Used Hydraulic Cold Press for sale (38,673)

Condition: new, die cushion press capacity: 30die cushion returning speed: 52die cushion stroke: 200daylight: 750pressure: 150stroke: 500 Prjdpfx Asd Ab Ilodied

Condition: as good as new (ex-display), Year of construction: 2022, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Podpfx Adjph Uk Noisrd Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: good (used), Year of construction: 1979, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Prjdpfexr Azxex Adiod Video about functionality available

Condition: new, pressure 30 t stroke 350 mm table surface area Arbeitsbreite 750 x 260 mm pressure 221 bar oil volume 37 dm³ work speed max. 9,8 mm/sec return speed 14 mm/sec total power requirement 3 kW weight of the machine ca. 385 kg Inner diameter of the cylinder [mm]: 130 Piston rod diameter [mm]: 55 Diameter piston head [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Working table adjustable in height - Joystick to control piston and speed Prsdpfx Adoi A S I Deiod The workshop press (30T) has a fixed cylinder and a high adjustable work table (motorized). Equipped with pressure regulation, Pressure gauge, variable speed and a joystick to move the piston up and down to move off. With this joystick you can also control the speed adjust, making this motorized hydraulic press perfect for precision work is suitable.

Condition: ready for operation (used), Year of construction: 1982, functionality: limited functionality, machine/vehicle number: Fabrik Nr.2977, total height: 2,300 mm, table height: 850 mm, total width: 1,300 mm, total length: 1,300 mm, pressing force: 10 t, table width: 400 mm, table length: 500 mm, ram plate width: 360 mm, ram plate length: 220 mm, distance table to ram: 400 mm, stroke length: 110 mm, For sale: Hydraulic press – Manufacturer: Hans Schoen Model: SH-C Year of manufacture: 1982 Pressure: 100 kN Motor power: 3 kW Safety distance: 120 mm Overrun: 15 mm Ram pinhole Ø40 mm Safety light curtain not functioning! Condition: The machine was in regular operation until recently and is in perfect working order. Psdpfx Adoxwaumjiord This robust hydraulic press from Hans Schoen is ideally suited for a range of industrial applications requiring precise pressing force. It is distinguished by its reliable performance and durability.

Condition: good (used), Year of construction: 1977, Druck 250 t Staenderweite 1120 mm Hub 250 mm Entfernung Tisch/Stoessel, gr. Hub oben, Verst. oben 500 mm Tischflaeche 1100 x 900 mm Tischhoehe ueber Flur 950 mm Predsx Ug Dspfx Adiod seitlicher Staenderdurchgang 700 mm Stoesselflaeche 1100 x 900 mm Geschwindigkeit ab mm/s Geschwindigkeit auf mm/s Arbeitsgeschwindigkeit mm/s Ölinhalt 730 l Antriebsleistung 56 kW Gewicht 25 t Raumbedarf (BxTxH) 2,3 x 1,55 x 3,96 m Zusatzinformationen u mit oelhydr. Antrieb, hydr. (§20) und elektr. Steuerung nach UVV, Lichtschranke (Sick), obere und untere Hubbegrenzung, druck- und wegabhaengig steuerbar, Schnittschlagdaempfung, Kurzhubsteuerung, neue Steuerung (Mitsubishi), Sicherheitssteuerung (PNOZ Multi), Bildschirmsteuerung mit Touch-Screen, Schaltschrank

Condition: new, die cushion press capacity: ohne Prsdpfx Aded Ab Ipsiod

Condition: good (used), Year of construction: 1981, machine/vehicle number: 022-009-36, Offer 24374 Technical Data: - Max. pressing force: 100 t - Max. ram stroke approx.: 500 mm - Stroke speed: 25 mm/sec - Return speed: 125 mm/min - Installation height approx.: 1000 mm - Throat depth (to ram center): 380 mm - Ram clamping surface: 530 x 400 mm - Ram clamping pin: 40 mm - Table size: 750 x 560 mm - Table bore / through-hole: 200 mm Prodsxuhzcopfx Adied - Table height above floor: 720 mm - Oil capacity approx.: 200 ltr - Drive: 400 V / 11 kW - Space requirements approx.: W 1150 x H 3250 x D 1850 mm - Weight approx.: 4600 kg

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Prodpfx Adexr Azfjisd Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Clamping table changed! Not an original table!

Condition: new, pressure 60 t stroke 380 mm table surface area Arbeitsbreite 750 mm pressure 259 bar Prsdpoi A S I Isfx Adisd oil volume 38 dm³ ajustment speed 2,87 mm/sec work speed 9,5 mm/sec return speed 12 mm/sec total power requirement 2,2 kW weight of the machine ca. 540 kg Inner diameter of the cylinder [mm]: 170 Piston rod diameter [mm]: 75 Diameter piston crown [mm]: 100 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with 2 speeds - Working table adjustable in height - Joystick to move the piston up / down The 60 ton workshop press has a fixed cylinder and a height-adjustable work table (motorized). Equipped with Pressure regulation, manometer, 2 speeds and a joystick for the move the piston up and down. With this joystick you can use the piston precisely move, making this hydraulic press perfect for precision jobs suitable.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: Fabrik Nr.3206, total height: 2,720 mm, table height: 950 mm, total width: 1,300 mm, total length: 1,300 mm, pressing force: 16 t, table width: 300 mm, table length: 500 mm, ram plate width: 360 mm, ram plate length: 220 mm, distance table to ram: 390 mm, stroke length: 165 mm, Equipment: safety light barrier, For sale: Hydraulic press – Manufacturer: Hans Schoen Type: SH-C Year of manufacture: 1983 Pressure: 160 kN Motor power: 3 kW Safety distance: 130 mm Run-on distance: 13 mm Podpfxoxv U Ure Adierd Plunger pin hole Ø40mm Condition: The machine has been in regular operation until recently and functions flawlessly. This robust hydraulic press from Hans Schoen is ideally suited for use in a range of industrial applications requiring precise pressing force. It stands out for its reliable performance and durability.

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Podpfx Aov Rwu Ujdierd Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: new, pressure: 100motor: 11daylight: 500stroke lenght (max.): 400Tappet adjustment: 790 x 600table height: Fußboden zu Tischplatte Oberkannte - 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200Demonstration machine, year of manufacture 2023 Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 barControl / Key Switch Modes:Setup Mode – Manual operation without light sensor Podpewrkctsfx Adierd Automatic Mode – Full speed with integrated light sensor Hydraulic System:Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 pcs, Ø 50 x 30 mm Auxiliary Guides: 2 pcs, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc, 23 L/min – Helical gear pump Speed:Approach: 110 mm/sec Return: 200 mm/sec Pressure phase: 9 mm/sec Machine Dimensions:Daylight Opening: 500 mm Stroke Length: 400 mm Ram Plate: 790 x 600 mm (with T-slots) Table Plate: 790 x 600 mm (with T-slots) Table Height: 850 mm (from floor to top of table) Hydraulic Equipment:REXROTH hydraulic control block & components Pressure adjustable via PLC (20 – 100 tons) Speed adjustable via PLC Air oil cooler Pre-fill valve Pressure hold valve Control System:Siemens S7-1200 PLC Main control cabinet Safety PLC (SICK) Light curtains (SICK – 700 mm) Linear encoder for stroke adjustment 10” PLC touchscreen – BEIJER (German & English) Movable two-hand control unit Ethernet connection for remote support Visual and acoustic fault alarms Dual work area lighting In full compliance with EN 693 machine safety regulations Side safety doors (outward opening) Hydraulic proportional valves Dual-channel safety control User manual & parts list (German) Oil Volume: 220 L (Tank capacity: 250 L)Total Weight: approx. 5,500 kgOverall Dimensions: 1300 x 2000 x 2750 mmColor: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Besichtigung unter Strom bei uns in Böheimkirchen 3071 (Neustiftgasse 34) möglich.

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Psdpfx Aexr Ay Usdijrd Motor power: 3 kW

Condition: new, Year of construction: 2022, pressure 200 t stroke 400 mm table surface area Arbeitsbreite 1300 mm pressure 243 bar oil volume 64 dm³ ajustment speed 5,73 mm/sec work speed 1,84 mm/sec return speed 7,08 mm/sec Prjdpfx Ast I D Thodied total power requirement 3,0 kW weight of the machine ca. 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted.

Condition: new, pressure: 60stroke: 250total power requirements: 7,5weight approx.: 4000messurements (LxWxH): 1.820 x 960 x 2.400table diamension: 750 x 500tappet area: 500 x 430drilling on table: 100daylight: 450working speed: 8,5retracting speed: 47rapid traverse: 26 Pedpsd Ab Ixjfx Adiord

Condition: new, pressure 100 t stroke 380 mm table surface area 1740 x 996 mm pressure 258 bar ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec dayligth 700 mm table height 720 mm total power requirement 2,2 kW weight of the machine ca. 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all Pedpfx Aoi Db Eredisrd allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The quality of these hydraulic straightening presses is very high. Over and beyond is the hydraulic unit with a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: new, pressure: 100stroke: 500table area: 800x600daylight: 615rapid traverse: 26working speed: 4motor: 4messurements (LxWxH): 1600 x 900 x 2300weight approx.: 3100Features:Two-stage hydraulic pump – integrated into the machine frame Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Prsdpewwxz Uefx Adisd Adjustable maximum pressure – adaptable to different tasks Integrated pressure gauge – for precise pressure monitoring during operation

Condition: new, pressure 100 t Psdoi A S I Sopfx Adiord stroke 380 mm table surface area Arbeitsbreite 1100 mm pressure 258 bar oil volume 46 dm³ ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec total power requirement 2,2 kW weight of the machine ca. 970 kg Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: new, pressure: 125motor: 22daylight: 500stroke lenght (max.): 400table diamension: 800 x 600 x 120tappet area: 800 x 600 x 300table height: 850messurements (LxWxH): 1.600 x 2.000 x 3.200weight approx.: 7.000oil filling: 400 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 220mm. Auxiliary cylinder: 2 pcs. Ø 70 x 40mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 15kw. - 22hp. ( IE-3 ) Pump: 48Liter / ASC. Speed : flow 120mm./sec. - return 140mm./sec. - Pressure : 13mm - 5mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 x 120mm. - (with T - grooves) Plunger plate: 800 x 600 x 300mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) Pjdpfx Ajmr Hpcsdisrd ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, pressure 28.0 t throat 225 mm stroke 150 mm table surface area 325 x 300 mm work speed 2.0 - 9.8 mm/sek return speed 12.8 mm/sek total power requirement 4.0 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge Pjdjg Igpnopfx Adierd - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools

Condition: new, More technical data on request ht curtain manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to CE rules Pedpfxjd Ab Igo Adierd press force:150 tohydraulic pressure:254 bartable:1200 x 750 mmram dimension:950 x 650 mmhole in table:120 mmstroke:300 mmdistance ram-table:550 mmrapid speed:100 mm/sworking speed:5,5 mm/sreturn speed:165 mmmotor:11 kWlength:2.225 mmwidth:1.600 mmheigth:3.650 mmweight:8.200 kg

Condition: new, drilling on table: 120die cushion returning speed: 52die cushion stroke: 200die cushion press capacity: 30motor power: 11retracting speed: 165working speed: 8,5rapid traverse: 100daylight: 750pressure: 100tappet measurements: 900 x 600table diamension: 1100 x 700messurements (LxWxH): 2.180 x 1.600 x 3.350weight approx.: 9300total power requirements: 11stroke: 500 Prjdsd Ab Imspfx Adied

Condition: new, pressure: 100stroke: 300total power requirements: 7,5weight approx.: 5400messurements (LxWxH): 1900 x 1300 x 2750table diamension: 1100 x 600tappet area: 680 x 420drilling on table: 120daylight: 500working speed: 5,5retracting speed: 37rapid traverse: 17,5 Psdpfx Aed Ab Iysdiord

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Prodpfx Adswzzzfsied Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg