Used Transfer Hot Press for sale (40,007)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 013531, An efficient and economical lamination process is realized with the SMARTLAM CHK hot-cold transfer press system (Twin Stack series). The SMARTLAM CHK is a twin-stack system that offers higher efficiency and increased output compared to conventional single-stack systems. By using two presses—one for heating and one for cooling—cycle times and energy consumption are significantly reduced. Depending on the material and laminate structure, up to 4 cycles per hour can be achieved with the SMARTLAM when processing 10 laminate layers per level. Ledjxwdmaspfx Ah Ushr It is possible to place multiple laminates side by side in a single cassette. In alternative short-cycle test operation, approximately 1–2 cycles per minute can be achieved with one laminate layer per cassette (without vacuum and without a pressurized preheating phase).

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! Lhsdpfeh Rkhnex Ah Ujr 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: used, MANUFACTURER Fagor MODEL AND TYPE SE4-1000-4300-2400 Mechanical Transfer Press with Coil Feed (TP5) YEAR 1994 Capacity 1000 tons Bed area 4300 mm x 2400 mm Slide area 4300 mm x 2400 mm Stroke 720 mm Shut height (min) 800 mm Shut height (max) 1200 mm Lhjdpfou Er Hxsx Ah Uor Speed 10 - 20 spm Adjustment 400 mm Approx. Height above floor 8296 mm Features Coil feed, 2 bolsters F-B onto t-track, hydraulic clamping on slide, Manual clamping on bolster Transfer Max transfer beam out 2352 mm Max transfer beam in 952 mm Distance from bolster to transfer rail 765 mm Feed height 760 mm Pitch 625, 800, 1000 Clamp in/out 225 mm Lift 0 - 200 mm Height of exit conveyor above bolster 660 – 770 mm Coil Feed Max coil weight 5000 kg Max coil width 1465 mm Coil o/d 1550 mm Coil i/d 508 mm Material thickness 0.5 – 1.5 mm Max load pitch 0 – 1000 mm Material feed height over bolster 760/850 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Ledpfex Ezkuex Ah Ushr Max format 790 x 560 mm : max speed 6,000 sheets / hr Top EFF specification High speed MABEG suction feeder : 6 heating zones : 3 x electronic servo longitudinal foil feeds : 3 x transverse foil feeds : 3 line hologram capability : non stop delivery

Condition: used, Year of construction: 1994, pressing force: 200 t, table length: 1,780 mm, PRESS DESIGN .. drive system: eccentric / crank .. frame design: H-frame, tie rod .. openings in uprights: yes .. table cushion: yes .. feedstock transport direction: left to right PRESS FORCES .. total force (nominal): 200 to PRESS TABLE .. table surface (left-right): 1780 mm .. table surface (front-back): 1300 mm .. opening in bed (left-right): 1445 mm .. opening in bed (front-back): 260 mm SLIDE .. slide force: 200 to .. table surface (left-right): 1500 mm .. table surface (front-back): 1100 mm .. stroke: 178 mm .. stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS) .. slide adjustment: 150 mm .. stroke rate (min.): 20 /min .. stroke rate (max.): 120 /min DIE CUSHION (TABLE CUSHION) .. number of cushions: 11 .. cushion force: 3 to TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 542 mm .. passline opening (free passage in side columns): 900 mm DECOILER .. design: twin reel .. sheet width max.: 260 mm .. coil weight max.: 2 to .. max. diameter of coil: 1500 mm .. mandrel expansion range from: 460 mm .. mandrel expansion range up to: 530 mm LEVELLER UNIT .. sheet width max.: 250 mm .. sheet thickness max.: 2 mm .. sheet thickness min.: 0.3 mm .. number of leveller rolls: 19 .. diameter of leveller rolls: 18 mm .. feed velocity min.: 5 m/min .. feed velocity max.: 60 m/min .. loop controls: yes STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 250 mm TRANSFER SYSTEM .. distance between tools, stroke X max.: 260 mm .. distance between tools, stroke X min.: 60 mm .. stroke Y fix: 55 mm .. Inner width clamping rails closed max.: 455 mm .. Inner width clamping rails closed min.: 205 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V Lhjdpfxjx Nd T Tj Ah Usr .. mains frequency: 50 Hz ATTACHMENTS (PRESSES) .. decoiler: yes .. leveller unit: yes .. strip feeder: yes .. gripper transfer system: yes + Coil feed line KOHLER with straightener KRE2 18.260/19 + Feeder KAISER KWV 250 + 2-axis gripper bars transfer SANDER with adjustable pitch + table cushion rail with various cushions and fillers (separate data sheet available)

Condition: good (used), Code: 0279 Lsdpfxjx I Nz Ho Ah Uehr Brand: ALBERTI V. Model: PCC 33/18 Continuous cycle hot press for veneering, furniture, doors, panels, composite materials and various Max working length 3300 mm Max working width 1800 mm Opening 200 mm N° 6 pistons diameter 100 mm Solid platens Diathermic oil heating Loading conveyor

Condition: like new (used), Year of construction: 2022, Manufacturer: ROVETTA / AIDA Lhodpox Idxmsfx Ah Usr Model: DFS-TE4-20000(2) 730-250 Press force: 2,000 tons Drive: SERVO Stroke: 800 mm Stroke rate: 50 rpm Ram adjustment: 400 mm Side opening: 3,650 mm Bolster area: 7,300 x 2,500 mm Ram area: 7,300 x 2,500 mm NORDA Transfer Transfer pitch: 0-1,250 mm Transfer opening min./max.: 700 - 2,740 mm Transfer stroke: 0-350 mm Millutensil coil line Material thickness: 0.5 – 3.0 mm Material width: max. 1,800 mm Decoiler load capacity: 20 tons

Condition: excellent (used), Year of construction: 2008, ram adjustment: 600 mm, pressing force: 2,000 t, stroke length: 700 mm, table length: 5,500 mm, table width: 2,500 mm, Type: Stamping press Manufacturer: Aida Model: S4-20000/5500x2500/LD-ET3 Nominal press force: 2000 ton SPM: 8-24 Nominal energy: 400 kJ Slide stroke: 700 mm Slide adjustment: 600 mm Open height: 1400 mm Clearance between uprights: 5970 mm Table dimensions: 5500 × 2500 mm Lower slide table dimensions: 5500 × 2500 mm Height of slide/ram carriage: 600 mm Opening in uprights: 3100 mm Main motor power: 250 kW Cushion force: 1500 kN Cushion stroke: 250 mm Press weight approx.: 390000 kg Normal slide rest position: Top Dead Centre Maximum flywheel speed: 421.6 rpm Lsdpfx Ahex Ifrze Ushr Maximum slide dimensions: 5500 × 2500 mm Max weight of upper die: 200 kN Power supply: 400 V, 50 Hz Minimum pneumatic supply pressure: 6 bar Hydraulic pressure in brake–clutch unit – min.: 68 bar Hydraulic pressure in brake–clutch unit – max.: 73 bar Transfer system: Transfer stroke: 0-1250 mm Maximum opening: 2500 mm Bar-closing stroke: 0-750 mm Lift stroke: 0-280 mm Internal clearance between closed bars: 1000 mm Pass-line height relative to bolster: 580 mm

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Lsdpfehtaaqsx Ah Ushr Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: good (used), Baier Geba Hot Stamping Press This machine is in very good condition and ready to use. This machine is from the popular hot stamping manufacturer Gebrüder Baier KG, manufactured in Germany. Description Lhodpfsx Hqnxjx Ah Ujr The Baier Geba hot stamping press is a press for hot stamping, embossing, and die-cutting paper and plastics. It’s a useful device in any advertising agency or digital printing house. The manually operated pressure is powered by only 230V. A powerful pressure with adjustable pressure ensures repeatability and very high pressure of the die against the material. The machine features a worktop with a slide-out function, adjustable embossing depth, and a heating plate with a thermostat. Specifications: Heating temperature control Heating plate pressure mechanism: mechanical Press force: 5000 kg Power consumption: 9000 W Power supply: 230 V Machine weight: 300 kg Plate size: 32 x 21 cm.

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) Lhedpfx Ahsu Nfttj Usr 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: reconditioned (used), functionality: fully functional, Technical data: • 4-station rotary table • Max. sealing area 350 x 250 • Max. blister depth 70 – 100 mm depending on product type • Sealing force 12,800 N • Sealing heater power 1.75 kW • Carton feeder • Package ejector • Carton forming unit • Cable with CEE 16A plug • Weight approx. 750 kg Lsdpefua Dcsfx Ah Uohr Machine available in all variants b, b-2, b-3, b-4.

Condition: excellent (used), Year of construction: 2008, Manufacturer: ROVETTA / AIDA Model: S4-20000 5500-2500-LD Press Force: 2,000 tons Stroke: 700 mm Strokes per minute: 8–24 1/min Ram Adjustment: 600 mm Side Opening: 3,100 x 2,700 mm Table Surface: 5,500 x 2,480 mm Ram Surface: 5,500 x 2,480 mm Height of Sliding Table: 600 mm Drawing Cushion: 1 unit Drawing Cushion Force: 1,500 kN Ledpfx Ahsx Idt Dj Ujhr Dimensions of Drawing Cushion: 850 x 1,260 mm Drawing Cushion Working Stroke: 250 mm NORDA Transfer Transfer Step: 0–1,250 mm Transfer Opening min. / max.: 1,000 – 2,500 mm Transfer Stroke: 0–280 mm Millutensil Coil Line Material Thickness: 0.6 – 2.0 mm Maximum Material Width: 1,600 mm Decoiler Capacity: 15 tons

Condition: like new (used), Year of construction: 2022, functionality: fully functional, ram adjustment: 400 mm, pressing force: 2,000 t, stroke length: 800 mm, table length: 7,300 mm, table width: 2,500 mm, Type: Stamping press Manufacturer: Aida Model: DSF-TE4-20000-730-250 Year of manufacture: 2022 Nominal press force: 2000 ton Energy at 15 spm: 630 kJ Lhjdpfx Aox Ifn Ash Ujr Energy at 28 spm: 390 kJ Strokes per minute: — full-revolution mode: 3–28 — endulum mode (at max. feed 105 mm): 3–50 Slide stroke: 800 mm Slide adjustment: 400 mm Maximum distance between slide and press table: 1200 mm Clearance between uprights: 7580 mm Slide dimensions: 7300 × 2500 mm Table dimensions: 7300 × 2500 mm Distance between side columns (front–back opening): 3650 mm Main motor power: 2 × 750 kW Slide-adjustment motor power: 30 kW Maximum upper die weight: 35000 kg Normal slide rest position: Top Dead Centre Total stopping time at 15 strokes/min: 799 ms Safety distance: 1278 mm Safety brake pressure: 105 bar Power supply (three-phase): 400 V, 50 Hz Minimum pneumatic supply pressure: 5.5 bar Transfer system: Transfer stroke, forward (adjustable): 0–1200 mm Opening/closing stroke for each side (bar travel, adjustable): 0–1020 mm Lift stroke (adjustable): 0–350 mm Internal clearance between bars in closed position: 700 mm Maximum opening between bars (bars fully open): 2740 mm Bar section dimensions: 220 × 220 mm

Condition: new, New Transfer press line from min. 300t up to max. 3500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Lhedpfx Ahef Rt Ubs Uer

Condition: used, Force 1600 tons Slide stroke 300 mm Distance adjustment between table and slider 10 mm Slide strokes per minute 75 spm Length of a rod 920 mm Closed height (min distance table–slide) 660 mm Table dimensions 940 × 1200 mm Table height above floor level 450 mm Lsdpfsx Ek Ntjx Ah Ushr Slide dimensions 860 × 910 mm Lateral window (h/w) 560x600 mm Main motor 110 kW Dimensions 5060x3940x5125 mm Press weight 120 tons

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Lhedpfx Ajfh Tmmoh Uor Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: excellent (used), functionality: fully functional, Brief description Table dimensions: 3000 mm x 1300 mm Number of cylinders: 6 Pressing force: 90 tons Table opening: 400 mm Lhsdpjxvx Ezefx Ah Uor Heating with hot water Boiler: 20,000 kcal/h

Condition: good (used), Year of construction: 2005, Year of manufacture: 2005 Condition: functional Model:Schulze Air press x Double pneumatic transfer press, semi-automatic model. The print can be adjusted using an air gauge, which also ensures the same pressure regardless of the quality of the garment. Digital temperature and time control. Automatically opens when the transfer is finished. Bottom plates are available in different sizes. - Print size: 400 x 500 - Dimensions: 1.67 x 0.74 x 0.98 m - Weight (including packaging): 170 kg - Power: 10 A / 230 V - Temperature: max. 220 °C Lhodpjudydgjfx Ah Usr - Temperature accuracy: ± 0.5% - Power: 2.4 kW - Heating time: 12 min. at 180 °C - Timer range: max. 9 min., 59 sec. - Operating pressure: 2490 kg

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Lsdjr I E Itepfx Ah Ujhr Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Year of construction: 1968, condition: ready for operation (used), An OTT heating plate press is available. Pressing area X/Y: 2250mm/1200mm, heating plates: 2, connected load: 14kW, pressing force: approx. 65t, max. pressing height: 300mm, machine dimensions X/Y/Z: approx. 2600mm/1350mm/1800mm, weight: approx. 3300kg. An on-site inspection is possible. Lodpfx Ahsxd Auij Uehr

Condition: good (used), Thrust 100 ton. Thrust points No. 2 110 mm stroke Slide adjustment 80 mm. Press tables 1,200 x 600 mm Lhodoq N Et Nspfx Ah Uer Lateral passage 460 m Hits per min. 40,180 Min. 460 mm Transfer DGM

Condition: used, Hot Press - Tiger TM 6B Ljdpexvy Siofx Ah Uehr Working dimensions: 3000 x 1300 mm Pressure: 90 tons Heating system: Hot water supply No. of cylinders: 6

Condition: used, Prägepresse / Hot Foil Stamping Press Ljdpfot Drnxjx Ah Ushr Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2000, Thrust: 2000 TON. RATED CAPACIT Model: S4-2000.5000-2500-LD TYPE Lhedpfxovm Eire Ah Ujr Year of construction: 2000 YEAR OF CONSTRUCTION Table size: 5,000 x 2,500 mm TABLE DIMENSIONS Slide adjustment: 400 mm SLIDE ADJUSTMENT Strokes per min.: 10-16 c/min. CONTINUOUS SPEED (variable) Stroke: 800 mm SLIDE STROKE Mold clearance at BDC: 1,200 mm SHUT HEIGHT Hydraulic Safety: present Hydraulic Safety