Used Helmet Profile for sale (5,580)

Condition: good (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamp sleeve, sliding gate sleeve, helmet rail branch -Manufacturer: Helmet, branch for helmet rail -Type: Width 65 mm -Dimensions: see photos -Number: 1x branch available -Transport dimensions: 960/390/H90 mm Bsdpfx Aaewx E Dxjcoww -Weight: 9.9 kg

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 bottom shaft 30 mm top shaft 35 mm two rollers driven with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph. Bwsdpfxed S Uf Ss Aacsw

Condition: good (used), Brand Ercolina Bwjdpfxew Hx Tve Aacjw Model CE40H3 Year of manufacture 2006 Hydraulic drive Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Power 1.85 kW Bending speed 10 rpm.

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 4,500 kg, Double pallet fork ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Bedpsw E Ulxjfx Aaceww Technical condition: good Description: Year 2019 ISO 4A (51 cm) Capacity 4,500 kg Sideshift Opening range 560-2,760 mm Width 1,980 mm Forks 1,150 mm ID OS1716

Condition: new, functionality: fully functional, Year of construction: 2024, shaft diameter: 50 mm, roller diameter: 155 mm, overall weight: 400 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Capacity (kW): 1.5 Voltage: 400 Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (kg) approx.: 400 Units in stock: 4 Manufactured in: Turkey Ø Diameter (mm): 50 Bwjdpfx Ajwt Sy Ajacsw Comments: Unused machines at competitive prices, multiple units in stock, foot pedal included.

Condition: good (used), profile bending machine Bwodjwtph Depfx Aacjw

Condition: excellent (used), Pipe and profile bending machine TAURING SAF BS50 Number of rollers: 3 Feed speed: 3 m/min Motor power: 2.2 kW Bodpfsxcn Hnjx Aacjww

Condition: new, Year of construction: 2024, Ring Rolling machine ZOPF - model ZB 30/3 H (without basement) TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout programmable - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - hydraulic motor 0,55 kw - adjusting way: 35 mm Bwjdjgh T Iaepfx Aacow - weight: 110 kg - dimensions: 530x420x500 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 150 h, excellent condition BIRLIK PBM 35 profile bending machine, pipe bending machine for sale manufacturer BIRLIK Makina type: PBM 35 year of manufacture: 2007 Shaft diameters: 50mm Roll diameters: 155mm Upper roller diameter: 148mm Working speed: 4.5m/min Motor power: 1.5kw Voltage: 3phase 380v 50Hz 3.8A Machine width: 700mm Machine length: 900mm Machine height: 1400mm Machine weight: 375kg Bending capacity: Bodpfx Aaoxc N Rhecoww I-steel - flat 120 x 15 (d 750) mm I-steel - on the edge 60 x 10 (d 800) mm Angle steel 50 x 5 (d 1200) mm Round material 35.0 (d 800) mm Max. pipe diameter 70 x 2 (d 1200) mm Square material 50 x 40 x 3 mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC Thread, Gear, and Profile Rolling Machine Model ROLLEX 1 Substructure: The substructure of the thread and profile rolling machine consists of welded steel profiles, partially covered with sheet metal. The space for the process lubricant reservoir is located in the front area of the substructure. Main drive: The main drive generates the rotary motion of the rolling tools required for gear rolling. The drive motor is flanged to the base plate of the rolling spindle bearing via the Cyclo Drive gearbox. The rotary motion is transmitted to the rolling spindle via the Schmidt coupling. The machine operates in a speed range of 0 to 30 rpm, with this range further subdivided into 0 to 20 rpm for continuous operation (S1) and 20 to 30 rpm for intermittent operation (S4). The speed is continuously adjustable using a frequency converter. Brand PROFIROLL Type ROLLEX 1 Year of manufacture 2003 Control, Brand, Type Siemens, Sinumerik, 840D Motor power (kW): 18 kW Electrical connection: 400 V Rolling range: Max. rollable workpiece diameter: 40 mm Bedpfx Asv Uxq Soaceww Rolling carriage stroke: 2 x 80 mm Min. / max. center distance of rolling spindles: 160 / 320 mm Rolling spindle height above the machine bed: 160 mm Max. tool diameter: 250 mm Rolling spindle mounting diameter: 120 mm Rolling spindle mounting length: 80 mm Power & Drive Max. rolling force: 100 kN Rolling spindle speed, continuously variable 0-30 rpm Motors Rolling spindle drive: 2 x 13 Nm Hydraulics 50 Hz: 5.5 kW Process lubrication 50 Hz: 0.1 kW Central lubrication 50 Hz: 0.06 kW Temperature range: +5–+40 °C Current type/frequency: 3 N/50 Hz Nominal voltage: 400 V Control voltage: 24 V Auxiliary voltage: 24 V/230 V Connected load: 18 kW Nominal current of the machine: 39 A

Condition: used, Profile projector ISOMA Bsdpsxbt H Dsfx Aaceww

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Machine in excellent condition!! Standard specification: Bedper Ddurjfx Aacoww welded steel construction 3 drive rollers horizontal and vertical working position shafts made of improved special steels digital reading portable control panel work instructions Optional equipment: Technical data: shaft diameter: Ø100 mm roller diameter: Ø315 mm working speed: 7 m/min engine power: 7.5 kW machine length: 2000 mm machine width: 1450 mm machine height: 1700 mm machine weight: 3650 kg

Condition: good (used), Year of construction: 1999, Manufacturer: Tauring Type: DELTA 50 CNC Control: TAURING CNC-S Year of manufacture: 1999 Shaft length 115 mm Max roll diameter 175 mm CNC-C means Computerised Compact Numerical Control. Thanks to the small size offered by the most modern technology and a competitive price it has been possible to obtain a powerful, reliable and suitable product. Tauring bending machines can be equipped with this device, which gives the possibility to realise any shape of regular and irregular geometrical bending. The machine equipped with the CNC-C device executes automatically and in only one pass up to 30 program steps (in the same bar 30 bends of different radius), by simply setting the radius and length in mm of each segment composing the shape. Bwedowp Idvspfx Aacjw Specifications Metric US Standard Horizontal and Vertical H+V Axis Ø 115 mm Number of rolls 3 Control TAURING CNC-S Dimensions (estimate) Length 1400 mm Width 1400 mm Height 1400 mm Weight 780 kg Please note: The information on this page has been obtained to the best of our knowledge and belief by us, and where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not represent any warranty or contractual terms. We recommend that you check all essential details.

Condition: new, Year of construction: 2024, Bending machine ZB 70/3 H NC Zopf - semiautomatic Bodpfxefkz Rbe Aaceww - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 155 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 105 mm, input voltage: 110 V, type of input current: AC, table length: 405 mm, input current: 3 A, table width: 155 mm, Equipment: lighting, Mitutoyo PH-350H Profile Projector Part Number: 172-101-4 Serial Number: 70174 SPECIFICATIONS: Screen Size….35.5 cm Table Surface (3 T-Slots)15.5 cm x 40.5 cm X-Axis Travel…15.5 cm Y-Axis Travel…10.5 cm Z-Axis Travel…10.5 cm Bwodpowr Uvqjfx Aacjw Table Rotation….+/- 10 degrees Projection Type….Horizontal Table Load Capacity – Maximum…40 kg Surface Illumination.150 W Halogen Lamp Electrical System…110 V/50 Hz/3 Amps Comparator Dimensions 76 cm L X 122 cm W X 117 cm H Cabinet Dimensions 51 cm L X 122 cm W X 45 cm H

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: AR200, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG, controller model: EVO, number of rollers: 3, shaft diameter: 200 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 5 rpm, power: 29.42 kW (40.00 HP), input voltage: 400 V, type of input current: three-phase, operating pressure: 240 bar, Equipment: CE marking, documentation/manual, emergency stop, hardened rollers, Profile bending machine model AR200 brand MG srl year 2016 Machine in perfect condition, very little use Capacity chart of the machine in enclosed. Model AR200 Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic with gear unit each shaft side arms hydraulic move in 3 direction for keeping guided the profile being formed. NR. 2 set of rollers with the machine for pipe bending SIZE 159MM - SIZE 139,7 MM -Control panel console CNC programmable with automatic rolling, touch screen 15” , display the 9 axis of the machine with readout for manual use and fully programmable automatic forming Bodpfx Aoxb Ecweacsww -Electric power supply 3phase 400/50 Vac -40HP -Service manuals and operation books original. Additional set of rollers and tooling for specific application can be provided upon request Bending for HEB - IPE -UNP - ANGLE – T -SECTION- TUBULAR- IRON BAR ON EDGE -ETC..

Condition: used, Profile Grinder WICKMAN OPG Bwedpfx Aaoxbt Dpscsw

Year of construction: 2006, condition: good (used), 3-axis / 5-sided machining with ISOLA soundproof cabin for aluminum, PVC and steel profile bars The machine has two processing zones and 2 tool magazines, which can be used individually in pendulum mode or both together for loading over the entire processing length (multi-part operation). The clamps can be positioned on the left and right independently of the processing head. Travel paths: X - axis: 7000mm Y - axis: 300mm (+ 113mm of the movable work table) Z - axis: 350mm Bjdpfxetp Ucmj Aacsww P - axis: 3500mm (for left-hand clamp positioning) H - axis: 3500mm (for right-hand clamp positioning) 8 clamping elements (4 clamps per machining zone) 12 tool holders (6 holders per changer magazine/machining zone) incl. Camplus software 2 angle heads

Condition: good (used), Year of construction: 2009, Manufacturer: BAILEIGH Type: R-H 120 Control: Telemechanique Year of manufacture: 2009 Arm adjustable 330 mm Hydraulic side support Set of universal rolls Set of pipe rolls 88.9 mm Set of pipe rolls 60.3 mm Digital readout system position side rolls Horizontal & vertical operation possible Specifications Metric US Standard Horizontal and Vertical Horizontal & Vertical Axis Ø 100 mm Number of rolls 3 Horizontal Yes Vertical Yes Flat capacity 100 x 240 x 1600 mm Pipe capacity 139 x 4 x 3000 Ø x mm T-profile capacity 100 x 100 x 1000 mm Working speed 0 - 5500 mm/min. Adjustable side roller range 200 Upper roller pressing force 200 Bar Side support yes, 330 mm stroke Bjdjwpkwfepfx Aacoww Dimensions (approximate) Length 1800 mm Width 1600 mm Height 2000 mm Weight 2300 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details. Share on

Year of construction: 2019, condition: ready for operation (used), General Data Measurements width 700 mm Measurements depth 4000 mm Measurements height 1300 mm Machine weight 1500 kg This TFM GM-SB-38CNC-2A1S was manufactured in 2019. It features a max bending capacity of 38 × 2 mm, bending speeds up to 65 °/sec, and motor power of 4 kW. Ideal for precise bending with a max bending angle of 180° and effective length over mandrel of 3200 mm. Consider the opportunity to buy this TFM GM-SB-38CNC-2A1S profile bending machine. Contact us for more information. Application Types Rolling Bjdpow Uaiasfx Aaceww

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 252 mm, travel distance Y-axis: 152 mm, workpiece weight (max.): 40 kg, input voltage: 110 V, type of input current: AC, total height: 1,155 mm, total length: 1,137 mm, space requirement width: 467 mm, overall weight: 155 kg, table length: 450 mm, table width: 146 mm, Equipment: lighting, Mitutoyo PH3500 Profile Projector Used Mitutoyo PH3515F for sale in good condition. Manufacturer: Mitutoyo Type: PH3515F Built-in linear scale Magnification: 10x Display size: 353mm Digital angle measurement with 1' or 0.01° accuracy. Built-in linear scales for use with optional display counters. +/-0.1% or less (contour), +/-0.15% or less (surface) Working area range X-axis horizontal movement: 254 Y-axis vertical movement: 152 Table size: 450x146 mm Light source: Halogen bulb 24V 150W Suitable for thread pitch measurement – ​​No blurred or distorted image when the workpiece is tilted. Still image on the bright screen in the living room. Standard dual fiber optic illumination. 14" (353 mm) diameter protractor screen with crosshairs and stepped lines for easy alignment. Digital angle measurement with 1' or 0.01° accuracy. Durable workpiece table features linear scales for fast and accurate measurement. Height: 1155mm Bsdpewr U A Defx Aacjww Length: 1137mm Width: 467mm Weight: 155kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Automatic spacer bender WHS2 The automatic spacer bender machine WHS is suitable to bend aluminum and Warm Edge bars: Chromatech Ultra, TGI Spacer M, Thermix TX.N Plus, Thermobar, Multitech, Swisspacer Advance, Swisspacer Ultimate. It is possible to create square and rectangular, straight shapes like trapezium, triangle, pentagon and optionally are available curves and arcs shapes. The interface operations are done using a Personal Computer, the program is easy to use and allows the users to manage all the working parameters, as well as set up specific condition for different type of spacers. The program to optimize the work can optimize up to 1,200 different measures of work, considering the type and color of material used and width. The program can be interfaced with the most used optimization software of cutting tables (Perfect Cut, Optima, Albat-Wirsam, Hanic, etc). The program is available in Italian, English, French, Spanish, German. The machinery is equipped with tele-assistance and video-assistance. Technical features Workable spacers: H 6-7 mm; Aluminum / Chromatech Ultra / TGI Spacer M / Thermix TX.N Plus / Thermobar / Multitech / Swisspacer Advance / Swisspacer Ultimate 8-24 mm. Bedpfxev Epfue Aacjww Spacer frames min size: 200x280mm. Spacer frames max size: 1800x2450mm in one step (larger size in two steps) Bender dimension: L 4,850mm, W 2,040mm, H 2,550mm. Spacer stock dimension: L 5,500mm, W 1,300mm, H 1,650mm

Condition: excellent (used), functionality: fully functional, spindle diameter: 30 mm, overall weight: 950 kg, table length: 1,100 mm, table width: 850 mm, SPINDLE MOULDER IN EXCELLENT TECHNICAL AND VISUAL CONDITION Bedpfx Asxlyhceacjww TECHNICAL SPECIFICATIONS: - Tiltable spindle from -10 to 45 degrees - Quiet operation - Control panel operation - Polish manufacturer - Table dimensions: 110 x 85 cm - Carriage with spindle approach and height adjustment - Carriage dimensions: 90 x 40 cm - Material clamp - Spindle speeds: 3000/4500/6000/9000 rpm - Model: DFCB Jaroma - Extraction connection 140 mm and 80 mm - Spindle height adjustment - Original factory paintwork - Motor power: 4.5/5.9 kW - CE mark - Fully adjustable fence Machine dimensions: - Length: 3200 mm - Width: 1900 mm - Height: 1750 mm - Basic machine weight: 650 kg - Weight with full equipment: 950 kg Machine financing available via leasing or installments. Just visit our website: jbsmaszyny.pl You are welcome to test the machine. Where can you see our machines? JBS MASZYNY STOLARSKIE WOLICA DRUGA 26 23-310 MODLIBORZYCE Nationwide machine transport! Tel: 663 495 647 German Tel: 664 335 475 English Tel: 530 632 386 English

Condition: ready for operation (used), Year of construction: 1998, Travel X/Y/Z: 3200mm/300mm/250mm, speed: 18000rpm, motor power: 7.4kW, tool holder: SK30, tool positions: 8, tool changer: turret, materials processed: aluminum/steel (max. 5mm thick)/PVC (steel-reinforced and unreinforced), wood and plastics. Documentation available. On-site inspection is possible. Bwedpfxeuzlfas Aacjw

Condition: ready for operation (used), Mitutoyo PJ321F, projection lens: 10x/20x/50x/100x, projection screen: 315mm, material: finely ground glass, rotation range: +/-360°, angle display: digital, resolution: 0.01°, contour illumination: +/-0.1%. On-site inspection is possible. Bwodpfx Aswgnf Ujacow