Used Homag Edgebander for sale (488)

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, workpiece length (max.): 2,800 mm, workpiece width (max.): 850 mm, number of slots in tool magazine: 13, actuation type: electric, total height: 1,895 mm, total length: 2,920 mm, total width: 1,890 mm, overall weight: 1,580 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, The Drillteq V-200 is in continuous use, which means the number of parts being processed is increasing. The machine is in good condition and is regularly serviced. Tjdpfx Abj Afm Itoued For more information, please call 601 548 875.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Homag Type: Optimat KDF 440 C Year of manufacture: 2017 Technical data Workpiece thickness: 8 - 60 mm Edge material: 0.4 - 8 mm (depending on the equipment) Feed rate: 8 - 18 m/min (stepless) Workpiece length min. approx. 120 mm Workpiece width min. approx. 60 mm Glue application EVA hot melt adhesive, optionally PUR-compatible Glue reservoir Teflon-coated, quick-change system possible Total connected load approx. 15 - 20 kW (depending on the equipment) Compressed air requirement: 6 - 7 bar Tjdpfx Aszuykcsbusd Machine weight: approx. 3,000 - 3,800 kg Control system: powerControl / powerTouch CE marking Equipment: Joint milling Glue application Pressure zone Cut-off saw unit Milling unit top/bottom Corner rounding unit Scraping blade unit Edge finishing unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 008729, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Todpfxszylv Ie Abued

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0-201-24-0260, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance Z-axis: 600 mm, workpiece length (max.): 3,470 mm, workpiece width (max.): 1,550 mm, number of slots in tool magazine: 18, controller manufacturer: HOMATIC, controller model: PC85, spindle motor power: 15,000 W, Equipment: CE marking, documentation/manual, Machine with shuttle console tables Workpiece length X max. (all units) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece length max. (milling cutter D=25 mm) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece width Y max. (all units) - max. 1300 mm Workpiece width Y max. (milling cutter D=25 mm) - max. 1550 mm 2 individually movable console clamping tables - 4-position workpiece placement possible - 8 movable consoles (4 per table) each with 1 front stop - Console length 1490 mm - 4 lifting rails - Side stops 4 x left, 4 x right (mirror image) - 1 vacuum circuit per table - 2 vacuum pumps, 140 m3/h each - Chip conveyor belt Equipment / Units: - Milling spindle 15 kW, liquid cooling - Tool changer, 18-position carousel - C-axis with electrical interface - C-axis extension for FLEX-5 unit - Drilling unit 2.7 kW, 20 spindles vertical / 10 spindles horizontal - Swiveling sawing/drilling unit - Sawing unit D=1200 - FLEX5 sawing, milling, drilling unit for multi-tool - 16 pcs. suction cups 160x115 mm - 8 pcs. suction cups 125x75 mm Control / Software: - PC85 control system Tedpo Afabajfx Abuod - WoodWop 5.1 - Wood Design Package - CAD plugin - DXF import - Schuler MDE Available from week 46/2026.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 0-240-75-5616, functionality: fully functional, Equipment: CE marking, documentation/manual, SAWTEQ B-300 panel saw Todpfoz Tt Eiox Abujd Cutting length: 3800 mm Cutting width: 3800 mm In very good condition, selling due to replacement with a different model.

Condition: used, Year of construction: 2019, functionality: fully functional, 6 heads, good, working condition, FREUD tool set Tjdpfx Abez Tymmjusd

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. Tsdjzuyhhopfx Abujd QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 5-axis CNC machining center as a cantilever table design Working area in X = 4375 mm Working area in Y = 1550 mm Working area in Z = 250 mm with 12 kW milling spindle, liquid-cooled 5-axis spindle Homag Drive 5 C+ max. speed 24,000 rpm Tjdsz Rrbwjpfx Abued with torque support Tool holder HSK F-63 18-position disc tool changer 17 drilling spindles, vertical 2 drilling spindles, horizontal in X 2 drilling spindles, horizontal in Y Notch saw, 90° swiveling with LED light strip as positioning aid with 2 vacuum pumps, each 300 m³/h with special workpiece clamping system for small parts with barcode scanner Safety device: bumper with chip conveyor with powerControl PC 85 control system with handheld operating device Software: Homag Woodwop 8.0 WoodScan CollisionControl Space requirement: approx. L x W x H 7650 x 4710 x 2850 mm Availability: approx. July 2027 Location: NRW (North Rhine-Westphalia)

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, finishing unit, buffing unit -Manufacturer: Homag, 2 milling units and 2 buffing units from BRANDT KS 25 edgebanding machine -buffing units: motor KMER 0.18 kW 1360 rpm -Polishing roller: Ø 145 mm, height and depth adjustable / swiveling -Milling units: Motor Perske / Homag, see photos of nameplates -Voltage: 220 V / 200 Hz -Price/Fee: complete -Overall dimensions: 1200/800/H590 mm Tsdjx Hyzhopfx Abusd Total weight: 175 kg

Condition: used, Year of construction: 2011, Edge processing line HOMAG, consisting of: - Infeed system for longitudinal and transverse parts - One HOMAG edge banding machine with LASER GLUING - Transfer station for longitudinal and transverse output - Return conveyor for automatic circulation Pos. 1 Vacuum infeed system TBP 410 Max. workpiece size 2,800 x 1,200 x 40 mm Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees Pos. 2 Single-sided laser edge banding machine HOMAG KFL610/21/PU/L/25/SI14 For automatic 4-sided processing in 4 passes With SI 14 feeding system for automatic feeding of longitudinal and transverse parts Equipment: - Release agent application top and bottom - Trimming cutters 4.5 KW / Double-trimming cutter 2 x 6.6 KW - Stepless axis adjustment vertical and horizontal - Mortising unit 2 x 4 KW - LASERTAC activation unit 3 KW / optionally PU gluing - Max. edge thickness 3 mm Tedpfx Abozvmx Aouod - 24-position roller magazine with servo-controlled edge feeding - Release agent spray device top/bottom - Trimming unit bevel/straight HL 84 / 0.8 KW with 2 motors - Pre-milling unit with 2 motors, each 1.5 KW (pneumatically adjustable to 2 positions) - Release agent spray device top - Profile milling unit FK 23 with 2x8-position tool changer for 20 cycles/minute - Multi-scraper unit MN 21 automatic - Finishing unit FA 11 top/bottom (flat scraper and buffing unit) - Milling unit with 6.6 KW motor, pivotable 90 degrees, stepless axis adjustment vertical and horizontal. With HSK 63 F tool holder - Machine is designed for tool changes in the gap Pos. 3 Workpiece return with chain lifting buffer To decouple processing machines by temporarily buffering. Return via approx. 6 belt conveyors Pos. 4 Vacuum transfer device TBP 410 Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees

Condition: used, machine/vehicle number: 006042, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Tsdpfx Ae Aax Rvsbuod Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, Year of construction: 2009, Edge banding machine with workpiece return system Manufacturer: HOMAG Type: PROFI KAR310/11/A20/S2 Year of manufacture: 2009 Technical data Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding. Tjdpfx Aozuyhusbujd

Condition: used, machine/vehicle number: 007987, Position 1: Single Edgebanders HOMAG-HIGHFLEX 1650 Todex A Thqjpfx Abued Position 2: Panel Return Systems HOMAG-HIGHFLEX 1650

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Tsdeyzxa Espfx Abued Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: used, machine/vehicle number: 008653, Max. panel width: 3200 mm Max. panel length: 3200 mm Main saw blade projection: 150 mm No of Grippers: 9 Tsdpezvwqcjfx Abuod

Condition: used, machine/vehicle number: 007906, Position 1: Roller Conveyors HOMAG-PROFI KFL 350/10/A3/WZ Position 2: Single Edgebanders HOMAG-PROFI KFL 350/10/A3/WZ Tedpfx Abowucm Aeued Position 3: Panel Return Systems HOMAG-PROFI KFL 350/10/A3/WZ

Condition: used, Year of construction: 2020, Spray coating machine Manufacturer: Homag Type: PROFI GSF100/P/13 Year of manufacture: 2020 Technical data Spray machine for automated coating of furniture components, doors, stairs, and interior design elements with water-based or solvent-based paints. - Sled runner with a spray arm to accommodate four spray guns - Workpiece transport with a vacuum conveyor belt with additional paper support - Feed speed: 1 - 4.5 m/min - Average coating speed: 1.5 - 2.5 m/min - Working height: 900 mm - Extraction volume: approx. 10,000 m³/h - Diameter of extraction nozzle: 350 mm - Electrical connection power (without additional equipment): 10 kW - Compressed air consumption (without spray application): approx. 150 nl/min Workpiece parameters Workpiece width: 100 - 1300 mm Workpiece length: 300 - 3000 mm (without additional workpiece support) Workpiece thickness: 5 - 60 mm Workpiece weight: max. 80 kg Workpiece material - Chipboard, MDF and HDF boards - Solid wood components - Lightweight panels Tods Adr Hxopfx Abuod - The difference in height between workpieces may be a maximum of 2 mm Coating material - Paint based on water or solvent Electrical parameters - Operating voltage 400 volts, 50 Hz Roller table for machine infeed/outfeed - Powered roller table for automatic transport of workpieces Mobile paper roll trolley - For quick changing of the unwinding paper roll Touchscreen operation - Machine operation is performed via a touchscreen control panel, which is ergonomically positioned on the operating side of the machine. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2007, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, controller model: PC22, TECHNICAL DETAILS The machine has the following configuration: Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min Pressure bar: with rubber belt Panel stop: with CNC positioning Panel infeed alignment system: available Edge application unit Processing interval: automatically time-controlled Motor power: 3 kW Speed: 9,000 rpm Edge processing Edge heating lamps: available Roller magazine: available Hot melt adhesive reservoir: available Hot melt adhesive pre-melter: available Number of pressure rollers: 7 Positioning: CNC-controlled Trimming unit Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge rounding unit Manufacturer/Model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Profile trimming unit Number of motors: 1 Processing interval: automatically time-controlled Motor power: 5 kW Speed: 11,600 rpm Scraping blade unit Manufacturer/Model: PN10 Glue scraping blade unit Brushing unit Number of motors: 2 Spray device: available MACHINE DETAILS Number of processing units in edge processing: 7 Control system: PC22 EQUIPMENT Pressure bar with rubber belt Panel stop with CNC positioning Panel infeed alignment system Edge heating lamps Roller magazine Hot melt adhesive reservoir Hot melt adhesive pre-melter 7 pressure rollers Trimming unit Flush trimming unit, top and bottom Edge rounding unit FF12 Profile trimming unit Scraping blade unit PN10 Glue scraping blade unit Brushing unit with spray device Todjz Ekbkopfx Abusd PC22 control The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 6042

Condition: used, Year of construction: 2012, Feed speed: 18-25m/min, with FK11 max. 20m/min, working height: approx. 950mm, max. workpiece thickness: 60mm, edge banding material rolls: approx. 0.3-3mm, edge banding material strips: approx. 0.4-6mm, max. roll diameter: 830mm, machine length: approx. 7845mm, operating hours: 25724h, feed operating hours: 3371h, machining time: 412h, control system: HOMAG powerControl PC22. Annual production: between 15000 and 22000 linear meters per year. Equipment: Top/bottom release agent spraying unit, joint trimming unit, glue application unit, 2-roll edge banding magazine, pressure zone, end trimming unit HL81, pre-milling unit BF10, profile trimming unit FK11, profile scraper PN10, finishing unit with glue joint scraper and buffing unit, preparation for HOMAG laserTec, powerControl PC22 with touchscreen, automation packages. In addition, scrapers for both 2mm and 1mm edges are available. Equipment: Extensive range of processing units including joint trimming, glue application unit, 2-roll edge banding magazine, end trimming, pre-milling and profile trimming units, profile and glue joint scrapers, buffing unit and spraying systems. HOMAG powerControl PC22 with touchscreen, automation packages and preparation for laserTec. Scrapers for 1mm and 2mm edges available. Special feature: PUR retrofit in 2023 with GP Service EasyPUR AC-34 and RIEPE spraying system LP289/99 (24V retrofit). The machine is in good, well-maintained condition, fully functional, in operation and has been serviced annually by HOMAG. Documentation available. Inspection possible by arrangement. Tsdpfo Aba Rtex Abued

Condition: excellent (used), Year of construction: 2020, HOMAG CABTEQ S-250 / MPH 450/25/07 carcass press, year of manufacture 2020. Carcass press for furniture manufacturing. Model: MPH 450/25/07. Collection possible from December 15th. Earlier collection only possible by arrangement. Inspection by appointment. Disassembly, loading, and transport will be arranged. Tedpfx Ae Adub Esbujd Price on request. Contact: DS-Maschinen – Owner: David Schulz.

Condition: ready for operation (used), Year of construction: 2004, Double sided edgebander manufactured in 2004. This HOMAG OPTIMAT KFR 526/10/A3/35 features a robust design suitable for various applications. It operates at a voltage of 400 V and has a load capacity of 250 A. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG OPTIMAT KFR 526/10/A3/35 machine we have for sale. Contact us for further details. Todpfx Asz Ah Ixsbuod - Voltage: 400 V- Frequency: 50 Hz- Phase: 3~+N- Control Voltage: 24 V- Nominal Current: 190 A - Main Fuse: 250 A

Condition: used, machine/vehicle number: 008516, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Todszbrn Ijpfx Abujd Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, - 5-axis spindle DRIVE 5C Profi, 12 kW - Work area: 4000 x 1300 mm (X, Y) Todpszz N Uqjfx Abued - Tool changer: 30-position - Drilling units: 12x vertical, 2+4 horizontal - Projection laser SL LASER Pro Director 6 - Slotted table/magnetic table

Condition: used, Year of construction: 2022, operating hours: 1,700 h, Panel dividing saw Manufacturer: Homag Tedpfs Abaqyox Abujd Type: Sawteq B-200 Optimat HPL200/38/22 Year of manufacture: 2022 Technical data - Cutting length: 3800 mm - Width of feed table: 2200 mm - Number of clamping devices: 7 - Feed rate: max. 80 m/min - Stepless feed rate - Panel thickness: min. 9.5 mm - Saw blade overhang: 95 mm - Saw blade diameter: max. 380 mm - Main motor: 9.2 kW - Scoring saw - Labeling manually via HOMAG PICA - Control system: CADMATIC 5, Homag POWER CONTROL V2 - CE marking - Operating hours: 1700h Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container Tsdpfx Aed Duvfebued -With the pre-melting device, you always have enough hot melt adhesive available. -Manufacturer: HOMAG -Type: Type: 2-006-51-2870 -electrically heated -Dimensions: 400/70/H225 mm -Weight: 10.6 kg