Used Haas Dt 1 for sale (222)

Condition: used, Year of construction: 2010, machine/vehicle number: IntNr231656, HAAS DT-1 CNC machining center – manufactured in 2010 Bsdpfx Abjzwk Iwj Djll For sale is a HAAS DT-1 CNC machining center, manufactured in 2010, equipped with a 3+2-axis system, a Renishaw measuring probe, and a KUKA KR 5 sixx R850 WP. Technical data Manufacturer: Haas Model: DT-1 Year of manufacture: 2010 Machining: 3+2-axis Cycle time: 4,962 h Feed time: 3,079 h CNC control: Haas Chip conveyor: Integrated screw conveyor system Measuring probe: Renishaw Internal cooling (IKZ): present, currently defective Automation – KUKA KR 5 sixx R850 WP, control panel currently defective Dimensions of the robot cell Height: approx. 2,100 mm Width: approx. 1,150 mm Depth: approx. 800 mm Dimensions including infeed and outfeed Height: approx. 2,100 mm Width: approx. 1,150 mm Depth: approx. 2,400 mm The machine can be inspected on-site by appointment. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro Bjdpfx Abszwxz Es Dsll under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, spindle speed (max.): 7,500 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, Haas VF1 Vertical Machining Centre,2011, table 660 x 356mm, trav 508 x 406 x 508mm, bt40, 20atc, 7,500rpm, rigid tapping , Liquid cooled, Chip conveyor Bljdpfx Abszwuryo Dol

Condition: used, Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 508 mm Travel range, Y-axis: 406 mm Travel range, Z-axis: 508 mm Distance, spindle nose to machine table: max. 610 mm Distance, spindle nose to machine table: min. 102 mm Rated power: max. 22.4 kW Torque: max. 122.0 N·m at 2,000 rpm Torque with optional gearbox: max. 339 N·m at 450 rpm Spindle design: metric Spindle taper: SK40 Spindle speed: 15,000 rpm Table length: 660 mm Table width: 356 mm Width of T-slots: 15.90 to 16.00 mm Center distance of T-slots: 125 mm Number of T-slots in standard configuration: 3 Load capacity of the table with uniform distribution: max. 1,361 kg Feed rate during machining: max. 16.5 m/min Rapid traverse, X-axis: 25.4 m/min Rapid traverse, Y-axis: 25.4 m/min Rapid traverse, Z-axis: 25.4 m/min Tool diameter (overall): max. 89 mm Tool weight: max. 5.4 kg Tool-to-tool change time (average): 4.20 s Chip-to-chip change time (average): 4.50 s MACHINE DETAILS Coolant tank capacity: 208 l Input voltage AC, three-phase, low: 220 V AC Full load current, three-phase, low: 70 A Input voltage AC, three-phase, high: 440 V AC Full load current, three-phase, high: 35 A Blodpfxszxhmto Ab Dol Weight: 3539 kg EQUIPMENT Tool changer, 20-position Chip conveyor Internal coolant supply, 21 bar Coolant mist extraction system Additional coolant filter

Condition: used, Haas TM1, Year 02/2009, 4000RPM Spindle. BT40, Bodpfx Aezvrhiob Djll

Condition: ready for operation (used), Year of construction: 2023, operating hours: 208 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, number of axes: 2, Horizontal turning machine manufactured in 2023. This HAAS ST-15 features a maximum spindle speed of 4000 RPM and includes a 12-station bolt-on turret. It comes equipped with a Haas Bar Feeder and a hinged belt chip conveyor for efficient operation. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15 machine we have for sale. Contact us for further details regarding this machine. • Condition: very good • Power on time: 1369:37:08 h • Cycle start time: 373:45:41 h • Feed cutting time: 208:26:21 h • Finished parts counter: 250 • M30 counter 1: 1577 • M30 counter 2: 14238 • Electrical: 440 V, 3-phase, 50/60 Hz • Full load amps: 20 A • Largest load: 18 A • Sub-spindle: not equipped (max speed 0 rpm) • LT-spindle: not equipped (max speed 0 rpm) • Memory: 1 GB Technical Specification Counter Spindle No Bledpfoy R Dh Tex Ab Djl Driven Tools No

Condition: good (used), Year of construction: 2020, Maximum cutting diameter 305mm, maximum machining length 406mm, bar capacity 63.5 mm, Blodpfx Abjzg Edle Del spindle speed 4000 rpm, 20 hp spindle motor, 12 station turret, coolant, and swarf conveyor, 3 jaw chuck, toolsetter,

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 406 mm, spindle motor power: 14,900 W, number of axes: 4, This 4-axis HAAS ST-15Y was manufactured in 2022. It features a maximum spindle speed of 4000 rpm and a spindle power of 14.9 kW. The machine has a workpiece diameter over the bed of 419 mm and a maximum cutting length of 406 mm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15Y horizontal turning machine we have for sale. Contact us for further details. • Capacities • Chuck size: 210 mm • Max part swing: 419 mm • Max cutting diameter (BOT or VDI turret): 305 mm • Max cutting length: 406 mm • Bar capacity: 64 mm • Feedrates (rapid) • X-axis: 12.0 m/min • Y-axis: 12.0 m/min • Z-axis: 30.5 m/min • Axis motors (max thrust) • X-axis: 10,676 N • Y-axis: 10,231 N • Z-axis: 16,458 N • Spindle Bljdpozlr I Isfx Ab Djl • Spindle nose: A2-6 • Spindle bore: 88.9 mm • Max spindle torque: 203 Nm at 500 rpm • Main spindle C-axis • C-axis power: 3.7 kW • Max speed: 60 rpm • Positioning accuracy: ±0.02° • Brake clamp force: 4448 N • Brake diameter: 366 mm • Brake holding torque: 190 Nm • Control: Interpolated motion and positioning • Turret and tooling • Number of turrets: 1 • Number of tool slots: 12 • Tool taper: VDI40 • Rotating tools: Yes • Live tooling speed: 4000 rpm • Turret configuration: 12-position VDI turret • Tailstock • Type: Hydraulic tailstock • Quill travel: 95 mm • Manual body positioning: 508 mm • Thrust range: 623–5027 N • Coolant and air • Coolant capacity: 114 L • Air required: 113 L/min at 6.9 bar • Electrical • Input AC voltage (3-phase high): 440 VAC • Full load amps (3-phase high): 20 A • Full load amps (3-phase low): 40 A • Configuration notes • C-axis: Yes • Y-axis: Yes • Driven tools: Yes • Counter spindle: No • Power-on hours: 4,500 h Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, chuck outer diameter: 160 mm, Delivered new in 2023 . pictures show covers off while being serviced- showing as new condition inside. High spec machine as new. Tool setter swarf conveyor Tailstock Parts catcher Bsdsx U D Etepfx Ab Dell Tooling as show. ONLY 600 CUTTING HOURS, NEAR NEW CONDITION Omega Design solutions run over 20 Haas machines and can help with all aspects of getting this machine up and running on you parts.

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Bledpfsxrf Stex Ab Djl Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: refurbished (used), Year of construction: 2003, operating hours: 15,000 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 534 mm, feed length X-axis: 762 mm, feed length Y-axis: 305 mm, feed length Z-axis: 534 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) Bljdpsyanlajfx Ab Djl - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 33515 - Manufacturing date: 12/03 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 305 mm - Z-axis travel: 534 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 636 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Haas TM 1 HE vertical milling machine, year of manufacture 2007, Haas CNC control, travel in X/Y/Z 762/305/534 mm, table size 1213 x 267 mm, spindle speed up to 4,000 rpm, spindle taper BT 40. Bsdjzh Unpjpfx Ab Dell

Condition: ready for operation (used), functionality: fully functional, HAAS UHS / Manual Hand Lever Surface Grinder Blsdpjzu Nphsfx Ab Djl - Grinding length approx. 350mm - Grinding width approx. 180mm - Grinding height approx. 250mm - Grinding movement controlled manually via lever - Swiveling range (horizontal) 360 degrees - Tilting range (vertical) +15 to -20 degrees - General angular adjustment - Spindle speeds 2500 / 5600 RPM - Drive power 1.1 kW Dimensions: L x W x H 1.2 x 1 x 1.7 meters / Weight 750 kg Subject to errors and omissions.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 3094252, SPECIFICATION Swing over front apron 641mm Swing over cross slide 413mm Maximum cutting diameter 356mm Maximum cutting length 356mm Spindle nose A2-5 Spindle bore 58.7mm Bljdpfxozubxns Ab Del Bar capacity 44mm Maximum spindle speed 6000rpm Spindle motor power 11.2kW Number of turret tool stations 12 |Rapid traverse Z/X axis 30.5m/min Approximate weight 2500Kg MACHINE EQUIPPED WITH: - Haas CNC Control system 3 jaw chuck 165mm diameter Parts catcher Hydraulic tailstock Tool presetter Interlocked guarding Automatic lubrication system Coolant system

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, controller manufacturer: Haas, overall weight: 3,250 kg, spindle speed (max.): 7,500 rpm, number of spindles: 1, number of slots in tool magazine: 20, Equipment: documentation/manual, 3-axis machining center Manufacturer: Haas Type: VF-1 / VCE-500 Year of manufacture: 09-1998 Control: Haas (retrofit) Operating hours: unknown S/N: 16XXX Technical data: ----- - Table size: 660 x 356 mm - Travel ranges X-Y-Z: 508 x 406 x 508 mm - Spindle: max. 7,500 rpm - Spindle power: 11 kW - Tool holder: SK40 - Tool magazine with 20 stations - Coolant system - Programmable coolant nozzle - Chip conveyor Bledpfszu Stvsx Ab Dol - Footprint L x W x H: 2.60 x 2.30 x 2.50 m - Weight: approx. 3.2 t Accessories: ----- - Documentation - SK-40 holder set Special features: ----- - Retrofitted with newer Haas control! - In excellent condition.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1162068, SPECIFICATION Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger High speed machining Blodpfx Abozr H Tls Del Co-ordinate rotation and scaling Rigid tapping 5 off BT40 toolholders Filtermist extraction system Programmable coolant nozzle Lighting Guarding

Condition: excellent (used), Year of construction: 2019, operating hours: 5,045 h, functionality: fully functional, machine/vehicle number: 3116946, turning diameter over cross slide: 279 mm, turning length: 406 mm, turning diameter: 279 mm, spindle bore: 64 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 406 mm, spindle motor power: 15 W, rotational speed (min.): 4,000 rpm, rotational speed (max.): 6,000 rpm, total height: 2,167 mm, total length: 3,395 mm, total width: 1,612 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 30 m/min, workpiece weight (max.): 3,583 kg, type of input current: three-phase, overall weight: 3,583 kg, spindle nose: -, Equipment: documentation/manual, Used turning center for sale – CNC lathe with Y-axis and driven tools, in very good condition. Contact us for further details. Model: HAAS ST-15Y Year of manufacture: 2019 Maximum turning diameter: 305 mm Bodpfx Ajzr E H Dsb Doll Reblezr E H Djvzwyrecf Maximum turning length: 406 mm Y-axis travel: 102 mm Bar capacity: 64 mm Chuck size: 8 inches Maximum spindle speed: 4000 rpm Number of controlled axes: 4 Spindle motor power: 14.9 kW Tool size: BOT 6/12 VDI40 Controls: HAAS 2019 Voltage: 440V AC Weight: 3583 kg Dimensions (L x W x H): 3030 x 1550 x 1810 mm Additional Equipment: VPS Programming System, Hydraulic Tailstock, HAAS Auto-door, Chip conveyor, 6000 rpm Live Tools Resale capability included. The center is in very good condition. It is currently in continuous operation and connected to power. The machine operated in one shift.

Condition: used, Haas St 10, 6.5" Diameter 3 Jaw Chuck, Serial No 3092094, Year 05/2015, Complete with Multifeed MX-1B Bar Feed Unit, Note no tailstock. Specifications: Swing: 25.25" Machining Length: 16.5" Bjdpfx Aszvrd Rjb Dell Chuck Size: 6.5" Bar Capacity: 1.75" Power: 15 hp Max RPM: 6,000 RPM Turning Dia: 14"

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, This is the Haas equivalent of the Fanuc Robodrill and very impressive it is! Shown running on our race car components, we can help with training and setup if required pictures show components we are currently making on the DM2 Bsdpfx Abjydil No Dsll 5th Axis enabled 4th axis Interface, 5th axis Interface, Coolant, Interlocked guards, High speed machining enabled Low Volt Light, Programmable Coolant Nozzle, Remote Hand Wheel, Swarf Auger, Through Spindle Coolant, USB Port Control HAAS Machine Dimensions 2811 x 2463 x 2583mm Machine Weight 2427kg Max & Min distance from table to spindle 152 - 546mm Maximum Cutting Feedrate 30.5m/minute Maximum Tapping Capacity M12 (Aluminium) Maximum Tool Diameter 64mm Maximum Tool Diameter with Empty Adjacent Pockets 64mm Maximum Tool Length 178mm Maximum workpiece weight 113kg Memory 1Gb Rapid Feedrates 61m/minute Spindle Motor Power 40HP Spindle Speed 15000rpm T- Slots 3 x 16mm Table Size 864 x 381mm Tool Change Capacity 18 + 1 Tool Change Time (Chip to Chip) 1.6 seconds Tool Size BT40 Traverses XYZ 711 x 406 x 394mm

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table width: 1,270 mm, table length: 1,400 mm, table load: 4,535 kg, overall weight: 20,800 kg, spindle speed (max.): 7,500 rpm, CNC Haas with 15-inch LCD screen Table size: 1400x1270 mm Bodpfx Abjypv T Ro Djll Maximum table load: 4,535 kg Spindle ISO 50, power 22.4 kW Maximum spindle speed: 7,500 rpm Travels: 1626x1270x813 mm 50-position tool changer Chip conveyor Weight: 20,800 kg

Condition: used, Year of construction: 2023, operating hours: 120 h, Almost like new, a Haas TRT210 two-axis rotary table with only approximately 120 operating hours. The table was used exclusively on a Haas VF-4 (see separate listing) and is in flawless optical and technical condition. The TRT210 is Haas’s compact 5-axis solution for medium-sized VMCs, and it takes up minimal space by being mounted at one end of the machine table – the rest of the mounting surface remains free for vises or other fixtures. Plug-and-play connection to any Haas milling machine with 4/5-axis drives and the corresponding NGC control software. In addition to the rotary table itself, the scope of supply includes the matching toe clamp kit for direct mounting on the machine table, as well as a Renishaw riser block for side mounting of the radio receiver (OMI/OMP) – this ensures reliable signal transmission to the measuring probe even over the full A-axis swivel range. Inspection possible by appointment. Shipping can be arranged. Technical data: - Table diameter: 230 mm (9.10") - Max. pitch circle: 368 mm (14.5") - Max. workpiece weight on table: up to approx. 90 kg - Hole pattern: 2× 6-hole pattern A-axis (swiveling): - Swivel range: ±120° - Max. speed: 80°/s - Max. torque: approx. 407 Nm (300 ft-lb) - Braking torque at 6.9 bar: approx. 540 Nm - Accuracy: ±25 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° Blsdpfxoy Tp Hgo Ab Dol B-axis (rotating): - Rotation range: 360°/continuous - Max. speed: 100°/s - Max. torque: approx. 285 Nm (210 ft-lb) - Braking torque at 6.9 bar: approx. 270 Nm - Maximum runout: 0.013 mm (0.0005") - Accuracy: ±15 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° General: - Connection voltage: 115 VAC, approx. 15 A - Compressed air max.: approx. 10 bar (150 psi) - Weight: approx. 220 kg Scope of supply: - Haas TRT210 rotary table complete - Original Haas servo connection cable for A and B axes - Toe clamp kit (for mounting on the machine table) - Renishaw riser block for side receiver mounting - Original documentation

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Haas TM1 4 K SPINDLE TRAVELS X 762 MM Y 305 MM Z 406MM This machine has the option to run on 240v single phase 2003 machine in good condition Rigid tapping Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines. We find the TM1 to be a very capable machine with market leading reliability. The machine uses Industry standard BT40 tooling. Bedpfx Ajyfn Iljb Dell The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles. The control interfaces well with CAD-CAM,we will help with setup if required. This machine would make an ideal entry level machine but at the same time is great for quantity production of precision cnc machined parts The machine has been checked by qualified engineers and is ready for work. We use the machine for occasional toolmaking so we can demonstrate if required. The machine is 2.7m high with the head up and 2.2 with it down.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 3,048 mm, feed length Y-axis: 813 mm, feed length Z-axis: 762 mm, controller model: NGC, spindle speed (max.): 7,500 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, 50-taper spindle with a 2-speed gearbox. Customizable to meet your specific requirements. Bsdpfx Abjzr U S Ne Djll Ideal for working with tougher materials and larger-diameter cutting tools.

Condition: ready for operation (used), Year of construction: 2018, table load: 227 kg, number of axes: 5, This 5-axis HAAS TR-310 was manufactured in 2018. It features a table diameter of 310 mm, a maximum part swing of 787 mm, and can handle loads up to 227 kg. With a maximum rotation speed of 50°/sec and travel range of ±120°, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the HAAS TR-310 machine we have for sale. Contact us for more information about this machine. • Condition: Brand new, never used • Table diameter: 310 mm • Max part swing: 787 mm • Standard T-slots: 6 @ 60° • Max rotation speed: 50°/secB Axis (Tilting) • Backlash: 30 arc-sec • Ratio: 3:1 • Max speed: 50°/sec • Max runout: 0.025 mm • Travel range: ±120° • Resolution: 0.001°A Axis (Rotary) • Accuracy: ±15 arc-sec • Repeatability: 10 arc-sec • Max rotation: 999.999° (with rotary control) • Resolution: 0.001° Bledex D I H Rjpfx Ab Dol

Condition: excellent (used), Year of construction: 2020, operating hours: 7,320 h, machine/vehicle number: 3119208, turning length: 406 mm, turning diameter: 305 mm, spindle motor power: 14,900 W, spindle speed (max.): 4,000 rpm, spindle bore: 64 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, For sale: Used CNC lathe HAAS ST15 in very good technical condition. Operating hours: 7,320. Reason for sale: Standardization of machinery for compatibility with the rest of the machine park. Key features: • Automatic Door • Renishaw WIPS Probing System • Hybrid BOT/BMT Turret (Dual Mount Tooling) • Live Tooling (Driven Tools – milling option) • Sub-Spindle (6,000 RPM) • Parts Catcher (if installed) • Chip Conveyor • Control Cabinet Cooler Blodoy A I Nxepfx Ab Dsl • Wireless Networking (WiFi) • Rigid Tapping • Extended Program Memory (1GB) • VPS Programming (Visual Programming System) For more information, please contact us by phone or email.