Used Ham Mold for sale (2,959)

Condition: good (used), Year of construction: 2002, functionality: fully functional, Clamping force: 500 kN Platen size: 540 x 540 mm Tool opening stroke: 350 mm Minimum tool mounting height: 200 mm Screw diameter: 30 mm Injection pressure: 2025 bar Displacement volume: 74 cm³ Opening width: 500 mm Ejector stroke: 100 mm Total weight: approx. 2,300 kg Kedpozg T I Sofx Afwena

Condition: excellent (used), Year of construction: 2003, operating hours: 62,490 h, functionality: fully functional, clamping force: 160 kN, screw diameter: 45 mm, injection weight: 330 g, The Negri Bossi 160T in very good condition have full service history from Negri Bossi distance between tie bars 510X450 . Robot interface and two Hydraulic cores . Ksdpfezd U Dijx Afwsna

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Knedpfx Afeyrczgewja Serial number: 161729 Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Control circuit voltage: 24 V = Total rated current: 96.00 A Total connected load: 55.0 kW Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 105,386 h, functionality: unexamined, machine/vehicle number: 30131, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 20,000 kg, Equipment: documentation/manual, A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. Kedpfxjzmrf No Afwena The machine has not been inspected but was operational until the end. A linear robot is included, but it has never been used and was probably not programmed.

Condition: excellent (used), Year of construction: 2005, KM 500/2700C2 Technical Specifications Kedpfozgwbvsx Afwena Clamping Side: Clamping Force: 5000 kN Tie Bar Dimensions (H x V): 900 x 800 mm Minimum Installation Height: 480 mm Maximum Platen Distance: 1650 mm Centering: 200 mm Mold Weight: 7900 kg Injection Side: Screw Diameter: 80 mm Displacement: 1433 cc Injection Pressure: 1829 bar Equipment: MC 4 Control System Core Pulls: 2+2 Machine is sold without robots and peripherals!

Condition: excellent (used), Year of construction: 2007, Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of manufacture: 2007 Control system: MC 4 Kjdpozgwbcefx Afwjna Clamping Unit: Clamping force: 650 t Opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum platen daylight: 1,750 mm Tie bar spacing (h x v): 1,100 x 900 mm Platen dimensions (h x v): 1,510 x 1,370 mm Centering (nozzle-ejector plate): 200 / 200 mm 1st Injection Unit: Screw diameter: 80 mm Maximum shot weight in PS: 1,400 g Shot volume: 1,543 cm³ Injection pressure: 2,205 bar 2nd Injection Unit: Screw diameter: 45 mm Shot weight in polystyrene: 278 g Shot volume: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x air valves 16-fold cascade 3 x core pullers on moving platen 3 x core pullers on fixed platen 20 x hot runner controllers Robot interface: Euromap 67 Dimensions: Total weight: 34,500 kg Overall size (L x W x H): 7.8 x 2.5 x 2.5 m Operating hours: 45,400 h Machine can also be operated as a single-component machine (1K).

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, KM 500-3500 C2 Year of manufacture: 2007 Operating hours in automatic mode: 60,000 h Clamping unit Clamping force: 5,000 kN Mounting plate dimensions: 1270 x 1310 mm Distance between tie bars: 900 x 800 mm Min./max. mold height: min. 480 mm Maximum opening stroke: 1,650 mm Injection unit Ksdpfx Afozgwa Eewsna Screw diameter: 80 mm Injection volume: 1,543 cm³ Shot weight: 1,404 g Injection pressure: 2,205 bar Electrical and hydraulic equipment Nominal pump motor power: 90 kW Heating capacity: 44 kW Dimensions and weight Net weight with control cabinet: 27,090 kg Dimensions (L x W x H): 7.65 m x 2.55 m x 2.55 m

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters Knsdox Sqi Hepfx Afwoa GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Control SELOGICA mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm total power requirement 96 kW weight of the machine ca. 17 t dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Knodpfsvkqfajx Afwsa Operating hours: 42878h

Condition: used, Arburg unscrewing unit Model: 118044 Machine number: 12915769 Year of manufacture: 2010 Knsdozpzh Sopfx Afwoa Condition: used Functionality: fully functional Description The used unscrewing unit (2 directions, for 270C / 370C) from Arburg is used to automatically demold plastic parts with internal or external threads from the injection molding tool by precisely unscrewing the thread core during or after the opening process. Medium size Dimensions: 150x250x400 mm Weight: 30 kg

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection Kodjzma Avjpfx Afwjna

Condition: excellent (used), Ice cream press, shaper, spaghetti ice cream press, ice cream press cup -made of stainless steel tube: Ø 79 mm -Shape: Spaghetti 44 pieces available -Holes: Ø 3 mm -Shape: wide pasta, tagliatelle, lasagne, 24 pieces available -Slot: 4 x 49 mm -Price per piece -External dimensions: 160/79/H78 mm -Weight: 0.45kg Knsdpec H S D Ijfx Afwoa

Condition: excellent (used), Wittmann Battenfeld Type: SmartPower 210 Wittmann Battenfeld injection molding machine with UNILOG B8 control For use with thermoset materials Current software version: IO4.26 The machine was serviced/inspected and brought up to the most current possible standard by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in 2026. In addition to the pressure switches already present, the machine can be equipped with two additional mold internal pressure switches (Kistler module for mold internal pressure switching, range 1: 20,000 pC, range 2: 10,000 pC). The parts for the mold internal pressure switch upgrade are included in the scope of supply. Injection molding machine: Knedpfjzdywnjx Afwoa Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: 137949-100 Machine weight, gross/net Main dimensions of the machine Noise level (DIN EN ISO 3744-46): 65 dB(A) Ambient temperature: +15 - +40°C (+59 - +104°F) Year of manufacture: 2017 Operating hours: 1437 hours Hydraulic system: Hydraulic oil, tank capacity Oil temperature min / max. (HLP 32): min 30°C (86°F) / max. 40°C (104°F) Oil temperature min / max. (HLP 46): min 40°C (104°F) / max. 50°C (122°F) Switching temperature for oil cooling (HLP 32): 35°C (95°F) Switching temperature for oil cooling (HLP 46): 45°C (113°F) Electrical system: Drive power, hydraulic pump: 37kW Motor voltage Frequency Water system: Oil cooler: Cooling water consumption: approx. 0.5 - 1.5 m³ / h (0.65 - 1.96 cu yd) Cooling water inlet max. 35°C (95°F), NW ⅜" Cooling water battery: Cooling water inlet ∅ ¾", max. 10 bar (max. 145 psi) Cooling water outlet ∅ ¾" Number of heating zones including nozzle: 5 Closing unit: SmartPower 210 Clamping force: 2100kN Type: SmartPower 210 Condition: used Scope of supply: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Knodpfszt I Srox Afwoa Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Injection unit 410 Knsdpfx Afozt I Rnjwsa Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve - Euromap 67 connector

Condition: good (used), Year of construction: 2001, screw diameter: 30 mm, clearance between the columns: 420 mm, injection pressure: 1,995 bar, injection weight: 96 g, mold height (min.): 200 mm, General information: Year of manufacture: 2001 Control system: NC4 Weight: 3950 kg Dimensions (length × width × height): 4.2 × 1.4 × 2.0 m Injection unit: Type: … / 200 Screw diameter: 30 mm Screw L/D ratio: 20 Specific injection pressure: 1995 bar Knjdpfx Ajzt Ivdjfwsa Injection volume: 106 cm³ Injection shot weight: 94 g Clamping unit: Type: 60 / … Clamping force: 60 t Platen dimensions: 600 × 600 mm Distance between tie bars: 420 × 420 mm Mold height: 200 mm Opening stroke: 550 mm Maximum platen distance: 750 mm

Condition: excellent (used), Year of construction: 2007, clamping force: 350 kN, screw diameter: 22 mm, clearance between the columns: 280 mm, injection pressure: 2,061 bar, injection weight: 37 g, ejector stroke: 100 mm, Clamping force: 35t Year of manufacture: 2007 Injection weight: 37g Injection unit 80 Knodpfx Afezt Itcewea Screw diameter: 22 mm Specific injection pressure: 2061 bar Injection volume: 42 ccm Injection weight: 37 g Screw L/D ratio: 20 Tool closing system 35 Clamping force: 35 t Tool plate dimensions: 390x390 mm Distance between columns: 280x280 mm Ejector force: 26 kN Ejector stroke: 100 mm Weight: 2200 kg Control system: MC4 Equipment: - Hydraulic core - Pneumatic valve

Condition: good (used), Year of construction: 2007, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 370 mm, injection pressure: 1,390 bar, injection weight: 168 g, mold height (min.): 250 mm, ejector stroke: 150 mm, Clamping force: 80 t Year of manufacture: 2007 Injection unit: 250 Screw diameter: 40 mm Specific injection pressure: 1390 bar Injection volume: 185 ccm Tool closing system: 800 Clamping force: 80 t Distance between columns: 370 x 370 mm Ksdszt In Tjpfx Afwona Ejector force: 40 kN Tool height: 250 mm Opening stroke: 440 mm Ejector stroke: 150 mm Weight: 3180 kg Control system: Selogica Equipment: 2 x hydraulic core 5 heating zones for the mold Rotameter

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Ksdpfx Afjzump Eowjna Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Condition: good (used), Year of construction: 2000, clamping force: 1,600 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, Basic data Clamping force: 160 t Year of manufacture: 2000 Control system: Selogica Injection weight: 154.7 g Injection unit .../675 Screw diameter: 35 mm Knodpfxszt Ikbe Afwja Injection volume: 170 cm³ Injection weight: 154.7 g Mold clamping unit 160/... Clamping force: 160 t Mold plate dimensions: 728 × 728 mm Distance between columns: 520 × 520 mm Mold height: 250 mm Opening stroke: 650 mm Maximum mold plate distance: 900 mm Ejector force: 50 kN Ejector stroke: 175 mm

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Kjdjzt Ih Tepfx Afwena Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Year of construction: 1999, condition: excellent (used), INJECTION MOLDING MACHINE KRAUSS-MAFFAI 150-700 C1 Year of manufacture: 1999 Kedpfeh S Dncox Afwena Screw diameter: 55 mm In excellent condition, still in operation.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, For sale is an injection moulding machine from the manufacturer Arburg, model 520 C 2000-800, year of manufacture 02/2006. The machine is in a very good, well-maintained condition. An on-site inspection is possible at any time by prior telephone arrangement. Kodpfxsw Hpwrj Afwsna

Condition: ready for operation (used), Year of construction: 1997, operating hours: 113,881 h, functionality: unexamined, machine/vehicle number: 32833, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 11,500 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. Knedpjzl S Rpsfx Afwoa The machine has not been inspected but was in working order until the end.

Condition: excellent (used), Year of construction: 2013, operating hours: 46,500 h, functionality: fully functional, clamping force: 130 kN, screw diameter: 37 mm, The Negri Bossi will looked after did low hours . The machine have full service history year of manufacture 2013 the machine have one single hydraulic core and on air eject Kjdpjzcx Tmofx Afwsna