Used Headstock for sale (376)

Condition: used, spindle diameter 125 mm spindle travel 1130 mm column travel 6000 mm Dsdpsyuqc Rofx Ag Rskk headstock travel cross 1700 mm column travel on cross-slide 400 mm spindle speeds 2,24 - 450 (27x) U/min volt 380 V total power requirement 14 kW Facing head D.R.O.

Condition: used, Year of construction: 1997, Technical details: spindle diameter: 180 mm x-travel: 6.000 mm y-travel: 2.900 mm total power requirement: 95 kW weight of the machine ca.: 130 mit Zubehör t z-travel: 1.250 Ram mm w-axis: 1000 Spindel mm ram stroke: 1250 mm dimension of the ram: 450 x 450 mm bore spindle stroke: 1000 mm bore spindle turning speed range: 920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table: 3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter: Index 4x 90° -360000 Winkel =0,001 Grad mm Dkedporu Rfhofx Ag Rok travel - cross: Längs 1230 mm table load of rotary table max.: 40 Tonnen clamping plate: 3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored The headstock sliding guides were recoated and scraped. *

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Dkedpoynky Asfx Ag Rjk Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: ready for operation (used), Year of construction: 2006, bar diameter (max.): 10 mm, controller manufacturer: FANUC, controller model: 16i-TB, number of axes: 9, Swiss type turning machine manufactured in 2006. This TORNOS DECO 10a features an automatic and integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It includes a Robobar SSF 3m loading magazine and is equipped with a FANUC 16i-TB control system. If you are looking to get high-quality turning capabilities, consider the TORNOS DECO 10a machine we have for sale. Contact us for further details. • Overhauled in 2016: • Checked machine, ball screws (replaced if necessary), guides, guide bushing, main and counter spindles • Complete cleaning • Maintenance carried out in accordance with Block 3 • Replacement of all drive belts • Barriers, relays, filter mats replaced • Reference points adjusted • Configuration/features: • Moving headstock • Directed spindle stop (S1) • Independent counter spindle (S4) • 9 axes with C1 and C4 and Transmit • 1 cross slide with 4 tool holders • Sensor for tool breakage detection Additional equipment • Automatic and integrated bar loader (oil bath) TORNOS-BECHLER Type SSF-210, equipped with Robobar SSF 3 m loading magazine • Max. bar length: 3.2 m • Bar capacity: min. 2 mm, max. 10 mm • Max. diameter without bar preparation: 8 mm (without clamp) • “HYBRIDE 10+5” drum with: • 14 guide holes for 1–4 mm • 14 guide holes for 4.1–10 mm • Loading magazine with drum • Integrated 25 L hydraulic unit with filter • Front/rear support foot, center height 1100 mm Dkedpfsytcaljx Ag Rsk • Electrical control box (diagram 112.20.300) • Motor voltage 400 V, control voltage 24 V • Color: Anthracite RAL 7016 / Gray RAL 7035 Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2000, bar diameter (max.): 7 mm, number of axes: 9, Swiss type turning machine manufactured in 2000. This TORNOS Deco 10a features a movable headstock, independent counter spindle, and a pivoting workpiece holder. It includes a loading magazine with a drum and a lubrication device for guide bushing. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 10a machine we have for sale. Contact us for further details. • Movable headstock • Directional spindle stop S1 • Cross slide with 4 tool holders T11–T24 with vertical and horizontal movement • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Motorization S2 • Integrated 25-liter hydraulic unit with filter • Electrical control box • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12,000 rpm Additional equipment • Loading magazine with drum (bar feeder) • “HYBRIDE 10+5” drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars (no bar preparation up to 8 mm) • 3 pre-settable turning tool holders • 4 fixed tool holders • Tapping attachment for collet chuck ESX 12 • Front/rear support foot, center height 1100 mm Dksdpfeyr Nfljx Ag Rjk Technical Specification Counter Spindle No

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding length: 900 mm, TECHNICAL DETAILS Maximum grinding length: 900 mm Distance between centers: 600 mm Height of centers (standard): 125 mm Dodpjytf Tbofx Ag Rjkk Height of centers with raised headstock and tailstock blocks: 175 - 250 mm Maximum swing diameter with riser blocks: 350 - 500 mm Table swivel / each side: 10° Table reversal dwell time: 0 - 5 s Diameter / width / bore: 250 x 13 x 76 mm Grinding wheel spindle speeds: 360 rpm Cross movement of grinding wheel head: 285 mm Rapid infeed and retraction of wheel head: 40 mm Intermittent feed per table reversal: 0.001 - 0.03 mm Micro-adjustment of feed, 1 division on dial: 0.001 mm Continuously variable working speeds (normal / special): 20 - 400 / 10 - 400 rpm MACHINE DETAILS Control type: Conventional

Condition: good (used), Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 200 mm, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 Dkodpfxsyx T Ifj Ag Rok - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged.

Condition: good (used), Year of construction: 2005, EMCOTURN 345/II TCM "BAR": 2-axis CNC lathe, 13 kW drive power, 60-6300 rpm at the main spindle, linear guideway system, digital drive system, includes: * 12-position VDI 30 axial turret with directional logic, for up to 6 driven tools, torque 16 Nm, speed range 0-5000 rpm * C-axis * Mechanical spindle brake * TRANSMIT software for easy C-axis programming * Tailstock with quill: Dedpfjyu Un Rjx Ag Rekk - Quill diameter: 60 mm - Quill stroke: 120 mm - Morse taper MK4 - Max. quill force: 5000N * Headstock size 45 with spindle nose KK5 (DIN 55026) * Hollow clamping cylinder including draw tube * EMCO standard bar feeder interface * Coolant pump 3 bar * Fanuc 21i * Machine light for work area * Hydraulic unit * Interface for foot switch and chip conveyor * Swivel-mounted measuring equipment tray * Integrated step-down transformer for 3x230, 3x400, or 3x480 Volt - 50/60 Hz * Documentation Year of manufacture: 2005 Machine No.: R2AT3551

Condition: used, Year of construction: 1994, functionality: fully functional, throat depth: 1,250 mm, Radial drilling machine Fab. Breda type. R 55-1250 Year of manufacture 1994 Technical details Make: BREDA Type: R 55-1250 Throat: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Tapping capacity in steel: M 50 Tapping capacity in cast iron: M 65 Drill spindle mount: MT 5 Throat: 1250 mm Cross travel of headstock: 930 mm Minimum/largest distance from base plate: 5360 – 1375 mm Vertical travel of the boom: 705 mm Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speeds: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate 2070 x 910 mm Clamping area base plate 1325 x 910 mm Motor power 4.4 kW - 380 volts Dimensions (L x W x H) 2.1 x 1.0 x 2.5 m Weight 3 t Dkedpsv Rpf Sofx Ag Rsk Accessories Drilling table 750 x 600 x 550 mm Cooling Hydraulic clamping All information is subject to change. A demonstration is available at any time in our showroom.

Condition: used, Year of construction: 1995, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Dodpfjxyadajx Ag Rokk Completely overhauled in 2013 Heavy duty workpiece headstock tailstock Without chuck and without bezel in the photo Kelco 90 control The machine can be viewed in operation at the customer's premises from 2025 up to and including January 2026.

Condition: used, Year of construction: 2003, internal diameter 99999 mm grinding depth 99999 mm swing diameter 99999 mm grinding diameter 99999 mm grinding length 200 mm centre height 175 mm CNC internal grinding machine B-axis 4 x 90° Q-axis for adjusting tapers Used with minor maintenance 2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm 1 external grinding motor spindle Fischer MFVS1407 7,000 rpm -Pneumatic power clamping device with 20mm stroke -Dressing device with 2 swivelling arms, hydraulically foldable back -Grinding detection ring sensor Dittel on the workpiece headstock -Passive grinding detection with magnetic base Djdpfsuxft Sjx Ag Rekk -Paper belt filter 375 l

Condition: used, Year of construction: 2000, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Photo of machine already delivered in similar scope: -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Dkedpfx Agjxzk Nis Rjk Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm 500mm grinding wheel diameter New servomotors in x and for the workhead. Photo of already delivered machine in UR equipment. Djdpfsuwv Idjx Ag Rekk -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for training. -Diagnostic function with display of PLC information and digital I/O -Dressing function can be extended or changed at the customer's request. -Oriented spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Rotary encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -Increase of the center height to max. 225mm -Speed control for the grinding spindle Translated with (free version)

Condition: used, grinding diameter 350 mm grinding length 600 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-9,99 mm/Ø 0-9,99 mm/Ø ±10 ° longitudinal feed of the table 1100 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of already delivered machine in centre distance 1000mm. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Djdpfx Aouxft Esg Rokk Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-40 mm/Ø 0-40 mm/Ø ±6,5 ° longitudinal feed of the table 1530 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of machine already delivered with special options -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. Dkodpfx Agouxftro Rjk -Measuring control

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm weight of the machine ca. 3 t High-End Kellenberger 1500U Ideal for spindle producer or overhauler -BEMA Internal grinding device with separate, cooled motor. Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when it is in position. A quantum leap in safety -Infinitely variable grinding spindle speed 1000-1500 rpm -Infinitely variable internal grinding spindle speed 0-100%. -Digital display of grinding spindle speeds -Swivelling angle display top table -swivel angle display grinding headstock Dodpfst Ii Rrjx Ag Rokk -Marposs gaper sensor for external grinding only -fluid gating sensor Marposs internal grinding -Center height up to 250mm possible Machine is already delivered. Identical machine can be built with additional with additional options. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, grinding diameter 250,350,450 mm grinding length 1000 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±8 ° longitudinal feed of the table 1300 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 4,2 x 2,0 m Dsdpfxsv I Eq Sj Ag Rokk Ready for delivery, with 12 month warranty in germany and neighbouring countries! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! -Digital display in 2 axes. Resolution x-axis 0.5my -Modern workpiece headstock with cone MK5 -Modern tailstock with cone MK3 -Modern hydraulic unit -Paper belt filter Further accessories on request

Condition: used, Year of construction: 2010, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Fanuc 310is Completely machanically overhauled with grinding process and setup of one part. Original photo taken on the EMO 2010. CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Dkodpfx Ajvdk N Ejg Rsk Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movomatic ESZ 400 or Marposs P7 ME measuring controls Preparation for external filters Cooling lubricant switch-off for table devices Full casing emulsion Emulsion sanding mist extraction system Maintenance unit for additional pneumatic functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for arobo bezel

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding Dkedpfxjuxfucj Ag Rek - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: used, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-9,99 mm/Ø Djdpfxjuxfupo Ag Rokk 0-9,99 mm/Ø ±8 ° longitudinal feed of the table 1100 mm table speeds 0,02-6 m/min 130 kg cross travel max. 270 mm 130 inkl. Spannung kg 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of already delivered machine in centre distance 1000mm. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: ready for operation (used), Year of construction: 2006, controller manufacturer: FANUC, controller model: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine. Dedpfx Agsx D Dlie Rekk 2 similar machines available! Additional information • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Max diameter without preparation: 8 mm (without clamp) • Motor voltage: 400 V • Control voltage: 24 V • Independent counter spindle (S4) • FANUC 16i-TB control system • 1 cross slide with 4 tool holders • Sensor for tool breakage detection • Center height: 1100 mm • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine • Front/rear support foot • "HYBRIDE 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control box • Integrated 25-liter hydraulic unit with filter • Moving headstock • Directed spindle stopOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 630 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 450 mm, controller manufacturer: SIEMENS, controller model: 840D solution line, number of axes: 3, This 4-axis CHIRON DZ18W was manufactured in 2018. Ideal for precision vertical machining, this model offers robust construction and reliable performance. Consider the opportunity to buy this CHIRON DZ18W vertical machining centre. Contact us for more information. Additional equipment • OPTIONAL: robot, entire cell including conveyor belts, PLC, turning station Machine Benefits Technical Machine Benefits • Tool positions: 2x35 • Tool length max: 380 mm Extra Information Splash guard panel with fully enclosed work area/ with loading door, electrically protected/ including replaceable safety windows/ Dkjdpfx Asx D Nmfsg Rjk Work area partition with stainless steel louvres/ Height 2340 mm above floor, including machine light/ Mini control panel with start and reset button for M61/M62 pallet organization/ Integrated workpiece changing device IWW 0/180°/ for optimal chip flow with center partition made of sheet steel/ Workpiece changing time approx. 3.5 seconds, weight-dependent, self-regulating/ thanks to self-learning speed control./ Transport load per side 0 - max. 250 kg/ Max. 120 kg weight difference between the two table sides./ Each table side is prepared for the installation of a rotary table package./ Distance between spindle mount and swivel center/point /WW minimum 75 mm/ Travel paths: X-axis 630 mm/ Y-axis 530 mm/ Z-axis 450 mm/ Tank flushing system with coolant connection/ NC rotary table, type ATU 200/ Integrated into the integrated workpiece changing device IWW 0/180°/ With hydraulic clamping, holding torque 1,200 Nm,/ Repeatability +5" with/ faceplate © 225 mm, with centering® 60 -0.008,/ Counter bearing with hydraulic clamping, holding torque 800 Nm./ On the rotary table and counter bearing side. Swivel radius 285 mm/ 7th or 5th NC axis, plug-in ready/ Regulated pneumatic connection for sealing air/ Controlled hydraulic connection for clamping./ Rotary feedthrough 2 x 5-way/ Rotary table side: 4 x hydraulic/pneumatic, 1 x Pneumatics/ 4 x hydraulic/pneumatic on the counter bearing side, 1 x pneumatic/ Working area - rotary table assignment/ AF1 Rotary table ATU 200/ AF2 Rotary table ATU 200/ Double-spindle headstock/ Prepared to accommodate 2 main spindle motors with spindles/ Spindle distance in X-axis 400 mm/ Main spindle drive with 2 AC motors/ Air-operated, with tool clamp monitoring/ 11.0 kW at 100% duty cycle/ 25.3 kW at 15% duty cycle/ Speed up to 12,000 rpm/ Max. torque 140 Nm/ Drilling capacity 2 x 42 mm/ in steel E355/ Automatic tool changer/ with robust, fully encapsulated pick-up chain magazine/ 2 x 35 tool positions/ HSK-A 63 DIN tool shank 69893/ Tool width max. 78 mm/ Tool width with free adjacent positions max. 140 mm/ Tool length max. 380 mm/ Tool weight max. 8.0 kg (max. magazine load 240 kg)/ Tool change time approx. 0.9 s (control system dependent)/ Soan-to-chip time approx. 2.2 s (control system dependent)/ Feed drive for X, Y, and Z axes/ Digital drives with direct position measuring systems, overpressure application/ Rapid traverse speed 75 - 75 - 75 m/min/ Axis acceleration 1.0 - 1.4 - 1.6 g/ SIEMENS CNC control 840D solution line/ incl. 10.4" TFT color screen / full keyboard / operator panel OP010S/ 1280 1 (TCU / NCU 720.3, 1 channel)/ User interface Operate/ NC RAM 3 MB (max. 1 MB available)/ (max. 200 programs available)/ for running part programs according to DIN 66025/ CF card with 8 GB storage capacity (max. 3 GB available)/ Power display, operating hours and workpiece counter on the screen,

Year of construction: 2001, condition: ready for operation (used), travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, overall weight: 1,250 kg, total height: 2,129 mm, spindle motor power: 1,500 W, product length (max.): 1,940 mm, table load: 120 kg, table width: 1,317 mm, number of axes: 3, This 3s OKAMOTO ACC 450 DXA was manufactured in 2001. It features a grindable surface of 450 × 150 mm and a longitudinal travel of 530 mm, making it suitable for various grinding applications. With a maximum load capacity of 120 kg on the table, this machine offers robust performance. Consider the opportunity to buy this OKAMOTO ACC 450 DXA surface grinding machine. Contact us for further details. • Grinding table • Grindable surface: 450 × 150 mm Dodpfxoyiffgo Ag Rekk • Distance spindle–table: 60–510 mm • Max load on table: 120 kg • Wheel and spindle • Wheel diameter: 205 mm • Wheel peripheral speed: 2,400 m/min • Spindle motor power: 1.5 kW / 2P • Motors • Hydraulic pump motor: 0.75 kW / 4P • Cross feed motor: 0.75 kW / 3P • Headstock up/down motor: 0.4 kW

Year of construction: 1990, condition: ready for operation (used), travel distance X-axis: 4,300 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 17,000 mm, controller manufacturer: HEIDENHAIN, controller model: T355A, spindle motor power: 14,700 W, spindle speed (max.): 1,207 rpm, table length: 6,000 mm, table width: 1,060 mm, number of axes: 3, This 3s MECOF CS 88 G Bed Type Milling Machine was manufactured in 1990. It features a working table length of 6,000 mm and a maximum permissible load of 8 tons per meter. The spindle motor power is 14.7 kW, with a speed range of 10 – 1,207 rpm. If you are looking to get high-quality milling capabilities, consider the MECOF CS 88 G machine we have for sale. Contact us for further details. • Working table • T-slots: 6 on table + 2 lateral • T-slot width: 22 mm • Distance between T-slots: 175 mm • Max permissible load: 8 tons per meter • Axis travels • X (longitudinal column): 4,300 mm (variants: 2,300 / 3,300 / 4,300 mm) • Y (ram cross): 1,000 mm • Z (vertical head): 1,700 mm (variants: 1,200 / 1,700 mm) • Spindle • Constant torque range: 10–249 rpm • Spindle diameter (front bearing): 90 mm • Feeds • Micrometric feed rates: up to 4,100 mm/min • Working feed rate: up to 4,200 mm/min • Rapid traverse: up to 4,600 mm/min • Drives & motors Dkedpfoyi A Eysx Ag Rsk • Spindle motor: Thyssen, DC • Axis feed motors: Servomac • Lubrication and hydraulic pumps: Sever / Willi Vogel • Cooling system: dedicated headstock oil cooling • CNC control • Heidenhain T355A • Control unit: BE 412 B Technical Specification Taper Size ISO 50

Condition: ready for operation (used), Year of construction: 1999, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine. 2017 overhauled and two further similar machines available (both overhauled 2018)Overhaul of 2017 machine:Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindle overhaul of S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the cooling lubricant pump, all cooling lubricant lines, and the cooling lubricant sensor. Replacement of the scraper blades on the cross slides. Replacement of all pneumatic lines and valves. Replacement of the machine room light, transparent panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). Installation of a new central lubrication system. Replacement of the bellows coupling, external encoders, and screen. Replacement of the control and amplifier fans. During commissioning, the “Spindle Positioning S4” option was also activated and the loading magazine was set up. Additional information • Maximum bar length: 3040 mm • Electrical control box • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • Loading magazine with drum "HYBRIDE 10+5" • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Collet for Tryton • 2 different hybrid drums • Directional spindle stop S1 • Equipment to be equipped with Robobar SSF 3 m loading magazine Technical Specification Counter Spindle Yes Dsdpfxex D D Iks Ag Rskk