Used Hub Spindle for sale (13,772)

Condition: used, Year of construction: 1992, SCHÜTTE SF 26 DNT Max. bar diameter round / square: 26 / 19 mm Spindle pitch circle diameter: 270 mm Bar feed: 125 mm Longitudinal slide travel (total / work): 80 / 63 mm Cross slide travel (total / work): Upper: 40 / 25 mm Middle: 40 / 25 mm Lower: 50 / 31 mm Spindle speeds (stepless): 530 – 3,750 rpm Main times (stepless): min. / max. 0.72 – 100 s Secondary times: 0.90 – 1.1 s Creep speed: 3 rpm Main drive: 22 kW Kljdpfx Asyxcvxognet Dimensions (incl. bar guidance): approx. L x W approx. 7.2 x 1.6 m Weight: approx. 6.8 t Voltage: 400 V / 50 Hz Scope of delivery: Machine SCHÜTTE SF 26 DNT bar feeder

Condition: used, Year of construction: 1988, SCHÜTTE SF 32 Maximum bar diameter round / square: 32 / 22 mm Spindle pitch circle diameter: 300 mm Bar feed: 125 mm Longitudinal travel (total / working): 100 / 80 mm Cross-slide travel (total / working): Ksdpfx Aoyxcr Hjgnelt Upper: 50 / 33 mm Center: 50 / 30 mm Lower: 60 / 37.5 mm Spindle speeds (49 steps): Range I: 450 – 3,150 rpm Range II: 200 – 1,400 rpm Workpiece speeds per cycle: Normal: 60 – 425 Short: 33.5 – 236 Long: 95 – 670 Main times (35) per spindle revolution: Min. / Max.: 0.63 – 200 s Normal: 1.12 – 125 s Short: 0.63 – 71 seconds Long: 1.8 – 200 seconds Secondary times: 0.7 – 1.25 seconds Main drive: 18.5 kW Dimensions (incl. bar feeder): approx. L x W 6.5 x 1.5 m Weight: approx. 8.3 t Voltage: 400 V / 50 Hz Scope of supply: SCHÜTTE SF 32 machine Bar loader

Condition: used, Year of construction: 1988, SCHÜTTE SF 32 Maximum bar diameter round / square: 32 / 22 mm Spindle circle diameter: 300 mm Bar feed: 125 mm Longitudinal travel (total / working): 100 / 80 mm Cross slide travel (total / working): Top: 50 / 33 mm Middle: 50 / 30 mm Bottom: 60 / 37.5 mm Spindle speeds (49 steps): Range I: 450 – 3,150 rpm Range II: 200 – 1,400 rpm Workpiece feed per cycle: Normal: 60 – 425 Kledpfxeyxcuuj Agnot Short: 33.5 – 236 Long: 95 – 670 Main times (35) per spindle revolution: Min. / Max.: 0.63 – 200 s Normal: 1.12 – 125 s Short: 0.63 – 71 s Long: 1.8 – 200 s Secondary times: 0.7 – 1.25 s Main drive: 18.5 kW Dimensions (incl. bar guide): approx. L x W 6.5 x 1.5 m Weight: approx. 8.3 t Voltage: 400 V / 50 Hz

Condition: used, Year of construction: 2002, Technical Details: SCHÜTTE SG 18 Max. bar diameter round / square: 18 / 13 mm Spindle pitch circle diameter: 180 mm Bar feed: 80 mm Longitudinal slide travel (total / working): 63 / 50 mm Cross slide travel (total / working): 32 / 20 mm Spindle speeds (infinitely variable): 800 – 10,000 rpm Main cycle times (infinitely variable): min./max. 0.24 – 45 s Secondary times: 0.30 s Main drive: 11 kW Kodpjymdd Sjfx Agnslt Feed motor torque: 18 Nm Dimensions (including bar guide): approx. L x W approx. 5.5 x 1.3 m Weight: approx. 5 t Voltage: 400 V / 50 Hz Operating hours: 14,304 h Scope of delivery: - Bar feeder Pra 52 P IEMCA - RUEZ KF0WW2/312 DAS, year 2002

Condition: new, spindle passage 230 mm turning diameter over bed 970 mm turning diameter over slide rest 720 mm Control Fanuc OiTD turning length 2200 mm total power requirement 37 kW Year of manufacture 2013 Control: Fanuc OiTD Other controls possible Turning length (mm) 2200 Max. turning diameter (mm) 970 Kodpfxsyqupae Agnslt Max. turning diameter over slide (mm) 720 Spindle diameter (mm) 230 Diameter range (mm) 850 Speed: 500 kW 37 Voltage: 400V Hz 50 Including: 4-jaw chuck, Ø 800 mm rear Pneumatic 3-jaw chuck, Ø 600 mm front The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, PTP VPU 1 Conventional milling machine Table dimensions: 260x1000mm Taper: 40mm X axis: 500mm Y axis: 300mm Z axis: 400mm Dimensions: 170x130x145mm Variable speed Vertical and horizontal use Power supply Head adjustable in degrees With cooling pump Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. PTP VPU 1 Conventional Milling Machine Table dimensions: 260x1000mm Cone: 40mm X axis: 500mm Y axis: 300mm Z axis: 400mm Dimensions: 170x130x145mm Variable speeds Can be used vertically and horizontally Power supply Head adjustable in degrees With cooling pump Location: Hamont-Achel, Belgium Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. PTP VPU 1 conventional machines Table dimensions: 260x1000mm Cone: 40 mm X axis: 500 mm Y-axis: 300 mm Z-axis: 400 mm Dimensions: 170x130x145mm Variable speeds Can be used vertically and horizontally Power supply Head adjustable in Grad With vacuum pump Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Kedpfxjrzbkts Agnslt Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen

Condition: used, Year of construction: 1980, Martin Spindle Moulder Model: Martin T 23 Year of manufacture: 1980 Spindle diameter: 30 mm Spindle stroke: 145 mm Max. tool diameter: 250 mm Pole-changing motor: 4.7/5.7 kW 2 speeds: 3000, 6000 rpm Table size: approx. 940 x 1100 mm Klodpfx Agoy Rzytenot Table height: approx. 850 mm Automatic motor brake Emergency stop switch Weight: approx. 800 kg

Condition: excellent (used), Year of construction: 1999, Robust Tilting Spindle Moulder T 26, tiltable from -45 to +45 degrees Spindle moulder in excellent specification. A real treat for every Martin enthusiast! Pole-changeable drive motor 5/6 kW with automatic motor brake Forward/reverse rotation Tilting angle electrically adjustable from -45° to +45° Height adjustment up to 150 mm, electrically adjustable When adjusting the height, a correction factor for the tilt angle is displayed on the upper readout, which is then set on the stop, allowing precise settings based on drawings Four spindle speeds: 3,000 / 4,500 / 6,000 and 9,000 rpm Spindle diameter 30 mm, quick-change spindle with torque wrench (Dornfix system) Comfort fence T226 with digital readouts for total adjustment and individual infeed jaw, as well as cutter diameter input—cutting depth is then calculated automatically Fence with lifting feature can be swung away (for curve milling work) Table opening via eccentric rings, electrically adjustable, three additional insert rings Table extension on right and left with extendable workpiece support Support can be extended up to 700 mm Table length approx. 2,400 mm Fold-away fence for slot mortising Aigner Centrex workpiece pressure unit Aigner integral fence: left 500 mm, right 600 mm New Steff 2048 4-roller feed unit with 8 speeds, forward/reverse rotation Kljdpfxey Ig Iws Agnjt Feed socket switchable via control panel Comfort stand with electrically height-adjustable feed support, which can be swung away for machine setup and locked back in position afterwards Zeromaster for easy spindle height setup Two extraction ports, each 120 mm Compressed air connection 6 bar Emergency stop switch Some parts of the machine have been newly painted Feed unit renewed Drive belts replaced Operating manual CE-marked Dimensions approx. 3,000 x 1,500 x 1,830 mm (LxWxH). Weight approx. 1,800 kg. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse—see “more offers from this dealer.”

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Ksdpfxoyi A Tds Agnelt Storage location: Nattheim

Condition: good (used), Year of construction: 1973, Centre height: 150 mm Centre distance: 760 mm Max. turning diameter over bed/cross slide: 300/165 mm Klsdpfxjyu R Nko Agnet Spindle bore: 32 mm Spindle mount, short taper per DIN 55027: Size 5 Quill taper of tailstock: MT 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 inch threads: 75 - 2.5 TPI 19 module threads: 0.1 - 1.75 module 19 diametral pitch threads: 70 - 4 DP Electric drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Required space: 1800 x 770 x 1300 mm

Condition: good (used), Centre height: 125 mm Distance between centres: 800 mm Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Infinitely variable spindle speeds: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm Kjdpfoyu R H Nsx Agnslt 44 inch threads: 4 - 112 TPI Electrical connection: 380 V, 0.7/1.4 kW Required space: Approx. weight: 500 kg

Condition: used, Year of construction: 1977, centre height 450 mm Kodpfjy Hl N Rox Agnslt centre distance 6150 mm spindle bore 140 mm turning diameter over bed 900 mm turning diameter over slide 660 mm spindle drive 15 kW external dimensions Breite 1750mm length 9000 mm height 1650 mm weight 8000 kg spindle speed: 11-500 UpM With a chuck, collet, and faceplate

Condition: ready for operation (used), A cam-controlled automatic lathe is offered. Working area bar capacity: 60mm, turret: 6 stations (axial), cross slides: 4 (radial), control: mechanical cam control. Equipped with bar guiding device, foldable safety cover, integrated coolant system, chip tray, various tool holders. Weight: approx. 2350kg, overall dimensions X/Y/Z: approx. 2100mm/1250mm/1750mm (dimensions without bar guide). Inspection possible by arrangement. Kedpfey Tx Srox Agnjlt

Condition: ready for operation (used), Offered is a cam-controlled automatic lathe. Bar capacity: 29mm, speed range: max. 3750rpm, main drive: incrementally adjustable via change gears, number of tool slides: 4, control: cam control. Equipped with bar loading magazine, coolant device, tool turret, various tool holders, change gear set. Note: Sale is without extraction system. Weight: approx. 2200kg incl. magazine, overall dimensions X/Y/Z: approx. 5500mm/1300mm/1750mm. Inspection possible by arrangement. Kljdey Tx N Repfx Agnst

Condition: used, machine/vehicle number: MR003046, Used tenoning machine, in good condition. Immediately ready for use. Price ex Staphorst. Manufacturer: Goma Van Groeneweghe. Machine equipped with saw and vertical spindle. Kodsy I N Nkopfx Agnolt Technical specifications: - Serial number: 248

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX Klodpfjvh Naqsx Agnjt total power requirement 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant

Condition: used, Year of construction: 1982, Center height: 220 mm Center width: 1250/1300 mm Swing diameter: over bed 440 mm Spindle bore: Spindle mount: Tailstock taper: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/transverse 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space required: 3400 x 1400 x 1300/1700 mm Kodpfx Aovzn Itognjlt Weight: approx. 2700 kg

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). Kljdpfx Ageywtxbsnot The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: new, Year of construction: 2025, Spindle swivels: + 45.5° to -45.5° Height adjustment: electric Swivel adjustment: electric Stop adjustment: electric Height display: digital Pivot angle display: digital Milling stop display: digital Spindle diameter: Speeds: infinitely variable from 900 - 12000min¯¹ Power consumption: 7.5 kw Motor brake: Yes, automatic Suction connection: 3 x 100 mm, 1 x 120 mm Ksdpfoiqg N Njx Agnjlt Machine length: 2540 mm Machine width: 1195 mm Weight: 950 kg

Condition: excellent (used), CATALOG NO. 7911 TECHNICAL DATA - Number of spindles: 29 pcs - Distance between outermost spindles: 900 mm - Spindle pitch: 32 mm - Table surface: 700x1220 mm - Table height: 930 mm - Pneumatic clamps: 3 pcs - Drilling vertically, horizontally, and at an angle - Vertical/horizontal operation – pneumatic table adjustment - Pneumatic lifting of drilling head - Dimensions (L/W/H): 1400/1050/1400 mm Kljdpfx Agoy Tw Swsnjt - Weight: 744 kg ADVANTAGES – Manufactured by Italian brand SCM – For 29 drills – Not repainted – Very good condition – Used drilling machine Net price: 5,900 PLN Net price: 1,400 EUR at an exchange rate of 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER: 6857 TECHNICAL DATA - Spindle diameter: 30mm - Spindle height: 140mm - Interchangeable spindle - Height adjustable (up/down) - Guide fence - 4 spindle speeds + right/left rotation: 3000, 4500, 6000, 9000 RPM - Table size with extension: 1970x990mm - Motor: 5.2kW - Extraction port diameter: 1x80mm, 1x120mm - Dimensions (L/W/H): 1920x1050x1130mm - Weight: 550kg ADVANTAGES Kedpfsy Twynsx Agnjlt – German manufacture – Used milling machine – Very good condition Net price: 11,900 PLN Net price: 2,830 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of major exchange rate fluctuations the price may change)

Condition: excellent (used), CATALOG NUMBER 7003 Technical Data: - Spindle diameter: 25mm - Spindle working height: 80mm Ksdjy Tuddjpfx Agnjlt - Interchangeable spindle - Spindle locking - Height adjustable (up/down) - Original cast iron fence - 2 speed options + right/left rotation - Table dimensions: 1000x800mm - Motor: 3kW - Dimensions (LxWxH): 1280x860x1100mm - Weight: 465kg Features: – Bulgarian manufacture – Very good condition – Used milling machine Net price: 5,500 PLN Net price: 1,300 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change due to fluctuations in the exchange rate)

Condition: used, Year of construction: 1989, SCHÜTTE SF 32 DNT Max. bar diameter round/square: 32 / 22 mm Spindle circle diameter: 300 mm Kljdpfjyxckcox Agnot Bar feed: 125 mm Longitudinal slide travel (total/operational): 100 / 80 mm Cross slide travel (total/operational): - Lateral: 50 / 33 mm - Center: 50 / 30 mm - Lower: 60 / 37.5 mm Spindle speeds (stepless): 450 – 3,150 rpm Main times (stepless): min. / max. 0.8 – 100 s Secondary times: 1 – 1.25 s Creep feed: 3 rpm Main drive: 22 kW Dimensions (incl. bar feeder): approx. L x W 7.3 x 1.6 m Weight: approx. 8.3 t Voltage: 400 V / 50 Hz Contents consist of: SCHÜTTE SF 32 DNT machine Bar loader

Condition: repair required (used), Year of construction: 1991, Tilting spindle moulder Manufacturer: Panhans Model: 240 Year of manufacture: 1991 Ksdpfxjx Tgtws Agnolt The electronic angle value detection (actual value) is not functional. Table: 135 x 80 cm Power: 11 kW Tilting range: -5° to +45° Angle adjustment: Electric Height adjustment: Electric Spindle speeds: 3/4.5/6/9,000 rpm Left/right rotation: Yes Motor brake: Yes Weight: approx. 780 kg Incl. power feed

Condition: used, mileage: 1,250,429 km, power: 353 kW (479.95 HP), first registration: 09/2014, fuel type: diesel, empty load weight: 9,750 kg, maximum load weight: 15,820 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,500 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cabin, compressed air brake, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, * German vehicle * One owner * Condition as per photos * BDF swap chassis body * Very rare, mechanical lifting multi swap system * Suitable for all containers up to 7.82 m * Adjustable underrun protection * Trailer coupling * Permissible total weight: 40,000 kg * Large cab with bed * Refrigerator * Auxiliary heater Kodpfswzxdwex Agnjlt * Air conditioning * Multimedia radio + navigation * Automatic transmission * Attention assist * Hill start assist * Emergency brake assist * Air-suspended comfort driver's and passenger's seats * Lane assist * Seat heating * Multifunction steering wheel * Adaptive cruise control * Brake assist * Electric windows * Differential lock * Rear-steer lift axle * Air suspension with raise/lower function * Roof hatch * ABS/ASR/ESP * Night lighting * Sun visor * Roof spoiler * Electrically heated mirrors * Engine brake * CB radio * Daytime running lights * Wheelbase: 4,500 mm + 1,300 mm * Gross vehicle weight: 26,000 kg * Unladen weight: 10,150 kg * Payload: 15,850 kg Should you require a new TÜV inspection, we are happy to provide an offer through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and assessment of the goods to avoid any misunderstandings about the condition and suitability for the buyer. Inspections and assessments are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. No liability is assumed for errors or incorrect details in the listing. The buyer is obliged to independently verify the condition and equipment of the goods / vehicles. Subject to changes, prior sale, and errors.