Used Hot Stamp for sale (3,744)

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Cpjdpfsx Hqmhsx Abuou Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately Cpjdpfxowxtb Es Abuou 12-month warranty.

Condition: excellent (used), functionality: fully functional, Segment I – Unwinder with stabilizing table The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment. In addition: • The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working. • Leading (pulling) servomotors ensure precise control of the material, also located in the station. Segment II – Central (Die) The heart of the machine is the flat die, allowing for cutting and embossing. It has been equipped with: • Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations. • Upper foil unwinders enabling additional material processing. • Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work. • Lower trolley as an alternative to the hanging system – used depending on the specifics of the work. Segment III – Puncher The third segment is responsible for separating cut labels and transporting them to the receiving tray. • Puncher – precise separation of single labels. • Two laminators – one on each side of the puncher, with adjustable pressure. • Unwinders and winders ensuring smooth guidance of additional raw material. Segment IV – Rewinder The last segment is responsible for the final winding of the finished material. Equipped with: • Two mandrels – enabling simultaneous or alternate winding of the finished product. • Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material. • Slitting disc knife station. • Whisk (waste) extraction system. • Web sensors placed under each overhang, ensuring optimal process control. Additional functionalities Cedpfxowck U Ro Abujpu • Remote control – the machine can be operated via the tablet included in the set. • Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.

Condition: ready for operation (used), Year of construction: 2014, A hot stamping system is available for hot stamping the silver edge on instrument panels. Heating capacity: 5.6 kW, stamping force: 20 kN, max. pressure: 6 bar. Including laminar flow module Spetec Super Silent. Documentation available. On-site inspection is possible. Cpedpfx Absuyk S Ajuou

Year of construction: 2001, condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm Cpjdpfx Abjwabbvjuju The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system).

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: JV3D5274-099, For sale is a digital finishing system with hot stamping foil module in very good condition including spare parts dispenser. It has been completely overhauled and is ready for use. Technical data: Make: Mgi Jetvarnish JV3D5274 incl. IFoil module (from Körapackmat) Year of manufacture: iFoil 2014 SN: 3649 / Jetvarnsih 2014 SN: JV3D5274-099 Digital single pass inkjet printing with UV varnish using 8 piezo print heads from Konica Minolta type IHM 1024i (2 x 512 nozzles per head) Mechanical sheet transport with automatic sheet feed on the middle/left or right with ultrasonic double sheet detection. Feeder and stacker with a capacity of 4000 sheets at 135gr/m² (sheet stack up to 60cm high) Pixel-accurate sheet detection with laser keyence sensors for varnish form positioning Dual camera system for print mark detection for print data alignment Flat sheet guide with conveyor belt over a vacuum table that can be adjusted to the sheet width using blinds Air-cooled LED pre-drying directly behind the print head bar Infrared unit for surface varnish application Air-cooled high power UV drying from market leader IST-Metz Connected foiling unit for hot foil embossing including sleeking option. Heating roller newly installed Dec 2019 (ran approx. 2 km since then) Cpedpoqfddbjfx Abuju Intuitive production software with an editor for pixel-accurate editing of the varnish layer.

Year of construction: 2004, condition: good (used), coil, coil Cpsdpfx Abommc Uijueu edge guide brake load cells 12 holographic spool unwinders hot stamping unit cooling suction hood with collection bag boiler refrigerator electrical panel operator panel

Condition: excellent (used), A3 format Cpedpsxtwx Isfx Abuju Gilding Additional frame Die-cutting material

Year of construction: 2015, condition: excellent (used), continuous holographic ribbon hot stamping equipment Csdpfx Aouzkutsbuepu applies 2 strips on request can be expanded to 4 configuration on request: reel-to-reel or by bundle for modules

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,250 kg, Hot Foil Stamping Tiegel / Tiegel Heidelberg GTP Size min.: 85 x 102mm Cpsdpfxjxu Uc Hs Abueu Size max.: 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Punching pressure: 60T Weight approx. 2250kg Online-Video-Inspection by FaceTime Available Immediately - Can be inspect Can be test

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Cjdpfx Absp H Swdsuepu Total weight: About 4000KG

Condition: like new (used), Year of construction: 2025, operating hours: 8 h, functionality: fully functional, machine/vehicle number: GN-300DF, GN-300DF Automatic Contour Hot Stamping Machine employs digital automatic contouring, designed for hot stamping on the peripheral surfaces of polygonal, elliptical, and irregularly shaped products. It is suitable for hot stamping or foil stamping on the peripheral surfaces of square, rectangular, elliptical, polygonal, irregularly shaped, and other products. This machine accommodates products of any shape and size. Simply replace the corresponding fixture when embossing products of different shapes and specifications. It offers excellent embossing results, safe and reliable operation, and high efficiency. Cedpoyhuu Rjfx Abuspu Machine size :L1580xW1080xH1980mm Processing size: Ф350xL150mm Max.Opening: 350mm Total Power: 4.0KW Max.Pressure: 100~250Kg Efficiencyi: 100~200Pcs/h Machine weight: 350Kg Powersupply: AC220V/50HZ

Condition: good (used), Karl Krause Hot Stamping press Manufactured by Karl Krause, Germany, The machine is fully operational, after modernization of the control system. The work table is moveable. The device was purchased from a school workshop and has not been used in production. Power supply: 230V Heating plate size: 400x275mm. Cedpfxjx N Dxvj Abujpu Weight: approx. 600kg.

Year of construction: 1994, condition: good (used), machine/vehicle number: 25286, Built in 1994 Cjdpfx Ajd R Saqsbujpu Equipment: embossing press: • case magazine with case bending device DBA (without feeding conveyor) • foil feeder with two pairs of foil feeding rollers • electric counter • delivery conveyor to the right

Year of construction: 1988, condition: good (used), CARLO SALVI 780/SV Fully functional, good conditions YEAR 1988 Double Stroke Headers 6.35x80 mm, Cedpfsigg N Hjx Abuspu 360 ppm

Condition: excellent (used), Nordson Hot Melt Heated Hoses 4 qty 8 ft long heated hoses Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included Cpodowuqfyjpfx Abuou In excellent working condition

Condition: used, Nordson Problue 7 Hot Melt Pump Cjdpfx Ajwq S Eyobujpu Model Problue 7

Condition: used, Nordson Problue Hot Melt Pump Csdowq Suuepfx Abuspu Model - Problue 10 Facility to connect up to 6 hoses 10kg Tank Capacity

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Cjdpfx Ajwq Sv Ejbujpu Complete with 2 heated hose and dispensing guns, air solenoid & modules Glue bead dispensing tub / storage container Mounted on a stainless steel frame

Condition: new, Year of construction: 2023, operating hours: 300 h, functionality: fully functional, turning length: 2,880 mm, spindle motor power: 90,000 W, type of input current: three-phase, For sale: new compounding line with a real capacity of 300kg/h. The line includes hot and cold mixers, a twin-screw extruder (2 twin screw extruder) with two feeding points—at the start of the screw and from the side—suitable for high loading of dry substances. Features include a vacuum pump, hydraulic screen changer, vibro table, and storage silos for materials. The line can process powdered materials, hard materials, various grindings, mixtures, and granules of PP, PE, and PVC. It can produce high-quality masterbatch, fillers, and other products. Up to 85% dry matter content. The machine is practically brand new, only tested for a few hours. Control with frequency inverters. A set of spare parts, spare heaters, and spare screw segments is included. Cpodpfjx Uqyqjx Abusu Possibility to test with your own materials.

Condition: like new (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, As new! Used for only 15 production days. Hot Air Furnace — Capacity: 2,000,000 kca This unit is in excellent condition, practically as new, with only 15 days of operation. Ideal for industrial heating or drying applications. Cpedpfexq Rv Iox Abuou For more details or photos, please contact us.

Condition: ready for operation (used), controller manufacturer: Bosch, nominal power: 5.9 kW (8.02 HP), All tools indexing Full option machine!! Rotating tool adaptor Aut repositioning device with footpedal Cpjdoyhib Sepfx Abuju Programmable footpedal Auto toolchanger with 22 stations 3 plate clamps Programmable chute for parts 500 x 500 mm Container for workpieces Punch spray lubrification 2nd lubricant container Exhaust device Chip container Rapid shutdown of hydraulic system External control panel Graphic workshop programming Workshop programming SW package for PC Safety equipment RJ45 network connection options: - MultiTool - MultiShear - MultiBend - Deburring tool - Threadforming - Chipconveyor - Automatic closing of clamps - Part trap detection sensor Nice selection of tools inlcuded + punch tool grinder Punching pressure: 180 kN Max sheet thickness by punching + nibbling: 6,4 mm Max weight workpiece: 230 kg Working range on cross-side (X-axes): 3000 mm Working range along (Y-axes): 1600 mm Positioning speed along X-axes: 90 m/min Positioning speed along Y-axes: 60 m/min Toolchanger: 22 tools Changingtime: 0,3 / 3 sec

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed McD factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Cedpfxex Altfj Abuepu Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar.

Condition: used, Year of construction: 2015, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll HS 810-720     year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine,  production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Codpfx Absyhgwdsujpu

Condition: used, Year of construction: 2015, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll HS 810-720     year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine,  production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Cedpfx Aeyhgvgsbuopu