Used Homag Double End Tenoner for sale (481)

Condition: ready for operation (used), Year of construction: 1985, Used folding machine line consisting of: Lifting table with pusher Roller conveyor Feeding unit Transfer system and workpiece pre-cleaning Double-end profiler Brand: Homag Type: FG63 Year of manufacture: 1985 Technical Specifications - With adhesive strip application - Machine for profiling and folding trim strips - Milling station on both sides - Control system: Siemens Simatic Touch - Glue application unit - Folding unit for folding pre-folded workpieces - Sliding shoe for pressing - Discharge table for material removal Electric scissor lift table Brand: Altek Year of manufacture: 2014 Technical specifications - Max. load capacity: 1000 kg - With integrated roller conveyor - Dimensions: approx. 3100 x 1000 mm - With height sensor for automatic detection of stack height and corresponding cycle timing Tilting skip Brand: Bauer Type: WU-R 1500 Year of manufacture: 1995 Technical specifications - Capacity: 1.5 m³ Crosscut and miter saw Brand: Bosch Year of manufacture: 2016 Industrial vacuum cleaner Brand: Nilfisk Type: Attik 751-11 3 Panel Transport Carts Brand: Fetra Panel Rack Brand: Robering Type: Dexion D90 Plus Year of manufacture: 2018 Technical Specifications - Consists of 5 uprights - Upright height approx. 4000 mm - Max. permissible shelf load: 3000 kg - Total of 16 crossbeams, length 2700 mm Crodpfxoy Drirs Aphjd Lot of single-sided pallet trucks - Width approx. 1800 mm - Load depth: between 800 and 1000 mm - Approx. 9 units Aluminum folding ladder Cross-slider - Total length approx. 3000 mm - Roller width approx. 800 mm Used folding machine lineconsisting of:Lifting table with pusherRoller conveyorFeeding unitTransfer system and workpiece pre-cleaningDouble-end profilerBrand: HomagType: FG63Year of manufacture: 1985Technical Specifications- With adhesive strip application- Machine for profiling and folding trim strips- Milling station on both sides- Control system: Siemens Simatic Touch- Glue application unit- Folding unit for folding pre-folded workpieces- Sliding shoe for pressing- Discharge table for material removalElectric scissor lift tableBrand: AltekYear of manufacture: 2014Technical specifications- Max. load capacity: 1000 kg- With integrated roller conveyor- Dimensions: approx. 3100 x 1000 mm- With height sensor for automatic detection of stack height and corresponding cycle timingTilting skipBrand: BauerType: WU-R 1500Year of manufacture: 1995Technical specifications- Capacity: 1.5 m³Crosscut and miter sawBrand: BoschYear of manufacture: 2016Industrial vacuum cleanerBrand: NilfiskType: Attik 751-113 Panel Transport CartsBrand: FetraPanel RackBrand: RoberingType: Dexion D90 PlusYear of manufacture: 2018Technical Specifications- Consists of 5 uprights- Upright height approx. 4000 mm- Max. permissible shelf load: 3000 kg- Total of 16 crossbeams, length 2700 mmLot of single-sided pallet trucks- Width approx. 1800 mm- Load depth: between 800 and 1000 mm- Approx. 9 unitsAluminum folding ladderCross-slider- Total length approx. 3000 mm- Roller width approx. 800 mmNote:The technical specifications and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2014, number of axes: 3, This 3-axis HOMAG WEEKE OPTIMAT ABD150 was manufactured in 2014. It is a used multi-spindle drilling machine designed for precision drilling and dowel inserting. If you are looking to get high-quality drilling capabilities, consider the HOMAG WEEKE OPTIMAT ABD150 machine we have for sale. Contact us for further details. • Used drilling and dowel inserting machine Credpey Dgpaofx Aphed

Condition: ready for operation (used), Year of construction: 2010, Edgebander manufactured in 2010. This HOMAG KAL 210 Ambition 2264 is a used single-sided edge banding machine. If you are looking to get high-quality edge banding capabilities, consider the HOMAG KAL 210 Ambition 2264 machine we have for sale. Contact us for further details. Codpfxsy Dgm Ss Aphjrd • Used single-sided edge banding machine

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.23 kW -Speed: 18000 rpm at 300 Hz -Dimensions: 210/70/H100 mm -Weight: 2 kg Csdpfx Asb A Nx Dsphord

Condition: used, machine/vehicle number: 008527, X axis working area: 6000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Credsy Nx Ufepfx Aphjd Total number of drilling spindles: 21 Total number of tool changer positions: 77

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, - Year of manufacture: 2003, commissioning: 2004 - Working dimensions: 4000x1600x200mm - Main spindle: 7.5kW - C-axis - Gluing unit - Drills: 12x vertical Credsza Uryspfx Aphed - LED display of the vacuum pump position - Tool magazine: 12 slots

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC Machining Center HOMAG BOF 311 Available August 2026 - Year of manufacture: 2008 (annual service by HOMAG) - Main spindle overhauled in 2024 - WoodWop software Cjdpfxey I Dtqo Aphjrd - AP table (automatic table) - Table dimensions: 6000 x 1525 mm (10 consoles) - 18.5 kW main spindle / C-axis + Flex-5 interface - Y-axis machining with front stops: 1525 mm - Y-axis machining with rear stops: 1850 mm - Drilling unit - 30-position tool chain changer - Grooving saw unit on X-axis (swivable 0-90°) - Without tools / aggregates / chip conveyor - Vacuum pump If you have any questions, feel free to contact us. Additional photos/video available upon request. A viewing during production operation is possible; we will be happy to organize this for you.

Condition: good (used), Year of construction: 1996, for max. panel size of 320 cm length and 220 cm width or depth Cedpfxey Nfdyo Aphjrd undismantled, located in Bad Berleburg

Condition: used, machine/vehicle number: 008479, Max. machining width: 1650 mm Crodoy Edqwepfx Aphjd Min. machining thickness: 3 mm Working Table: Fixed pass height No. Operating units: 4 Nr

Condition: used, machine/vehicle number: 008495, X axis working area: 3050 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Crsdpfx Apsy Edqqshed Maximum edge height: 45 mm Total number of drilling spindles: 21 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 008244, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Laser Premilling Unit: yes Corner Rounding Unit: yes Codpfxox Swgfs Aphsrd Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008169, X axis working area: 4500 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Crsdpoxaud Ijfx Aphsd Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 22

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 0-261-04-6713, functionality: fully functional, operating hours: 6,836 h, input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 18 m/min, actuation type: electric, total height: 2,300 mm, total length: 5,760 mm, total width: 1,555 mm, overall weight: 2,600 kg, Equipment: CE marking, documentation/manual, HOMAG Optimat KDF 650 C (Ambition 1650 FC) – AIRTEC, Corner Rounding, powerTouch – Single-Sided Edging Machine Key Information: • Manufacturer: HOMAG • Model: Optimat KDF 650 C (Ambition 1650 FC) • Year of Manufacture: 2017 • Condition: Used, ready for operation • Location: Skwierzyna, Poland _____ MACHINE DESCRIPTION Professional single-sided edging machine designed for processing straight edges of workpieces, applying various types of edge banding (roll and wood veneer), and performing complete final processing. The machine features a comprehensive range of equipment, including an AirTec AT 15 unit (seamless edge banding technology), a corner rounding unit 2x WD 60, and a modern powerTouch control system with a touchscreen. Complete automation and pneumatic adjustment of units from the control panel. TECHNICAL DATA • Feed speed: adjustable 8 – 18 m/min • Max. speed with rounding cutter: 11 m/min • Working height: 950 mm • Workpiece thickness: 8 – 60 mm • Edge banding thickness (roll): 0.4 – 3.0 mm • Edge banding thickness (veneer/strip): 0.4 – 12.0 mm • Total machine length: 5,760 mm UNIT CONFIGURATION 1. Pre-milling unit: 2 x 2.2 kW, with diamond heads. 2. A12 edging unit: quick-change hot melt adhesive application unit, infrared emitter for heating the edge of the board. 3. AirTec AT 15 unit: Enables processing of laser/functional edge banding using hot air. Ideal joint, no visible glue. 4. Edge banding magazine: automatic for rolls and strips. 5. Pressing zone: 1 main roller pneumatically driven + 3 pressure rollers. 6. Trimming unit: 2 motors x 0.35 kW, flush/chamfer. 7. Longitudinal milling unit: 2 x 0.55 kW, counter-rotating, DFC cutters with pneumatic adjustment, adjustable from the screen. 8. Corner rounding unit (WD 60): 2 x 0.35 kW. Multifunctional unit for complete processing of the end of the workpiece (3D corners). Adjustable from the screen. 9. MZ40 profile scraper: Pneumatically retractable (R1 / R2), adjustable from the screen. 10. Flat scraper (glue joint): For removing excess glue (ready-to-use finish). 11. Polishing unit: 2 motors x 0.18 kW. CONTROL SYSTEM • powerTouch: modern control panel with a 21.5" Full-HD touchscreen. Credpfx Ajy Ec A Sjphsd • Intuitive graphical interface, data logger for production data (number of pieces, time, edge banding consumption). • Network operation possible (Ethernet). _____ Additional information for the buyer: • The machine comes from a Polish distribution network (HOMAG Poland). • Complete technical documentation included.

Condition: excellent (used), Year of construction: 2013, operating hours: 3,000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 suction cups, side and longitudinal stops, LED position display for vacuum suction cups Venture 316 Future Package 10 extraction rails, Power-Clamp connection, vacuum connection for templates WORKPIECE PARAMETERS: Crodpfx Aoy E Npfjphod – Maximum workpiece length: All units, single operation: 3300 mm; pendulum operation: max. 1740 mm Tool diameter 25 mm: single operation: 3475 mm; pendulum operation: max. 1915 mm – Workpiece width: Front stop: 950 mm all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping devices – Up to max. 60 mm with standard clamps SAFETY AND PROTECTIVE EQUIPMENT: EC-compliant; Safety enclosure on the right with door Left and rear: wall installation! Equipment: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer (side mounted) Drilling head with 16 spindles (V12/H4/S0/90°) DRIVE5C+ interface for aggregates Tool length measuring probe Software for position measurement and CNC coordinate rotation Tool transfer station Coolant tank for processing spindle Vacuum pump 300/360 m3/h Powerclamp pneumatic package Control system: POWERCONTROL PC85 with POWERTOUCH system; IPC POWERPACK Operator terminal for program start; camera system with tablet PC WOODWOP CAD/CAM standard interface Documentation and control texts: German Delivery includes only the tools and HSK tool holders shown in the images!

Condition: used, Year of construction: 2002, functionality: fully functional, Homag Profi Line CHF 51/32/32 Panel Saw with Cut-Rite software optimization - Year of manufacture: 2002 Crjdpfx Aex Ey Nvophed - Cutting width: 3200 x 3200 - 3 tables with air curtain - Saw projection: 102 mm - Cutting height: 85 mm - Main blade 400 mm - Main motor 11.2 kW (15 HP) - Incisor blade with independent motor

Condition: used, machine/vehicle number: 008364, Max. panel width: 1000 mm Max. panel length: 2500 mm Length of conveyor: 6550 mm Panel return for edgebander: Right Credpfex Swc Tsx Aphed

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Working range X: 5200 mm Working range Y: approx. 1400 mm Electro-spindle Crjdjzgtmujpfx Aphod Drilling bits for vertical drilling: 20 Drilling bits for horizontal drilling X: 8 Drilling bits for horizontal drilling Y: 2 1 Saw blade 4-position tool changer 30-position chain tool changer Control: Power Control PC85 Control panel 8-position work table Vacuum pump Safety mats Includes Profi TBA 330/20/16 Included accessories: - Small and large standard dust extractors - 6 multi-function clamps - 5-axis Flex unit - 4-spindle unit - Unit for locks (lock box) The machine is sold with units and without tools. The machine is sold with clamping devices. Available between June and August 2026.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Maximum workpiece dimensions for processing: 2500 x 1300 mm Crjdpfx Aozga E Dophsd Workable workpiece dimensions: 2500 x 1000 mm 2 Panel clamping devices Infeed worktable (panel support) Outfeed table (with motorized belts) Software: woodWOP

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Max. panel length: 2500 mm Main saw blade projection: 110 mm No of Rip saw Grippers: 9 Cjdpfx Asygtbmspherd No of Cross Cut Grippers: 4

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking Codpfx Apoyw Ndmehsrd - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: used, machine/vehicle number: 008016, X axis working area: 3300 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 10 KW Number of controlled axes: 5 axes Total number of drilling spindles: 35 Codpsw Idhmjfx Apherd Total number of tool changer positions: 14

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-200-07-9819, Type: KAL210 / EDITION Machine no.: 0-200-07-9819 Year: 2011 Single-sided machine for machining straight workpiece edges. Edge banding and post-processing of various edge banding materials, in through feed lengthwise and crosswise. POWER CONTROL control PC22 Control system Windows PC Hardware: PLC control Integrated stretch control for contact-free control of the machining units Operating system Windows XP Industrial PC 10" TFT monitor with touch screen, selection and setting of all necessary production parameters, such as: program selection and workpiece thickness adjustment. PC keyboard and mouse USB connection Network connection Remote control Setting operation, start feed, emergency stop switch Unit equipment: -Release agent application unit -Joint milling unit -Glue unit A20 with 2 rollers -Cutting unit HL84 -Pre-milling unit -Shape milling unit FF32 -Universal milling unit UF10 -Profile sanding unit PN10 -Finishing unit (glue joint sanding unit + polishing brushes) Technical data Minimum workpiece width: for thicknesses 12-22 mm, 60 mm for thicknesses 23-40 mm, 105 mm Workpiece overhang 30 mm Workpiece thickness 12-60 mm Molding material on roll 0.3-3 mm Molding cross-section max: Crodpfsyn Ilpjx Aphsd For PVC 135 mm2 For veneer 100 mm2 Molding material strips 0.4-20 mm Edge cross-section for strips 900 mm2 Working height 950 mm Pneumatics 6 bar Power 400 volts, 50 Hz, 3-phase NOTE Subject to incorrectly published technical data.

Condition: ready for operation (used), Year of construction: 1999, Brand: Homag Type: Optimat CH 03/32/32/E Plus Serie no: 0-341-07-5006 Year: 1999 Techn info: Saw width, with fence: 3 200 mm Saw length: 3 200 mm Cutting height: 50 mm Main saw blade: Ø 300 x 75 mm Scoring saw blade: Ø 125 x 45 mm Main saw speed: 5 100 rpm Scroll saw speed: 5 500 rpm Program carriage feed: 14 m/min Saw carriage feed, forward and return: 6-32 m/min Return feed: 32 m/min Main saw motor power: 5.50 kW Scroll saw motor power: 0.55 kW Operating voltage: 380 V, 50 Hz, 3 phase, 32 amps Crsdpfx Aevwku Usphed Control voltage: 24 V DC Floor quality: min. 5 Kp/cm² Connection cable: 5 x 6 mm² 1 fixed, coated front table 1 750 x 400 mm Stock no: 2002415BXM

Condition: used, machine/vehicle number: 008412, Type of edging: Thin edge, Thick edge Gluing System: PUR Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max feed speed: 40 m/min Operating Units Right Side: 11 nr Crsdpfsyilxmex Aphjd Operating Units Left Side: 11 nr

Condition: used, machine/vehicle number: 008403, Max. machinable height: 160 mm Maximum machinable width: 250 mm Crjdpfx Aeykivhophed Max. forward feed speed: 24 m/min Operator shafts number: 5