Used Heating Coil Water for sale (20,845)

Condition: good (used), Year of construction: 1994, Heating system for hot water or steam Heating capacity: 6 MW Bsdoyizqnepfx Adholp Fuel: wood chips With oil burner as backup heating Dismantling must be carried out by the buyer

Condition: good (used), Stainless steel tank 50700l Diameter 3m Height 7.7m Stainless steel coil inside at the bottom of the tank. AISI304 stainless steel Flat bottom with a slope of 2.5% downwards. - Stainless steel hatch 410 x 520 with outward opening - Stainless steel drain valve DN70 - Stainless steel test pipe - Liquid level gauge Bedpfx Aetr Dvaedhelp 16 pieces available.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: AA2328995, total height: 2,495 mm, total width: 2,280 mm, total length: 10,500 mm, overall weight: 6,000 kg, Equipment: documentation/manual, For sale is a dry cooler (air-cooled liquid cooler with forced convection) designed for outdoor installation. Air is passed over the finned heat exchanger, which contains the working fluid, for example, a water-glycol mixture. Alfa Laval VDDSE1008.1CD96 C4 ICM Bedpfez S U Naox Adholp Dimensions approximately 10.5m x 2.28m x 2.95m (no heavy-duty transport required for transportation) Weight approximately 6 tons Cooling capacity 866.8 kW Airflow: 217476 m³/h Volume flow rate of cooling medium: 150.8 m³/h A cooling unit is being sold – it has already been dismantled and is ready for loading. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: unexamined, machine/vehicle number: HY-1000LPH, input voltage: 220 V, total height: 2,000 mm, total width: 1,000 mm, total length: 2,300 mm, energy consumption: 4 kWh, Equipment: documentation/manual, Reverse osmosis unit, purchased in 2020, and only tested once in 2024. Blodpfxsz Iqrne Adhep The machine is being sold as is.

Condition: used, This listing is for the Grant T100 12L Heating Circulating Bath The unit is in full working condition and is ready for immediate use Grant T100 12L Heating Circulating Bath – Stainless Steel Tank The Grant T100 12L Heating Circulating Bath is a robust, precise temperature control system combining the T100 Optima circulator with a 12-litre stainless steel tank. Ideal for laboratories requiring high stability and reliability for routine heating applications, it’s designed for use across many scientific disciplines. Key Features Temperature Range: +5 °C to 99 °C (cooling via immersion coil available) Capacities: 12 L Stainless Steel Tank: Durable, easy to clean, resistant to corrosion Temperature Stability: ±0.05 °C Bsdpfx Asy Dp Ekedholp Temperature Uniformity: ±0.1 °C Heating Power: ~1.3 kW Controller: Grant T100 Optima circulator

Condition: used, Temperature: Ambient to 85Deg C Dimensions: W32 x H30 x D35 cm Bedpfxsxx Ndaj Adhelp We have 2 units in stock! Good working condition. Please check out our other listings as well.

Condition: excellent (used), functionality: fully functional, Electric water heater Bsdsvbfvhepfx Adholp Maximum power - 18kW

Condition: used, This listing is for the Thermo Haake SC100 Water Bath + Immersion Circulator. The unit is in full working condition and ready for immediate use. Thermostatic water bath with integrated immersion circulator, designed for accurate temperature control in research and industrial labs. Ideal for sample incubation, heating, and fluid temperature regulation. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Bedpfx Adsy H Dlqshelp • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, This listing is for the Clifton NE4-8P Water Bath The unit is in full working condition and is ready for immediate release The Clifton NE4-8P Digital Water Bath With Circulator is an 8-litre laboratory water bath with an integrated pump that recirculates temperature-controlled water for uniform heat distribution. It’s designed for accurate temperature control with a PID digital controller, LED display, and temperature alarm Common lab uses include incubating samples, warming reagents, and stabilising solutions at set temperatures Bsdpfx Ajy Iw Aledhelp

Condition: used, This listing is for the Grant JB Academy 6005 Water Bath Bedpsy Iw Eysfx Adhjlp The unit is in full working condition and is ready for immediate use Grant Instruments JB Academy range of digital unstirred water baths — basic laboratory water baths designed for heating and maintaining liquids at controlled temperatures. They’re often used in teaching labs, research settings, schools and colleges where a simple, reliable water heating bath is needed.

Condition: used, This listing is for the Grant T100 12L Heating Circulating Bath The unit is in full working condition and is ready for immediate use Grant T100 12L Heating Circulating Bath – Stainless Steel Tank The Grant T100 12L Heating Circulating Bath is a robust, precise temperature control system combining the T100 Optima circulator with a 12-litre stainless steel tank. Ideal for laboratories requiring high stability and reliability for routine heating applications, it’s designed for use across many scientific disciplines. Key Features Temperature Range: +5 °C to 99 °C (cooling via immersion coil available) Capacities: 12 L Stainless Steel Tank: Durable, easy to clean, resistant to corrosion Temperature Stability: ±0.05 °C Temperature Uniformity: ±0.1 °C Heating Power: ~1.3 kW Controller: Grant T100 Optima circulator Blsdpfsxhfyiex Adhep

Condition: used, Autotherm Blodpfx Aozhkb Eodhsp Type: Autotherm AW 95-12/VK/E temperature control unit Autotherm AW95-12_VK temperature control unit for water/glycol temperature control (fully overhauled) Autotherm AW temperature control unit: For highly precise temperature control of water Autotherm temperature control units are used in various areas of industry, research, and laboratory applications. Temperature control units, for example, supply tools, open baths, double-walled containers, heat exchangers, and heating chambers with temperature-controlled water to maintain them at the desired temperature with high precision. Application areas: Mechanical engineering, for example, in the solar and wind power industry, textile industry Plastics processing Chemical and pharmaceutical industries Paper manufacturing Medical technology Food industry Research Autotherm AKW AW95-12/VK temperature control unit Temperature range: RT°C / +95°C Heating capacity: 12.0 kW Cooling capacity: 18.0 kW Passive cooling system via heat exchanger / connection to a cooling water network required Rated power: 14.5 kW Dimensions: 600 mm x 840 mm x 910 mm Power consumption: 400 volts / 50 Hz 13400 watts, 19.6 A, 5.1 bar Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint: light gray (RAL 9002) Door, double-leaf: hinged on the left and right Equipment: Passage through the floor and ceiling: 2 pieces each, nominal diameter 100 mm, for installing the pulsation table Passage in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measuring and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … ±0.5 K (time-dependent) depending on the range, in the stable state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the stable state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the stable state Temperature change rate measured in the outlet without test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C - Heating: 0.5 K/min on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic replenishment Condensate drain: backpressure-free, 3/4" hose connection Mains connection: 400 V; 3 PH+N PE; 50 Hz Connection value: max. 10 kVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen changeover, 12 weights each with 5 kg • 1 base frame in normal steel welded construction for fastening to the underside of the climate testing chamber. This frame is equipped with removable sheets on all sides and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearing and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttock simulation • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered at a later date after a precise definition.) • 2 three-phase motors, 2 belt drives with tensioning devices Bodpfsxbgrgsx Adhslp • 1 pneumatic control with 2 hand valves, a filter-regulator unit and a shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons, 2 release buttons, 2 speed indicators, 2 potentio

Condition: used, Year of construction: 2019, machine/vehicle number: 197341119, input voltage: 400 V, input frequency: 50 Hz, pressing force: 120 t, table width: 1,400 mm, table length: 3,200 mm, ITALPRESSE XL/8-S – water-heated platen veneer press Blsdpfx Ads Agxfgohsp Year of manufacture: 2019 Machine number: 197341119 Press area: 3,200 x 1,400 mm Pressing force: 120 tons Heating: Water Electrical connection: 400 V / 50 Hz Hydraulic veneer press with control unit and hydraulic unit as shown in the photos. Press area and pressing force according to the delivery note; year of manufacture and machine number according to the nameplate. Location: Basel area, Switzerland. Inspection possible until the beginning of December 2026 by appointment. Dismantling and removal between December 8th and 18th, 2026, after coordinating a date. Price upon request. Scope of delivery and current operational condition will be determined after consultation. Subject to change and errors.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 45,699 h, functionality: fully functional, machine/vehicle number: 81248168054807, power: 530 kW (720.60 HP), type of cooling: water, nominal power (apparent): 660 kVA, Equipment: documentation/manual, We are offering a used MAN E3262 LE202 combined heat and power (CHP) plant, manufactured in 2017. For sale is a standard-production CHP plant with an electrical output of 530 kW, designed for operation as a biogas plant or with natural gas. The plant is based on a MAN gas engine and a Leroy Somer synchronous generator. The corresponding manufacturer's data sheet is available. The unit is ready for operation and has been functioning perfectly up to the present. The entire plant is for sale, including the CHP unit, container with antechamber and switchgear cabinet, fresh and used oil tanks, plate heat exchanger, exhaust stack, exhaust gas heat exchanger, and some consumables. History & Maintenance: • Commissioning: 17.10.2017 • Major overhaul: carried out on 11.12.2025 - Replaced: cylinder heads with the latest version (M18), piston assembly including pistons, liners, connecting rods and all bearings, main cooling circuit pumps new • Last maintenance: turbocharger replacement in April 2026 - Technical data: • Plant type: CHP biogas plant 530 kW • Drive engine: MAN gas engine (internal combustion engine) • Engine number: E 3262 LE 202 • Electrical output: 530 kW • Thermal output: 559 kW • Firing heat output: 1358 kW • Power factor: 0.95 • Efficiencies: Electrical efficiency 39 % | Thermal efficiency 41 % • Heat extraction: Cooling water heat 264 kW + mixed heat HT 75 kW + exhaust gas heat up to 250°C / 220 kW Generator specifications (synchronous generator): • Manufacturer: Leroy Somer • Type: LSA 49.1 S4 C6S/4 • Rated apparent power: 660 kVA / I = 630A Blodpfx Ado Agu Tijhjp • Rated voltages: 400/230V • Grid connection / rated current: Star / 795 A • Protection functions (grid protection relay): AMG 2 (Leonhard/Woodward Stuttgart), including overvoltage/undervoltage protection, overfrequency/underfrequency protection, phase jump and vector jump. Complies with the BDEW guideline Chapter 2.5.3.

Condition: used, Universal Temperature Control Unit Oil Advanced with electric heating and connections for external cooling. Oil temperature control unit, circulating process temperature control, heating unit, cooling unit, electric heating. SINGLE Type Advanced Oil D2-300-18-116 Mfg. No.: 151777 Year of manufacture: 2015 Temperature max. 300°C (with heat transfer oil) Temperature range +20°C to 300°C Operating overpressure max. 8 bar Pump capacity 100 l/min Tank volume 22 liters (internal filling volume) Bodpfs Aarfaex Adhslp External filling volume max. 86 liters Heating power 18 kW Cooling capacity heat exchanger 116 kW Pump motor power 2.8 kW Heat transfer medium Marlotherm SH Circulating water supply and return DN25 - G 1" Cooling water supply G 1/2" Cooling water return G 1/2" Connection power 23.5 kVA Control SCT standard - 7" touch display Mains connection 400 volts, 50 Hz, 32.7 amps - Temperature control medium up to 300°C = heat transfer oil (Marlotherm SH) - Temperature control - External cooling unit or external cooling circuit is required for cooling (cooling is achieved via a heat exchanger between the cooling medium and the heat transfer oil) - Mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1125 x 395 x 1210 mm Weight 226 kg Good condition

Condition: used, This listing is for the Grant QBT1 Heat Block Bljdpfx Adox S H D Hehop The unit is in full working condition and is ready for immediate release The Grant Model QBT1 Dry Block Heater With 24x10.5mm Well Block is a compact dry block heater designed for laboratory temperature-controlled heating of small sample tubes. It’s part of Grant Instruments’ dry block heater family, used widely in molecular biology, biochemistry and general lab work for consistent incubations or reactions in tubes A dry bath / heat block heater that provides precise, stable heating for tubes (especially 1.5 mL Eppendorf-style tubes), without using water or oil baths. The heat is delivered through a removable aluminium block tuned to fit a specific tube format — in this case typically 24×1.5 mL tubes

Condition: used, Rotating device Gunter Seibold rotating device for HTS coils – continuously variable drive (Type S05082) Description: Professional rotating device for holding and rotating HTS coils with winding cores. Developed for the uniform distribution of two-component resin during the curing process. Ideal for development, laboratory, or production environments with high-temperature superconductor coils. The winding form is electrically heated; the power supply is directly connected to the form (not included in the scope of delivery). The machine impresses with its precise control, ease of operation, and service-friendly design. Technical features Solid machine stand: Welded square tube construction with adjusting screws and floor anchors Drive: Three-phase planetary gearbox motor (11 kW, 400 V, 50 Hz, 3 phases) Continuously variable speed (0.2 – 100 min⁻¹) Soft start & soft stop via frequency inverter (4-quadrant controller) Electromagnetic spring force brake (safe stopping in case of power failure) Rotating direction can be switched left / right Control panel: 5.7" touch panel for setting speed, direction, ramps, time, or number of revolutions Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrical system & control cabinet: Control integrated in the machine stand Blodpfszil R Rox Adhep 400 V / 230 V power supply, 24 V DC control voltage Circuit breaker, RCD protection 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with air conditioning unit Complete grounding & static discharge of the main shaft Adjustable work area light (swivel and height adjustable) Feature / Value Max. coil diameter 1,500 mm Coil passage 1,700 mm Center height above floor 1,100 mm Max. load on turntable 500 kg Turntable Ø 600 mm, 4 T-slots (DIN 650) Speed range 0.2 – 100 min⁻¹ (continuously variable) Torque 775 – 539 Nm Operating voltage 400 V / 50 Hz Control voltage 24 V DC Connected power 11 kW Connected current 32 A Color scheme (according to RAL) Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / control cabinet: Light gray (RAL 7035 / 5010) Weight: approx. 1800-2000 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer. Bjdpfx Adszrg T Eshslp

Condition: used, functionality: fully functional, For sale: an industrial Nilfisk ALTO SOLAR BOOSTER 7-58E18H high-pressure washer with electric water heating, 18 kW. This stationary unit is designed for cleaning machines, equipment, floors, and industrial fixtures. Technical specifications according to the nameplate: Manufacturer: Nilfisk ALTO Model: SOLAR BOOSTER 7-58E18H Product number: 107370270 Bljdpo Ad Nkbefx Adhop Serial number: 3520122200419 Working pressure: 170 bar Maximum permissible pressure: 250 bar Flow rate: 18.5 l/min – 1110 l/h Maximum temperature (according to nameplate): 85°C Electric heating power: 18 kW Total rated power: 25.5 kW Power supply: 400 V, three-phase, 50 Hz Rated current: 39 A Protection rating: IPX5 Weight: 155 kg Country of manufacture: Hungary Equipment visible in the photos: High-pressure hose Nilfisk high-pressure gun Spray lance Pressure gauge Water temperature adjustment Control panel with START/STOP buttons and a main switch The unit has an additional marking on the housing: “MAXIMAL 70 Grad,” indicating a temperature limit of 70°C. The unit is used and shows visible signs of wear.

Condition: used, Universal temperature control unit Oil Advanced with electric heating and connections for external cooling Pressurized water temperature control unit, circulating process temperature control, heating unit, cooling unit, electric heating SINGLE type STO 1-18-100-D2 Serial No.: 133616 Year of manufacture: 2013 Temperature max. 300°C (with heat transfer oil) Temperature range +20°C to 300°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume 22 liters (internal filling volume) External filling volume max. 86 liters Heating capacity 18 kW Cooling capacity heat exchanger 116 kW Pump motor power 2.8 kW Heat transfer medium Marlotherm SH Circulating water supply + return DN25 - G 1" Cooling water supply G 3/4" Cooling water return G 1/2" Connection power 24.2 kVA Controller SC type R8200-S-1-SI1-0-6 Mains connection 400 Volt, 50 Hz, 33.7 Amp. - Temperature control medium up to 300°C = heat transfer oil (Marlotherm SH) - Temperature control - For cooling, an external cooling unit or an external cooling circuit is required (cooling is carried out via a heat exchanger between the cooling medium and the heat transfer oil) Bedpfxez Ebv Eo Adhslp - Mobile on 4 rollers - Supplied without the illustrated connection cable with plug Dimensions L x W x H 1280 x 395 x 1180 mm Weight 226 kg Good condition

Condition: used, Rehsler TW HL4006D industrial chiller unit The Rehsler TW HL4006D is an industrial chiller unit specifically designed for cooling the high-performance Trumpf Haas HL 4006D laser. The system is designed to dissipate the waste heat generated during the laser process, thereby ensuring a constant operating performance. The unit is primarily used in automated production lines, often in conjunction with industrial robots, where the associated laser is used for welding highly reflective materials such as aluminum or copper. Technical data at a glance: The unit is characterized by the following performance parameters: - Cooling capacity/rated output: 11 kW. - Electrical connection: 400 V voltage with a current draw of 18 A. - Operating pressure: Permissible pressure up to 10 bar. - Protection class: IP54 (protected against dust and splashing water). - Temperature range: Suitable for ambient temperatures of at least 5 °C up to a maximum of 43 °C. “Everything from a single source: We will be happy to offer you suitable bank financing for your project.” Bodpfx Aoxg Hmnedhslp You can find more new and used items in our shop! International shipping costs on request!

Condition: used, SINGLE Industrial Temperature Controller / Water Temperature Controller / Temperature Control System SINGLE STW 150/1-6-B25T/40-K7/KS7 Water/Glycol Temperature Controller Year of manufacture 2016 – mobile industrial version For sale is a used industrial temperature controller from the manufacturer SINGLE Temperiertechnik GmbH, model STW 150/1-6-B25T/40-K7/KS7. The temperature controller is suitable for temperature control of tools, machines, and industrial process circuits. According to the nameplate, the heat transfer medium is water/glycol. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: STW 150/1-6-B25T/40-K7/KS7 Device type: Industrial temperature controller Year of manufacture: 2016 Country of manufacture: Germany Heat transfer medium: Water / Glycol Electrical data: Bjdpfx Aj Aa Ngzjdhelp Operating voltage: 400 V Current type: 3~ / PE Frequency: 50 Hz Rated current: 14.8 A Apparent power: 10.2 kVA Temperature control system: STW 150 series for industrial temperature control applications Water/glycol circuit Hydraulic connections for heat transfer medium Pressure gauge Piping and connection fittings Rear connection assembly Equipment: Industrial temperature controller Water/glycol temperature control Electrical main switch Pressure gauge Shut-off valve Hydraulic connections Connecting lines Ventilation openings in the housing Closed industrial housing Transport handle Castors Equipment as shown in the pictures Application areas: Tool temperature control Injection molding machines Plastics processing Mechanical engineering Production plants Process and circuit temperature control Industrial temperature control applications Mold and tool making Dimensions / Transport: Dimensions (L x W x H): not yet determined Unladen weight according to the nameplate: 131 kg Condition: Used Year of manufacture 2016 Optical condition as shown in the pictures Signs of wear and tear due to use are present. Some deposits and signs of wear are visible on the rear connections and fittings. Scope of delivery: 1 × SINGLE STW 150/1-6-B25T/40-K7/KS7 temperature controller Connection assembly and fittings as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping or freight shipping possible by arrangement. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, SINGLE Industrial Temperature Controller / Water Temperature Controller / Temperature Control System SINGLE STW 150/1-6-B25T/40-K7/KS7 Water/Glycol Temperature Controller Year of manufacture 2016 – mobile industrial version For sale is a used industrial temperature controller from the manufacturer SINGLE Temperiertechnik GmbH, model STW 150/1-6-B25T/40-K7/KS7. The temperature controller is suitable for temperature control of tools, machines, and industrial process circuits. According to the nameplate, the heat transfer medium is water/glycol. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: STW 150/1-6-B25T/40-K7/KS7 Device type: Industrial temperature controller Year of manufacture: 2016 Country of manufacture: Germany Heat transfer medium: Water / Glycol Electrical data: Operating voltage: 400 V Current type: 3~ / PE Frequency: 50 Hz Rated current: 14.8 A Apparent power: 10.2 kVA Temperature control system: STW 150 series for industrial temperature control applications Water/glycol circuit Hydraulic connections for heat transfer medium Pressure gauge Piping and connection fittings Rear connection assembly Equipment: Industrial temperature controller Water/glycol temperature control Electrical main switch Pressure gauge Shut-off valve Hydraulic connections Connecting lines Ventilation openings in the housing Closed industrial housing Transport handle Castors Equipment as shown in the pictures Application areas: Tool temperature control Injection molding machines Plastics processing Mechanical engineering Production plants Process and circuit temperature control Industrial temperature control applications Mold and tool making Dimensions / Transport: Dimensions (L x W x H): not yet determined Unladen weight according to the nameplate: 131 kg Condition: Used Year of manufacture 2016 Optical condition as shown in the pictures Signs of wear and tear due to use are present. Some deposits and signs of wear are visible on the rear connections and fittings. Scope of delivery: 1 × SINGLE STW 150/1-6-B25T/40-K7/KS7 temperature controller Connection assembly and fittings as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping or freight shipping possible by arrangement. Subject to changes, errors and prior sale. Bodps Aa Nf Refx Adhjlp We would be happy to answer any further questions by telephone.

Condition: used, SINGLE Industrial Temperature Controller / Water Temperature Controller / Temperature Control System SINGLE STW 150/1-6-B25T/40-K7/KS7 Water/Glycol Temperature Controller Year of manufacture 2016 – mobile industrial version For sale is a used industrial temperature controller from the manufacturer SINGLE Temperiertechnik GmbH, model STW 150/1-6-B25T/40-K7/KS7. The temperature controller is suitable for temperature control of tools, machines, and industrial process circuits. According to the nameplate, the heat transfer medium is water/glycol. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: STW 150/1-6-B25T/40-K7/KS7 Device type: Industrial temperature controller Year of manufacture: 2016 Country of manufacture: Germany Heat transfer medium: Water / Glycol Electrical data: Operating voltage: 400 V Current type: 3~ / PE Frequency: 50 Hz Rated current: 14.8 A Apparent power: 10.2 kVA Temperature control system: STW 150 series for industrial temperature control applications Water/glycol circuit Hydraulic connections for heat transfer medium Pressure gauge Piping and connection fittings Rear connection assembly Equipment: Industrial temperature controller Water/glycol temperature control Electrical main switch Pressure gauge Shut-off valve Hydraulic connections Connecting lines Ventilation openings in the housing Closed industrial housing Transport handle Castors Equipment as shown in the pictures Application areas: Bledpfx Adj Aa Ng Ishjp Tool temperature control Injection molding machines Plastics processing Mechanical engineering Production plants Process and circuit temperature control Industrial temperature control applications Mold and tool making Dimensions / Transport: Dimensions (L x W x H): not yet determined Unladen weight according to the nameplate: 131 kg Condition: Used Year of manufacture 2016 Optical condition as shown in the pictures Signs of wear and tear due to use are present. Some deposits and signs of wear are visible on the rear connections and fittings. Scope of delivery: 1 × SINGLE STW 150/1-6-B25T/40-K7/KS7 temperature controller Connection assembly and fittings as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping or freight shipping possible by arrangement. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.