Used Haas St 20 Y for sale (226)

Condition: used, Year of construction: 2018, HAAS ST20Y, year 2018 Y-axis C-axis Live tooling Chuck diameter 210mm Max. spindle speed 4000 rpm Spindle bore 51mm Z-axis travel 533mm Y-axis travel ±51 mm X-axis travel 236 mm Tool turret with 24 positions on BMT65 Iijdpfx Aez N Splom Doh Programmable tailstock Tool probe Part catcher Chip conveyor Tool holders: 9 standard Powered tool holders: 2, 1/1

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Iedpfx Asvwz T Uom Dsih

Condition: excellent (used), Year of construction: 2020, 2020 Haas ST-25 CNC Slant Bed Lathe & Tooling Package Haas Autogrip 3H-H12 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Maximum Cutting (Varies With Turret) Ø381mm. Bar Capacity Ø76mm. Axis Traverses 'X'=236mm, 'Z'=527mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,400rpm (22.4kW Motor). Spindle Nose A2-6. 12 Station Turret. Power On Hours 1,979. S/No. 3119435 (2020). Iedpfxsz Rqmrs Am Djih With Coolant System (Tank Capacity 208L), Marposs Tool Setting Arm, Tailstock, Footswitches, Signal Tower, Tooling Package (Turning Tools, Jaws, Collets & coolant Fixings) & Manual. Machine Foot Print W3,630 x D2,290 x H2,340mm. Weight 4,536kg.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,375 h, functionality: fully functional, machine/vehicle number: 3096542, HAAS ST-20 – CNC Lathe – Manufactured 07/2013 For sale: HAAS ST-20 CNC, manufactured in July 2013, Made in U.S.A. Condition: Low running hours, excellent condition, fully operational, all inspections / services done. Machine details: • Manufacturer: HAAS Automation • Model: ST-20 Iiedjz Ag Svepfx Am Deh • Year of manufacture: 2013 • Serial number: 309652 • Power supply: 360–480 V, 3-phase, 50/60 Hz • Full Load: 20 A • Largest Load: 35 A • Haas CNC control • Complete machine, available for inspection • Power-On Time: 1,375:33:11 • Cycle Start Time: 320:43:06 • Feed Cutting Time: 251:20:50 The machine is in good condition and is suitable for production, prototyping, and general CNC machining. Price: 31.500 EURO Location: Baia Mare, Romania

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 572 mm, spindle motor power: 14,900 W, overall weight: 4,000 kg, controller manufacturer: HAAS, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2022. This HAAS ST-20 features a maximum cutting diameter of 13.00 in and a maximum cutting length of 22.5 in. It includes a robust spindle power rating of 20.0 hp and a rapid rate of 945 ipm for both axes. If you are looking to get high-quality turning capabilities, consider the HAAS ST-20 machine we have for sale. Contact us for further details. • Chuck size: 8.3 in / 210 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (BOT turret): 13.00 in / 330 mm • Max cutting diameter (BMT65 turret): 11.75 in / 298 mm Iedpfx Amjz Ha Upj Doih • Max cutting length: 22.5 in / 572 mm • Bar capacity: 2.50 in / 64 mm • X-axis rapid rate: 945 ipm / 24.0 m/min • Z-axis rapid rate: 945 ipm / 24.0 m/min • X-axis max thrust: 4,100 lbf / 18,238 N • Z-axis max thrust: 5,100 lbf / 22,686 N • Spindle nose: A2-6 • Spindle drive system: Direct speed, belt drive • Spindle max torque: 150.0 ft-lbf @ 500 rpm / 203.0 Nm @ 500 rpm • Spindle bore: 3.50 in / 88.9 mm • Turret stations: 12 stations (VDI 40) • Boring bar rear clearance: 4.00 in / 102.0 mm • Coolant tank capacity: 55 gal / 208 L • Coolant pump: 1 HP / 0.75 kW variable-flow (45 L/min @ 2 bar) • Air requirement: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Air pressure minimum: 80 psi / 5.5 bar • Air line / coupler size: 3/8 in • Low voltage electrical: 220 VAC (3 phase), 40 A full load • High voltage electrical: 440 VAC (3 phase), 20 A full load (internal non-isolated transformer 380–480V included) • Shipping dimensions: 143 in x 90 in x 92 in / 362 cm x 229 cm x 234 cm • Control system: Haas NextGen Control with touchscreen interface, 1 GB memory, Ethernet, Wi‑Fi, HaasConnect Remote Monitoring, and Haas Drop • Included machine features/options: Automatic Tool Presetter; Programmable Hydraulic Tailstock (MT4); Rigid Tapping; M130 Media Display; Safe Run; Power Failure Detection Module; Visual Part Programming System Additional equipment • Belt-type chip conveyor • Chip strainer filter kit (200 micron) Technical Specification Taper Size VDI 40 Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,045 h, functionality: fully functional, machine/vehicle number: 3116946, turning diameter over cross slide: 279 mm, turning length: 406 mm, turning diameter: 279 mm, spindle bore: 64 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 406 mm, spindle motor power: 15 W, rotational speed (min.): 4,000 rpm, rotational speed (max.): 6,000 rpm, total height: 2,167 mm, total length: 3,395 mm, total width: 1,612 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 30 m/min, workpiece weight (max.): 3,583 kg, type of input current: three-phase, overall weight: 3,583 kg, spindle nose: -, Equipment: documentation/manual, Used turning center for sale – CNC lathe with Y-axis and driven tools, in very good condition. Contact us for further details. Model: HAAS ST-15Y Year of manufacture: 2019 Maximum turning diameter: 305 mm Reblezr E H Djvzwyrecf Maximum turning length: 406 mm Isdpfx Amjzr E H Dj Dsih Y-axis travel: 102 mm Bar capacity: 64 mm Chuck size: 8 inches Maximum spindle speed: 4000 rpm Number of controlled axes: 4 Spindle motor power: 14.9 kW Tool size: BOT 6/12 VDI40 Controls: HAAS 2019 Voltage: 440V AC Weight: 3583 kg Dimensions (L x W x H): 3030 x 1550 x 1810 mm Additional Equipment: VPS Programming System, Hydraulic Tailstock, HAAS Auto-door, Chip conveyor, 6000 rpm Live Tools Resale capability included. The center is in very good condition. It is currently in continuous operation and connected to power. The machine operated in one shift.

Condition: good (used), Year of construction: 2019, In good technical condition and fully functional. Year of manufacture: 2019 - Max. turning diameter: 220 mm (for standard turret) - Max. turning length: 356 mm - Chucking diameter over bed: 641 mm - Chucking diameter over cross slide: 413 mm - X/Z-axis travel: 200 / 356 mm - Rapid traverse X/Z-axis: 30.5 m/min - Spindle size: A2-5 - Max. power: 11.2 kW, spindle drive: vector drive - Max. torque: 102 Nm - Max. spindle speed: 6,000 rpm - Bar capacity (spindle bore): 44 mm Iijdjy Hgvxspfx Am Dsh - Automatic hydraulic chuck: 165 mm - 12-position tool turret VDI40 (option BOT or hybrid) - Option for driven tools and C-axis on spindle - Coolant tank: 114 l with pump - Electrical connection: 3x400 V / 50 Hz, 14 kVA - Machine weight: 3,450 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Bar capacity, maximum speed: 51mm, 4000rpm Maximum power rating, drive system: 22.4kW, belt drive Spindle nose, chuck size: A2-6, 210mm Axis travels (X, Z): 236mm, 533mm 12-station VDI tool turret Haas controller Rigid tapping option Iijdpfx Amevamdqe Dsh Automatic tool presetter Belt-type chip conveyor Programmable hydraulic tailstock Manufactured in 2013 Machine in very good condition. Machine fully inspected, cleaned, and aligned. More pictures and videos are available.

Condition: excellent (used), Year of construction: 2019, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 457mm, 762mm between centres, 584mm maximum cutting length, 0.01 degree C axis, 3000rpm Milling 3.7kW, +/- 50mm Y axis, 76mm Bar capacity, Isdpfszg Efisx Am Deih 22.4kW Spindle Motor, 3400rpm spindle, 24m/minute rapid feedrate, 24 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you: Manufacturer: Haas Model: ST-30Y Year of manufacture: 2019 Control: Haas Technical Data: Max. swing diameter: 533 mm Max. machining diameter (with BMT 65): 349 mm Distance between centers: 826 mm Bar capacity: max. 76 mm Travel distances: X-axis travel: 239 mm Y-axis travel: +/- 51 mm Z-axis travel: 826 mm Main spindle: Spindle speed: 3,400 rpm Drive power: 22.4 kW Turret: Number of tool stations: 12 positions Tool holder: BMT 65 Rapid traverse rates: Rapid traverse (x, y, z): 12 / 12 / 24 m/min Technical features & accessories: - Driven tools (C-axis) - Automatic tool presetting arm - Coolant tank - Coolant pump Iodpfoyzz Urex Am Doih - Chip conveyor - 254 mm chuck - Tailstock Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to alterations and errors in technical details and information, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,111 h, spindle speed (max.): 4,000 rpm, controller manufacturer: HAAS, controller model: n/a, This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine. Additional equipment • Additional Options: Driven 4000 rpm tool and C-axis, 12 stations BMT65, Automatic tool presetting arm • Features: Hinged belt chip conveyor, Lathe parts catcher Iiodpfsx D Ezfex Am Doh • Coolant System: 208l coolant tank, Variable coolant flow • Other Features: Visual part programming system (1GB), Hydraulically actuated 210mm chuck A2-6, Early detection module for power failure, Synchronized tapping, safe running, Control touchscreen, Ethernet, HaasConnect, HaasDrop, M130, WLAN • Additional Features: Macros, SOM Machine Benefits Technical Machine Benefits • Maximum load capacity: 330 x 572 mm / diameter range for bars: 64 mm • Type: vdi turret with 12 tool stations • Type: programmable hydraulic tailstock • Preparation for robot / driven toolschip conveyor and tool measurement are includedOPTIONAL: Tool holders at an additional cost. See pictures attached

Condition: used, Year of construction: 2022, HAAS ST25Y with counter-spindle, year 2022 maximum machining diameter: 298 mm, cutting length: 572 mm, spindle through-hole: 76 mm, 12-position BMT65 turret, Y-axis travel: +/- 50.8 mm, HAAS control system, Iisdpfjzk H Hvsx Am Dsh 3-jaw chuck, 254 mm, -counter-spindle -chip conveyor, -swarf tray with pump, -measuring probe, -parts catcher low operating hours, excellent condition.

Condition: good (used), Year of construction: 2007, functionality: fully functional, HAAS VF-2SSHE + MIDACO Pallet System – 2007 CNC Vertical Machining Center with Pallet System Iiedpfxsz Dq Nfs Am Doh For sale: HAAS VF-2SSHE CNC vertical machining center, equipped with a MIDACO pallet system. The machine is installed, in working condition, and available for inspection and testing while powered on, by prior arrangement. Technical data: Manufacturer: HAAS Model: VF-2SSHE Year of manufacture: 2007 Serial number: 1061369 X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Spindle taper: ISO 40 Automatic tool changer MIDACO pallet system included Power supply: 360–480 V / 3 phase Machine in good working condition Inspection and test run possible while powered on The MIDACO pallet system allows workpiece preparation outside the machining area and can help reduce loading and unloading times, making the machine particularly suitable for series production. Further technical details and the exact machine configuration can be verified during an on-site inspection.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 572 mm, spindle motor power: 22,400 W, overall weight: 5,580 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis HAAS ST-25Y was manufactured in 2022. It features a maximum cutting diameter of 11.75 in and a maximum cutting length of 22.5 in. The machine is equipped with a 10 in chuck size and a robust spindle speed of 3400 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-25Y horizontal turning machine we have for sale. Contact us for further details. • Working hours: 0 (showroom machine) • Chuck size: 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 11.75 in / 298 mm • Max cutting length: 22.5 in / 572 mm • Bar capacity: 3.00 in / 76 mm • Rapids (X / Y / Z): 472 ipm (12.0 m/min) / 472 ipm (12.0 m/min) / 945 ipm (24.0 m/min) • Max thrust (X / Y / Z): 4100 lbf (18238 N) / 2300 lbf (10231 N) / 5100 lbf (22686 N) • Spindle nose: A2-6 • Max spindle torque: 300.0 ft-lbf @ 500 rpm / 407.0 Nm @ 500 rpm • Spindle bore diameter: 3.50 in / 88.9 mm • Main spindle C axis max rating: 5.0 hp / 3.7 kW • Main spindle C axis max speed: 60 rpm • Main spindle C axis positioning: ± 0.01° • Main spindle C axis brake diameter: 13.9 in / 353 mm • Main spindle C axis brake holding torque: 250 ft-lbf / 339 Nm • Sub-spindle chuck size: 5.3 in / 135 mm • Sub-spindle nose: A2-5 • Sub-spindle max speed: 6000 rpm • Sub-spindle max sync speed with main spindle: 3400 rpm • Sub-spindle chuck throat: Ø 1.30 in x 1.37 in deep / Ø 33.0 mm x 34.8 mm deep • Sub-spindle drawbar bore (non-through): Ø 1.00 in x 4.50 in deep / Ø 25.4 mm x 114.3 mm deep • Sub-spindle bore (without chuck and drawbar): 1.50 in / 38.1 mm • Sub-spindle integrated brake torque: 17 ft-lbf / 23 N·m • Sub-spindle orientation accuracy: ± 0.02° • Sub-spindle rapids (B-axis): 400 ipm / 10 m/min Isdpfx Aoz N Dmvsm Doih • OD vs ID tools: Any combination • Boring bar rear clearance: 4.00 in / 102.0 mm • Live tooling max speed: 4000 rpm • Live tooling interface: BMT65 • Coolant capacity: 55 gal / 208 L • Air requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline air hose and coupler: 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Drive system: Direct speed, belt drive • Electrical requirements: Low 220 VAC @ 70 A / High 440 VAC @ 35 A (3 Phase) • Shipping dimensions (domestic): 142.0 in x 90.0 in x 92.0 in / 361 cm x 229 cm x 234 cm Technical Specification Driven Tools Yes Counter Spindle Yes

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, chuck outer diameter: 160 mm, Delivered new in 2023 . pictures show covers off while being serviced- showing as new condition inside. High spec machine as new. Iiodpfx Aox U D Etom Djh Tool setter swarf conveyor Tailstock Parts catcher Tooling as show. ONLY 600 CUTTING HOURS, NEAR NEW CONDITION Omega Design solutions run over 20 Haas machines and can help with all aspects of getting this machine up and running on you parts.

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 406 mm, spindle motor power: 11,200 W, number of axes: 3, This 3-axis HAAS ST-10Y was manufactured in 2023. It features a maximum cutting diameter of 11.00 in and a maximum cutting length of 16.0 in. The machine is equipped with a 12-station turret and offers rapid movements of up to 1200 ipm on the Z-axis. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10Y horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 6.5 in / 165 mm • Max Part Swing: 16.5 in / 419 mm • Max Cutting Diameter: 11.00 in / 279 mm (with BMT45 turret) • Max Cutting Length: 16.0 in / 406 mm • Bar Capacity: 1.75 in / 44 mm • Rapids on X: 472 ipm / 12.0 m/min • Rapids on Y: 472 ipm / 12.0 m/min • Rapids on Z: 1200 ipm / 30.5 m/min • Max Thrust X: 2400 lbf / 10676 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 3700 lbf / 16458 N • Spindle Nose: A2-5 • Spindle Max Torque: 75.0 ft-lbf @ 1300 rpm / 102.0 Nm @ 1300 rpm • Draw Tube Bore ø: 1.81 in / 46 mm • Spindle Bore ø: 2.31 in / 58.7 mm • Main Spindle C Axis Max Speed: 60 rpm • Main Spindle C Axis Positioning: ± 0.02° • Sub-Spindle Chuck Size: 5.3 in / 135 mm • Sub-Spindle Max Speed: 6000 rpm • Tailstock Taper: MT3 • Tailstock Hydraulic Quill Travel: 3.8 in / 95 mm • Turret Stations: 12 Stations (BMT45) • Live Tooling Max Speed: 4000 rpm • Coolant Capacity: 30 gal / 114 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Shipping Weight: 7900 lb / 3584.0 kg Additional equipment • Robot Package Max Load Capacity at Wrist: 15.4 lb / 7 kg • Robot Package Reach: 35.9 in / 911 mm • Robot Package Repeatability: 0.0004 in / 0.010 mm • Robot Single Gripper Max Part Weight: 7.9 lb / 3.6 kg • Robot Dual Gripper Max Part Weight: 5.0 lb / 2.3 kg per gripper Technical Specification Iisdpfxoz Nz T Hs Am Dsh Counter Spindle Yes Driven Tools No

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 2,400 rpm, travel distance X-axis: 508 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 711 mm, spindle motor power: 29,800 W, overall weight: 9,253 kg, number of axes: 4, This 4-axis HAAS ST-40SY was manufactured in 2025. It features a maximum part swing of 35.5 in and a maximum cutting diameter of 27.5 in. The machine is equipped with a 12-station turret and live tooling capabilities, allowing for versatile machining operations. If you are looking to get high-quality turning capabilities, consider the HAAS ST-40SY horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 15.0 in / 381 mm • Max Part Swing: 35.5 in / 902 mm • Max Cutting Diameter (with BMT75 turret): 27.50 in / 699 mm • Max Cutting Length: 28.0 in / 711 mm • Bar Capacity: 4.00 in / 102 mm • X Axis Rapids: 472 ipm / 12.0 m/min • Y Axis Rapids: 472 ipm / 12.0 m/min • Z Axis Rapids: 710 ipm / 18.0 m/min • Max Thrust X: 5500 lbf / 24465 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 9000 lbf / 40034 N • Spindle Nose: A2-8 • Drive System: 2-Speed Gearbox • Spindle Max Torque: 1400.0 ft-lbf @ 150 rpm / 1898.0 Nm @ 150 rpm • Spindle Bore ø: 4.62 in / 117.3 mm • XP Option Drive System: 2-Speed Gearbox • XP Option Max Rating: 55.0 hp / 41.0 kW • XP Option Max Speed: 2400 rpm • XP Option Max Torque: 2100.0 ft-lbf @ 150 rpm / 2847.0 Nm @ 150 rpm • Main Spindle C Axis Max Rating: 5.0 hp / 3.7 kW • Main Spindle C Axis Max Speed: 49 rpm • Main Spindle C Axis Positioning: ± 0.01 ° • Main Spindle C Axis Brake Diameter: 21.5 in / 546 mm • Main Spindle C Axis Brake Holding Torque: 450 ft-lbf / 610 Nm • Tailstock Taper: MT5 • Tailstock Travel: 26.0 in / 660 mm • Tailstock Max Thrust (Acme): 3,000 lbf / 13,345 N • Tailstock Min Thrust (Acme): 200 lbf / 890 N • Turret Number of Tools: 12 Stations • Turret Index Time (one tool): 2 s • Turret Tooling: BMT75 Iedpoz Nx Rcsfx Am Dsih • Live Tooling Max Speed: 4000 rpm • Live Tooling Tooling: BMT75 • Coolant Capacity: 95 gal / 360 L • Air Requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC • Full Load Amps (3 Phase) - Low: 70 A (Standard) / 105 A (XP Option) • Input AC Voltage (3 Phase) - High: 440 VAC • Full Load Amps (3 Phase) - High: 35 A (Standard) / 53 A (XP Option) • Domestic Pallet Dimensions: 217.0 in x 95.0 in x 116.0 in / 551 cm x 241 cm x 295 cm • Export Crate Dimensions: 217.0 in x 95.5 in x 120.5 in / 551 cm x 243 cm x 306 cm • Export Crate Weight: 22,141 lb / 10,043.0 kg Additional equipment • Chip conveyor • Remote jog handle / CNC control pendant • Auto-door feature • Eppinger Preci-Flex live tooling holders • Samchully 3-jaw chuck • Tool setter / touch probe • Coolant/air blow hose Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2013, operating hours: 2,995 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, controller manufacturer: HAAS, table width: 267 mm, table length: 1,467 mm, table load: 159 kg, overall weight: 2,295 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, number of slots in tool magazine: 10, number of axes: 3, This 3-axis HAAS HAAS TM-2P was manufactured in 2013. It features an X-axis travel of 1016 mm, Y-axis travel of 406 mm, and Z-axis travel of 406 mm. The machine includes a table size of 1467 x 267 mm and a maximum table load of 159 kg. If you are looking to get high-quality machining capabilities, consider the HAAS HAAS TM-2P vertical machining centre we have for sale. Contact us for further details. • Max tool diameter: 89 mm • Positioning accuracy: 0.01 mm • Repeatability: 0.01 mm • Air pressure: 6.9 bar • Air consumption: 113 l/min • Power supply: 3 × 400 V, 50 Hz Iodpfxezcnzmo Am Deih Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2019, This 4-axis HAAS ST-15Y was manufactured in 2019 and features Y and C axes with driven tools, D210 hydraulic chuck, 65 mm spindle bore, hydraulic programmable tailstock, 12-station VDI-40 turret, and chip conveyor. If you are looking to get high quality turning capabilities consider the HAAS ST-15Y machine we have for sale. Reach out for more information. Iiedpfxszvbppe Am Djh Additional equipment • Driven tools Machine Benefits Technical Machine Benefits • D210 hydraulic chuck. • D65mm main spindle bore. • Hydraulic programmable tailstock. • 12 pcs turret head. Vdi-40 • X, Z, Y, C-axis. • C-axis with hydraulic brake.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,316 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 572 mm, number of axes: 3, This 3-axis HAAS ST-20Y was manufactured in 2014. It features a CNC lathe with C and Y-axis capabilities, a spindle speed of 4000 rpm, and a chuck size of 8 inches. Additional features include a 12-station turret, chip conveyor, and a programmable hydraulic tailstock. Ideal for precision turning operations. If you are looking to get high-quality turning capabilities consider the HAAS ST-20Y machine we have for sale. Contact us for more information about this machine. • Chuck size: 8" (210 mm) • Programmable hydraulic tailstock: MT4 • Standard program memory: 1 GB Iisdjx D Nzpopfx Am Dsh Additional equipment • Chip conveyor • Automatic tool presetter • Part catcher • USB port • 6 live tools (3 axial and 4 radial) • BOT holder and VDI holder

Condition: excellent (used), Year of construction: 2017, Haas ST 15 Year of manufacture: 2017 RPM: 3500 Tool setter Tailstock Chip conveyor Iisdpez I Ryljfx Am Dsh Video available!

Condition: excellent (used), Year of construction: 2022, operating hours: 2,394 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Y axis travel +/-50 mm Z axis travel 355 mm Bar Capacity 44mm C axis 0,01 degrees Spindle Speed 6000 rpm Spindle Nose A2-5 Milling spindle speed 6000 rpm Rapid Feedrates X/Y/Z = 30,5 / 12,7 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Tool holder type VDI30 Weight 3600 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - C Axis programmable - Y Axis - Live tool turret (each places) Iodpswvf Thofx Am Deih - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: excellent (used), Year of construction: 2019, operating hours: 6,300 h, functionality: fully functional, machine/vehicle number: 311539, With a 310 mm diameter chuck with 3-jaw operation Jorgensen conveyor and coolant system Standard technical data Spindle Chuck: 12 inches (305 mm) Bar capacity: 102 mm Spindle nose: A2-8 Maximum speed: 3,200 rpm Power: 40 hp (≈30 kW) Machining capabilities Maximum turning diameter: 533 mm Maximum cutting diameter: 349 mm Maximum turning length: 826 mm Maximum distance between centers: 826 mm Axis travels X: 239 mm Y: ±50.8 mm (total travel 102 mm) Z: 826 mm Turret and powered tools 12-position turret Powered tools Integrated C-axis for milling, drilling, and tapping Ijdozzw Npopfx Am Deih Rapid traverse rates X: 12 m/min Y: 12 m/min Z: 24 m/min Subject to errors and omissions, this data is provided without any commitment.

Condition: excellent (used), Year of construction: 2019, HAAS ST-30 – 2019 – BMT65 / driven tools / C-axis / only 1385 cutting hours For sale: HAAS ST-30 CNC turning center, manufactured in 2019. The machine is in very good technical and visual condition, with very low operating hours – only 1385 hours of actual cutting time. A rich configuration including a BMT65 tool turret, driven tools, and a C-axis allows for not only turning operations but also milling, drilling, and threading without the need to transfer the workpiece to another machine. TECHNICAL DATA * Manufacturer: HAAS Automation * Model: ST-30 * Year of manufacture: 2019 * Date of manufacture: 07/2019 * Control: HAAS CNC * Chuck: 254 mm / 10” * Spindle nose: A2-6 * Maximum spindle speed: 3400 rpm * Spindle power: 22.4 kW / 30 HP * Maximum torque: 407 Nm at 500 rpm * Maximum bar diameter: 76 mm Ijdpoz D E Aysfx Am Doih * Spindle bore diameter: 88.9 mm * Tool turret: BMT65 * Driven tools * C-axis * Hydraulic tailstock * Machine without Y-axis WORKING RANGE * X-axis travel: 324 mm * Z-axis travel: 660 mm * Maximum workpiece diameter above frontrest: 806 mm * Maximum machining diameter with BMT65 turret: 457 mm * Maximum machining length: 660 mm * Maximum bar diameter: 76 mm * Distance between centers: approx. 762 mm EQUIPMENT * BMT65 turret * Driven tools * C-axis * Tool probe * Hydraulic tailstock * High-pressure coolant system * Through-tool coolant * Belt chip conveyor * Mist collector/filtration system * Rigid tapping * Spindle orientation M19 * VPS – Visual Programming System * Wireless network * 1 GB memory * Compensation tables MACHINE HOURS Data read directly from the control: * Power-on time: 13,052 h * Cycle time: 1,764 h * Actual cutting time: only 1,385 h Please send a specific price offer.

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ Iisdpfjxrf Stsx Am Doh STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del