Used Holzher 1265 for sale (185)

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: refurbished by Holz-Her specialist Equipment and technical data: - Basic machine with manual adjustment of the pressure beam - Extendable workpiece support, distance: 600 mm - Edge milling unit FG 201 with 2 milling heads including diamond milling cutters 70 x 48 x 30 mm, Z 2 - Edge feeder 1903, single infeed, automatic transport of roll and strip material - Gluing system Glu Jet GJ 301 with automatic glue height adjustment (sensing nozzle) - With magazine for glue cartridges - Pressing unit 1912-3, pneumatic, first roller driven with pneumatic immersion control - Cross-cutting unit 1918, pneumatically swiveling 0-10 degrees - Multi-function milling unit 1827 MOT 4 with pneumatic package including diamond milling cutters - Profile milling unit 1832 for corner copying with radius milling cutter - Scraper blade unit 1929 MOT 2 - Chip collection box - Surface scraper blade FK 701 - Buffing unit 1940 - Minimum workpiece length (mm) 160 Fgsdpfx Aozk N U Aohped - Workpiece thickness (mm) 6-60 - Edge thickness (mm) 0.4-6 - Feed rate (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420 Availability: short notice Location: 63934 Röllbach Well maintained

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data Cutting length: 5300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Extraction: - Saw unit 120 mm - Frame 100 mm Workpiece support: - Stable plastic support for optimal stability, even for narrow workpieces. - Chips are removed via angled slots. Roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Fedpfezk N S Ijx Ahpsgd Circular saw blade: Carbide-tipped, 250 mm, hollow-tooth, Z48 Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding rail: incl. workpiece support for narrow parts (5 fields) with strip stop with Supercut pre-scoring device Extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: short-term Storage location: 63934 Röllbach in accordance with its age

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Condition: Guide rail slightly worn, suitable only for rough cutting Equipment and technical data: - Cutting length: 4300 mm - Max. feed height: 2200 mm Fedpfszk N Hxex Ahpogd - Max. trimming height: 2100 mm - Max. vertical scoring height: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4500 rpm - Saw blade diameter: 300 mm - Dust extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 Availability: short-term Location: Flörsheim in accordance with age

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Equipment and technical data: Machine with PLC control Feed rate 12/16 m/min Edge feeder for coil and strip material, automatic 1901 Glue application cartridge 1906 with sensing nozzle Printing unit, pneumatic, with motorized adjustment to edge thickness 1926 Cutting unit, 2-motor, pneumatically pivoting 1918 Milling unit, fixed, up to 30 mm 1962 Milling unit MOT 5 with multi-function capability for flush, radius, and bevel trimming 1966 Radius trimming blade 1927 Corner copying 1983 Surface trimming blade 1964 Chamfering unit 1944 Air nozzles Technical data: Workpiece thickness min./max.: 6/60 mm Workpiece width min. 60 mm Workpiece length min. 140 mm Edge band thickness max. 13 mm Weight: 1350 kg Fsdpfxozk N Hrs Ahpegd Machine dimensions: 5850 x 1000 x 1750 mm Location: Röllbach Availability: short notice Well-maintained

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: - Base machine 555 - Machining dimensions for contour milling: - X = 3514 mm - Y = 1544 mm - Maximum machining dimensions: - X = 3868 mm - Y = 1746 mm - Z = 325 mm - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm spacing - 12 in the X-axis and 6 in the Y-axis - Individually selectable - Arrangement in a T-shape - Max. drilling diameter 35 mm (depending on plate thickness) - Spindle extension stroke: 70 mm - Rotation direction: alternating clockwise/counterclockwise - n = 4725 rpm, continuously adjustable - 2 horizontal drilling units in the X-direction, 1 horizontal drilling unit in the Y-direction - Sawing unit 7946: - Motor: 3.5 kW - 90° pneumatically swiveling - n = 5300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in X and Y directions - Milling unit 7935: - with 6 kW spindle, water-cooled Fgjdozk N Hljpfx Ahpod - Milling unit 7982: - for mortise milling - Tool changer 7996: - 18-position magazine (turret) - Vacuum pump with 140 m³/h - Handheld control unit - PC control with TwinCAM WOP system - Control system: Siemens Availability: short-term Location: 63934 Röllbach Condition: commensurate with age

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - Control system with 15-inch touch screen - Edge trimming unit with 2 milling heads - Edge feed system - GluJet 301 adhesive application system: 2.3 kW, automatic glue height adjustment, sensing nozzle - Pressing unit: pneumatic - Cutting unit: pneumatic Fsdpozk N Dkefx Ahpsgd - Diamond milling cutters, left + right: with CM technology - Corner copying unit with diamond milling cutters - Surface scraping blade - Buffing unit - Extendable workpiece support - Motorized pressing bridge adjustment with NC axis via program control - Extraction hoods for cutting unit - Multifunction milling unit: MOT 4 - Vertical sensing rollers: pneumatic - Pneumatic pivoting device for milling unit MOT 4 - Scraping blade unit MOT 2 with chip collection box - Spraying device for the infeed and outfeed area - Minimum workpiece length: 160 mm - Workpiece thickness: 6-60 mm - Edge thickness: 0.4-6 mm - Feed rate: 10 m/min - Overall length: 4930 mm - Weight: 1420 kg Availability: short notice Location: 63934 Röllbach normal

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Equipment and technical data: - Automatic edge feeding system - Glue application system, cartridge type Fgjdpfozk N Amjx Ahped - Printing unit, 4 rollers - Cross-cut saw unit - Flush trimming unit - Combination trimming unit for flush trimming, beveling, and rounding - Radius cutting blade - Buffing unit - Edge band thickness 0.3 - 20 mm - Edge band height max. 66 mm - Edge band length min. 200 mm - Feed rate 8/16 or 12/24 m/min Availability: short notice Location: 63934 Röllbach Condition appropriate for its age.

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Fully automatic, stationary model Cutting area: 5,300 x 2,200 mm (cutting width x cutting height) Saw blade diameter: 300 mm Control system for vertical and horizontal cuts With aluminum folding stops and aluminum center support With SUPER-CUT pre-scoring device Motor: 3 kW - 400 V Availability: short-term Fgjdszk Nx Ispfx Ahpsd Location: Röllbach Condition: normal

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: Control system with LCD display Swiveling control panel Program memory Manual adjustment of pressure beams Feed system via transport chain Workpiece support, extendable Joint milling unit 1961: - 2 x 2.0 kW - Diamond joint milling cutter for both forward and reverse rotation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feed of coil and strip material Glue application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - Use of PUR adhesives possible Printing unit 1816: - With driven roller - Pneumatic control of the printing unit Cutting unit 1918: - 2 x 0.22 kW - Swiveling from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius and chamfer milling - Motor-adjustable - Air nozzle on the milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius draw blade unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius draw blade Strip draw blade 1964: - Application-controlled strip draw blade - Air nozzle on the strip draw blade Smoothing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed rate: 8 m/min Distance, workpiece support: 470 mm Support plate Ø for edge material: 800 mm Cutting knife for coil material up to: 3 mm Heating time: 3.5 min Power, joint milling cutter: 2 x 2 kW Power, cutting saw: 2 x 0.22 kW Power, milling station: 2 x 0.6 kW Power, corner copying: 0.22 kW Extraction nozzle, joint milling unit: 120 mm Extraction nozzle, milling unit: 70 mm Extraction nozzle, draw blade unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Fgjdpfxozk Nwwe Ahpjd Availability: short notice Condition commensurate with age

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data: Nesting system with grid table Machining dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Travel ranges: - X: 5665 mm - Y: 1650 mm - Z: 325 mm with milling head 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with disc-type tool changer, 18-position with vacuum pump, 250 m³/h Fsdpfx Ahjzk Nvgspjgd with handheld control unit with central lubrication system with minimal lubrication system Availability: short notice Location: Röllbach in age-appropriate condition

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Fgedpfxszk Nu Nj Ahpsd Equipment and technical data: Travel distances: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling head: - 6 kW, water-cooled - Tool holder HSK 63 F - Speed 1,000 - 18,000 rpm Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles in a 32 mm grid - Horizontal drilling spindle: 1 + 1 - Vertical drilling spindle: 1 + 1 Nut cutter in X-direction Control system: Twin CAM 32 Vacuum pump: 100 m³/h Includes vacuum cups Dimensions: 5200 x 2843 x 1855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach well-maintained

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Condition: Functionally tested Equipment and technical data: Travel ranges: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling head: - 6 kW, water-cooled - Tool holder HSK 63 F - Speed 1,000 - 18,000 rpm - Tool changer: 6-position, side-mounted Fjdpfx Ahszk Nmfepjgd Drilling head: - 9 vertical drilling spindles in a 32 mm grid - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Nut saw: in X-direction Control system: Twin CAm 32 Vacuum pump: 100 m³/h Incl. vacuum suction cups Dimensions: 5200 x 2843 x 1855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach well-maintained

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: - with new glue application system - Infeed guide rail, manually adjustable - Milling unit 1961 Fodpfjzk Nlhox Ahpsgd - Edge feeder 1903 - Glue application station 1906 with sensing nozzle - Printing unit 1816, pneumatic - Cutting unit 1822 - Milling unit 1942 M, radius, chamfer, flush - Blowing nozzle, complete - Scraping blade unit 1929 - Chip collection box - Surface scraping blade 1964 - Dust extraction hood set - Protective guards, complete - Overall length: 5291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge band thickness, depending on equipment: 0.4 - 5 mm - Edge band height, max.: 55 mm - Edge band length, strip: min. 350 mm - Edge band overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed rate: 12.5 m/min - Extraction: - Dado milling unit: 900 m³/h - Milling unit: 280 m³/h - Scraping blade unit: 280 m³/h - Static negative pressure: - Dado milling unit: 1490 Pa - Milling unit: 1650 Pa - Min. air velocity: 20 m/sec - Dado milling unit connection: 70 mm - Scraping blade connection: 70 mm - Compressed air: 6 bar Availability: short notice Location: Röllbach age-appropriate

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit Fsdpfjwka N Tox Ahpsgd End trimming unit Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg Fedow I Ug Hepfx Ahpsgd The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Availability: by arrangement

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions Fgsdpfxew Nad He Ahpsd For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Fodpfx Ajyuld Ashpjgd Base machine Completely welded frame with extremely high rigidity Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Saw blade compensation (saw blade thickness can be individually programmed) If the unit is operated via the brake at the ba... (text cut off)

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: Fedpfxozc Sk Ej Ahpegd Working area X: 3,400 mm Working area Y: 1,287 mm Working area Z: 180 mm Number of milling spindles: 1 Main motor: 15 kW Speed, max.: 24,000 rpm 4th axis Tool clamping system: HSK-F63 Tool changing stations: 18 Vertical drilling spindles: 18 Horizontal drilling spindles X: 6 Horizontal drilling spindles Y: 2 Nut saw in X-direction Design: Cantilever machine Machine table: Console table Number of consoles: 6 Positioning aid: Dot laser Number of vacuum pumps: 1 Capacity of vacuum pumps: 140 m³/h Safety device: Foot mat Control system: BECKHOFF CONTROL Software: HOLZ-HER CAMPUS V6.4 Conformity marking: CE marking Weight: approx. 3,840 kg Space requirement, length: 6.7 m Space requirement, width: 4 m Availability: Short-term, by arrangement Location: Flörsheim

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Fjdpfx Ahew I U E Aepjgd Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Fgedpfx Aow Nac Ashpjd Availability: by arrangement Location: Flörsheim

Condition: new, Year of construction: 2022, Demonstration machine Year of manufacture: 2022 Equipment and technical data: Base machine 7402 with Pin-Jet dowel insertion function Handheld control device 2D barcode scanner Fgedewt E Tvopfx Ahpod Uninterruptible power supply (UPS) Quattro-HSK package incl. 4-position tool changer XL drilling head Double drill spindle in Y-axis Automatic central lubrication Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Features and technical data: Cutting length: 5300 mm Cutting height: 2200 mm Fgedpfx Asxymd Hshpjd Max. workpiece thickness: 80 mm Motor: 5.5 kW Compressed air connection: 6 bar, 50 NL/min Extraction connection: 2 x 100 mm, 1200 m³/h Pneumatic aggregate locking Pneumatic aggregate penetration Digital horizontal display Availability: by arrangement Location: Flörsheim

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 - extraction hood set Fgodpewka H Ssfx Ahped - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm - compressed air: 6 bar Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Fodpfx Aovymdqehpogd Edge feed for rolls and strips Joining milling unit with 2 milling heads Adhesive application system cartridge 3-roll printing unit Cross-cut saw unit Radius milling unit Radius scraper unit Corner copying unit Surface scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Edging height max.: 55 mm Edging length strip min.: 350 mm Edging projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min. Machine dimensions L x W x H 6480 x 1250 x 1690 mm Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Fodey Nuf Tjpfx Ahpegd Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim