Used Heating Coil Water for sale (19,917)

Year of construction: 2022, operating hours: 50 h, condition: excellent (used), functionality: fully functional, Ice Water System Langheinz L 130 High peak cooling capacity with ice bank Stainless steel construction Water connection: 1/2" Top technology Device dimensions L x W x H mm: 560 x 590 x 900 Weight empty / in operation approx.: 65kg / 160kg Connection 220V Used device, cleaned with warranty Option: Maintenance contract Delivery service Commissioning & instruction Predpfx Ahoxmq Tle Ujf Additional bakery machines in stock!

Year of construction: 2010, condition: used, GENERAL INFORMATION Heat exchange surface: 80.0 m² Year of manufacture: 2010 Remarks: Manufacturer: De Dietrich; Material: Borosilicate glass; Max. operating pressure: 3 bar; Temperature range: -80°C to +200°C; Heat exchange surface: 80 m² + 1.5 m²; Area of application: Suitable for temperature control, condensation, and evaporation of highly corrosive media; Exact dimensions can be found in the drawing Overall height: 3,180 mm Location: Bremen Technical documentation: Drawing, assembly instructions Prjdpfx Asxqciyjh Usf Condition: Used Last application: Pharmaceutical JACKET SPACE Volume of jacket space: 376 liters TUBE SPACE Volume of tube space: 32 liters Max. permissible operating overpressure jacket space: 0.5 bar Max. permissible operating vacuum jacket space: 1.0 bar Max. permissible operating temperature jacket space: 180°C Max. permissible operating temperature tube space: 180°C Max. permissible operating overpressure tube space: 3.0 bar Max. permissible operating vacuum tube space: 1.0 bar

Condition: good (used), This jug automatically refills your battery with demineralized water.  Indispensable! Prjdsu Hgw Uepfx Ah Usf Price includes shipping within the Netherlands.

Year of construction: 1991, condition: ready for operation (used), Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water pre-pressure 3 bar or slightly higher residue -0.2 less than 0.1 ppm at a water temperature of 12°C Predpfxotttl Ro Ah Uof with 1 APV centrifugal pump with 15 KW with 1 vacuum pump, manufacturer Travini Italy, 11 KW with CO2 dosing via needle valve with level control of the incoming and outgoing Water 1 control cabinet standing on 2 feet with

Condition: new, Year of construction: 2025, WJA II TYPE /WATERJET CUT COMI, leader in design and manufacture of Water Jet Cutting Centre, presents its new generation of table type “WJA II” 3, 4 or 5 axis. Heart of COMI range, it is compatible with all the options and can evolve in time! The machine is driven by a latest generation CNC FANUC (No.1 Global) allowing ease of use and offering a previously unequalled level of Reliability and Precision. The very high pressure water supply (4000B – 6200B), is supplied by a BFT pump (European No. 1) or KMT (No.1 Global). The Human/Machine interface is customizable, Prjdpfogu D U Ajx Ah Uef like the CNC it is fully programmed internally by our Design Office, and managed under Windows 7 PRO. The system is intended to operate autonomously. The numerous sensors allow control and remote control of the system via a computer network and via internet. The equipment is very compact and uses only high quality mechanical and electrical components for increased reliability. STANDARD FEATURES Cutting speed limited to 30M/MIN. Repeatability +/- 0,02 MM. Absolute precision +/- 0,03 MM. CNC WITH INTEGRATED PC Easy management via the Windows® 7 PRO application Networking possible (Server) 3D graphic function Powerful backups Internet connection as Standard WebCam optiona

Condition: good (used), mileage: 953,762 km, power: 324 kW (440.52 HP), first registration: 09/2013, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,460 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: steel-air, total length: 9,580 mm, total width: 2,550 mm, Year of construction: 2013, Equipment: AdBlue, central locking, cruise control, electric window regulation, onboard computer, parking heater, spoiler, = Additional options and equipment = - Rear work lights - Front work lights - Windscreen - Air suspension - Sleeper cab - Auxiliary heater - Automatic pre-heating system = Remarks = MAN TGX26.440 6x2*4 - 3-deck Livestock - Water & Ventilation MY: 30-09-2013 KM: 953,762 WMA18XZZ5EW188772 MAN 3-deck livestock body with water supply & ventilation Tail lift on truck and trailer Folding roofs Electric floors Manual gearbox Euro 5 Steering axle = Further information = Technical specifications Number of cylinders: 6 Engine displacement: 10,518 cc Axle configuration Front axle: Max. axle load: 8,000 kg; Steered; Suspension: leaf suspension Rear axle 1: Twin tyres; Max. axle load: 11,500 kg; Suspension: air suspension Rear axle 2: Lift axle; Max. axle load: 8,000 kg; Steered; Suspension: air suspension Prsdox Ndqxepfx Ah Ujf Weights Unladen weight: 12,585 kg Payload: 13,415 kg Gross vehicle weight: 26,000 kg Maintenance, history, and condition APK (MOT): valid until 11.2026 Technical condition: good Cosmetic condition: good Identification License plate: 58-BDD-6

Condition: excellent (used), Heating hose, adhesive melter, gluing machine, hot glue machine, industrial hot glue gun -Condition: unused -Type: FE-H/PN2-1.8-13-PT100 -Connection: 230 V 50 Hz 320 W -Heating capacity: 200 °C -Total length: 2000 mm Prodpjb A Harofx Ah Ujf -Weight: 3 kg

Condition: new, Year of construction: 2020, Water Tank MB 32 Standard configuration includes:    • Swivel drawbar eye    • Hydraulic support leg    • Side connection on the left, blind flange on the right    • Braked ADR axle    • Tyres 500/50/17    • Galvanised tank    • 6" Perrot couplings    • Tank capacity: 3,167 litres Prsdpfxex I Envs Ah Usf    • Pump capacity: 4,000 litres/min    • Tank diameter: 110 cm    • Total length: 530 cm    • Total height: 200 cm    • Axle thickness: 60 mm    • Brake drum: 300x60 mm    • Complete with suction hose, PTO shaft and spray nozzles    • Including registration Condition: New Year of manufacture: 2020

Condition: excellent (used), Thermo Scientific Vötsch Type: UT 6420 For sale is a professional laboratory and industrial drying oven / heating cabinet, Thermo Scientific / Vötsch Industrietechnik – Type UT 6420. This unit is suitable for drying, heating, tempering, and heat treating materials and components at precisely controlled temperatures up to 300 °C. Typical areas of application include laboratory, industry, workshop, research, electronics, and materials testing. The stainless steel chamber ensures uniform heat distribution and is designed for continuous operation. Chamber: Stainless steel with insertion racks External dimensions (approx.): 170 × 70 × 80 cm (H × W × D) Technical specifications: Manufacturer: Thermo Scientific / Vötsch Industrietechnik Type: UT 6420 Max. temperature: 300 °C Temperature control: Electronic (Heraeus Kelvitron) Prodpox Hf Uaofx Ah Uof Rated voltage: 3/N/PE 400 V, 50/60 Hz Rated current: 6.6 A Power consumption: approx. 4.2 kW Protection class: IP20 Weight: approx. 200–230 kg Condition: used Scope of delivery: (see photo) (Specifications are subject to change and errors; details are non-binding!) For further questions, we are happy to assist you by phone.

Condition: new, empty load weight: 4,800 kg, maximum load weight: 39,200 kg, overall weight: 44,000 kg, axle configuration: 3 axles, loading space length: 10,040 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 54 m³, tire size: 385/65 R22,5, Year of construction: 2025, Equipment: ABS, Unladen weight: 4,800 kg, gross vehicle weight: 44,000 kg, load securing with certificate, cargo area (L W H): 10,040 mm x 2,480 mm x 2,200 mm. Tire size: 385/65 R22.5, certificate DIN EN 12642 (Code XL), loading volume: 54 m³. 1st axle: , 2nd axle: , 3rd axle: , underrun protection, lift axle, electronic braking system (EBS), connection plugs 1x15 and 2x7 pin, anti-spray, light alloy wheels, additional stake pockets in the center and outside, telematics system, tire pressure monitoring, ram bumpers. You can find our entire vehicle range at . Interested in financing? With our Value Added Services we offer you custom financing options, full service and telematics solutions. We are happy to advise you. Pjdpfx Ahoxqrwgo Ujrf

Condition: used, axle configuration: 3 axles, first registration: 09/2011, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,250 mm, total length: 13,900 mm, total width: 2,600 mm, total height: 2,650 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2011, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy wheels = Remarks = Number of axles: 3, Unladen weight: 2,550 kg, Kingpin size: 2 inch, Alloy wheels, Suspension type: Full air, ABS, EBS, Year of superstructure: 2011, Side wall material: Tarpaulin, Sliding roof, Axle type: SAF = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tyre tread left: 13 mm; Tyre tread right: 9 mm Axle 2: Tyre tread left: 5 mm; Tyre tread right: 5 mm Axle 3: Tyre tread left: 9 mm; Tyre tread right: 6 mm Weights Unladen weight: 2,550 kg Functional Sliding roof: Yes Environmental Emission class: Euro 0 Maintenance APK (Technical Inspection): valid until 03.2026 Condition General condition: Average Technical condition: Average Optical condition: Average Damages: None = Company Information = Prjdpjw Uc Rajfx Ah Ujf Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Competitive pricing • Professional sales operations • We speak many languages • We understand our customers • Support for import and transport • (Export) plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and our full stock list. Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 953,762 km, power: 324 kW (440.52 HP), first registration: 09/2013, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,460 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: steel-air, total length: 9,580 mm, total width: 2,550 mm, Year of construction: 2013, Equipment: AdBlue, central locking, cruise control, electric window regulation, onboard computer, parking heater, spoiler, = Additional Options and Equipment = - Rear work lights - Front work lights - Windscreen - Air suspension - Sleeper cab - Auxiliary heater - Pre-heating automatic system = Remarks = MAN TGX26.440 6x2*4 - 3 deck Livestock - Water & Ventilation + Jumbo/Bekkers 3 deck livestock trailer MY: 30-9-2013 / 29-7-2011 KM: 953,762 WMA18XZZ5EW188772 / XL9MV20RXBA006006 MAN 3-deck body with water supply & ventilation Trailer: 3 decks with ventilation Tail lift on truck and trailer Folding roofs Electric floors Manual gearbox Euro 5 Steering axle = Further Information = Technical Details Number of cylinders: 6 Engine displacement: 10,518 cc Axle Configuration Front axle: Max. axle load: 8,000 kg; Steering; Leaf suspension Rear axle 1: Twin tires; Max. axle load: 11,500 kg; Air suspension Rear axle 2: Lift axle; Max. axle load: 8,000 kg; Steering; Air suspension Weights Unladen weight: 12,585 kg Payload: 13,415 kg Gross vehicle weight: 26,000 kg Maintenance, History and Condition Periodic inspection (APK): valid until 11/2026 Prsdex Ndqlopfx Ah Usf Technical condition: good Visual condition: good Identification Registration number: 58-BDD-6 Additional Information Please contact VAEX The Truck Traders for more information.

Condition: excellent (used), Year of construction: 2014, Heat exchanger, construction heating, construction dryer, heating, hall heating, hot water exchanger, fan heater, heating, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -pure heat exchanger, only usable in conjunction with a heating unit (e.g. Wacker Neuson HP 252) -Type: HX 60 -Power: 43.5 kW Prsdpsghh Txefx Ah Uef -Quantity: 8 pieces available -Price per piece -Dimensions: 660/720/H1065 mm -Weight: 106 kg

Year of construction: 2017, condition: used, New: Yes Height: 235 cm Pedpfx Ahex I Dbze Uorf Cargo space capacity: 4.450 l Tyre size on axle 1: 560/60r22.5 Tyre size on axle rear: 560/60r22.5

Year of construction: 2022, condition: new, For sale is a hammer mill for the production of powdered goods in the spice / herb / food industry! Structure: 1 piece hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the rear wall 2 pieces flushing ports into the rotating part of the mill Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. In the lid an O-ring groove with silicone round cord Inside the housing a sieve basket with crusher, from the outside the sieve can fix Bottom centered an outlet with appropriate connection flanges Motor 400/680 volts; IP 54 2900 rpm at 50 Hz with 3 PTC thermistors. Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. sieve according to your choice 3 pcs. The rotor is also in V2A design, (beater with 96 platelets) Rotor can be turned 180°, in addition, the beater platelets can be turned 1 time. For this purpose, we recommend balancing after turning. 1 piece feeding screw for hammer mill with gear motor with 1,2 kW screw equipped with two cleaning balls at the hinged lid lid is equipped with lid switch and tumbler insertion hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for infinitely variable speed control speed display beater 3 PTC thermistor sensors as protection against overheating of the motor. Sensor for vibration protection Integration of cover switches Switch cabinet in stainless steel Emergency stop, main switch 1 piece Cooling or heating jacket on the rear wall of the mill housing Welded seams pickled and glass beads blasted on the outside. Steel parts, such as motor and motor console primed and painted according to RAL 1013. Attention: It must be ensured that no metal parts enter the mill! Total price of the plant described above price 145.000 € superstructure: 1 piece Hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the back wall 2 pieces of flushing connections into the rotating part of the mill. Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. In the lid an O-ring groove with silicone round cord In the inside of the housing a sieve basket with crusher, from the outside the sieve can be fixed At the bottom in the middle an outlet with a corresponding connection flange. Prsdpfopz H D Iox Ah Usf Motor 400/680 Volt; IP 54 2900 rpm at 50 Hz with 3 PTC thermistors. Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. screens of your choice 3 pieces rotors The rotor is also in V2A design, (beater with 96 plates) rotor can be rotated by 180 the beater plates can be turned 1 time. be turned. For this purpose, we recommend balancing after turning. 1 piece Feeding screw for hammer mill with gear motor with 1,2 kW Screw equipped with two cleaning balls on hinged lid lid is equipped with lid switch and tumbler feeding hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for stepless speed control speed indicator beater

Condition: ready for operation (used), Year of construction: 2006, material width 650 mm Prodpfxsx Ny A Rj Ah Uof coil weight 15 t material thickness 16 mm The year of construction is estimated, the system is as good as new

Condition: used, axle configuration: 3 axles, first registration: 09/2011, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,430 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2011, Equipment: ABS, = Additional Options and Equipment = - EBS (Electronic Braking System) - Alloy rims = Notes = Number of axles: 3, Unladen weight: 7,190 kg, Gross weight: 39,000 kg, Kingpin size: 2 inch, Alloy rims, Suspension type: Full air suspension, ABS, EBS, Side wall material: Tarpaulin, Sliding roof, Axle type: SAF = More Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 5 mm; Tyre tread right: 3 mm Axle 2: Tyre tread left: 5 mm; Tyre tread right: 2 mm Axle 3: Tyre tread left: 4 mm; Tyre tread right: 9 mm Weights Kerb weight: 7,190 kg Payload: 31,810 kg Gross vehicle weight: 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Condition Overall condition: Average Technical condition: Average Visual condition: Average Damages: None = Company Information = Kleyn Trucks is one of the world’s largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, model years, and price classes. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognisable quality • Competitive prices • Trustworthy business practices • Multilingual service • Customer-oriented approach • Assistance with import and transport • (Export) number plates arranged quickly • Professional technical services • The security of ‘recognisable quality’ • And much more… Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an enquiry via our website. Prjdpfx Aow Ibmtoh Uof Ask directly about our European warranty package.

Condition: excellent (used), mileage: 84,000 km, power: 3,244 kW (4,410.61 HP), first registration: 04/2008, fuel type: diesel, axle configuration: 4x4, fuel: diesel, gearing type: automatic, emission class: euro5, suspension: steel, Year of construction: 2008, Equipment: ABS, air conditioning, all wheel drive, differential lock, = Additional options and accessories = - Leaf spring suspension - Electric windows - Air-suspended seats - Air horn - Rotating beacon - Power take-off (PTO) = Remarks = 4x4 6000-liter water tank Side pump 3000 liters/min Winch = Further information = General information Cab: double Technical information Prsdpfox Hilcjx Ah Usf Number of cylinders: 6 Drivetrain AdBlue system: Yes Axle configuration Suspension: leaf spring suspension Front axle: differential lock; steered; tire tread left: 80%; tire tread right: 80%; reduction: hub reduction axles Rear axle: differential lock; tire tread left: 80%; tire tread right: 80%; reduction: hub reduction axles Dimensions and weights Gross vehicle weight (GVW): 19,000 kg Dimensions (L x W x H): 750 x 248 x 330 cm Condition Technical condition: very good Optical condition: very good Further information Please contact Andre, Henri, or Andre for more information.

Condition: good (used), Pipe heating device, pipe burner, pipeline construction burner Pjdpfxsb A Ix Ss Ah Uerf -Max. diameter: 250 mm -Burner for steel pipeline construction -Propane -Transport crate -Dimensions: 600/1400/H330 mm -Weight: 90 kg

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2011, loading space length: 13,542 mm, loading space width: 2,489 mm, loading space height: 2,712 mm, * Edscha sliding roof * Coil trough * Lift axle Prsdpex I Uxwefx Ah Ujf * SAF axles * Disc brakes * Unladen weight: 7,680 kg -----Internal vehicle number: 11558----Subject to errors and prior sale.

Condition: used, Dimensions (LxBxH): 135 x 55 x 102 cm Boe-Therm Temp 300 – Oil Heating Unit Serial number: 83054 Type: Temp 300-36-4 VE General Data - Medium: Thermal oil - Oil capacity: 98 liters - Max. temperature: 300 °C - Heating capacity (kW): 36 kW - Voltage: 3 x 400 V / 24 V - Frequency: 50 Hz - Power consumption: approx. 54.8 A - Control system: Electronic panel with digital display and control buttons - Safety features: Overtemperature, oil level, and pressure monitoring Applications - Temperature control in plastics industry (injection moulding, extrusion) - Metal processing (heating systems, forming presses) - Woodworking (veneer presses, laminating presses) Psdexpva Ajpfx Ah Uorf - Other processes requiring stable and high temperatures Function The unit heats thermal oil and circulates it through external circuits (such as moulds, press plates, or installations). This ensures a constant temperature up to 300 °C, with high precision and reliability. - Documentation available: No - CE certificate present: No - Serial number: 83054 - Transport dimensions: 1350mm x 550mm x 1020mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), ApenGroup LRP28DE Gas-Fired Warm Air Generator Gas Type: G20 Natural Gas Connection Pressure: 20 mbar Nominal Heat Input QN: 27 kW Nominal Heat Output: 24.63 kW Connection Voltage: 230V 1N, 50Hz Airflow: 2700 m³/h Psdpfx Ahex Ihlko Uerf Protection Class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request! Psdpfxox Ihiij Ah Usrf

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. Predpfxsx Ihg Io Ah Uof REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Prodpfx Ahjx Ig Tto Uef Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-4E Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!