TORNOS DECO 2000-10
TORNOS DECO 2000-10

Name: TORNOS DECO 2000-10
Brand: TORNOS
Availability: InStock

Year of construction

1999

Condition

Used

Location

Germany

Show map

Machine data

Machine type:: TORNOS DECO 2000-10

Manufacturer:: TORNOS

Model:: DECO 2000-10

Year of construction:: 1999

Condition:: ready for operation (used)

Price & Location

Location:: , Germany

Call

Technical details

Bar diameter (max.):: 10 mm

Number of axes:: 9

Details about the offer

Listing ID:: A20701000

Reference number:: DE-TUR-TOR-1999-00001

Update:: 10.03.2026

Description

This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine.

2017 overhauled and two further similar machines available (both overhauled 2018)Overhaul of 2017 machine:Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindle overhaul of S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the cooling lubricant pump, all cooling lubricant lines, and the cooling lubricant sensor. Replacement of the scraper blades on the cross slides. Replacement of all pneumatic lines and valves. Replacement of the machine room light, transparent panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). Installation of a new central lubrication system. Replacement of the bellows coupling, external encoders, and screen. Replacement of the control and amplifier fans. During commissioning, the “Spindle Positioning S4” option was also activated and the loading magazine was set up.

Additional information

• Maximum bar length: 3040 mm
• Electrical control box
• AC drive motors
Gedpjx D D Ikefx Adbjbi
• Motor voltage: 3 x 380 V 50/60 Hz
• Control voltage: 1 x 24 V DC
• Movable headstock
• Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement
• Absolute measuring system
• 9 axes with C1 and C4
• Loading magazine with drum "HYBRIDE 10+5"
• 14 guide tubes for 1-4 mm bars
• 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm
• Collet for Tryton
• 2 different hybrid drums
• Directional spindle stop S1
• Equipment to be equipped with Robobar SSF 3 m loading magazine

Technical Specification
Counter Spindle Yes

Seller

Registered since: 2017

1,392 listings online

Call

Send inquiry

Telephone & Fax

+49 631 7... show

These listings may also fit your interest.

Listing

Drilling machine and milling machine TOS VARNSDORF WHN 13.8 C

Jászberény

1,829 km

Drilling machine and milling machine
TOS VARNSDORFWHN 13.8 C

€30,000

EXW Fixed price plus VAT

Call

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 07-16 1990, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, A machine in good condition, as shown in the pictures, manufactured in 1990 and equipped with NCT 90 control. It has been used very little and is being sold due to underutilization. The total weight of the machine is 33 tons. The machine is fully operational. Disassembly and transportation are the responsibility of the buyer. Gbsdpfxjw Sx Age Adbji

See details

Listing

CNC machining center OKUMA Euro Center V50

Dieburg

1,027 km

CNC machining center
OKUMAEuro Center V50

Call

Listing

Rödermark

1,020 km

Continuous blast machine - profile edge
MUNK-SCHMITZStab.- + Profilkantenstrahlanlage

Call

Condition: good (used), Year of construction: 2011, machine/vehicle number: MS 1153, Offer 23158 Technical data ca : - passage to blasting chamber B 370 x 170 mm - blasting nozzle - Door opening to blasting chamber - Blasting material pressure vessel - blasting material recovery Gbedpfxollvr Dj Adbei - separate control panel - space requirement blast machine 1600 x 2000 x H 1750 mm - space requirement blasting material container 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume 700 - 1500 m³/h - Suction fan 3 kW - space requirement filter unit 1600 x 1600 x H 3250 mm - mot. driven inlet roller table 4 m - roller table without drive 3 m - roller width approx. 800 mm - roller table height approx. 700 mm

See details

Listing

HERMLE C30U + RS Automation HERMLE C30U + RS Automation

Netherlands

1,006 km

HERMLE C30U + RS Automation
HERMLEC30U + RS Automation

Call

Condition: ready for operation (used), Year of construction: 2006, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, This 5-axis HERMLE C30U + RS Automation was manufactured in 2006, offering advanced capabilities for precision machining. Ideal for complex geometries, this vertical machining centre represents a significant asset for enhancing your production efficiency. Consider the opportunity to buy this HERMLE C30U vertical machining centre. Contact us for more information. Additional equipment • Tool Magazine: Additional magazine ZM157 • Tool Breakage/Measurement: BLUM tool breakage/measurement • Measuring Probe: Heidenhain • Event Messenger: Available • Electrical Heat Compensation: Provided • External Blowing Air: Provided / Oil Mist Extraction: Provided / Chip Trolley: 450 liters • Rotating Transparent Window: Available • Additional Accessories: Manual control module, flange for extraction 1, bed flushing, sealing air for scales, machine license TCS-Soflex Machine Benefits Technical Machine Benefits • Nc swivel rotary table: diameter 280 mm • Table axis: a-axis off-center / table specification: 6-way rotary feedthrough Gjdpox D Ew Hjfx Adbsbi • Spindle hours: approximately 50000 hours • Internal coolant supply: 80 / filter: paper belt filter / conveyor: scraper belt conveyor / automatic cabin door: yes • Polycarbonate safety glass: windows / frequency: 50 hz • Rs automation Technical Specification Taper Size SK 40

See details

Listing

Wood Milling Machine DECKEL-MAHO DMC 1035 V

Jünkerath

875 km

Wood Milling Machine
DECKEL-MAHODMC 1035 V

€34,000

Fixed price plus VAT

Call

Listing

Table boring mill TOS VARNSDORF WHN 13.8

Sweden

1,406 km

Table boring mill
TOS VARNSDORFWHN 13.8

Call

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 130 mm, spindle speed (max.): 1,000 rpm, table length: 1,800 mm, table width: 1,600 mm, Heidenheim TNC 355 Gedjyf Uc Aepfx Adbsbi

See details

Listing

Fuente de Cantos

1,920 km

Gear Shaping Machines
DEMMOF7280

Call

Listing

Gantry Millingmachine MTorres 5-Axis MTorres MGP-51350 TT

Lemmer

657 km

Gantry Millingmachine MTorres 5-Axis
MTorresMGP-51350 TT

Call

Condition: good (used), Year of construction: 2003, travel distance X-axis: 13,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 30,000 rpm, distance between stands: 6,500 mm, spindle nose: HSK A63, X-axis: 13.000 mm Y-axis: 4.500 mm Z-axis: 1.000 mm Distance between columns: 6.500 mm C-axis: 190º A-axis: 110º Positioning speed XYZ: 15.000 mm/min. Positioning speed AC: 10 tpm CNC Controller: Siemens 840D Spindle nose: HSK A63 Spindle speed: 30.000 rpm Spindle power: 20 kW Gsdpfx Adstt I Sfsbebi Toolchanger: 20 Pockets Torrestool tables: 16x X-axis: 11.500 mm Y-axis: 3.500 mm Z-axis: 750 mm Country of origin: Spain Machine size LxWxH: 19.000 x 11.000 x 6770 mm Machine weight: 70.000 kg The Torresmill Gantry is a 5-axis CNC milling and drilling machine, specially designed to work on aeronautical materials (Composite, Aluminum, Titanium, Steel, ...). The Torresmill gantry is perfectly combined with the Torrestool universal clamping device, guaranteeing flexibility and process time.

See details

Listing

Willich

806 km

Wood-Turning-Lathe
LANDONIOTMU 1200

€3,000

Fixed price plus VAT

Call

Condition: used, Year of construction: 1988, Distance between centres 1200 mm Gbodpfx Ask Sat Dedbsi Speed A) 70 - 380 U/min. turning speeds B) 380 - 2000 U/min weight 2,2 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

See details

Listing

Karlsbad

1,086 km

Vertical machining center
DMGCMX 600 V

Call

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 9 kVA, torque: 82 Nm, controller manufacturer: Siemens, table width: 560 mm, table length: 900 mm, table load: 600 kg, rotational speed (max.): 12,000 rpm, overall weight: 5,200 kg, number of spindles: 1, number of slots in tool magazine: 60, mount diameter: 40 mm, Equipment: chip conveyor, documentation/manual, Vertical machining center DMG MORI SLIMline Multi-Touch Control Table size: 900 x 560 mm Table load capacity: 600 kg Direct path measuring system X, Y, Z SK 40 spindle taper 20 bar internal coolant supply Gbjdpfow Ei E Hox Adbei 60-position tool changer Chip conveyor Renishaw probing kit for SIEMENS control

See details

Advertise here