Used Heating Coil Water for sale (19,861)

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Hfsdjwydgzopfx Aadoc

Year of construction: 2014, condition: ready for operation (used), A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible. Hodsx Ih D Hopfx Aadjfc

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Hfjdsxc Ni Ropfx Aadec

Condition: ready for operation (used), Year of construction: 2020, A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Hfsdpfx Aasxmkcmjdec

Condition: ready for operation (used), Year of construction: 2020, Cooling output: 420kW, connected load: 7.1kVA, weight: 4.9t, with Cooling Tower Baltimore Aircoil International TXV 237R and Desalination Control System Chemie + Wasser Lohbeck DS6, with documentation, an inspection is possible. Hedpfx Aeu Rn Agjadjfc

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Hsdpfjtwqzrex Aadefc

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Hfsdpfetphubsx Aadsc

Condition: ready for operation (used), Year of construction: 2015, A lightly used Clayton quick steam generator including water treatment in container design is available. Operating overpressure: 10bar, operating temperature: 184°C, pressure vessel volume: 235l, heating surface: 27.5m², steam capacity: 1253kg/h, output: 786kW, test pressure: 15bar, fuel: natural gas H, fuel heating value: 33200kJ/Nm³, burner output min./max.: 281kW/843kW, max. gas pressure regulator/burner: 40mbar/25mbar, nominal gas flow: 91.4Nm³/h. Overall system dimensions X/Y/Z: approx. 6300mm/2450mm/3000mm, weight: approx. 6000kg, operating hours: under 4000h. The system was tested at the end of 2023 and in mid 2024. Documentation available. On-site inspection is possible. Hfjdpsx Srphsfx Aadjc

Year of construction: 1986, condition: ready for operation (used), A plate heat exchanger WMW is available. Heating medium: steam, cooling fluid: water, temperature range: 15°C-90°C, flow rate: 2000l/h, steam quantity: 300kg/h, weight: approx. 355kg. An on-site inspection is possible. Hfsdox Syv Nopfx Aadjc

Year of construction: 2011, condition: ready for operation (used), A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Hsdpfx Aasx Sywaedefc

Year of construction: 2012, condition: ready for operation (used), Four heat exchangers from various manufacturers are available. 1) Shell and tube heat exchanger K. Ley Maschinen- und Apparatebau, year of manufacture: 1999, material: stainless steel/cast iron, heat transfer surface: 30m²-40m², operating pressure inside/outside: 25bar/45bar, max. operating temperature: 250°C, internal/external volume: 290l/200l, machine dimensions X/Y: approx. 6400mm/400mm, weight: approx. 1800kg. 2) Shell and tube heat exchanger Wisstaler Hüttental, year of manufacture: 1979, heat transfer surface: 80m²-120m², max. operating temperature: 150°C, internal/external volume: 579l/1387l, machine dimensions X/Y: 2500mm/800mm, weight: approx. 2800kg. 3) Shell and tube heat exchanger Vehterus PSHE 3LL-270/5/5, year of manufacture: 2012, heat transfer surface: 19.9m², capacity: 245kW, operating pressure: 16bar, test pressure: 33bar, max. operating temperature: 110°C, internal/external volume: 21.4l/33.2l, machine dimensions X/Y: approx. 850mm/400mm, weight: approx. 300kg. 4) Plate heat exchanger GEA BT30-5C-10V-80, year of manufacture: 2010, heat transfer surface: 5m²-10m², max. operating temperature: 200°C, machine dimensions X/Y/Z: approx. 500mm/350mm/750mm, weight: approx. 520kg. Documentation available. An on-site inspection is possible. A package sale is preferred. Hfedpfoxn S S Sox Aadsc

Year of construction: 2020, operating hours: 1 h, condition: new, - Pressure washer PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, ... - cold water / hot water / steam 32 bar up to 140°C / high pressure steam 150 or 200 bar up to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and empty weight : 110x64x98cm, approx. 150kg - incl. 10 m high pressure hose, spray gun, lance and flat jet nozzle 25°. Hedefh Skaopfx Aadofc

Condition: used, Year of construction: 2002, machine/vehicle number: 98, Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Arbeitsfläche / Working area max. 350 x 650mm Hfsdpoupy S Nofx Aadoc 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), axle configuration: 3 axles, first registration: 07/2007, total length: 13,800 mm, total width: 2,550 mm, total height: 2,300 mm, suspension: air, tire size: 385/65R22.5, color: red, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Disc brakes = Further information = Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 30%; right: 30% Rear axle 2: Tyre tread left: 30%; right: 30% Rear axle 3: Tyre tread left: 40%; right: 40% Weights Gross Vehicle Weight (GVW): 39,000 kg Functionality Loading platform height: 125 cm Condition Hjdpoydktbsfx Aadsfc Technical condition: very good Optical condition: very good

Condition: used, maximum load weight: 28,640 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2012, next inspection (TÜV): 04/2026, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,400 mm, loading space volume: 81 m³, total width: 2,550 mm, total height: 3,830 mm, Year of construction: 2012, Equipment: ABS, 3-Axle Krone SD Standard Coil Tautliner VIN: 534171 Chassis / Attachments: * Air suspension // Raise and lower * Lift axle * Jost landing legs * 3 x Daimler axles with disc brakes * Tyres: 385/65 R22.5 * Remaining tread depth: F. approx. 60/30% M. approx. 30% R. approx. 30% * Coupling height approx. 1140 mm * 1 x PVC storage box Body: * Tautliner Coil Standard * Coil well 8,850 mm * Multilock * Pallet stops on both sides * Aluminium slats * Lashing rings * Edscha sliding roof * Side curtains Weights: * Gross weight: 36,000 kg * Unladen weight: 7,360 kg * Payload: 28,640 kg Other: * German vehicle * Main inspection (HU) / Safety inspection (SP) 10 / ---- New main inspections / safety checks or weight downgrades/upgrades available on request. We are happy to assist you in obtaining export/transfer license plates, and we can arrange delivery of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing & typing errors, subject to alterations, prior sale, and errors excepted!----Who are we? Leible Nutzfahrzeuge is a family-run company based in Kehl am Rhein. With many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sales of new and used commercial vehicles. On 11,000 m², we offer a wide variety of vehicles. Our company philosophy is characterised by fairness and integrity. Since customer satisfaction is very important to us, we offer an excellent all-round service package and provide you with a competent contact person who will assist you in buying or selling vehicles. See for yourself! Hsdpfx Aeyihtysadofc Our services for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Organising special transports We are happy to assist you in organising special transports. Temporary / export number plates We are happy to help you obtain export and short-term number plates.

Condition: used, maximum load weight: 31,450 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2006, next inspection (TÜV): 11/2026, loading space length: 13,630 mm, loading space width: 2,470 mm, loading space height: 2,750 mm, loading space volume: 93 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2006, Equipment: ABS, 3-Axle Schmitz Cargobull SCS 24/L-13.62P CEB VIN: 3035016 Chassis / Attachments: * Air suspension // Raising and lowering function * Jost landing gear * 3 x SAF axles with disc brakes * Tyres: 385/65 R22.5 * Remaining tread depth: Front approx. 30% / Middle approx. 50/30% / Rear approx. 70/30% Body: * Tautliner with coil well * Coil well length: 8,500 mm * Pallet stops on both sides * Edscha sliding roof * Side curtains * Lashing rings * Multilock system Weights: * Gross weight: 39,000 kg * Unladen weight: 7,550 kg * Payload: 31,450 kg Other: * German vehicle * General inspection (TÜV) valid until 11/2026 // Safety inspection (SP) valid until 05/2026 ---- New general inspections / safety inspections or adjustments to permitted weights (increase or reduction) are possible upon request. We are happy to assist you with export/temporary registration plates and the transportation of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for typographical or printing errors. Subject to change, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge's particular strength lies in the sale of new and used commercial vehicles. On our 11,000 m² premises, you will find a wide selection of vehicles. Our company philosophy is characterised by fairness and integrity. Customer satisfaction is our top priority, so we offer an excellent all-round service package and provide a competent contact person who supports you in buying or selling vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Organisation of special transport We are happy to help you organise special transport services. Temporary/export registration plates Hodpfx Aajyihttsdefc We are happy to help you obtain export or short-term registration plates.

Condition: used, Year of construction: 2017, machine/vehicle number: AT86, Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph Technical Specifications and Use of the heating tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph heats bottles using a hot water system, which makes it ideal for applications in the bottling industry. Moreover, this heating tunnel performs reliably and includes advanced technical features. It handles cylindrical bottles of various sizes while ensuring high efficiency and operational precision. Technical Specifications of the Used Heating Tunnel The used heating tunnel employs a hot water heat exchanger, and users need to supply hot water through a gas boiler. Consequently, this setup heats the bottles uniformly and optimizes the workflow. Additionally, the recycling pump and dryer consume 53 kW of energy, which ensures energy efficiency while maintaining high performance. Furthermore, the used heating tunnel processes 12000 bottles per hour (bph), which makes it particularly suitable for high-speed bottling lines. Its FIFO (First In First Out) single-file system organizes bottles into a continuous and orderly flow. As a result, the system ensures consistent thermal treatment. In terms of compatibility, the machine handles cylindrical bottles with diameters ranging from 60 mm to 100 mm. Therefore, it provides versatility for different formats and types of containers. Additionally, the tunnel operates counterclockwise (right-to-left), which suits specific production layout requirements. Usage Conditions and Manufacturing Details The heating tunnel HTD12 operates in an “as-is” condition, so buyers must inspect the machine thoroughly before purchase. Notably, the manufacturer built this model in 2017, delivering a reliable and high-quality solution for integrating a heating tunnel into production lines. Omar R&G, a company renowned for producing high-quality machinery for the bottling industry, designed the HTD12 model to withstand intensive use. Consequently, it maintains operational reliability even in demanding environments. Technical and Functional Advantages Hodpfxevxz Axo Aadsfc The hot water heat exchanger delivers precise temperature control, which ensures uniform bottle heating. Moreover, the FIFO system keeps bottles in their entry order, which minimizes delays or errors during processing. In addition, the modular design and optimized layout simplify maintenance. Users can, therefore, integrate the tunnel quickly into existing lines. Furthermore, the system accommodates bottles of different diameters, providing versatility for diverse industrial applications. Conclusion of the Heating Tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph provides a high-performing, reliable, and versatile solution for bottle heating. Moreover, the machine processes 12,000 bph, organizes bottles efficiently using the FIFO system, and supports various formats. Consequently, it proves to be an excellent choice for high-productivity bottling lines. Thus, this HTD12 model by Omar R&G combines high performance with operational simplicity. As a result, it becomes a solid choice for industry professionals who seek reliability and efficiency. Therefore, for companies that prioritize productivity and precision, this machine represents a long-term investment.

Condition: new, Year of construction: 2023, functionality: fully functional, power: 150 kW (203.94 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 150" heating cannon is a powerful heater that can be used in halls, workshops, marquees, for materials, greenhouses, and more. Currently, 1 unit is in stock and available for immediate delivery. Condition: New / unused from warehouse clearance / insolvency sale Scope of delivery: 1 pc. Remko CLK 150 heater with oil burner 1 pc. room thermostat with power cable Hfsdpfx Aoxli I Ssadjc Nominal heat output: 150 kW Air flow rate: 9,710 m³/h Fuel: EL heating oil Maximum fuel consumption: 14.8 L/h Flue gas loss: max. 9% Flue outlet: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): approx. 1350 x 920 x 2100 mm Weight: approx. 312 kg The machine can be inspected on site by appointment. All information provided without guarantee. Subject to prior sale.

Condition: used, Used SGL Carbon Technic Sas (France) model CKL7 diam.16 - 10 blocks, graphite (DIABON NS1) heat exchanger/cooler-condenser with surface area 102,6 sq. meters. Has 10 graphite blocks, each diameter 765 mm x 347 mm height. Construction material of shell P265GH (W.Nr. 1.0425). Process side rated full vacuum/3bar at 1 to 110 deg.C. Design pressure -1/3Bar at 1 to 110 deg.c. Service side rated 5 bar design pressure at 1 to 40 deg.C. Process side capacity 542 litre and service side capacity 648 litre. Product inlet diameter: 450 mm and 100 mm outlet. Dimensions: 1000 mm diameter x 4520 mm height. Mounted on (3) lugs. New 2010. Transport dimensions: 4700 mm lenght x 1 450mm width - 1700 hight. Transport weight: 5 600 kg, (only exchanger 4950 kg). Hjdpfx Ajyi Ewfeadefc Weight: Actual: Kg5600.0

Condition: new, Alfa Laval CBH62-12AH-G Capacity: approx. 10 kW Length: 530.00 mm Width: 120.00 mm Hodpfexp Nzajx Aadjfc Height: 90.00 mm Weight: approx. 5 kg Connection Side A: 1" external gas thread Side B: 19 mm weld connection Price per piece Several units in stock All staff speak Dutch, German, and English Prices are exclusive of VAT Shipping possible (extra fee) (Subject to changes and errors in technical data, information, and prices, as well as prior sale)

Condition: new, Alfa Laval CBH65-22 AH-F 20 kW Performance: 20 kW Hfjdpfx Aasxqyaiodsc Price per unit Several units in stock All staff speak Dutch, German, and English. Prices are exclusive of VAT. Shipping possible (at extra cost). (Specifications, information, and prices are subject to change and errors; prior sale reserved.)

Condition: excellent (used), For sale: complete fire-fighting trailer equipped with a professional ALCO MONITOR water cannon. The set is fully mobile – ideal for fire brigade use, fire protection, and securing large areas (fuel depots, sawmills, production plants, storage yards). Technical condition: • ALCO / MONITOR water cannon – heavy-duty cast iron construction • Full adjustment of direction and spray angle (control wheels) • Directional nozzle on extended boom • KALI Anhänger Service GmbH trailer, GVW 700 kg • Hitch: Peka Fahrzeugbau, type DV127 • Two side tanks with filling ports • Shut-off valves, fire-fighting quick couplings • Stabilizing supports with height adjustment • Lighting installation, fenders, wheels in very good condition • Well-maintained, complete, ready to use Applications: • Voluntary/Professional fire brigades • Large production facilities • Timber yards, sawmills • Chemical and fuel plants • Securing mass events • Extinguishing fires from a great distance / high water flow Hfodpfx Aaox Edrrodsc

Condition: excellent (used), I'm selling a Heraeus T 5042 EK search engine Hfodpfeu Udp Iex Aadec

Condition: used, Year of construction: 1988, Robatherm RL 300 heater with Viessmann gas burner with valve, including 10 m stainless steel chimney with cleaning flaps. Year of manufacture: 12/88. For sale due to new acquisition. Fully functional. Hfedpfjx Uqc Esx Aadoc

Condition: good (used), Year of construction: 2003, RIBO BE-AL-F1 dust extraction , water extraction vacuum filter, separator for grinding , polishing , cutting , brushing , deburring , aluminum and metals wet. Hedpstpwrqsfx Aadjfc Extraction made of stainless steel. The vacuum fan is located behind the filter on the clean side, which reduces the risk of explosion initiation to a minimum. Ideal filter for extracting and filtering hot and flammable or highly hygroscopic dusts that do not allow the use of traditional cartridge or bag filters, guaranteeing reduced maintenance costs. Recommended for use in mechanical workshops, it is ideal for grinding, brushing and metal polishing departments. Eex 1.85 Kw fan Capacity 1600 m3/h Vacuum of 2500 Pa