROBOBAR MSF 522/6 GENERAL TECHNICAL DATA Total power requirement 43 kVA Bdk79Uuc Machine dimensions (LxWxH) approx. 3500x1600x1950 mm Machine weight approx. 8500 kg REMARKS – Position 1/2/3/4/5: identically equipped with CNC-cross slide X/Z (longitudinal unit Z) – Position 6: CNC-plunge cut, back side drilling unit, opposing spindle – Length measuring system – 4 Stck. Bohraparate mit Werkzeugaufnahme – 1Stck. Schnellbohrspindel mit Werkzeugaufnahme – 1 Stck. Gegenspindel – 3 Stck. Drehhalter – 1Stck. Abstechhalter – 1 Stck Hinterbohrhalter – 2 Stck Bohrerbruchtaster – 1 Stck Längenmeßtaster mit Erstteilsortierung We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: used, Year of construction: 1984, spindle passage 60 mm Ctpdp8Wqk0 weight of the machine ca. 0,6 t

Condition: used, Year of construction: 2015, machine/vehicle number: 270240, number of spindles:6 spindle passage:40 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel Cmj0Rilum8 ?Production with OIL Machine has only Single-NCU without PCU.

Condition: used, Year of construction: 2007, turning diameter 18 (16) mm turning length - mm control Siemens spindle circle diameter 180 mm Cmfm9J2W7O bar feed max. 80 mm longitudinal slide -travel 50 (63) mm cross slide - travel 20 (32) mm Spindlespeed 800 - 8.000 min/-1 power capacity - main spindel 11 kW Torque 18 Nm dimensions of the machine ca. 6,0 x 1,5 x 2,2 m weight of the machine ca. 5,5 t CNC-Bar-Automatic-Turning Machine SCHÜTTE - SG 18 - Co2 fire extinguishing system Kraft&Bauer - Ruez scraper belt conveyor - IEMCA bar feeder PRA 52 42 F - Tool package - Curve package - various clamping devices

Condition: new, Year of construction: 2022, Functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter Dwgirtpq9Z machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA installation and training not included. ( price depend on loacation and on request)

Condition: used, Year of construction: 2006, Ref. -No.: 10402 Manufacturer: GILDEMEISTER Type: Gildemeister GMC 35 ISM Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840D PowerLine Storage location: Halberstadt Country of origin: Germany Machine-No.: 5702-0027 work spindles: 6 Turning Speeds: 6300 RPM C-Axis: Ausricht- und Schalteinrichtung Spindle passage: 32 mm Spindle power: 6 x 4 kW Capacity At 100% Load: 6 x 4 kW Max. Torque: 6 x 15 Nm Rapid Travel Speed X-Axis: 12 m / min Rapid Travel Speed Z-Axis: 12 m / min Travel -X Axis: 68/100 mm Travel -Z Axis: 68/100 mm Connected Load: 107 kVA Machine length: 7000 mm Machine width: 1800 mm Machine Height: 2400 mm Further information: Features: 5 cross slides for machining in X and Z Pick-up spindle freely programmable in position 6 5 front spindles of which 5 can be driven 4 U-axes electrically prepared 1 axis for back machining on the pick-up spindle Kraft and Bauer CO² fire extinguishing system Hinged belt chip conveyor Artis tool breakage control Tool carrier: Number: 12 Axes X/Z: 68/100 mm Rapid traverse X/Z: 12 m/min Tools for backworking: 1 Bar loading magazine: IEMCA Sir 36P; type 33 F Year of manufacture 2006 Serial number 020440MA04 Bar length 3000mm Knoll high pressure system AE1114: Year of construction 2006 Filter system Pumps 5Bar and 40Bar individually adjustable for the processing steps Heat plate exchanger Lifting pump from the chip conveyor Qedmo8V Machine is in operation under power and can be inspected by appointment.

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX total power requirement 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt Br37Vijxkl8 - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant

Condition: used, Year of construction: 1993, number of spindles:8 spindle passage:32 mm Bkhqo8Kmwy3 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 Dnt Yob: 1993 eight-spindle automatic lathe eight main spindles for bars up to D=32mm Modernized control: Siemens Sinumerik Motors: renewed modern motors suitable for modernized control system Electronic trip dog control: Balluff CNC cross slide position 5 cross CNC cross slide position 6 cross Preparation for gripper in position 8 (gripper optional) Independent feeds Thread cutting couplings integrated bar loader: Pietro CUCCHI; type: rack type magazine The scope of delivery regarding the tooling equipment could be different like pictures.

Condition: used, Year of construction: 2008, machine/vehicle number: 23-07, number of spindles:6 spindle passage:18 mm turning length:63/50 mm Twl988Gf weight of the machine ca.:4,5 t spindle drive motor:11 kW

Condition: used, Year of construction: 1990, turning diameter 60 mm turning length 200 mm number of slides total power requirement 20 kW weight of the machine ca. t Dpfk8P dimensions of the machine ca. m

Year of construction: 1998, Condition: excellent (used), Thread cutting machine, recoil spindle, thread milling machine, cams, collets, several tool holders brand Göltenbodt Blyyrt32Sh

Condition: used, Year of construction: 1990, Ref. -No.: 10419 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 1990 S7Qngpt Storage location: Halberstadt Country of origin: Germany

Condition: used, Year of construction: 1987, number of spindles:8 spindle passage:51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control ?Balluff? clear text display Wöhrle coolant pump magnetic cartridge filter oil running Noscpne incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at) or

Condition: used, Year of construction: 1999, machine/vehicle number: 49-02, number of spindles:6 spindle passage:18 mm Buokthet turning length:63/50 mm weight of the machine ca.:4,5 t spindle drive motor:11 kW

Year of construction: 1988, Condition: used, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 1988 T2Kcy97 Storage location: Halberstadt Country of origin: Germany

Condition: used, Year of construction: 2019, Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2019 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps Suoqz optional: setting robot make HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on or

Condition: used, Year of construction: 1987, machine/vehicle number: 9/10, number of spindles:8 8Hwlkfl3Cw

Condition: used, Year of construction: 1990, Ref. -No.: 10420 Manufacturer: SCHüTTE Type: SF 26 Bseovrk0Jxy Year of construction: 1990 Storage location: Halberstadt Country of origin: Germany work spindles: 6

Condition: used, Year of construction: 2016, Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2016 Bk3Mism3 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 3 x Y-axis, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot, manufacturer HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on or

Condition: used, Year of construction: 2015, Ref. -No.: 10418 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Bseoutrexho Storage location: Halberstadt Country of origin: Germany work spindles: 6

Condition: used, Year of construction: 1991, number of spindles:6 spindle passage:51 mm Schutte SF51 DNT, yob. 1987, our ID #61868 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF51 DNT Yob: 1987 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=51mm electronic cam control Balluff gripper in position 6 for backworking, sorting chute independent longitudinal feed layer 5 screw chip conveyor Tapping couplings Bbhkobhvnm Interface for: Bar feeder IEMCA PRA Bar feeder IEMCA PRA40/33/F Scope of delivery without the blue chip conveyor The tooling will differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at) or

Condition: used, Year of construction: 1994, number of spindles:8 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! N02Kb7Ut Please, contact us for getting more information and pictures on mail(at) or