Used Hydraulic Cold Press for sale (26,549)

Condition: new, Year of construction: 2019, pressing force: 110 t, pressure:110 t stroke:400 mm weight of the machine ca.:4,5 t dimensions:ca. 1650 x 1150 x 2800 mm return capacity:11 t total power requirement:11 kW Max Working height:500 mm :10 mm :10 mm/sec. speed rapid traverse:10 mm/sec :400 mm pestle plate:600 x 500 mm table plate:800 x 700 mm Dwodpfxefxygte Anzsa Table cut-out:150 x 150 mm table height over floor:900 mm :250 l Monitor SIEMENS:7 Zoll Side trim:2.800,- ? :4.800,- ? Light barriers front and back:2.400,- ?

Condition: new, Year of construction: 2019, machine/vehicle number: DF0287, pressing force: 25 t, pressure:25 t passage width:1000 mm stroke:800 mm Weight of machine approx.:4 t dimensions:ca. 2054 x 2200 x 3126 mm return capacity:2 t :5 kW Max Working height:800 mm :80 mm/sec :10 mm/sec. Dwjdpfxjfxyikj Anzja :80 mm/sec :800 mm pestle plate:400 x 400 mm table plate:1000 x 800 mm table height over floor:850 mm Table cut-out:650 x 150 mm :200 l pestle is stabilized by 4 per ø 50 mm chrome-plated linear guides:Bronzeführungen pestle strength:122 mm Steel plate on spring rolls:600 x 400 x 15 mm :S7 1200 Lightcurtains by Schmersal:1800 mm ab Boden Monitor:SIEMENS 10 Zoll Installation table on the left of the machine body with 10mm thick plage-milled steel plates:1000 x 800, 850 hoch mm

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: DF0195 - Rev.00, pressing force: 40 t, pressure:40 t passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm motor capacity:12,7 kW Approaching Speed max. :140 mm/sec pressure speed:15 mm/sec Return Speed:140 mm/sec Dwodefhcc Hjpfx Anzoa Oil Tank Capacity:160 l Monitor:WEG - 10 Zoll Siemens Control System:S7 1200

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: DF0150, pressing force: 63 t, pressure:63 t passage width:700 mm stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Dwjdefhcc Uopfx Anzsa Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0369, pressing force: 220 t, pressure:220 t passage width:1500 mm stroke:400 mm weight of the machine ca.:5,2 t Dedsfxyivspfx Anzswa dimensions:ca. 4000 x 1950 x 2900 mm return capacity:20 t total power requirement:30 kW Max Working height:500 mm :10 mm :10 mm/sec. Return Speed:25 mm/sec speed rapid traverse:10 mm/sec pestle plate:2000 x 400 mm table plate:2000 x 600 mm table height over floor:900 mm :500 l Oil cooling (electric):1,5 kW (max) measuring system:TURCK oder Balluff :S7 1500 oder PILZ PSS 4000 Monitor SIEMENS:oder OMRON

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, power: 17 kW (23.11 HP), pressing force: 220 t, stroke length: 180 mm, throat depth: 420 mm, total width: 3,650 mm, total height: 2,900 mm, overall weight: 17,900 kg, Hydraulic press brake Manufacturer: AMADA, Type: HFB 220-30 H Year of manufacture: 1991 Technical data Manufacturer: AMADA Type: HFB 220-30 H Year of manufacture: 1991 Press force: 220 tons Bending length: 3100 mm Stroke: max. 180 mm Overhang: 420 mm Distance between side supports: 2750 mm Power: 17 kW Dimensions: L 3,65 m, W 1700 mm, H 2900 mm Weight: 12.9 t Dsdpjy T R Ryofx Anzewa Equipment • Delem DA 58 2-D graphics control system • Controlled axes: Y1, Y2, X, R1, R2, Z • Large tool package, see photos • Amada quick-release tool clamping system All information is provided without warranty. A live demonstration is possible at any time in our showroom.

Condition: good (used), Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor Djdpfx Aovgu Hajnzowa -Pressure force: 10 ton -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 118 x 315 mm -Weight: 11.2 kg Dwedpfsfnk I Eex Anzoa

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm Dodpfx Aeyzd I Uenzowa -Weight: 4440 kg

Condition: good (used), Hydraulic press, two-column press, oil hydraulic press -Pulley pressing force: 65 tons -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. insertion height: 295 mm -Max. width: 300 mm -Max. stroke: 220 mm -with safety cage -Max. feed rate: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg Djdpfxsb I Dqaj Anzowa

Condition: good (used), Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm Dwedpfsupbdgex Anzsa -Weight: 826 kg

Condition: ready for operation (used), Hydraulic press, single-column high-speed press, C-column press, oil-hydraulic press - Pressing force of the ram: approx. 35 tons -Clamping table: 500 x 470 mm -Insertion height: 650 mm -Insertion width: 275 mm Dwjdjb A Nkbepfx Anzja -Dimensions: 1300/900/H3200 mm -The machine can be dismantled to a height of: 2700 mm -Weight: approx. 1500 kg

Condition: good (used), Hydraulic press, single column press, C-column press, oil hydraulic press, hydraulic single column press, press machine, hydraulic punch for Schüco tools hydraulic press, multifunctional punch, punch, universal punch, punching machine -Hydraulic press: Hydraulic single-column press with stops on both sides -Pressing force: 15 tons -Hydraulic unit: 220 bar stroke: 25 mm Dwjdsu Scp Rspfx Anzea -Hole: Ø 28 mm -Projection: 100 mm -Operation: foot pedal -Installation dimensions: 2575/800/H1350 mm -Transport dimensions: 1260/800/H1350 mm -Weight: 223 kg

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo Dwedevu Sqxopfx Anzja -Dimensions: Ø 120 x 330 mm -Weight: 11.4 kg

Condition: good (used), Year of construction: 1984, machine/vehicle number: 054-008-212, Offer 25272 Technical data: - Max. pressing force: 25 t Dwedpfx Aey Ewtrsnzja - Max. ram stroke: 500 mm - Stroke speed: 0 – 2.4 m/min - Return speed: 0 – 12 m/min - Installation height: 800 mm - Throat depth to ram center: 360 mm - Ram clamping area: 440 x 360 mm - Ram mounting shank: 40 mm - Table size: 630 x 500 mm - Table bore/opening: 180 mm - Electric foot switch - Two-hand control panel - Drive: 400 V / 8.75 kW - Required space approx.: W 800 x H 2750 x D 1150 mm - Weight approx.: 2000 kg

Condition: good (used), Year of construction: 1981, machine/vehicle number: 022-009-36, Offer 24374 Technical Data: - Max. pressing force: 100 t Dedpexuhzcefx Anzowa - Max. ram stroke approx.: 500 mm - Stroke speed: 25 mm/sec - Return speed: 125 mm/min - Installation height approx.: 1000 mm - Throat depth (to ram center): 380 mm - Ram clamping surface: 530 x 400 mm - Ram clamping pin: 40 mm - Table size: 750 x 560 mm - Table bore / through-hole: 200 mm - Table height above floor: 720 mm - Oil capacity approx.: 200 ltr - Drive: 400 V / 11 kW - Space requirements approx.: W 1150 x H 3250 x D 1850 mm - Weight approx.: 4600 kg

Condition: used, Year of construction: 1959, Serial No. 670/848, pressing force 150 t, travel distance 30 mm, travel time 190 ms, light curtain, manufacturer SICK, type LVU 1106-0021 +++ Attention: This machine is part of an online auction! +++ Djdozkav Dspfx Anzowa

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 200 mm, retraction force: 10 t, overall weight: 5,700 kg, operating pressure: 250 bar, installation height: 450 mm, pressure: 250 bar, We offer this used Lauffer RPT100 hydraulic press, year of manufacture 1992. Machine type: RPT100 Machine no.: 14161 Year of manufacture: 1992 Weight: 5,700 kg Maximum pressing force top ram: 1,000 kN Maximum pressing force bottom ram: 100 kN Retraction force top ram: 100 kN Retraction force bottom ram: kN Maximum stroke top ram: 200 mm Maximum stroke bottom ram: 80 mm Maximum operating pressure: 250 bar Shut height: 450 mm Overrun stroke: 20 mm Overrun time: 84 ms Safety distance: 134 mm For sale is a hydraulic high-speed press from the quality manufacturer Maschinenfabrik LAUFFER GmbH & Co. KG. Technical specifications: Manufacturer: LAUFFER Designation: Hydraulic high-speed press / hydraulic down-stroke press Dodoywiyuspfx Anzewa Type: RPT 100 Year of manufacture: 1992 Factory no.: 14161 Pressing force: 1,000 kN (≈ 100 t) Operating pressure: 270 bar Stroke (ram): 307 mm Clamping area / table: 710 × 450 mm Clearance: 710 × 560 mm Distance from clamping area to ram: 450 mm Column spacing (according to card): 830 mm (width) / 280 mm (length side) Power requirement: 15 kW Pump delivery rate: 30 l/min Speed: 1,500 rpm Oil capacity: approx. 450 l Oil type: HLP 46 (DIN 51525) Condition / Inspection: Used machine from industrial stock. Inspection and collection by arrangement. Collection/logistics: Loading by crane included.

Condition: excellent (used), Year of construction: 2000, Manufacturer EMANUEL Model DEA 800 Year 2000 Condition Used Warehouse number Cod.0337 Power 800 tons Slide stroke 900 mm Approach speed mm/sec 400 mm Working speed at 100% mm/sec 15 mm Working speed at 50% mm/sec 31 Slide return speed mm/sec 400 mm Max. vertical clearance 1,500 mm Mold holder table size 2,500 x 1,500 mm Blankholder table size 2,380 x 970 mm Dsdowiidwopfx Anzewa Blankholder cushion - total force (ton) 600 tons Lower blankholder stroke 450 mm.

Condition: used, Double column press - Hydraulic Dsdpfxjudb Hcj Anzswa Manufacturer REPKON Model 2000/800 kN Condition used description Pressure 200 t Column width 1600 mm ram stroke - max. 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Pressing speed 42 mm/s at 40% mm/sec Pressing speed 20 mm/s at 100% mm/sec Die cushion pressure 800 kN Die cushion stroke 150 mm Die cushion speed to 68/ from 225 mm/sec Conversion year: 2001

Condition: good (used), Year of construction: 1986, machine/vehicle number: 057-016-47, Offer 26185 Technical specifications: - Maximum pressing force: 160 t - Maximum ram stroke: approx. 500 mm - Average working speed: approx. 92 mm/s - Return speed: 125 mm/s - Installation height: approx. 1000 mm - Overhang to center of ram: 360 mm - Ram mounting pin: 40 mm - Table size: 900 x 630 mm - Table bore/opening: 220 mm - Table height above floor: 720 mm - Oil capacity: approx. 200 liters - Drive: 400 V / 17 kW - Space requirement: approx. W 1150 x H 3600 x D 1850 mm - Weight: approx. 7500 kg Dsdpfxozn H Rvj Anzewa

Condition: good (used), Year of construction: 1970, pressure 80 t passage width 350 mm stroke 600 mm table dimension - longitudinal 400 mm dimensions of the machine ca. 1400 x 1050 x 2350 m Dedpsvwgqrjfx Anzowa

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec Dwjdoyif Nropfx Anzea rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: used, Year of construction: 2009, total length: 2,700 mm, total width: 1,700 mm, total height: 3,900 mm, Colour: Green Empty weight: 5.000 kg - Year: 2009 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: Workshop press - Press force [ton]: 200 - Min. stroke [mm]: 1 - Max. stroke [mm]: 1100 - Table length [mm]: 730 - Table width [mm]: 1900 - Transport dimensions: 2700mm x 1700mm x 3900mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dwsdezdnzhjpfx Anzsa Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2022, machine/vehicle number: 042-005844/1, overall weight: 8,000 kg, This ZEULENRODA PRESSTECHNIK PYE 100 F hydraulic single-column press is being auctioned off in our industrial auction / machine auction due to the closure of the J&S GmbH Automotive Technology - Presses and Metalworking site. You can find this and many other items on our platform. Dsdpfx Ajzk Ilaenzjwa Further machine data: ZEULENRODA PRESSTECHNIK PYE 100 F hydraulic single-column press, serial number 042-005844/1, year of manufacture 2022, last service 10/2025, machine in operation until 12/2025 Technical data of the press according to the nameplate: Nominal pressing force: 1000 kN Hydraulic pressure 260 bar Temperature range +15 to +35°C Nominal voltage 400 V Frequency 50 Hz Safety distance 192 mm Total weight 8,000 kg Functionality and technical data have not been tested Without further items/without additional accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND ATTENDING THE INSPECTION! Subject to change This lot is being auctioned off with reservation. After the auction closes, the seller will notify within 2 weeks whether the highest bid is accepted or not. We will inform you as soon as possible.