Used Hole Punch for sale (4,613)

Year of construction: 2013, condition: used, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 In general: Drilling-ø (max.):3,5 mm Drilling depth (max.):200 mm Nwjdpfxsx E Ingj Aazel Deep drilling module: Technology:Drillingspindle Speed (max.):10.000 rpm Power:3,5 kW Taper:HSK-A40 Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Internal cooling unit with Filter and High-pressure, 140 bar Workpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140 Oilmistseparation:Electrostatic extraction, LTA AC 500 Further Accessory:Misc. Single lip driller

Condition: refurbished (used), 2-spindle deep hole drilling machine under retrofit, completely overhauled, like new after conversion. Nodpfx Aasx E U S Eezewl Technical Data Drilling system: ELB system Number of drilling spindles: 2 Min. drilling diameter: 1 mm Max. drilling diameter: 8 mm Max. drilling depth: 300 mm Nominal workpiece diameter range: 5–30 mm

Condition: reconditioned (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 7923278, type of input current: three-phase, total width: 2,440 mm, total length: 3,320 mm, total height: 2,130 mm, overall weight: 8,200 kg, input frequency: 50 Hz, input current: 30 A, nominal power: 7.5 kW (10.20 HP), rotational speed (max.): 4,600 rpm, rotational speed (min.): 1,500 rpm, space requirement width: 2,440 mm, 72x102 cm die cutter for thin paper and light carton up to 600 gsm. Exceptionally stable and very silent fast cylinder press. Floor anchoring is not necessary. Nwsdpex Hzm Sefx Aazol

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 363 kg, total length: 1,050 mm, total width: 1,040 mm, total height: 1,240 mm, number of drawers: 5, Directly from the manufacturer, the original from the patent holder Apfel GmbH. Also available in other sizes! Njdpfeuv Ecnox Aazjwl Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing: gentian blue structure (RAL 5010) Pull-outs : gray-white structure (RAL 9002) Payload per pull-out 900 kg Weight: approx. 363 kg Fully assembled as a set including 4 WKH 210 tool holders 4 tool holders WKH 211 4 tool holders WKH 212 4 tool holders WKH 213 2 tool holders WKH 214 2 tool holders WKH 215 3 tool insert plates WEB 360 2 tool inserts WEB 367

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, overall weight: 363 kg, total length: 1,050 mm, total width: 1,040 mm, total height: 1,240 mm, number of drawers: 5, !RETURNED KNIVES! Directly from the manufacturer, the original from the patent holder Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing: gentian blue structure (RAL 5010) Pull-outs : gray-white structure (RAL 9002) Nsdpfouv Edljx Aazswl Payload per pull-out 900 kg Product code: 94032080 Swiss commodity code: 9403.2010 Origin: DE/08 Weight: approx. 363 kg Completely assembled as a set including 4 tool holders WKH 210 4 tool holders WKH 211 4 tool holders WKH 212 4 tool holders WKH 213 2 tool holders WKH 214 2 tool holders WKH 215 3 tool insert plates WEB 360 2 tool inserts WEB 367

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 517 kg, total length: 1,050 mm, total width: 1,040 mm, total height: 2,140 mm, number of drawers: 5, Directly from the manufacturer, the original from the patent holder Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=2140 mm two-tone powder-coated Housing: gentian blue structure (RAL 5010) Pull-outs : gray-white structure (RAL 9002) Payload per pull-out 900 kg Product number: Swiss commodity code: Origin: DE/08 Weight: approx. 517 kg Fully assembled as a set including 6 tool holders WKH 210 6 tool holders WKH 211 5 tool holders WKH 212 5 tool holders WKH 213 4 tool holders WKH 214 4 tool holders WKH 215 Nwedpfjuv Emmox Aazol Dimensions: 1,040 w x 2,140 h x 1,050 t Unladen weight: 517 kg Structure powder-coated in Gentian blue RAL 5010 (body) and gray white RAL 9002 (pull-outs)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,460 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, total height: 2,850 mm, total length: 2,500 mm, total width: 2,400 mm, workpiece weight (max.): 6,000 kg, table width: 800 mm, overall weight: 6,000 kg, type of input current: three-phase, table length: 1,800 mm, drilling depth: 500 mm, Technical equipment -Automatic swivel head +-45 degrees -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator Nwodpfjvppxpjx Aazjl -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Year of construction: 2026, operating hours: 100 h, condition: new, functionality: fully functional, Maximum jumbo roll width: 450 mm Maximum jumbo roll diameter: 1000 mm Maximum rewinding diameter: 500 mm Nwedpfxovq I Nie Aazel One rotary die-cutting unit Die-cutting (roll-to-roll): 120 m/min Compatible with magnetic cylinders from 12" to approximately 24" Optional features not included in the offer price: Magnetic cylinder holder: Adaptable to existing die-cutting units. iKnife Automatic knife positioning system: Available as an additional option. Contact us. We will be happy to provide you with a detailed quotation.

Condition: excellent (used), functionality: fully functional, punching force: 110 t, Geka punching machine model Puma 110/E-500, punching power 110tm, hole capacity diameter 40 x20, neckline 500mm, in good condition and very equipped. Nwsdovdkprepfx Aazel

Condition: excellent (used), functionality: fully functional, drilling depth: 1,000 mm, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, travel distance Z-axis: 360 mm, spindle speed (max.): 4,200 rpm, drill diameter: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, spindle motor power: 10,000 W, table length: 700 mm, table width: 1,400 mm, table load: 4,000 kg, feed length W-axis: 500 mm, Selca S4040D CNC Control Drilling depth, transverse movement V axis: 1,000 mm Column, longitudinal movement X axis: 1,650 mm Drilling slide, vertical movement Y axis: 1,000 mm Drilling slide, workpiece support movement W axis: 500 mm Drilling slide, maximum vertical "swivel" - A axis: +20° / –20° Rapid traverse, adjustable speed up to 10,000 mm/min Drilling diameter in solid material min/max: 5 – 40 mm Drilling spindle, rotational speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 10 kW Fixed clamping table, dimensions: 700 x 1,400 mm Standard clamping slots: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill holder; shank for drills > 6 mm: 10 x 40 mm Gun drill holder; shank for drills < 6 mm: 25 x 70 mm Clamping table ROTARY & "BARRASENO" axis B Dimensions mm: 800 x 1,000 Standard clamping slots: 18 mm Maximum axial load (rotary): 4,000 kg Continuous rotary axis B resolution: 360,000 steps/rev Maximum vertical resolution "BARRASENO" axis B1: +20° / –20° Small milling head – threading, etc. Maximum horizontal working stroke Z axis (830): 360 mm Spindle speed, adjustable up to 2,200 rpm Nwedpfx Aasxpwf Tozsl Threading spindle motor power: 10 kW ISO40 tool changer with 10 rotary-translating stations USED MACHINE

Condition: excellent (used), Year of construction: 1986, plate thickness 5 mm Nwodpfx Aajxzk I Sozjl sheet width 40 mm

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: Nodpfx Ajwh Rp Ejazswl - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: W400-RM-016, type of input current: three-phase, overall weight: 1,700 kg, Zemat W-18-200 Roll Die Cutting Machine Nodpowcm Tisfx Aazjwl Working width 1800mm, 100mm gap between the rollers

Condition: used, functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 4 mm, cutting length (max.): 225 mm, Boschert Notching Machine Type LB14 Station 1 Nsdpfx Aewfymnoazjwl Fixed angle 90° Cutting length 225x225 mm Adjustable cutting length Cutting capacity 4 mm St40/ 3 mm V2A Station 2 Indentation cutting 100x25 mm Adjustable cutting length Used machine in very good condition Refurbished Built in 2000

Condition: used, Offer 41414 Nwjdpoxhfhmefx Aazsl Guide unit for punching tool suitable for AMADA type EMK 3612

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Max. punching force: 220 kN Max. sheet thickness: 6 mm MACHINE DETAILS Nwodsxhfnaopfx Aazol Dimensions & Weight Dimensions: 7,500 x 7,500 x 2,500 mm Approx. machine weight: 17,500 kg

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Nedjw E H E Repfx Aazjwl Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: good (used), Year of construction: 2000, functionality: fully functional, total length: 5,000 mm, total width: 4,000 mm, total height: 3,000 mm, overall weight: 7,500 kg, working width: 2,000 mm, punching force: 50 t, Working width: 2000 mm Punching head: 650 x 650 mm Punching head has mechanically adjustable low-point stops and can be rotated (with a digital counter for the punching depth to simplify adjustment) Punching pressure: 50 t Punching belt with automatic clamping jaw feed including oscillating belt Machine features a CNC control system Nedpfx Aewlu N Dsazjwl Unwinders are not included Punching machine runs smoothly and is still ready for use

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 620x560x1720 mm Weight 110 kg Nwjdpov A Hm Refx Aazol Total power requirement 0 kw

Condition: used, functionality: fully functional, --Punching machine Omes CH85 XS WORKING IN GOOD CONDITION. YEAR 1995. DIMENSIONS: 190X80X185 cm (h), 2100 KG Nwodpfxewn Hygo Aazsl --Punching machine Omes CH70 WORKING IN GOOD CONDITION. DIMENSIONS: 170X80X190 cm (h), 1700 KG

Condition: used, functionality: fully functional, PUNCHING MACHINE FICEP 604 N -Machine dimensions mm approx. 150x65X220 (H) cm, Weight kg 1500 -Power supply voltage 380 V 50 H -Motor power kW 7.5 -Punching force ton 60 Nwodjwn Hytopfx Aazsl -Max. hole of 32 mm executable on a thickness of mm 16 -Max. diameter with large hole equipment (optional) mm 100 -Working height mm 950 -Punch stroke mm From 0 to 40

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9174, total height: 3,400 mm, ram adjustment: 100 mm, installation height: 530 mm, total width: 2,150 mm, total length: 1,450 mm, pressing force: 100 t, clearance between the columns: 830 mm, overall weight: 15,000 kg, DGUV certified until: 01/2027, year of last overhaul: 2026, punching force: 100 t, The machine is completely overhauled and finished, including new Siemens S1500/MTP1000 press control. Nwsdpfxsx U Ucpe Aazjl Upright spacing: 830 mm Distance table to ram: 530 mm Stroke adjustment: 10 - 120 mm Ram adjustment: 100 mm Ram strokes/minute: 30-120 Delivery time: immediately Price on request

Condition: good (used), functionality: fully functional, Peddinghaus profile and punching machine with automatic stop Very well maintained Nwedpfoyg D Nnox Aazol Punching force 45 t Incl. various punching dies

Condition: good (used), functionality: fully functional, Boschert EL 300 The Boschert EL 300 is a manual punching machine with a punching force of 28 tons. Equipped with a Trumpf tool holder, dies up to size III (pitch circle 105 mm) can be installed. It offers continuous stroke, single stroke, and jog mode operation. In addition to the standard foot pedal, the punching stroke can also be activated via a two-hand control, which is particularly useful for workpieces where the acrylic shield must remain in the upper position (e.g., L-shaped brackets), allowing operation via the two-hand control. The integrated drawers are ideal for storing punching tools and accessories. Nwsdpfx Ajznu H Ssazjl The simple operation and quick tool change make this machine accessible to everyone.

Condition: good (used), functionality: fully functional, Boschert Compact Rotation 1000x2000 Equipped with the Trumpf tool system and featuring the Boschert rotation, which enables continuous 360° rotation of the punching tool up to tool size III. Punching force: 28 tons. Spray device. Chip extraction system. Njdsznu T Espfx Aazjwl