Used Hull Machine for sale (65,215)

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 1,800 kg, table width: 800 mm, table length: 920 mm, overall weight: 14,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 33, Control system: HEIDENHAIN iTNC 530 with smarT.NC Nodpfx As Aba Thjh Ssdc Tool interface: HSK-A63 Machining: 3-axis simultaneous Special equipment: - 3D touch probe system - Tool measurement - Electronic handwheel - Roller-type roof guard FREE DELIVERY!

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 108296200602, input voltage: 400 V, Year: 2020 • the machine is in production Status: very good, functional Ndodpfxj Aa Iude Ah Ssc Specifications: • speed: 300 packages / h • maximum height on pallet: 1400 mm

Condition: like new (used), Year of construction: 2018, operating hours: 240 h, functionality: fully functional, travel distance X-axis: 460 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 410 mm, feed rate X-axis: 48,000 m/min, feed rate Y-axis: 48,000 m/min, feed rate Z-axis: 48,000 m/min, controller manufacturer: siemens 828D, controller model: 828D, total height: 2,602 mm, total length: 3,350 mm, total width: 2,265 mm, table width: 320 mm, table length: 320 mm, table load: 250 kg, rotational speed (max.): 200 rpm, overall weight: 6,200 kg, spindle speed (max.): 18,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 60 mm, spindle motor power: 23 W, spindle nose: hsk63, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Due to the cessation of business operations, we are offering this like-new Hardinge H320 horizontal machining center, manufactured in 2018. Model: H320 Serial number: GHLB7G0001 Date of manufacture: 05/31/2018 Ndjdpfxj Aazdxe Ah Sec Supply voltage: 400 V Number of phases: 3 Weight: 6200 kg Cooling on the ball screw spindles Spindle cooled Glass scales on all axes High-speed 4th axis with direct drive motor, 200 rpm Scraper chip conveyor It is also possible to take over the tool holders and machine clamps. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, mileage: 485,000 km, Year of manufacture: 2000 Nedszkrkmspfx Ah Sedc Year of design: 2000

Condition: reconditioned (used), MOSCA KPM 131 Pallet Strapping Machine with Swivel Turntable / Roller Conveyor Description For sale is a used MOSCA KPM 131 pallet strapping machine with an integrated swivel turntable roller conveyor and pallet centering system. The system is designed for the automatic strapping of palletized products and features an integrated swivel turntable roller conveyor with a diameter of approximately 1,800 mm. The swivel turntable allows the pallet to be rotated within the system and positioned according to the desired strapping direction. The machine is suitable for Euro and industrial pallets with pallet runners in the direction of travel. A strapping head is adjustable, allowing for different strapping positions. Machine Data • Manufacturer: MOSCA • Type: KPM 131 • Year of Manufacture: 1996 • Control System: Siemens S5 • Throughput Width: max. 1,200 mm • Throughput Height: max. 1,600 mm • Integrated Swivel Turntable Roller Conveyor: Ø approx. 1,800 mm • Pallet Centering System • Adjustable Strapping Head Strapping Technology • Band Tension: continuously adjustable: 200–2,000 N • Band Speed: 4.6 m/s • Sealing Method: Friction Weld Seal • Band Guide Positions: 440 mm / 625 mm Press • Pressing Force: up to max. 50,000 N • Pressing Force adjustable via potentiometer • Drive via pole-changing geared brake motor • Rapid Traverse Speed: 150 mm/s • Pressing Speed: 37 mm/s Control Panel Ndodpfx Ajypwm Ejh Sjc • Width: approx. 1,200 mm • Depth: approx. 650 mm • Height: approx. 850 mm Condition / Inspection / Integration Before delivery, the machine will be assembled in our workshop in Velbert and completely inspected mechanically and electrically. The strapping head and all relevant machine functions will be tested. Necessary wear parts will be replaced after technical inspection and in accordance with the agreed scope of services. After completion of the work, a functional test of the complete system will be carried out. Upon request, we will also take over the assembly, commissioning and integration of the MOSCA KPM 131 into the customer's existing production or conveyor line. This can include, among other things, the implementation of the necessary electrical interfaces, signal exchange and adaptation to the existing conveyor technology after prior technical coordination. A functional test or pre-acceptance at our plant in 42551 Velbert is possible by appointment. Transport, assembly, commissioning and integration can be offered separately. Subject to prior sale and errors.

Condition: used, Year of construction: 2000, functionality: fully functional, pointing milling machine für Stangen carbide turnover plates 4 Stück working area Rund, Profil+vierkant mm working range 80 (100) an 25 mm milling drive 380/420V, 18,5 KW, 50 Hz kW revolutions per minute Fräsantrieb: 1465 U/min . clamping devices hydraulic pneumatic hydraulisch infeed device hydraulisch ca. 5 lfdm x 300 mm hydraulic power unit Rexroth tank 250 l coolant tank mit Spänekasten l switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 +++++ Please note: Nedpjg Akgtefx Ah Sjdc The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1990, functionality: fully functional, weight 4 t X - Y + Z-axis each 410 mm kN control Fanuc Axis 4 Njdpfx Ajuu S R Ujh Sjdc

Year of construction: 2021, condition: used, functionality: fully functional, T-nut inserting machine for Large Flange T-nuts Nedpjzbu R Eofx Ah Sodc

Condition: good (used), functionality: fully functional, - Brand: JUNG - Model: FD3 surface grinder - X-axis travel: 500mm - Y-axis travel: 200mm Nsdpe Aa Dlxefx Ah Sjdc - Hydraulic feed for X-axis - Automatic feed for Y-axis - Max. grinding wheel diameter: 220mm - Dust extraction system - Complete with attachments and grinding wheels.

Condition: new, Benchtop drill press OPTIMUM D 23 Pro-Set OPTIdrill - Exhibition model - ----- Technical data ----- Number of speeds: 12 steps, Speed range: 200 - 2,440 rpm, Spindle stroke: 80 mm, Arm reach: 180 mm, Table size: 280 x 245 mm, Njdj Aaz Ttepfx Ah Sjdc Max. drilling capacity in steel: 25 mm, Motor: 750 watts, Column diameter: 73 mm, Dimensions (L x W x H): 615 x 330 x 1,015 mm, Weight: 63.5 kg, Spindle mount: MK 2 Benchtop drill press with V-belt drive - Industrial motor - User-friendly safety switch according to IP 54 - Digital depth-of-drill and speed display integrated into the housing - Separate emergency stop switch - Precision-bored spindle - Safety electrical system in 24 V DC - Guaranteed concentricity accuracy less than 0.02 mm, measured in the drill chuck - Drilling spindle with precision ball bearings - High-quality quick-change drill chuck - Depth stop - Precisely machined, stable drill table with diagonally running T-slots and a surrounding coolant channel - V-belt cover with safety switch - One-piece, die-cast aluminum spindle lever with soft-grip handles - Large, height-adjustable protective shield with safety switch - Heavy-duty design of the entire machine - GATES quality belts - Right/left rotation -- Scope of supply -- Quick-change drill chuck 1 - 16 mm Morse taper MK 2 / B16, T-slot wedges Special set including machine vise BMS 100 - New exhibition model -

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 221363, working width: 400 mm, passage height: 250 mm, total length: 1,300 mm, total width: 1,070 mm, total height: 1,450 mm, height adjustment type: mechanical, overall weight: 600 kg, working height: 900 mm, compressed air connection: 6 bar, extraction nozzle diameter: 100 mm, type of input current: three-phase, power: 8.73 kW (11.87 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 250 mm, workpiece width (max.): 400 mm, empty load weight: 580 kg, input current: 16 A, Equipment: emergency stop, rotational speed infinitely variable, This used cross-cutting machine, equipped with one brushing unit, is designed for creating textures on wooden surfaces. The combination of the cross-cutting unit and the brushing unit allows for the creation of various effects, including authentic band saw textures and other natural surface patterns. The machine features a TAP function that enables the application of a random effect to the workpiece. This is achieved using five separate tapping heads above the sanding belt. A compressed air connection is required for the operation of this function. Nsdj Aazymspfx Ah Sedc By adjusting the transport speed, the settings of the cross-cutting unit, and the brushing unit, the intensity of the process can be easily controlled. This allows for the creation of a wide range of textures and finishes, depending on the desired end result. The machine is suitable for processing various wooden products, including wooden floors, wall panels, furniture components, doors, and other wooden products where a distinctive surface texture is desired. This particular machine is offered as a used machine, is in very good condition, and is immediately available. For additional information, technical specifications, or photos, please contact us.

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Ndjdpfxozil Uie Ah Soc Technical data: Fmax: 50 kN Vmax: 1500 mm/s Working area height max. 1370 mm Working area width 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic unit 280 bar Footprint: 415 cm² Clamping device / specimen holder available (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: B59188, total width: 62 mm, total height: 135 mm, total length: 83 mm, overall weight: 158 kg, input voltage: 230 V, input frequency: 50 Hz, The Mercury TP-702RS is based on the Mercury TP-702 and equipped with specially designed components. The machine is suitable for strapping small or round products, such as plastic pipes, steel bars, and hardwood elements. The TP-702RS can strap packages from 40 mm width × 10 mm height, or round bundles from Ø 32 mm when bundling 2 pieces. Thanks to its reliable operation and high strapping speed, this machine is ideal for applications involving small or round products. Ndsdpfx Ae Adq Eash Soc

Condition: used, Year of construction: 2020, Spray coating machine Manufacturer: Homag Type: PROFI GSF100/P/13 Year of manufacture: 2020 Technical data Spray machine for automated coating of furniture components, doors, stairs, and interior design elements with water-based or solvent-based paints. - Sled runner with a spray arm to accommodate four spray guns - Workpiece transport with a vacuum conveyor belt with additional paper support - Feed speed: 1 - 4.5 m/min - Average coating speed: 1.5 - 2.5 m/min - Working height: 900 mm - Extraction volume: approx. 10,000 m³/h - Diameter of extraction nozzle: 350 mm - Electrical connection power (without additional equipment): 10 kW - Compressed air consumption (without spray application): approx. 150 nl/min Workpiece parameters Workpiece width: 100 - 1300 mm Workpiece length: 300 - 3000 mm (without additional workpiece support) Workpiece thickness: 5 - 60 mm Workpiece weight: max. 80 kg Workpiece material - Chipboard, MDF and HDF boards - Solid wood components - Lightweight panels - The difference in height between workpieces may be a maximum of 2 mm Coating material - Paint based on water or solvent Electrical parameters - Operating voltage 400 volts, 50 Hz Roller table for machine infeed/outfeed - Powered roller table for automatic transport of workpieces Mobile paper roll trolley Njdpfxs Adr Hxo Ah Sjdc - For quick changing of the unwinding paper roll Touchscreen operation - Machine operation is performed via a touchscreen control panel, which is ergonomically positioned on the operating side of the machine. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, functionality: fully functional, operating hours: 7,996 h, power: 10.3 kW (14.00 HP), controller manufacturer: HOLZ-HER, actuation type: electric, Equipment: documentation/manual, For sale, directly from our kitchen and interior production facility. Compact vertical CNC woodworking center for drilling, milling, and grooving sheet material. The machine is offered including the tools, manuals, and electrical diagrams listed below. MACHINE DETAILS • Brand: HOLZ-HER Maschinenbau GmbH, Austria • Model: Evolution 7405 4mat - BAZ19V5 • Year of construction: 2019, invoice and commissioning in 2020 • Control/software: CAMPUS 7.5.3.10 Nodps Ab Uzasfx Ah Sodc • Vacuum pump: Becker VT 4.8 • First owner • Automatic central lubrication • 2D barcode scanner USAGE DETAILS Meter readings as of October 1, 2026: • Machine operating hours: 7,996 hours • Active feed ("Vorschub aktiv"): 598 hours • Workpiece counter: 22,887 • Tool changes: 21,584 • Last maintenance on July 2026, complete history available INCLUDED TOOLS • 1 left-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø8 mm, length 22 mm • 1 right-hand cutting milling cutter Ø10 mm, length 22 mm • 1 drill Ø35 mm, length 15 mm • 5 drills Ø5 mm, length 25 mm • 1 drill Ø8 mm, length 35 mm • 1 drill Ø10 mm, length 35 mm • 1 drill Ø10 mm, length 90 mm • 5 drills Ø8 mm, length 15 mm • 1 saw blade Ø120 mm, thickness 4.5 mm DOCUMENTATION • Manuals available • Electrical diagrams available • Machine software installed on the CNC SALE AND PICK-UP The machine is still operational (located in the Anzegem area) and can be demonstrated by appointment. Availability and pick-up by arrangement. Dismantling, loading, and transport are not included. Demo video available upon request. Interested? Contact us for additional information or to schedule a viewing.

Condition: used, Zwick / Roell Universal testing machine / Material testing machine Zwick / Roell ProLine Z005 Universal Testing Machine Nodpfx Ahozfy Ivs Sodc 5 kN testing machine for tensile, compression, and material testing For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile tests, compression tests, material testing, component testing, quality assurance, research and development, and laboratory applications. Technical data Manufacturer: Zwick / Roell Type: ProLine Z005 / 5 kN ProLine Type of device: Universal testing machine / Material testing machine Year of manufacture: 2016 Made in Germany Maximum testing force: 5 kN Load cell: Zwick Xforce P Rated force of load cell: 5 kN Start of measurement, accuracy class 1: 20 N Start of measurement, accuracy class 0.5: 100 N Nominal measuring range: 0.06 mm Machine dimensions: approx. 917 x 439 x 1331 mm (W x D x H) Frame width: approx. 720 mm Installation width of frame: approx. 770 mm Testing space width: approx. 440 mm Machine weight: approx. 200 kg Weight of load cell: approx. 0.65 kg Mains connection: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Measuring module: DCSC Measuring range: 0.2 % to 165 % of the nominal measuring value Measurement value acquisition rate: max. 10 kHz Measuring input: Differential input Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Connection type: 4- and 6-conductor technology Nominal sensitivity: 2 mV/V Connection thread for load cell: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Degree of protection of load cell: IP54 Load cell Type: Xforce P Rated force: 5 kN Working force max.: 150 % of Fnom Limit force: 150 % of Fnom Breaking force: 300 % of Fnom Limit transverse force: 100 % of Fnom Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Equipment Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Electronic force measurement Machine electronics on the side of the load frame PC system / testing software as shown in the pictures Accessories as shown in the pictures Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Incoming goods inspection Research and development Laboratory applications Condition Used Optical condition as shown in the pictures Scope of delivery 1x Zwick / Roell ProLine Z005 Universal Testing Machine 1x Xforce P 5 kN Load Cell 1x DCSC Measuring Module PC system / Software as shown in the pictures Accessories as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Year of manufacture: 2020 Professional handheld measuring system for precise 3D measurements directly in the production environment. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system, including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a measuring room, without complex setup, and without specialized CMM knowledge. The device is ideally suited for manufacturing companies, quality assurance, initial sample inspection reports (ISIR), in-process controls, and reverse engineering. Technical data – KEYENCE XM-C1000 / XM-H1000 (XM series) Measuring system (general) Ndjdezii Dnjpfx Ah Ssc Feature: Measuring range (XYZ) approx. 600 × 300 × 200 mm (depending on the configuration) Measuring accuracy ±(8 + L/80) µm (L = measuring length in mm) Repeatability ±3 µm (typical) Resolution 1 µm Measuring principle - Optical tracking with camera-based detection Calibration - User calibration possible with calibration sphere CAD comparison - Directly on the device (STEP, IGES, etc.) Export formats - PDF, Excel, CSV, DXF Tolerance evaluation - Automatic with color comparison XM-C1000 – Control and evaluation unit (controller) Component: Display - 15-inch touchscreen Connections - USB, LAN, HDMI, power connection Storage options - Internal + USB export Software functions - Measuring, CAD comparison, report generation Operation - Touchscreen + button operation Languages - Multilingual (including German) XM-H1000 – Handheld measuring probe Feature: Probe type - Handheld with push button Feedback - LED status indicator, vibration signal Probe tip - Replaceable, various tips available Tracking - Detected via the controller's camera system System properties Feature: Operating temperature: 10 – 35 °C Voltage supply: 100–240 V AC, 50/60 Hz System size (complete) - approx. 800 × 600 × 800 mm (depending on the configuration) Weight (total system) - approx. 25–40 kg (depending on the configuration) Mounting - On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld measuring probe XM-C1000 (controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & delivery: Shipping by freight forwarder Self-collection possible by arrangement. International shipping possible upon request. If you have any questions, require further information, or would like to arrange a viewing appointment, please do not hesitate to contact us. (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, functionality: fully functional, cutting range round steel at 90°: 320 mm, 2 units – Behringer HBE 321 A dynamic new machines, available for immediate delivery from stock. Attention: You can receive up to 15% in funding if you replace an old sawing machine with a new one! Equipment: Auto-Feed Control AFC Pro (item no. 33) Active cutting monitoring (item no. 22) BEHRINGER screw-type chip conveyor (item no. 105) Automatic bar-end detection (item no. 535) Ndsde Adpvqepfx Ah Ssc Lighting (item no. 941)

Condition: used, SincoTec Type: POWER SWING 20 kN POWER SWING 20 kN resonance testing system Sincotec Power Swing 20 kN resonance testing system Manufacturer's maintenance performed Ndsdozii A Dopfx Ah Ssc General information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The testing system was used in a single-shift operation, and all maintenance work was performed regularly by the manufacturer. Special features: Robust construction for continuous operation Precise resonance testing up to 20 kN Manufacturer's maintenance available Ideal for research, testing, and development applications Technical data – Testing system Feature / Value Overall height of testing system 1215 mm (without clamping device) Width of testing system 2005 mm Depth of testing system 1205 mm Maximum force amplitude 10 kN Maximum total force ±20 kN Accuracy of measuring sensors min. Class 1 (according to DIN EN 10002-3) Technical data – Control cabinet Feature / Value Overall height of control cabinet approx. 1800 mm Height of tabletop 1080 mm Width of control cabinet 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Depth of control cabinet 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight 152 kg (small tabletop) 187 kg (large tabletop) with (granite plate) 247 kg Conditions for the installation site Feature / Value Space requirement 4.3 × 3.0 m Required ceiling height 2.5 m Floor load-bearing capacity 234 N/cm² Mains conditions Feature / Value Voltage 400 V three-phase with neutral conductor and protective earth Phase sequence Right-rotating field Voltage fluctuations ≤ ±10 % Short-time dips < 20 ms Limits for sustained disturbances Radio interference level A according to VDE 0871 Frequency 50 Hz ± 1 % Protective earth / Grounding resistance < 0.3 Ω Connection and protection Feature / Value Voltage supply 400 V / 50 Hz (Right-rotating field) Connection plug CEE socket, 5-pole, 16 A Protection 16 A Weight of testing system approx. 3.6 t Max. weight clamping device 250 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Zwick   Type: BZ1.0 / TH1S   Zwick table-top testing machine   Zwick with a maximum force of 1.0 kN.   Crosshead travel: 1150 mm. Testing speed: 0.1 ... 1800 mm/min   Scope of supply: (See images)   (Changes and errors in the technical data are subject to change!) Ndsdpfx Ahozdryzs Ssc   We would be happy to answer any further questions you may have by phone.

Condition: used, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision, industrial 3D measuring and testing system for in-process and quality control in manufacturing. Nodpfxezix Nms Ah Sodc The Equator 500 is not a conventional coordinate measuring machine, but a comparative measuring system specifically designed for fast, repeatable measurements directly in the production environment. Ideal for serial production, in-process measurements, and automated inspection processes. The device is ideally suited for dimensional, form, and positional tolerance testing of workpieces and can be used to provide feedback to CNC machines. The software starts correctly, system status according to the display: "Started OK" (see photos). Functions & Applications 3D measurement of workpieces Comparative measuring principle (very fast inspection cycles) High repeatability in the µm range Real-time temperature compensation Suitable for shop floor use Automation capable (e.g. robot loading) Ideal for serial, sample, and process control Typical industries: CNC manufacturing Metalworking Automotive / supplier industry Machine and tool building Technical data (manufacturer's data / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: Ø approx. 500 mm Z: approx. 150 mm Measuring principle: Comparative coordinate measuring technology Temperature-compensated measurement Accuracy: Very high repeatability Measuring accuracy in the µm range (application and strategy dependent) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical data Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power consumption: approx. 1 kW Dimensions (approx.) Overall height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.) 130 kg Condition: used Scope of delivery: (See image) Renishaw Equator™ 500 measuring system Controller / Industrial PC Monitor Keyboard and mouse Base frame Accessories as shown in the photos (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Pressing force 80 tons Nsdpoz A Ia Ssfx Ah Sodc Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS control system with back gauge Own weight 8800 kg without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are likely lost. Weight 7300 kg (on the nameplate) Weight 8800 kg (weighed on the crane) in good condition

Condition: good (used), Year of construction: 2014, Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Each unit includes 1 Nordson ProBlue 4 hot melt adhesive applicator and 4 liters of hot melt adhesive. Weight: approx. 1,500 kg Dimensions according to documentation: approx. 3,741 x 1,718 mm and height approx. 2,800 mm (including operating light, which can be unscrewed). For carton dimensions: 600 x 400 x 400 mm (can be changed with a different tool). 400V, 8kW, 15A, 3 phases Condition: good Available: from approximately Q4/2026 Nsdpfx Ahozbyn Ns Sodc Location: Hamburg A video of the machine is available!

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 64,000 h, machine/vehicle number: S1631C0027, laser hours: 40,000 h, laser power: 3,000 W, Equipment: cooling unit, documentation/manual, safety light barrier, For sale – TRUMPF TruLaser Cell 8030 L60 (2015) | 3D laser cutting system Professionally dismantled and stored – ready for immediate pick-up. The machine ran in series production until shutdown, was serviced annually and exclusively by TRUMPF, and has now been professionally dismantled by us and stored at our site in Gouzeaucourt (northern France). Ideal for automotive, aerospace and general metalworking requiring precise 3D contour cutting of tubes, hydroformed parts and complex profiles. Machine data - Model: TRUMPF TruLaser Cell 8030 L60, year 2015 - Laser power: 3,000 W (TRUMPF) - Serial number: S1631C0027 - Maintenance: annual service exclusively by TRUMPF – full documentation available - Status: dismantled, stored, ready for pick-up Key benefits - 5-axis CNC kinematics for demanding 3D geometries - Enclosed, automation-ready working area Ndjdpfx Aho Ad Hcne Soc - Proven in one-off and medium series production - Complete TRUMPF service history – no third-party interventions Our added value: modular handover We are not a dealer but an active contract manufacturer (SOERMEL Groupe, France – IATF 16949 / EN 9100 / ISO 9001). Choose the package that fits: M1 – Ex works: pick-up at our site in Gouzeaucourt, loading onto your truck. M2 – Delivered: M1 + international transport, insurance, unloading at your site (DAP/DDP on request). M3 – Delivered & installed: M2 + mechanical installation, utility connection, first start-up, laser alignment. M4 – Turnkey: M3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol. Inspection of the stored machine in Gouzeaucourt by appointment. Price on request.

Condition: good (used), Year of construction: 2024, The complete system was acquired in 2024 and used only during a short-term clinical study. Certain individual components may bear manufacture dates from 2023, which is normal for a multi-component system. Manufacturer: Optos Model: California / P200DTx Configuration: FA – Fluorescein Angiography Condition: Pre-owned, very limited use After the study was completed, the system was professionally disassembled and prepared for transport. It is currently securely packed and palletized in its original transport packaging. The Optos California is a high-end, ultra-widefield retinal imaging system, capable of capturing up to 200° of the retina in a single image, with an exposure time of less than 0.4 seconds. Configuration: Optos California P200DTx imaging system Touchscreen tablet with stand Image server with monitor Nedpfxjz Dq Sto Ah Sjdc Dedicated Optos device table Color RG imaging Red-free imaging Choroidal imaging Green autofluorescence Fluorescein angiography (FA) Technical highlights: optomap plus resolution: 14 μm optomap resolution: 20 μm DICOM compatible 100–240 VAC, 50/60 Hz Inspection available by appointment. Worldwide insured shipping can be arranged. Software license, activation, and login credentials are not included; these must be arranged directly with Optos by the purchaser.