Used Hebrock Edgebander for sale (49)

Condition: new, Year of construction: 2025, Hebrock F 4 For complete processing of your panels For all those who don't want to do things by halves. With the F 4, we offer you a model with which you can produce fully processed edges on a machine length of just 4 m. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 7 m/min. Ready for operation approx. 3.5 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Suction nozzle Ø 1 x 140 mm PLC control 10″ touchscreen Top-mounted rapid-heat adhesive container (maintenance-free) Support plate for edging material Automatic central lubrication (cross-cut saw, corner router) Visual display for workpiece sequence Extension arm (can be pulled out to the front) Interchangeable basin pre-equipment incl. adhesive changing device for PUR processing Surface scraper with dual tracing Phedpfxjhqadce Ah Usa Pneumatic roller capping (scissor cut design, Hebrock system) Double roller top pressure (ball bearing) Transport chain with bolted special chain plates Jointing cutter Milling unit cross-cut saw Corner cutter Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2459, Machine in very good condition - Very user-friendly control panel - Minimum workpiece width approx. 80 mm - Minimum workpiece length approx. 200 mm - Feed rate approx. 10 m/min - Transport chain with firmly bolted special chain plates - Double roller top pressure Phjdpfx Ahjx Ahmuj Uea - Machine length 4,300 mm - Machine width 1,400 mm - Weight approx. 1,250 kg - Extendable workpiece support at the front - Automatic central lubrication for cross-cut saw & corner milling unit - Melt glue container with Teflon coating (very low maintenance) - Ready for operation after approx. 5-6 minutes - Jointing unit - Pneumatic trim roller cutter - Direct glue application to the workpiece - Trimming unit for front & rear edges - Flush/chamfer/radius milling unit - Corner rounding - Surface scraper with dual sensing

Condition: new, Hebrock Model F 2 next Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special offer price and full manufacturer warranty. The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm milling depth), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Phjdpfx Asl D Rp Eoh Uja Equipment: Edge banding machine F2 next With PLC control (incl. touch screen) Hot melt glue application to the workpiece for edgebanding material up to 3 mm jointing cutter (incl. slide - tool) up to 2 mm milling depth maintenance-free glue basin with change basin pre-equipment incl. glue discharge device HF crosscut saw station (approx. 12000 rpm) HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version) robust chain drive ball bearing mounted double roller top pressure viewing window from rear side of machine extractable workpiece support Including special equipment: F2/12 surface scraper (incl. pneum. lift) F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling) F2/27 Nesting for milling stations

Condition: used, Year of construction: 2007, machine/vehicle number: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Used Machine GM020.0068 AKV 3003 DK - F Year of manufacture: 2007 Specification: 3 mm 1st milling station: Combination Surface pull scraper with extraction Chassis Phjdpfx Ahew Nih Ie Uoa Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: used, Hebrock AKV 3005 edge bander, well-equipped, can be tested before purchase, Liquids before milling units, Pre-milling cutters, Glue application with roller, equipped with glue drain, Second glue pot included, pneumatic pre-cut guillotine, pressure rollers, final trim saw, milling unit top/bottom, R1 – R2 pneumatically adjustable, profile scraper, corner rounding unit, Pjdpsw I Sp Sefx Ah Uoha liquids before scraper, flat scraper, polisher, max edge tape thickness in roll: 3mm, max edge thickness for lipping: 12mm, machine in very good condition.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 3074, feed rate Y-axis: 10 m/min, total length: 4,984 mm, workpiece height (max.): 60 mm, total width: 1,425 mm, edge thickness (max.): 3 mm, total height: 1,618 mm, overall weight: 1,400 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, extraction nozzle diameter: 140 mm, working height: 888 mm, input current: 32 A, input frequency: 50 Hz, extraction connection diameter: 140 mm, year of last overhaul: 2025, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. Pjdexlr S Hepfx Ah Usha The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper - Polishing wheel Price does not include VAT.

Condition: new, Year of construction: 2025, The Hebrock K 36 Top equipment with motorized adjustment - Exhibition piece - New machine - - immediately available - This Hebrock endurance racer offers unimagined possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in daily use. With the option of equipping the machine with a step cutter and a multi-radius scraper, Hebrock is setting new standards in the field of perfect edge processing of various edge thicknesses. max. edge thickness: 3 mm max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 60 mm Min. workpiece length approx. 140 mm Feed speed approx. 15 m/min. Ready for operation approx. 6 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 5250 x 1230 x 1430 mm (LxWxH) Weight 1750 kg Equipment: Hebrock K 36 - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touch screen), hot melt adhesive application to the workpiece workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 3 mm routing depth, maintenance-free, coated glue tray with HF double-motor cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with pneumatic trimming adjustment and interchangeable panel trimmer (combi version), corner rounding trimmer, radius scraper, surface scraper (incl. cleaning station, robust chain drive, ball-bearing mounted double roller top pressure, unit viewing window from the rear of the machine and operator side, signal lamp for workpiece sequence, extendable workpiece support, feed approx. 15 m. support, feed rate approx. 15 m/min, gluing up to 60 mm workpiece thickness 36/08/1 Quick-change equipment for corner router 36/08/2/1 additional exchangeable motor corner router R=1 36/09/1 Multi-radius scraper 36/24/1 Release agent spraying device Phjdpfxsi Am Uke Ah Usa 36/24/2 Cleaning agent spraying device 36/25 Protective spraying edge 36/27 Nesting (1x milling station + 1 x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/bevel) 36/45 Axis package Motorized adjustment of panel, edge thickness and joint milling depth jointing depth adjustment Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2024, operating hours: 650 h, Edge Banding Machine with PLC control system (incl. 15“ touch screen) and glue application to the workpiece for edge band material up to 3 mm: pre-milling (DIA-tools incl.) up to max. 3 mm milling depth, maintenance-free and coated quick heating pot with preliminary setup for change over quick heating pot (incl. hot-melt glue changing device), HF-trim saw station (approx. 12,000 rpm),HF-milling station (approx. 12,000 rpm) with pneum. milling adjustment, 2nd HF-milling station (approx. 12,000 rpm, incl. pneum. disengagement), corner rounding unit1), radius profile scraper, surface scraper (incl. pneum. disengagement), cleaning station, groove saw (incl. pneum. disengagement), robust chain drive, double roller top pressure (ball bearing supported), windows for aggregates from machine back side and operator side, indicating lamp for workpiece sequence, extensible support bar to the front, band feed approx. 15 m/min, gluing up to 60 mm workpiece thickness. Optional things installed on the machine Quick change device for corner rounding Multi-Radiusscraper (R2/R1) Heatable infeed fence Wheels Release agent spraying unit (spraying workpiece) Cleaning agent spraying unit (spraying workpiece) Protection spraying edge Nesting Pneumatic 3-point adjustment Multiool for HF-milling station Airtronic (up tp 40 mm workpiece thickness) Axis package (motor driven adjustments of height, edge and premilling) Glue pot suction hood The machine is on stock! Phsdpfxexn Nvbe Ah Uoa

Condition: ready for operation (used), functionality: fully functional, overall weight: 800 kg, working height: 870 mm, power: 11 kW (14.96 HP), workpiece width (max.): 70 mm, Technical data: max. edge thickness: 5mm / 8mm max. workpiece height: approx. 40mm / 50mm min. workpiece height: approx. 250mm / 300mm min. Workpiece width: approx. 70mm Feed speed: approx. 11m/min Ready for operation: approx. 4.5 min Power consumption: approx. 11kW Electrical connection: 230/400V / 50/60 Hz Work table height: 870mm Dimensions (LxWxH): 4100x1400x1300mm Psdpfx Ahoug Uqaj Uoha Condition and details see pictures

Condition: used, Year of construction: 2005, machine/vehicle number: Werksüberarbeitungsnummer: WÜA920DK-F12960, Used machine GM020.0029 Year of manufacture: 2005 AKV 3005 DK-F 8 mm version 1st milling station: Combination Cleaning station Corner rounding cutter Jointing cutter Surface scraper with extraction Profile scraper Chassis Pneumatic milling adjustment SPS control Pedpfow In R Eox Ah Uoha Preparation for interchangeable tanks

Condition: excellent (used), Hebrock F4 Edgebander Well-equipped, possibility to inspect before purchase. Pre-milling cutters, Glue application by roller, Equipped with glue drain, Interchangeable glue pot Pjdpfxoxq A Ebs Ah Usha Pneumatic pre-cut guillotine, Pressure rollers, Trimming saw for final cut, Top and bottom milling unit, R1–R2 pneumatically adjustable, Profile scraper, Corner rounding unit, pneumatically adjustable, Flat scraper, Max workpiece height: 50 mm, Max edge band thickness in roll: 3 mm, Feed speed: 7 m/min, Power requirement: 7.4 kW, Machine inspected, ready for testing, in very good condition. Only 5,000 meters of use. Leasing purchase possible.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Edge banding machine with jointing cutter (incl. DIA tool), with PLC control (incl. touch screen) with hot-melt glue application to the workpiece for edgebanding material up to 3 mm: maintenance-free, coated gluing bowl with exchangeable bowl preparation, HF cross-cut saw station (approx. 16,000 rpm) for front and rear edge overhang, HF trimming station (approx. 16,000 rpm) with exchangeable panel trimmer (combination version), router fine adjustment from the operator's side (Hebrock system), Corner rounding cutter (minimum workpiece length 300 mm, max. workpiece thickness 40 mm), surface scraper incl. pneumatic lifting, robust chain drive, double roller top pressure, unit viewing window from the machine rear and operator side, extendable workpiece workpiece support, feed approx. 10 m/min, 60 mm workpiece thickness, Psdsl H E H Hjpfx Ah Usha incl. 1x exchangeable basin incl. chassis

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper Pedpfxei Anadj Ah Ueha F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: ex stock 54634 Bitburg Available in calendar weeks: 4/2024

Condition: new, Year of construction: 2025, HEBROCK Edge Bander F2 next with SPS control system (incl. touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm: pre-milling unit (incl. DIA tool) up to 2 mm milling depth, maintenance-free glue pot with preparation for interchangeable tank incl. glue discharge device, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter head (combi version), robust chain drive, double roller upper pressure with ball bearings, inspection window on the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Phjdpjwmdbrsfx Ah Uoa Including: F2/500/10 Whispercut pre-milling head F2/500/20 Combination milling head F2/500/2 Radius cutter R=2mm F2/12 Surface scraper (incl. pneumatic lift)

Year of construction: 1998, condition: ready for operation (used), A right-sided Hebrock edge banding machine is available. Workpiece thickness range: 10mm-50mm, min. workpiece width: 70mm, min. workpiece length: 250mm, edge thickness (roll material): 0.5mm-5mm, max. edge height: 55mm, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 3000mm/1500mm/1300mm, weight: approx. 700kg. On-site inspection is possible. Psdpfx Asw A R S Noh Ujha

Condition: new, 3 mm Phodpfevwd Uuox Ah Uoa Total length 4122 mm Feed speed 10 m/min. with PLC control (incl. touchscreen) and hot-melt adhesive application to the workpiece foredgebanding material up to 3 mmjointing cutter (incl. DIA tool) up to 2 mm cutter depth1),maintenance-free glue tray with change tray pre-equipment incl. adhesive discharge device,HF cross-cut saw station (approx. 12,000 rpm),HF trimming station (approx. 12,000 rpm) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter,surface scraper (incl. pneumatic discharge device) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter) with separate pneumatic routing adjustment andinterchangeable plate router (combi version),corner rounding router,surface scraper (incl. pneumatic lift-out),free space (for cleaning station or radius scraper),robust chain drive,ball bearing mounted double roller top pressure,viewing window from rear of machine,pull-out workpiece support,feed rate approx. 10 m/. No. F4/00/11- Joining head WhispercutF4/500/10- Combination milling headF4/500/20- Radius milling cutter R=2mmF4/500/2- Radius corner milling cutter R=2mmF4/08/2- Quick-change equipment for corner milling cutterF4/08/4- Radius scraper (incl. F4/09- Radius radius scraper R=2mmF4/09/2- ChassisF4/10- Pneumatic 3-point adjustment(radius, chamfer, flush milling)F4/30

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Technical data: Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Phjdpfx Ahju Racxo Uja Weight: approx. 95 kg. Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Stock no: 2002311BXA

Condition: new, Year of construction: 2025, Edge Banding Machine F5 Psdpfx Aheh Hl Aye Ujha with PLC control (incl. 15" touchscreen), hot melt adhesive application to the workpiece for edge materials up to 3 mm: Joint trimming unit (incl. DIA tool) up to 2 mm trimming depth, maintenance-free glue pot with changeable pot setup, incl. adhesive discharge device, HF milling station with pneumatic adjustment, incl. corner rounding unit, radius scraper, surface scraper (incl. pneumatic lifting device), cleaning station, jointing head Whispercut, combination milling head, radius milling cutter R=2mm, radius corner milling cutter R=2mm, quick-change system for corner milling cutter, radius changeover motor R=1mm, multi-radius scraper R1/R2, undercarriage, spraying device for separating agent (PUR), spraying device for cleaning agent (PUR), pneumatic 3-point adjustment, LED lighting, INCLUDES 2nd interchangeable glue pot, max. edge thickness 3mm, workpiece thickness 8-50mm, min. workpiece length approx. 160mm, feed speed 10m/min, ready for operation in approx. 3.5 min, dimensions approx. 4300x1300x1400mm (LxWxH), weight approx. 900kg, extraction nozzle 1 x 140mm

Condition: good (used), Year of construction: 2003, I sell the radius milling machine HEBROCK HFF08, Year 2003. Suitable for curved shaped edges Good condition, possible to test ! Possible to buy also the Radius edge banding machine AKV88D. Pjdpfxowun H Us Ah Ujha

Condition: new, Year of construction: 2022, functionality: fully functional, Edgebanding machine Hebrock F5 equipped with a PLC control system. It features a maintenance-free, coated rapid-heating glue pot, with pre-set configuration for quick pot changeovers. - 10” touchscreen display - Maximum edge thickness: 3 mm - Minimum workpiece length: 160 mm - Feed speed: 7 m/min - Ready for operation in approx. 3.5 min - Maximum power consumption: 7.4 kW - Electrical connection: 400V / 3-phase / 50Hz - Table height: 900 mm - Machine dimensions: 4300 x 1300 x 1400 mm - Approximate weight: 900 kg Phjdpfewyu Rwex Ah Uoa Options/Extras: • Whispercut pre-milling unit, workpiece height up to 50 mm • Combi cutter head • Corner rounding radius: R = 2 mm • Radius corner rounding: R = 2 mm • Quick change system for corner rounding motor • Multi-radius scraper R2/R1 • Release agent spraying unit • Cleaning agent spraying unit • Edge protection spraying unit • Nesting function for milling unit and radius profile scraper • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Integrated LED workspace lighting

Condition: used, Year of construction: 1994, for pre-coated edges including a lot of edge material with outriggers on both sides end cap station 3-roller feed Phjdpfx Aovwfzvsh Uoa used, good condition Make Hebrock Type AKV-83 Year of construction 1994 Edge band thickness 1.0 mm Workpiece height max. 50 mm Workpiece width min. 50 mm Workpiece length min. 170 mm Space requirement approx. 1700 mm x 690 mm x 500 mm Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition as seen, without guarantee and guarantee

Year of construction: 1995, condition: ready for operation (used), machine/vehicle number: 585, Brand: Hebrock Model: AKV 1000 V Machine no: 585 Year of manufacture: 1995 Tech. data: Edgeband thickness max: 3 mm Edgeband height max: 50 mm Max feed speed: 7.5 m/min With cutting knife Length of work table: 2200 mm Motor: 7 kW, 50 Hz, 230/400V, 3-phase Size for transport: Length: 220 cm Psdpfxsib H Slj Ah Uoha Width: 115 cm Height: 150 cm Stock no: 2001164BXM

Condition: good (used), Year of construction: 2002, I sell the edge banding machine HEBROCK AKV088D, Year 2002. Suitable for curved shaped edges Phedpfx Ahsvx D Aue Uja Good condition, possible to test ! Possible to buy also the Radius milling machine HFF08.

Condition: new, Year of construction: 2021, functionality: fully functional, Edgebanding machine Hebrock K36 featuring PLC control, a maintenance-free and coated quick-heating glue pot, including pre-setup for rapid glue pot changeover. - 10" touchscreen interface - Maximum edge thickness: 3 mm - Minimum workpiece length: 200 mm - Minimum workpiece width: 80 mm - Feed speed: 10 m/min - Ready for operation in approx. 5 min - Maximum power consumption: 14 kW - Electrical requirements: 400V / 3-phase / 50 Hz Psdpfx Ajwyu E Ueh Ueha - Machine dimensions (LxWxH): 5250 x 1230 x 1430 mm - Approximate weight: 1700 kg Additional Equipment/Options: • Whispercut pre-milling cutter, 60 mm workpiece height • Heatable infeed fence • Radius unit for corner rounding, R = 2 mm • Quick-change device for corner rounding motor • Multi-radius scraper (R2/R1) • Corner rounding for 60 mm workpiece height • Release agent spray unit • Cleaning agent spray unit • Edge protection spray system • Nesting package • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Interior LED lighting • Equipment for short parts processing • Preparation for return system (barbaric) • Axis package: motorized adjustment of height, edging, and pre-milling units • Additional workpiece infeed and outfeed supports (each 450 mm)